(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
OSG Screw Hole Related Tools（Bore Model：For Blind Holes）
Search by specifying the lower class category
Dies
Forming Taps
Hand Taps
Pipe Taps
Spiral Point Taps
Spiral Flute Taps
Thread Mills
Threading Repair & Extraction Tools
Threading Tools
| Days to Ship |
|
|---|
-
- On Sale Till 15/12/2024
Hand Taps - Through Hole/Blind Hole Use, HT
OSG
An HSS hand tap.
For complete product overview and details on Hand Taps - Through Hole/Blind Hole Use, HT see the sections below:- Volume Discount
Special Price Days to Ship: Same day or more Show Stock Products
-
Spiral Flute Taps - Model A Series, V Coated, A-SFT
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. A spiral tap with a spiral groove mainly used for blind holes.
- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - X Performer, Grooveless, S-XPF
OSG
There are no chipping problems compared to cutting taps for carbon steel and alloy steel, enabling long life machining. Especially useful for processing automotive forged steel parts.
* M2.6 or below can be changed to powder HSS (CPM) at any time. We ask for your understanding in advance.- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - General Purpose, High Speed Steel, EX-SFT
OSG
Used for drilling blind holes. For carbon steel, steel alloy, and nonferrous metal, this is suitable for cutting materials where the metal waste forms a continuous coil.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - General Purpose, Long Shank, EX-LT-SFT
OSG
For standard spiral taps, it is used when the protruding length of the screw is insufficient.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - High Speed Steel for Hard-to-Cut Material, Long Shank, CPM-LT-SFT
OSG
The work material is ideal for blind hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 35 HRC
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Hand Taps - Carbide, Through Hole/Blind Hole Use, OTT
OSG
Ideal for tapping large amounts of ordinary cast iron, high-rigidity cast iron, thermosetting resin, brass cast iron, etc., using a high-precision automatic machine.
- Volume Discount
Days to Ship: 8 Days or more -
Taper Pipe Taps - High Speed Steel, Blind Hole Machining, SFT-TPT
OSG
Used to process tapered female pipe threads, suitable for blind holes or processing conditions where scraping occurs easily.
- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - TiN Coated, Grooveless, TIN-NRT
OSG
Steel and non-ferrous alloys are equally suitable. Capable of high-speed cutting, features greatly improved durability, and provides high-efficiency tapping.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - General Purpose, Left Hand Thread, EX-SFT-L
OSG
[Specifications]
· Shape: Spiral Tap
· Screw type: metric
· Chamfer threads: 2.5 P
· Work Material: Medium Carbon Steel (0.25 to 0.45% carbon alloy) [○] / Alloy Steel (SCM) [○] / Ductile Iron (FCD) [○] / Copper (Cu) [○] / Brass (Bs) [○] / Brass Cast Iron (BsC) [○] / Bronze (PB) [○] / Aluminum Rolled Material (AL) [○] / Aluminum Alloy Casting (AC, ADC) [○] / Magnesium Alloy Casting (MC) [○] / Zinc Alloy Casting (ZDC) [○] / Thermoplastic Plastic (Vinyl Chloride, Nylon, Etc.) [○]- Volume Discount
Days to Ship: 8 Days or more -
Spiral Point Taps - HR Coated for Nickel Alloys, WHR-NI-POT
OSG
The application of an HR coating with a high melt sticking resistance to nickel-base alloys achieves a long life even on age hardened nickel-base alloys (40 to 45 HRC)
- Volume Discount
Days to Ship: 8 Days or more -
Threading Tools - Spatter Removal Hand Tap, SR-HT
OSG
Ideal for removing welding spatter and chips from the interior of female screws
- Volume Discount
Days to Ship: 8 Days or more -
Hand Taps - for Stainless Steels, Oxidized, EX-SUS-HT
OSG
Suitable for stainless steel, heat resistant steel, nickel manganese steel, and others. Suitable for carbon steel and alloy steel materials.
