(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
OSG Screw Hole Related Tools（Tap Model：Point Tap）
Search by specifying the lower class category
Dies
Forming Taps
Hand Taps
Pipe Taps
Spiral Point Taps
Spiral Flute Taps
Thread Mills
Threading Repair & Extraction Tools
Threading Tools
| Days to Ship |
|
|---|
-
Spiral Point Taps - High Speed Steel, Oxidized, EX-H-POT
OSG
For standard point taps, it is used when the protruding length of the screw is insufficient.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Point Taps - HR Coated for Nickel Alloys, WHR-NI-POT
OSG
The application of an HR coating with a high melt sticking resistance to nickel-base alloys achieves a long life even on age hardened nickel-base alloys (40 to 45 HRC)
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Point Taps - High Speed Steel, TiN Coated, TIN-POT
OSG
Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Point Taps - TiN Coated, Long Shank, TIN-LT-POT
OSG
Features a wide range of uses, but especially suitable for high-speed tapping of stainless steel, tempered material, etc.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Point Taps - V Coated, Long Shank, V-LT-POT
OSG
Can be used with a wide range of soft and hard materials. Exhibits superb performance when used for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions. Also effective for dry tapping
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Point Taps - for Stainless Steels, Oxidized, EX-SUS-POT
OSG
Offers superb sharpness and durability. Can be used to drill holes in difficult-to-cut stainless steel.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Point Taps - High Speed Steel, Through Hole Use, EX-POT
OSG
For general use, ideal with carbon steel, alloy steel, and non-ferrous metals for cutting materials where the metal waste forms a continuous coil. Chips are reliably pushed forward so that they don't get in the way
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Point Taps - Synchro Taps, Long Shank, HS-LT-RFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Point Taps - High Speed Steel, V Coated, A-POT, Model A Series
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Point Taps - Oxidized, Long Shank, EX-LT-H-POT
OSG
[Specifications]
· Shape: Point tap
· Screw type: metric
· Work Material: Low Carbon Steel (less than 0.25% carbon alloy) [◎] / Medium Carbon Steel (0.25 to 0.45% carbon alloy) [○] / High Carbon Steel (over 0.45% carbon alloy) [○] / Alloy Steel (SCM) [○] / Cast Steel (SC) [○] / Thermoplastic Plastic (Vinyl Chloride, Nylon, etc.) [○]- Volume Discount
Days to Ship: 8 Days or more -
Spiral Point Taps - High Speed Steel, Long Shank, A-LT-POT, Model A Series
OSG
Thanks to its stable chip ejection capability, it can be used with various materials, as well as a wide range of cutting regions and devices. Point tap with point grooves used for through holes.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Point Taps - High Speed Steel, V Coated, V-POT
OSG
Can be used with a wide range of soft and hard materials. Exhibits superb performance when used for high-speed / high-dilution (water-soluble cutting fluid) tapping conditions. Also effective for dry tapping
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Point Taps - Synchro Taps for Aluminum, HS-AL-RFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision female threading of aluminum and aluminum alloy.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Point Taps - Stainless Steel, Long Shank, EX-LT-SUS-POT
OSG
With excellent sharpness and durability, it is used for stainless steel through holes where poor machinability is a problem.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Point Taps - High Speed Steel, Long Shank, EX-LT-POT
OSG
For standard point taps, it is used when the protruding length of the screw is insufficient.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Point Taps - Synchro Taps, TiN Coated, HS-RFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Point Taps - Synchro Taps, JIS Shank, TiN Coated, J-HS-RFT
OSG
Exclusively for machines with a full-lead feed mechanism, it is capable of high-speed, high-precision through-hole tapping.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Point Taps - High Speed Steel, Deep Hole Machining, EX-DH-POT
OSG
Particularly suitable for workpieces which are easily scorched because the screw tapping length is particularly long.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Point Taps - for Difficult-To-Cut Materials, Through Hole Use, CPM-POT
OSG
The work material is ideal for through hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Point Taps - for Difficult-To-Cut Materials, Long Shank, CPM-LT-POT
OSG
The work material is ideal for through hole drilling of high carbon steel, tool steel, forged alloy steel or tempered material with hardness of about 20 to 45 HRC
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Point Taps - High Speed Steel, Through Hole Use, EX-SS-POT
OSG
Ideal for tapping soft steel thin plates (through holes) with a tensile strength of 700 N/mm² or less. A beautiful finished surface is obtained as the generation of punch hole and bearing hole whiskers, flashes, or chipping can be kept to a minimum
- Volume Discount
Days to Ship: 8 Days or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Thread Types |
| Thread Size (Nominal) |
| Pitch (P), Thread Count(mm) |
| Number of Chamfered Threads (Lcf) |
| Tool Material Type |
| Work Material |
| Tap Model |
| Bore Model |
| Coating Presence |
| Coating Type |
| Overall Length (L)(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | Spiral Point Taps - for Stainless Steels, Oxidized, EX-SUS-POT | Spiral Point Taps - High Speed Steel, Through Hole Use, EX-POT | Spiral Point Taps - High Speed Steel, V Coated, A-POT, Model A Series | Spiral Point Taps - High Speed Steel, Long Shank, A-LT-POT, Model A Series | Spiral Point Taps - Stainless Steel, Long Shank, EX-LT-SUS-POT | Spiral Point Taps - Synchro Taps, JIS Shank, TiN Coated, J-HS-RFT | Spiral Point Taps - High Speed Steel, Deep Hole Machining, EX-DH-POT | Spiral Point Taps - for Difficult-To-Cut Materials, Through Hole Use, CPM-POT | Spiral Point Taps - for Difficult-To-Cut Materials, Long Shank, CPM-LT-POT | Spiral Point Taps - High Speed Steel, Through Hole Use, EX-SS-POT | |||||||||||
| Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
| Thread Types | Meter | Meter | Meter | Meter | Meter | Meter / Unified / Wit | Meter / Unified | Meter | Meter / Unified | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter | Meter |
| Thread Size (Nominal) | M2 ～ M42 | M8 | M1.4 ～ M42 | M3 ～ M24 | M4 ～ M6 | M1.4 ～ M24 | 1/2UN ～ M36 | M3 ～ M30 | 1/2-20UNF ～ M24 | M3 ～ M20 | M2 ～ M24 | M8 ～ M10 | M2 ～ M6 | M3 ～ M6 | M3 ～ M20 | M3 ～ M14 | M3 ～ M14 | M2.5 ～ M10 | M6 | M8 ～ M12 | M2 ～ M12 |
| Pitch (P), Thread Count(mm) | 0.4 ～ 4.5 | 1.25 | 0.3 ～ 4.5 | 0.5 ～ 3 | 0.7 ～ 1 | 0.3 ～ 44 | 0.3 ～ 44 | 0.5 ～ 3.5 | 0.25 ～ 3 | 0.5 ～ 2.5 | 0.25 ～ 3 | 1 ～ 1.25 | 0.4 ～ 1 | 0.5 ～ 1 | 0.5 ～ 2 | 0.5 ～ 2 | 0.5 ～ 2 | 0.45 ～ 1.25 | 1 | 1.25 ～ 1.75 | 0.4 ～ 1.75 |
| Number of Chamfered Threads (Lcf) | 5P | 5P | 5P | 5P | 5P | 4P | 5P | 6P | 5P | 5P | 5P | 5P | 6P | 4P | 5P | 6P | 5P | 4P | 5P | 5P | 5P |
| Tool Material Type | Vanadium High-Speed Steel | Powdered High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powdered High-Speed Steel | Vanadium High-Speed Steel | Powdered High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Vanadium High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Vanadium High-Speed Steel |
| Work Material | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Steel (SC)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Nickel-Based Alloy (Inconel Equivalent)[◎] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[◎] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[◎] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○/◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○] / Nickel-Based Alloy (Inconel Equivalent)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Stainless Steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic (PVC, Nylon etc.)[◎] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Heat-Treated Steel (35 - 45 HRC)[○] / Cast Steel (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Steel (SC)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Copper (Cu)[○] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎] | Stainless Steel (SUS)[◎] / Copper (Cu)[◎] / Thermoplastic (PVC, Nylon etc.)[◎] | Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Heat-Treated Steel (35 - 45 HRC)[○] / Cast Steel (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Heat-Treated Steel (35 - 45 HRC)[○] / Cast Steel (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / Alloy Steel (SCM)[○] / Cast Steel (SC)[○] / Thermoplastic (PVC, Nylon etc.)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] / Tool Steel (Before SKD Quenching)[◎] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○] / Nickel-Based Alloy (Inconel Equivalent)[○] | High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] / Tool Steel (Before SKD Quenching)[◎] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○] / Nickel-Based Alloy (Inconel Equivalent)[○] | Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Stainless Steel (SUS)[○] / Copper (Cu)[○] |
| Tap Model | Point Tap | Point Tap | Point Tap | Point Tap | Point Tap | Point Tap | Point Tap | Point Tap | Point Tap | Point Tap | Point Tap | Point Tap | Point Tap | Point Tap | Point Tap | Point Tap | Point Tap | Point Tap | Point Tap | Point Tap | Point Tap |
| Bore Model | For Through Holes | For Blind Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes | For Through Holes |
| Coating Presence | None | Included | Included | Included | Included | None | None | Included | Included | None | Included | Included | None | None | None | Included | Included | None | None | None | None |
| Coating Type | Non-Coated | Others | TiN | TiN | TiCN | Non-Coated | Non-Coated | TiN | Others | Non-Coated | Others | TiCN | Non-Coated | Non-Coated | Non-Coated | TiN | TiN | Non-Coated | Non-Coated | Non-Coated | Non-Coated |
| Overall Length (L)(mm) | 40 ～ 175 | 70 | 34 ～ 175 | 100 ～ 200 | 100 | 34 ～ 120 | 34 ～ 155 | 100 ～ 200 | 34 ～ 120 | 100 ～ 150 | 80 ～ 200 | 70 ～ 75 | 40 ～ 62 | 100 | 100 ～ 150 | 46 ～ 88 | 46 ～ 88 | 44 ～ 75 | 62 | 150 | 40 ～ 82 |
Loading...
Configure
Specification/Dimensions
-
Thread Types
- Meter
- Unified
- Wit
- Perforation
- Pipe Taper
- Pipe Parallel
- Miniature
- Others
-
Metric / Inch
- metric
-
Thread Size (Nominal)
- CTG-54
- CTG-42
- CTG-36
- CTG-28
- CTG-22
- CTG-16
- No0UN
- S0.1
- No.10-32UNF
- No.10-24UNC
- No.12-28UNF
- No.12-24UNC
- S0.2
- No.2-64UNF
- No.2-56UNC
- S0.3
- No.3-56UNF
- No.3-48UNC
- S0.4
- No.4-48UNF
- No.4-40UNC
- S0.5
- No.5-44UNF
- No.5-40UNC
- No.6
- S0.6
- No.6-40UNF
- No.6-32UNC
- S0.7
- S0.8
- No.8-36UNF
- No.8-32UNC
- S0.9
- 1UN
- 1UNS
- G1
- M1
- NPS1
- NPT1
- NPTF1
- No1UN
- R1
- S1
- W1
- 1'-12UNF
- 1´-11
- 1-8UNC
- 1'-8UNC
- 1"1/2UN
- G1"1/2
- NPS1"1/2
- NPT1"1/2
- R1"1/2
- W1"1/2
- 1 1/2-8UN
- 1"1/4UN
- G1"1/4
- NPS1"1/4
- NPT1"1/4
- R1"1/4
- W1"1/4
- 1 1/4-8UN
- 1"1/8UN
- G1"1/8
- R1"1/8
- W1"1/8
- 1 1/8-8UN
- 1"1/16UN
- 1/2UN
- G1/2
- NPS1/2
- NPT1/2
- NPTF1/2
- R1/2
- Rc1/2
- W1/2
- 1/2-20UNF
- 1/2-14
- 1/2-13UNC
- 1/2W12
- 1"3/4UN
- G1"3/4
- R1"3/4
- W1"3/4
- 1 3/4-8UN
- 1"3/8UN
- G1"3/8
- R1"3/8
- W1"3/8
- 1 3/8-8UN
- 1/4
- 1/4UN
- G1/4
- NPS1/4
- NPT1/4
- NPTF1/4
- R1/4
- Rc1/4
- SM1/4
- W1/4
- 1/4-28UNF
- 1/4-20UNC
- 1/4-19
- 1/4W20
- W1"5/8
- 1 5/8-8UN
- W1"7/8
- 1 7/8-8UN
- 1'W8
- G1/8
- NPS1/8
- NPT1/8
- NPTF1/8
- R1/8
- Rc1/8
- SM1/8
- W1/8
- 1/8-28
- G1/16
- NPS1/16
- NPT1/16
- R1/16
- M1.1
- M1.2
- S1.2
- M1.4
- S1.4
- M1.6
- M1.7
- M1.8
- 2UN
- G2
- M2
- NPS2
- NPT2
- No2UN
- R2
- W2
- 2-8UN
- W2"1/4
- M2.2
- M2.3
- M2.5
- M2.6
- M3
- No3UN
- 3/4UN
- G3/4
- NPS3/4
- NPT3/4
- NPTF3/4
- R3/4
- W3/4
- 3/4-16UNF
- 3/4-14
- 3/4-10UNC
- 3/4W10
- 3/8UN
- G3/8
- NPS3/8
- NPT3/8
- NPTF3/8
- PF3/8
- R3/8
- Rc3/8
- W3/8
- 3/8-24UNF
- 3/8-19
- 3/8-16UNC
- 3/8W16
- M3～10
- SM3/16
- W3/16
- 3/16W24
- SM3/32
- M3.5
- M4
- No4UN
- №4-40UNC
- M4～6
- M4.5
- M5
- No5UN
- №5-40UNC
- 5/8UN
- G5/8
- NPS5/8
- R5/8
- W5/8
- 5/8-18UNF
- 5/8-11UNC
- 5/8W11
- 5/16UN
- W5/16
- 5/16-24UNF
- 5/16-18UNC
- 5/16W18
- W5/32
- M5.5
- M6
- No6UN
- No6-40UNF
- №6-32UNC
- M7
- PG7
- 7/8UN
- G7/8
- NPS7/8
- R7/8
- W7/8
- 7/8-14UNF
- 7/8-9UNC
- 7/8W9
- 7/16UN
- W7/16
- 7/16-20UNF
- 7/16-14UNC
- 7/16W14
- M8
- No8UN
- №8-32UNC
- M9
- PG9
- 9/16UN
- 9/16-18UNF
- 9/16-12UNC
- 9/16W12
- SM9/32
- SM9/64
- M10
- No10UN
- №10-32UNF
- №10-24UNC
- M10～25
- M11
- PG11
- SM11/64
- M12
- No12UN
- M13
- PG13.5
- M14
- M15
- SM15/64
- M16
- PG16
- M17
- M18
- M19
- M20
- M21
- PG21
- M22
- M23
- M24
- M25
- M26
- M27
- M28
- PG29
- M30
- M32
- M33
- M34
- M35
- M36
- PG36
- M38
- M39
- M40
- M42
- PG42
- M45
- M48
- M56
- 1015
- 1020N100M
- 1020N150M
- 06510X28R
- 10154
- 12204
- 12254N100M
- 12254N150M
- 12254N200M
- 16304N100M
- 16304N150M
- 16304N200M
- 16304N250M
- 20305
- 20505N100M
- 20505N150M
- 20505N200M
- 20505N300M
- 20505N350M
- 25506N100M
- 25506N150M
- 25506N200M
- 25506N300M
- 25506N350M
- 32506
- 32506N150M
- 32506N200M
- 32506N300M
- 035083N075M
- 035083N080M
- 040123N100M
- 060163N050M
- 060163N100M
- 060163N125M
- 065103X28G
- 075203N125M
- 075203N150M
- 080153X19G
- 080153X19R
- 080203N050M
- 080203N100M
- 090244N125M
- 090244N175M
- 100254N050M
- 100254N100M
- 100254N150M
- 100254N200M
- 120204X14G
- 120204X14R
- 120304N100M
- 120304N150M
- 120304N200M
- 160264X11G
- 160264X11R
- 160404N150M
- 160404N200M
- 160404N250M
- 200305X11G
- 200305X11R
- 200505N150M
- 200505N200M
- 200505N300M
-
Pitch (P), Thread Count(mm)
-
Number of Chamfered Threads (Lcf)
-
Tool Material Type
-
Work Material
- Low-Carbon Steel (C Content of 0.25% or Less)
- Medium-Carbon Steel (C Content 0.25 - 0.45%)
- High-Carbon Steel (C Content Exceeding 0.45%)
- Alloy Steel (SCM)
- Stainless Steel (SUS)
- Heat-Treated Steel (25 - 35 HRC)
- Heat-Treated Steel (35 - 45 HRC)
- Heat-Treated Steel (45 - 55 HRC)
- High-Hardness Steel (50 - 60 HRC)
- Tool Steel (Before SKD Quenching)
- Cast Steel (SC)
- Cast Iron (FC)
- Ductile Cast Iron (FCD)
- Copper (Cu)
- Brass (Bs)
- Brass Cast Iron (BsC)
- Bronze (PB)
- Rolled Aluminum Material (AL)
- Cast Aluminum Alloy (AC, ADC)
- Cast Magnesium Alloy (MC)
- Zinc Alloy Castings (ZDC)
- Titanium Alloy (Ti-6Al-4V Equivalent)
- Nickel-Based Alloy (Inconel Equivalent)
- Thermosetting Plastic (Bakelite, Phenol etc.)
- Thermoplastic (PVC, Nylon etc.)
-
Tap Model
-
Bore Model
-
Coating Presence
-
Coating Type
-
Overall Length (L)(mm)
Narrow search by specifying Manufacturer
-
- MISUMI (3)
- OSG (21)
- YAMAWA (16)
- GUHRING (1)
- Nachi-Fujikoshi (1)
- Trusco Nakayama (1)
- ENGINEER (0)
- NEWSTRONG (0)
- Rennsteig Tools (0)
- RUKO (0)
- ISHIHASHI (0)
- LIGHTSEIKI (0)
- UNION TOOL (0)
- NS TOOL (0)
- SANDVIK (0)
- EIKOSHA (0)
- TANOI (0)
- NOGA JAPAN (0)
- ESCO (0)
- SKC (0)
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy