(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

OSG Screw Hole Related Tools(Work Material:Low-Carbon Steel (C Content of 0.25% or Less))

Search by specifying the lower class category

Days to Ship
  • All
  • Same day
  • 6 Days or Less
  • 8 Days or Less
  • 9 Days or Less
  • 10 Days or Less
  • 11 Days or Less
  • 12 Days or Less
  • 13 Days or Less
  • 14 Days or Less
  • 16 Days or Less
Brand
Product Series
Days to Ship
Thread Types
Thread Size (Nominal)
Pitch (P), Thread Count(mm)
Number of Chamfered Threads (Lcf)
Tool Material Type
Work Material
Tap Model
Bore Model
Coating Presence
Coating Type
Overall Length (L)(mm)

    Spiral Flute Taps - Model A Series, V Coated, A-SFT

      Thread Mills - Carbide, Small Diameter, WH-VM-PNC, Planet Cutter Series

        Forming Taps - TiN Coated, Grooveless, TIN-NRT

          Forming Taps - X Performer, Grooveless, S-XPF

            Forming Taps - VP New Roll, Grooveless, VP-NRT

              Forming Taps - for Steels, Oxidized, Grooveless, NRT

                Spiral Flute Taps - High Speed Steel, Deep Hole Machining, MS-DH-SFT

                  Thread Mills - Carbide, WX-PNC, Planet Cutter Series NC

                    Spiral Point Taps - Synchro Taps, JIS Shank, TiN Coated, J-HS-RFT

                      Spiral Point Taps - High Speed Steel, V Coated, A-POT, Model A Series

                        Spiral Flute Taps - Blind Hole Machining, High Speed Steel, CC-SUS-SFT

                          Spiral Flute Taps - Blind Hole Machining, TiN Coated, TIN-SFT

                            Spiral Flute Taps - TiN Coated, Long Shank, TIN-LT-SFT

                              Spiral Flute Taps - High Speed Steel, V Coated, V-SFT

                                Spiral Flute Taps - General Purpose, Oxidized, EX-H-SFT

                                  Spiral Flute Taps - Blind Hole Machining, TiN Coated, HS-SFT

                                    Spiral Flute Taps - Synchro Taps, Blind Hole Machining, Long Shank, HS-LT-SFT

                                      Hand Taps - High Speed Steel, Oxidized, H-HT

                                        Thread Mills - Cobalt High Speed Steel, PNGT, Planet Cutter Series MC

                                          Thread Mills - Carbide, TiAlN Coated, WXO-ST-PNC

                                            Spiral Point Taps - High Speed Steel, TiN Coated, TIN-POT

                                              Spiral Point Taps - TiN Coated, Long Shank, TIN-LT-POT

                                                Spiral Point Taps - High Speed Steel, V Coated, V-POT

                                                  Spiral Point Taps - V Coated, Long Shank, V-LT-POT

                                                    Spiral Point Taps - High Speed Steel, Oxidized, EX-H-POT

                                                      Spiral Point Taps - Synchro Taps, TiN Coated, HS-RFT

                                                        Spiral Point Taps - Synchro Taps, Long Shank, HS-LT-RFT

                                                          Spiral Point Taps - High Speed Steel, Deep Hole Machining, EX-DH-POT

                                                            Spiral Point Taps - High Speed Steel, Through Hole Use, EX-SS-POT

                                                              Taper Pipe Taps - High Speed Steel, TiN Coated, TIN-TPT

                                                                Taper Pipe Taps - High Speed Steel, Interrupted Threads, TiN Coated, TIN-IRT

                                                                  Taper Pipe Taps - TiN Coated, Interrupted Threads, Short Screw, TIN-S-IRT

                                                                    Taper Pipe Taps - High Speed Steel, TiN Coated, Short Screw, TIN-S-TPT

                                                                      Taper Pipe Taps - Interrupted Threads, Long Shank, EX-LT-IRT

                                                                        Taper Pipe Taps - Interrupted Threads, Short Screw, EX-S-IRT

                                                                          Taper Pipe Taps - Interrupted Threads, Short Screw, Long Shank, EX-LT-S-IRT

                                                                            Parallel Pipe Taps - New Roll Tap, Oxidized, NRT-SPT

                                                                              Parallel Pipe Taps - High Speed Steel, Oxidized, H-SPT

                                                                                Forming Taps - TiCN Coated, Grooveless, IT-NRT

                                                                                  Forming Taps - TiN Coated, Grooveless, Long Shank, TIN-LT-NRT

                                                                                    Forming Taps - UM New Roll, Grooveless, UM-NRT

                                                                                      Forming Taps - VP New Roll, Short Chamfer, VP-SC-NRT

                                                                                        Forming Taps - VP New Roll, Grooveless, Long Shank, VP-LT-NRT

                                                                                          Forming Taps - V Coated, for Thin Plate Use, V-SS-NRT

                                                                                            Forming Taps - High Speed Steel, Grooveless, HRT

                                                                                            Brand

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            OSG

                                                                                            Product Series

                                                                                            Spiral Flute Taps - Model A Series, V Coated, A-SFT

                                                                                            Thread Mills - Carbide, Small Diameter, WH-VM-PNC, Planet Cutter Series

                                                                                            Forming Taps - TiN Coated, Grooveless, TIN-NRT

                                                                                            Forming Taps - X Performer, Grooveless, S-XPF

                                                                                            Forming Taps - VP New Roll, Grooveless, VP-NRT

                                                                                            Forming Taps - for Steels, Oxidized, Grooveless, NRT

                                                                                            Spiral Flute Taps - High Speed Steel, Deep Hole Machining, MS-DH-SFT

                                                                                            Thread Mills - Carbide, WX-PNC, Planet Cutter Series NC

                                                                                            Spiral Point Taps - Synchro Taps, JIS Shank, TiN Coated, J-HS-RFT

                                                                                            Spiral Point Taps - High Speed Steel, V Coated, A-POT, Model A Series

                                                                                            Spiral Flute Taps - Blind Hole Machining, High Speed Steel, CC-SUS-SFT

                                                                                            Spiral Flute Taps - Blind Hole Machining, TiN Coated, TIN-SFT

                                                                                            Spiral Flute Taps - TiN Coated, Long Shank, TIN-LT-SFT

                                                                                            Spiral Flute Taps - High Speed Steel, V Coated, V-SFT

                                                                                            Spiral Flute Taps - General Purpose, Oxidized, EX-H-SFT

                                                                                            Spiral Flute Taps - Blind Hole Machining, TiN Coated, HS-SFT

                                                                                            Spiral Flute Taps - Synchro Taps, Blind Hole Machining, Long Shank, HS-LT-SFT

                                                                                            Hand Taps - High Speed Steel, Oxidized, H-HT

                                                                                            Thread Mills - Cobalt High Speed Steel, PNGT, Planet Cutter Series MC

                                                                                            Thread Mills - Carbide, TiAlN Coated, WXO-ST-PNC

                                                                                            Spiral Point Taps - High Speed Steel, TiN Coated, TIN-POT

                                                                                            Spiral Point Taps - TiN Coated, Long Shank, TIN-LT-POT

                                                                                            Spiral Point Taps - High Speed Steel, V Coated, V-POT

                                                                                            Spiral Point Taps - V Coated, Long Shank, V-LT-POT

                                                                                            Spiral Point Taps - High Speed Steel, Oxidized, EX-H-POT

                                                                                            Spiral Point Taps - Synchro Taps, TiN Coated, HS-RFT

                                                                                            Spiral Point Taps - Synchro Taps, Long Shank, HS-LT-RFT

                                                                                            Spiral Point Taps - High Speed Steel, Deep Hole Machining, EX-DH-POT

                                                                                            Spiral Point Taps - High Speed Steel, Through Hole Use, EX-SS-POT

                                                                                            Taper Pipe Taps - High Speed Steel, TiN Coated, TIN-TPT

                                                                                            Taper Pipe Taps - High Speed Steel, Interrupted Threads, TiN Coated, TIN-IRT

                                                                                            Taper Pipe Taps - TiN Coated, Interrupted Threads, Short Screw, TIN-S-IRT

                                                                                            Taper Pipe Taps - High Speed Steel, TiN Coated, Short Screw, TIN-S-TPT

                                                                                            Taper Pipe Taps - Interrupted Threads, Long Shank, EX-LT-IRT

                                                                                            Taper Pipe Taps - Interrupted Threads, Short Screw, EX-S-IRT

                                                                                            Taper Pipe Taps - Interrupted Threads, Short Screw, Long Shank, EX-LT-S-IRT

                                                                                            Parallel Pipe Taps - New Roll Tap, Oxidized, NRT-SPT

                                                                                            Parallel Pipe Taps - High Speed Steel, Oxidized, H-SPT

                                                                                            Forming Taps - TiCN Coated, Grooveless, IT-NRT

                                                                                            Forming Taps - TiN Coated, Grooveless, Long Shank, TIN-LT-NRT

                                                                                            Forming Taps - UM New Roll, Grooveless, UM-NRT

                                                                                            Forming Taps - VP New Roll, Short Chamfer, VP-SC-NRT

                                                                                            Forming Taps - VP New Roll, Grooveless, Long Shank, VP-LT-NRT

                                                                                            Forming Taps - V Coated, for Thin Plate Use, V-SS-NRT

                                                                                            Forming Taps - High Speed Steel, Grooveless, HRT

                                                                                            Days to Ship 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more Same day

                                                                                            Show Stock Products

                                                                                            Same day or more

                                                                                            Show Stock Products

                                                                                            Same day

                                                                                            Show Stock Products

                                                                                            8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more Same day or more

                                                                                            Show Stock Products

                                                                                            8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more
                                                                                            Thread TypesMeter / UnifiedMeter / UnifiedMeter / UnifiedMeterMeter / UnifiedMeterMeterMeter / Unified / Pipe TaperMeterMeter / UnifiedMeterMeterMeterMeterMeterMeterMeterMeterMeter / Pipe Taper / Pipe ParallelMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterPipe TaperPipe TaperPipe TaperPipe TaperPipe TaperPipe TaperPipe TaperPipe ParallelPipe ParallelMeter / UnifiedMeterMiniatureMeter / UnifiedMeter / UnifiedMeterMeter
                                                                                            Thread Size (Nominal)1-8UNC ~ M56-No0UN ~ M20M1 ~ M45M1 ~ M12M1.2 ~ M10M2.6 ~ M10-M3 ~ M141/2-20UNF ~ M24M2 ~ M6M1.4 ~ M16M3 ~ M16M3 ~ M16M5 ~ M24M5 ~ M10M3 ~ M10M4 ~ M16--M1.4 ~ M42M3 ~ M24M5 ~ M10M4 ~ M6M2 ~ M42M3 ~ M14M3 ~ M30M2.5 ~ M10M2 ~ M12R1 ~ R3/8R1 ~ R3/8R1 ~ R3/8R1 ~ R3/8R1 ~ R3/8R1 ~ R3/8R1 ~ R3/8PF3/8G1/2M1 ~ No4UNM3 ~ M12S0.5 ~ S0.9M1 ~ No6UNM1 ~ M12M4 ~ M6M1.4 ~ M3.5
                                                                                            Pitch (P), Thread Count(mm)0.25 ~ 5.50.25 ~ 320.25 ~ 800.2 ~ 4.50.25 ~ 560.25 ~ 1.250.45 ~ 1.51 ~ 280.5 ~ 20.25 ~ 30.4 ~ 10.3 ~ 20.5 ~ 20.5 ~ 20.8 ~ 30.8 ~ 1.50.5 ~ 1.50.7 ~ 1.751 ~ 190.5 ~ 30.3 ~ 4.50.5 ~ 30.8 ~ 1.250.7 ~ 10.4 ~ 4.50.5 ~ 20.5 ~ 3.50.45 ~ 1.250.4 ~ 1.7511 ~ 2811 ~ 2811 ~ 2811 ~ 2811 ~ 2811 ~ 2811 ~ 2819140.25 ~ 560.5 ~ 1.75.02 ~ 0.2250.25 ~ 560.25 ~ 560.7 ~ 10.3 ~ 0.6
                                                                                            Number of Chamfered Threads (Lcf)1.5P ~ 2.5P-2P ~ 4P2P ~ 4P2P ~ 4P2P ~ 4P2.5P-5P5P2.5P2.5P2.5P2.5P2.5P3P3P1.5P ~ 5P--5P5P5P5P5P6P6P4P5P2.5P2.5P2.5P2.5P2.5P2.5P2.5P2.5P4P2P2P ~ 4P2P1P2P ~ 4P8P2.5P
                                                                                            Tool Material TypePowdered High-Speed Steel / Vanadium High-Speed SteelCarbideVanadium High-Speed SteelPowdered High-Speed Steel / Vanadium High-Speed SteelPowdered High-Speed SteelHigh-Speed SteelVanadium High-Speed SteelCarbideVanadium High-Speed SteelPowdered High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelCobalt High-Speed SteelCarbideVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelCarbideVanadium High-Speed SteelCarbideCarbideCarbideHigh-Speed SteelHigh-Speed SteelPowdered High-Speed SteelVanadium High-Speed SteelPowdered High-Speed SteelPowdered High-Speed SteelPowdered High-Speed SteelVanadium High-Speed SteelHigh-Speed Steel
                                                                                            Work MaterialLow-Carbon Steel (C Content of 0.25% or Less)[○]Low-Carbon Steel (C Content of 0.25% or Less)[○]Low-Carbon Steel (C Content of 0.25% or Less)[○]Low-Carbon Steel (C Content of 0.25% or Less)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[○]Low-Carbon Steel (C Content of 0.25% or Less)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[○]Low-Carbon Steel (C Content of 0.25% or Less)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[○]Low-Carbon Steel (C Content of 0.25% or Less)[○]Low-Carbon Steel (C Content of 0.25% or Less)[○]Low-Carbon Steel (C Content of 0.25% or Less)[○]Low-Carbon Steel (C Content of 0.25% or Less)[○]Low-Carbon Steel (C Content of 0.25% or Less)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[○]Low-Carbon Steel (C Content of 0.25% or Less)[○]Low-Carbon Steel (C Content of 0.25% or Less)[○]Low-Carbon Steel (C Content of 0.25% or Less)[○]Low-Carbon Steel (C Content of 0.25% or Less)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[○]Low-Carbon Steel (C Content of 0.25% or Less)[○]Low-Carbon Steel (C Content of 0.25% or Less)[○]Low-Carbon Steel (C Content of 0.25% or Less)[○]Low-Carbon Steel (C Content of 0.25% or Less)[○]Low-Carbon Steel (C Content of 0.25% or Less)[○]Low-Carbon Steel (C Content of 0.25% or Less)[○]Low-Carbon Steel (C Content of 0.25% or Less)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[○]Low-Carbon Steel (C Content of 0.25% or Less)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[○]
                                                                                            Tap ModelSpiral TapTapping CutterRolled TapRolled TapRolled TapRolled TapSpiral TapTapping CutterPoint TapPoint TapSpiral TapSpiral TapSpiral TapSpiral TapSpiral TapSpiral TapSpiral TapHand TapTapping CutterTapping CutterPoint TapPoint TapPoint TapPoint TapPoint TapPoint TapPoint TapPoint TapPoint TapPipe TapPipe TapPipe TapPipe TapPipe TapPipe TapPipe TapPipe TapPipe TapRolled TapRolled TapRolled TapRolled TapRolled TapRolled TapRolled Tap
                                                                                            Bore ModelFor Blind HolesFor Through Holes / For Blind HolesFor Blind HolesFor Through Holes / For Blind HolesFor Blind HolesFor Through Holes / For Blind HolesFor Blind HolesFor Through Holes / For Blind HolesFor Through HolesFor Through HolesFor Blind HolesFor Blind HolesFor Blind HolesFor Blind HolesFor Blind HolesFor Blind HolesFor Blind HolesFor Through Holes / For Blind HolesFor Through Holes / For Blind HolesFor Through Holes / For Blind HolesFor Through HolesFor Through HolesFor Through HolesFor Through HolesFor Through HolesFor Through HolesFor Through HolesFor Through HolesFor Through HolesFor Through Holes / For Blind HolesFor Through Holes / For Blind HolesFor Through Holes / For Blind HolesFor Through Holes / For Blind HolesFor Through Holes / For Blind HolesFor Through Holes / For Blind HolesFor Through Holes / For Blind HolesFor Through Holes / For Blind HolesFor Through Holes / For Blind HolesFor Blind HolesFor Through Holes / For Blind HolesFor Blind HolesFor Blind HolesFor Blind HolesFor Through HolesFor Blind Holes
                                                                                            Coating PresenceIncludedIncludedIncludedIncludedIncludedNoneNoneIncludedIncludedIncludedIncludedIncludedIncludedIncludedNoneIncludedIncludedNoneIncludedIncludedIncludedIncludedIncludedIncludedNoneIncludedIncludedNoneNoneIncludedIncludedIncludedIncludedNoneNoneNoneNoneNoneIncludedIncludedIncludedIncludedIncludedIncludedNone
                                                                                            Coating TypeOthersFor High Hardness (Silicone-Based) / OthersTiNTiCNTiCNNon-CoatedNon-CoatedTiAlNTiNOthersTiNTiNTiNOthersNon-CoatedTiNTiNNon-CoatedTiNTiAlNTiNTiNTiCNTiCNNon-CoatedTiNTiNNon-CoatedNon-CoatedTiNTiNTiNTiNNon-CoatedNon-CoatedNon-CoatedNon-CoatedNon-CoatedTiCNTiNCrNTiCNTiCNTiCNNon-Coated
                                                                                            Overall Length (L)(mm)34 ~ 2504030 ~ 10530 ~ 22030 ~ 8232 ~ 7544 ~ 7560 ~ 12046 ~ 8834 ~ 12040 ~ 6234 ~ 95100 ~ 15046 ~ 9560 ~ 12060 ~ 75100 ~ 15052 ~ 9580 ~ 21060 ~ 12034 ~ 175100 ~ 20060 ~ 7510040 ~ 17546 ~ 88100 ~ 20044 ~ 7540 ~ 8255 ~ 9555 ~ 9555 ~ 9555 ~ 95120 ~ 15055 ~ 95120 ~ 150658030 ~ 4680 ~ 1503030 ~ 6260 ~ 20052 ~ 6234 ~ 48

                                                                                            Loading...

                                                                                            Related Categories to Screw Hole Related Tools