- Volume Discount
Days to Ship: Same day Show Stock Products
-
Thread Mills - Carbide, WX-PNC, Planet Cutter Series NC
OSG
If the pitch is the same, it can process threads with different nominals. Additionally, both right-handed and left-handed screws can be machined.
- Volume Discount
Days to Ship: 8 Days or more -
- On Sale Till 15/12/2024
Taper Pipe Taps - High Speed Steel, TiCN Coated, V-XPM-TPT
OSG
Used to process tapered female pipe threads, suitable for blind holes or processing conditions where scraping occurs easily.
- Volume Discount
Special Price Days to Ship: Same day or more Show Stock Products
-
Taper Pipe Taps - High Speed Steel, Long Shank, Short Screw, LT-SFT-S-TPT
OSG
Used to process tapered female pipe threads, suitable for blind holes or processing conditions where scraping occurs easily.
- Volume Discount
Days to Ship: 8 Days or more -
Taper Pipe Taps - High Speed Steel, Through Hole/Blind Hole Use, TPT
OSG
Used to process tapered female pipe threads. Long thread type mainly used for connecting pipes
- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - TiCN Coated, Grooveless, IT-NRT
OSG
As powder HSS and special screws are used, a long machining life is provided for a wide range of work materials
- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - for Steels, Oxidized, Grooveless, NRT
OSG
Molds screws by plastic distortion, suitable for low carbon steel, low carbon alloy steel, stainless steel, etc. with large elongation. Cutting chips are not expelled so it is especially good for blind holes
- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - for Non-Ferrous Alloys, Grooveless, B-NRT
OSG
Suitable for metals such as aluminum, zinc, and copper and non-ferrous alloys of these materials.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - Blind Hole Machining, High Speed Steel, CC-SUS-SFT
OSG
Achieves female thread machining of stainless steel using water-soluble cutting fluid
- Volume Discount
Days to Ship: 8 Days or more -
Thread Mills - Carbide, Small Diameter, WH-VM-PNC, Planet Cutter Series
OSG
Planet cutter that can be used to make small female threaded M1 to M5 holes by milling. Ideal for preventing defects in workpieces with high added value and for tapping without pilot holes
- Volume Discount
Days to Ship: 8 Days or more -
Hand Taps - Carbide, for Hardened Steels, WH55-OT
OSG
Ideal for tapping hardened steel up to 55 HRC
- Volume Discount
Days to Ship: 8 Days or more -
Forming Taps - Fluteless for Non-Ferrous Metals, Long Shank, HL-LT-B-NRT
OSG
Suitable for increasing the life of the tap or as a countermeasure against chipping, while cutting aluminum (cast, rolled and forged) and other light alloys.
- Volume Discount
Days to Ship: 8 Days or more -
Hand Taps - High Speed Steel, Straight Fluted, HL-HT
OSG
Used for thread tapping of female threads by inserting the helical coil. Compared to ordinary taps of the same nominal size, the outer diameter is made larger according to the size of the insert even though the pitch is the same.
- Volume Discount
Days to Ship: 8 Days or more -
Hand Taps - High Speed Steel, Long Shank, HL-LT
OSG
Used for thread tapping of female threads by inserting the helical coil. Compared to ordinary taps of the same nominal size, the outer diameter is made larger according to the size of the insert even though the pitch is the same.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - Blind Hole Machining, TiN Coated, TIN-SFT
OSG
Machined with a tapped thread length of 2D or less, it is well suited for tapping low and medium carbon steel and stainless steel using a water-soluble cutting agent.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - TiN Coated, Long Shank, TIN-LT-SFT
OSG
Machined with a tapped thread length of 2D or less, it is well suited for tapping low and medium carbon steel and stainless steel using a water-soluble cutting agent.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - High Speed Steel, V Coated, VP-SFT
OSG
Ideal for machining alloy steel and pre-hardened steel of 35 to 42 HRC
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - High Speed Steel, V Coated, V-SFT
OSG
Can be used with a wide range of soft and hard materials. Particularly suitable for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - For Aluminum, EX-AL-SFT
OSG
Ideal for tapping blind holes in non-ferrous metals such as aluminum and its alloys and die-casting, etc.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - Synchro Taps for Aluminum, HS-AL-SFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision female threading of aluminum and aluminum alloy.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - Short Chamfer Type, EX-SC-SFT
OSG
Bite length of 1.5 peaks. Ideal for when the effective thread length cannot be obtained in a blind hole with general spiral taps of 2.5-thread biting length
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - Deep Hole Machining, High Speed Steel, SUS-DH-SFT
OSG
Ideal for deep-hole processing of stainless steel over 2D
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - Blind Hole Machining, High Speed Steel, EX-SUS-SFT
OSG
Suitable for blind holes for stainless steel, heat resistant steel, nickel chromium manganese steel, etc. Well suited for materials such as carbon steel, alloy steel, etc.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - High Speed Steel, Long Shank, EX-LT-SUS-SFT
OSG
Suitable for blind holes for stainless steel, heat resistant steel, nickel chromium manganese steel, etc. Well suited for materials such as carbon steel, alloy steel, etc.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - High Speed Steel, Low Spiral, LW-SFT
OSG
The low helical grooves discharge chips backward while cutting them finely to achieve stable screw tapping. Features excellent anti-chipping as well.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - General Purpose, Oxidized, EX-H-SFT
OSG
Used for drilling blind holes. For carbon steel, steel alloy, and nonferrous metal, this is suitable for cutting materials where the metal waste forms a continuous coil.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - Blind Hole Machining, TiN Coated, HS-SFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision blind-hole tapping.
- Volume Discount
Days to Ship: Same day Show Stock Products
-
Spiral Flute Taps - Synchro Taps, Blind Hole Machining, Long Shank, HS-LT-SFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision blind-hole tapping.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Spiral Flute Taps - Blind Hole Machining, High Speed Steel, EX-HC-SFT
OSG
Suitable for blind hole machining in high carbon materials such as medium carbon steel and higher, die steel, alloy steel, etc.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - Carbide Spiral Fluted, OT-SFT
OSG
Ideal for tapping a large number of blind holes with high precision automatic machines, etc. in aluminum alloys, magnesium alloys, copper alloys, thermoplastic, etc.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - For Copper, CrN Coated, CU-SFT
OSG
CrN coating with superior wear resistance and anti-weldability for copper has been applied, with HSSE material used to achieve a long machining life for copper.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - High Speed Steel, Deep Hole Machining, MS-DH-SFT
OSG
Suitable for cases where damage to the tap due to jamming of chips and galling of female threads are likely to occur in a blind hole.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Flute Taps - High Speed Steel for Hard-to-Cut Material, CPM-SFT
OSG
The work material is ideal for blind hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 35 HRC
- Volume Discount
Days to Ship: Same day Show Stock Products
| Brand |
|---|
| Product Series |
| Days to Ship |
| Thread Types |
| Thread Size (Nominal) |
| Pitch (P), Thread Count(mm) |
| Number of Chamfered Threads (Lcf) |
| Tool Material Type |
| Work Material |
| Tap Model |
| Bore Model |
| Coating Presence |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | Spiral Flute Taps - General Purpose, High Speed Steel, EX-SFT | Spiral Flute Taps - High Speed Steel for Hard-to-Cut Material, Long Shank, CPM-LT-SFT | Taper Pipe Taps - High Speed Steel, Blind Hole Machining, SFT-TPT | Spiral Flute Taps - General Purpose, Left Hand Thread, EX-SFT-L | Taper Pipe Taps - High Speed Steel, Long Shank, Short Screw, LT-SFT-S-TPT | Taper Pipe Taps - High Speed Steel, Through Hole/Blind Hole Use, TPT | Spiral Flute Taps - Blind Hole Machining, High Speed Steel, CC-SUS-SFT | Thread Mills - Carbide, Small Diameter, WH-VM-PNC, Planet Cutter Series | Forming Taps - Fluteless for Non-Ferrous Metals, Long Shank, HL-LT-B-NRT | Spiral Flute Taps - Blind Hole Machining, TiN Coated, TIN-SFT | Spiral Flute Taps - Deep Hole Machining, High Speed Steel, SUS-DH-SFT | Spiral Flute Taps - Blind Hole Machining, High Speed Steel, EX-SUS-SFT | Spiral Flute Taps - High Speed Steel, Long Shank, EX-LT-SUS-SFT | Spiral Flute Taps - Blind Hole Machining, TiN Coated, HS-SFT | Spiral Flute Taps - Synchro Taps, Blind Hole Machining, Long Shank, HS-LT-SFT | Spiral Flute Taps - Blind Hole Machining, High Speed Steel, EX-HC-SFT | Spiral Flute Taps - High Speed Steel, Deep Hole Machining, MS-DH-SFT | Spiral Flute Taps - High Speed Steel for Hard-to-Cut Material, CPM-SFT | |||||||||||||||||||||||||||
| Days to Ship |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day
Show Stock Products |
| Thread Types | Meter / Unified | Meter / Unified | Meter | Meter / Unified | Meter | Meter | Meter | Pipe Taper | Meter / Unified | Meter | Meter | Meter | Meter | Meter / Unified / Pipe Taper | Pipe Taper | Pipe Taper | Pipe Taper | Meter / Unified | Meter | Meter | Meter | Meter / Unified | Meter | Meter | Unified | Unified | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter / Unified / Wit | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter |
| Thread Size (Nominal) | M1 ～ M35 | 1-8UNC ～ M56 | M1 ～ M45 | 1/2UN ～ M36 | M2.5 ～ M20 | M6 ～ M16 | M1.4 ～ M20 | R1 ～ R3/8 | No0UN ～ M20 | M24 ～ M30 | M8 | M5 ～ M12 | M3 | - | R1 ～ R3/8 | R1/2 ～ R3/8 | R1"1/4 ～ R5/8 | M1 ～ No4UN | M1.2 ～ M10 | M8 ～ M20 | M2 ～ M24 | - | M3 ～ M12 | M8 | No8UN | No6UN | M1.4 ～ M16 | M3 ～ M16 | M3 ～ M12 | M3 ～ M16 | M8 | M2 ～ M6 | M12 ～ M22 | M2.6 ～ M10 | 1/2UN ～ M27 | M8 ～ M10 | M6 | M5 ～ M24 | M5 ～ M10 | M3 ～ M10 | M10 ～ M12 | M3 ～ M12 | M10 | M2.6 ～ M10 | M1.6 ～ M20 |
| Pitch (P), Thread Count(mm) | 0.25 ～ 40 | 0.25 ～ 5.5 | 0.2 ～ 4.5 | 0.35 ～ 40 | 0.45 ～ 2 | 1 ～ 2 | 0.3 ～ 2.5 | 11 ～ 28 | 0.25 ～ 80 | 3 ～ 3.5 | 1.25 | 0.8 ～ 1.25 | 0.5 | 1 ～ 28 | 11 ～ 28 | 14 ～ 28 | 11 ～ 14 | 0.25 ～ 56 | 0.25 ～ 1.25 | 1.25 ～ 1.5 | 0.4 ～ 3 | 0.25 ～ 32 | 0.5 ～ 1.75 | 1.25 | 32 | 32 | 0.3 ～ 2 | 0.5 ～ 2 | 0.5 ～ 1.75 | 0.5 ～ 2 | 1 | 0.4 ～ 1 | 1.75 ～ 2.5 | 0.45 ～ 1.5 | 0.45 ～ 40 | 1.25 ～ 1.5 | 1 | 0.8 ～ 3 | 0.8 ～ 1.5 | 0.5 ～ 1.5 | 1.25 ～ 1.5 | 0.5 ～ 1.75 | 1.5 | 0.45 ～ 1.5 | 0.35 ～ 2.5 |
| Number of Chamfered Threads (Lcf) | 1.5P ～ 9P | 1.5P ～ 2.5P | 2P ～ 4P | 2.5P ～ 3P | 2.5P | 3P | 1.5P ～ 3P | 2.5P | 2P ～ 4P | 2.5P | 5P | 5P | 1.5P | - | 3P | 2.5P | 2.5P | 2P | 2P ～ 4P | 4P | 2.5P | - | 2.5P ～ 5P | 2P | 5P | 1.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 3P | 1.5P | 2.5P | 2.5P | 2.5P | 2.5P | 2.5P | 3P | 3P | 3P | 1.5P ～ 2.5P | 2.5P | 2.5P | 3P |
| Tool Material Type | High-Speed Steel | Powdered High-Speed Steel / Vanadium High-Speed Steel | Powdered High-Speed Steel / Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powdered High-Speed Steel | Carbide | High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powdered High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | Powdered High-Speed Steel | High-Speed Steel | High-Speed Steel | Powdered High-Speed Steel | High-Speed Steel | High-Speed Steel | Vanadium High-Speed Steel | Carbide | Carbide | High-Speed Steel | High-Speed Steel | High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powdered High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Carbide | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powdered High-Speed Steel |
| Work Material | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] / Cast Steel (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] / Tool Steel (Before SKD Quenching)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○] / Nickel-Based Alloy (Inconel Equivalent)[○] | Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[◎] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermosetting Plastic (Bakelite, Phenol etc.)[◎] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Steel (SC)[○] / Cast Magnesium Alloy (MC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[◎] / Cast Steel (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Nickel-Based Alloy (Inconel Equivalent)[◎] | - | Stainless Steel (SUS)[◎] / Copper (Cu)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[◎] / Nickel-Based Alloy (Inconel Equivalent)[◎] / Thermosetting Plastic (Bakelite, Phenol etc.)[◎] / Thermoplastic (PVC, Nylon etc.)[◎] | Heat-Treated Steel (45 - 55 HRC)[◎] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Steel (SC)[○] / Cast Magnesium Alloy (MC)[○] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Stainless Steel (SUS)[○] / Copper (Cu)[○] | Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○/◎] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] / Heat-Treated Steel (45 - 55 HRC)[◎] / High-Hardness Steel (50 - 60 HRC)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass Cast Iron (BsC)[○/◎] / Rolled Aluminum Material (AL)[○/◎] / Cast Aluminum Alloy (AC, ADC)[○/◎] / Cast Magnesium Alloy (MC)[○/◎] / Zinc Alloy Castings (ZDC)[○/◎] / Titanium Alloy (Ti-6Al-4V Equivalent)[○/◎] / Nickel-Based Alloy (Inconel Equivalent)[◎] / Thermosetting Plastic (Bakelite, Phenol etc.)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Heat-Treated Steel (45 - 55 HRC)[◎] | Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[◎] | Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[◎] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[○] | Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[◎] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] | Stainless Steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic (PVC, Nylon etc.)[◎] | Stainless Steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic (PVC, Nylon etc.)[◎] | Stainless Steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic (PVC, Nylon etc.)[◎] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Cast Steel (SC)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Steel (SC)[○] / Copper (Cu)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Steel (SC)[○] / Copper (Cu)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Thermoplastic (PVC, Nylon etc.)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] | Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermosetting Plastic (Bakelite, Phenol etc.)[◎] / Thermoplastic (PVC, Nylon etc.)[○] | Stainless Steel (SUS)[○] / Copper (Cu)[◎] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Steel (SC)[◎] / Thermoplastic (PVC, Nylon etc.)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[○] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] / Tool Steel (Before SKD Quenching)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○] / Nickel-Based Alloy (Inconel Equivalent)[○] |
| Tap Model | Hand Tap | Spiral Tap | Rolled Tap | Spiral Tap | Spiral Tap | Spiral Tap | Hand Tap | Pipe Tap | Rolled Tap | Spiral Tap | Point Tap | Repair / Removal Tool | Hand Tap | Tapping Cutter | Pipe Tap | Pipe Tap | Pipe Tap | Rolled Tap | Rolled Tap | Rolled Tap | Spiral Tap | Tapping Cutter | Hand Tap | Rolled Tap | Hand Tap | Hand Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap | Spiral Tap |
| Bore Model | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes | For Blind Holes |
| Coating Presence | None | Included | Included | None | None | None | None | None | Included | None | Included | None | None | Included | Included | None | None | Included | None | Included | Included | Included | Included | Included | None | None | Included | Included | Included | Included | None | None | None | None | None | None | None | None | Included | Included | None | None | Included | None | None |
| Coating Type | Non-Coated | Others | TiCN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiN | Non-Coated | Others | Non-Coated | Non-Coated | TiAlN | TiCN | Non-Coated | Non-Coated | TiCN | Non-Coated | TiN | TiN / CrN | For High Hardness (Silicone-Based) / Others | TiCN | Non-Coated | Non-Coated | Non-Coated | TiN | TiN | TiCN | Others | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiN | TiN | Non-Coated | Non-Coated | CrN | Non-Coated | Non-Coated |
| Overall Length (L)(mm) | 30 ～ 135 | 34 ～ 250 | 30 ～ 220 | 36 ～ 155 | 80 ～ 250 | 100 ～ 150 | 34 ～ 105 | 55 ～ 95 | 30 ～ 105 | 120 ～ 135 | 70 | 60 ～ 80 | 46 | 60 ～ 120 | 59 ～ 109 | 100 ～ 150 | 82 ～ 105 | 30 ～ 46 | 32 ～ 75 | 70 ～ 105 | 40 ～ 120 | 40 | 46 ～ 82 | 150 | 60 | 100 | 34 ～ 95 | 100 ～ 150 | 46 ～ 82 | 46 ～ 95 | 70 | 40 ～ 62 | 82 ～ 115 | 44 ～ 75 | 44 ～ 130 | 150 | 62 | 60 ～ 120 | 60 ～ 75 | 100 ～ 150 | 75 ～ 82 | 46 ～ 82 | 75 | 44 ～ 75 | 36 ～ 105 |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Thread Types
- Meter
- Unified
- Wit
- Perforation
- Pipe Taper
- Pipe Parallel
- Miniature
- Others
-
Metric / Inch
- metric
-
Thread Size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No0UN
- S0.1
- No.10-32UNF
- No.10-24UNC
- No.12-28UNF
- No.12-24UNC
- S0.2
- No.2-64UNF
- No.2-56UNC
- S0.3
- No.3-56UNF
- No.3-48UNC
- S0.4
- No.4-48UNF
- No.4-40UNC
- S0.5
- No.5-44UNF
- No.5-40UNC
- No.6
- S0.6
- No.6-40UNF
- No.6-32UNC
- S0.7
- S0.8
- No.8-36UNF
- No.8-32UNC
- S0.9
- 1UN
- 1UNS
- G1
- M1
- NPS1
- NPT1
- NPTF1
- No1UN
- R1
- S1
- W1
- 1'-12UNF
- 1´-11
- 1-8UNC
- 1'-8UNC
- 1"1/2UN
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- R1"1/2
- W1"1/2
- 1 1/2-8UN
- 1"1/4UN
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- R1"1/4
- W1"1/4
- 1 1/4-8UN
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1 1/8-8UN
- 1"1/16UN
- 1/2UN
- G1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- R1/2
- Rc1/2
- W1/2
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- 1/2W12
- 1"3/4UN
- G1"3/4
- R1"3/4
- W1"3/4
- 1 3/4-8UN
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- G1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- R1/4
- Rc1/4
- SM1/4
- W1/4
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- 1/4W20
- W1"5/8
- 1 5/8-8UN
- W1"7/8
- 1 7/8-8UN
- 1'W8
- G1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- R1/8
- Rc1/8
- SM1/8
- W1/8
- 1/8-28
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- M1.1
- M1.2
- S1.2
- M1.4
- S1.4
- M1.6
- M1.7
- M1.8
- 2UN
- G2
- M2
- NPS2
- NPT2
- No2UN
- R2
- W2
- 2-8UN
- W2"1/4
- M2.2
- M2.3
- M2.5
- M2.6
- M3
- No3UN
- 3/4UN
- G3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- R3/4
- W3/4
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- 3/8UN
- G3/8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- R3/8
- Rc3/8
- W3/8
- 3/8-24UNF
- 3/8-19
- 3/8-16UNC
- 3/8W16
- M3～10
- SM3/16
- W3/16
- 3/16W24
- SM3/32
- M3.5
- M4
- No4UN
- №4-40UNC
- M4～6
- M4.5
- M5
- No5UN
- №5-40UNC
- 5/8UN
- G5/8
- NPS5/8
- R5/8
- W5/8
- 5/8-18UNF
- 5/8-11UNC
- 5/8W11
- 5/16UN
- W5/16
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- W5/32
- M5.5
- M6
- No6UN
- No6-40UNF
- №6-32UNC
- M7
- PG7
- 7/8UN
- G7/8
- NPS7/8
- R7/8
- W7/8
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16UN
- W7/16
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- M8
- No8UN
- №8-32UNC
- M9
- PG9
- 9/16UN
- 9/16-18UNF
- 9/16-12UNC
- 9/16W12
- SM9/32
- SM9/64
- M10
- No10UN
- №10-32UNF
- №10-24UNC
- M10～25
- M11
- PG11
- SM11/64
- M12
- No12UN
- M13
- PG13.5
- M14
- M15
- SM15/64
- M16
- PG16
- M17
- M18
- M19
- M20
- M21
- PG21
- M22
- M23
- M24
- M25
- M26
- M27
- M28
- PG29
- M30
- M32
- M33
- M34
- M35
- M36
- PG36
- M38
- M39
- M40
- M42
- PG42
- M45
- M48
- M56
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Pitch (P), Thread Count(mm)
-
Number of Chamfered Threads (Lcf)
-
Tool Material Type
-
Work Material
- Low-Carbon Steel (C Content of 0.25% or Less)
- Medium-Carbon Steel (C Content 0.25 - 0.45%)
- High-Carbon Steel (C Content Exceeding 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (SUS)
- Heat-Treated Steel (25 - 35 HRC)
- Heat-Treated Steel (35 - 45 HRC)
- Heat-Treated Steel (45 - 55 HRC)
- High-Hardness Steel (50 - 60 HRC)
- Tool Steel (Before SKD Quenching)
- Cast Steel (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass Cast Iron (BsC)
- Bronze (PB)
- Rolled Aluminum Material (AL)
- Cast Aluminum Alloy (AC, ADC)
- Cast Magnesium Alloy (MC)
- Zinc Alloy Castings (ZDC)
- Titanium Alloy (Ti-6Al-4V Equivalent)
- Nickel-Based Alloy (Inconel Equivalent)
- Thermosetting Plastic (Bakelite, Phenol etc.)
- Thermoplastic (PVC, Nylon etc.)
-
Tap Model
-
Bore Model
-
Coating Presence
-
Coating Type
-
Overall Length (L)(mm)
Narrow search by specifying Manufacturer
-
- MISUMI (13)
- OSG (106)
- YAMAWA (39)
- Nachi-Fujikoshi (9)
- GUHRING (3)
- SANDVIK (3)
- NOGA JAPAN (2)
- RUKO (1)
- Trusco Nakayama (1)
- ENGINEER (0)
- NEWSTRONG (0)
- Rennsteig Tools (0)
- ISHIHASHI (0)
- LIGHTSEIKI (0)
- UNION TOOL (0)
- NS TOOL (0)
- EIKOSHA (0)
- TANOI (0)
- ESCO (0)
- SKC (0)
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy