(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 7:00 p.m. 11/23/2024 to 5:00 p.m. (CST) 11/24/2024. We apologize for the inconvenience.
OSG Carbide Radius End Mill（Work Material：Heat-Treated Steel）
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
Carbide End Mill WX Super Coat (High Precision Bull Nose) WXS-CPR
OSG
High-precision bull nose (radius) end mill for shape processing of molds. High-speed cutting of hardened steel is also possible thanks to the WXS coating with excellent heat resistance.
- Volume Discount
Days to Ship: 8 Days or more -
Carbide End Mill, Phoenix (High Feed Bull Nose) PHX-CRT
OSG
Corner radius type with a low-resistance blade shape in order to increase the amount of cutting per blade. Unprecedented high-feed processing is possible.
- Volume Discount
Days to Ship: 8 Days or more -
Carbide Ultra FX Super End Mill (Corner Radius Short Type) FXS-CR-EMS
OSG
Radius end mill for high-speed processing with high rigidity. High speed machining of hardened steel is also possible.
- Volume Discount
Days to Ship: 8 Days or more -
2-Flute, Corner R Short Type CBN-CR-EDS
OSG
Excellent for machining high-hardness materials
- Volume Discount
Days to Ship: 8 Days or more -
2-Flute, Corner R Short Type FX-CR-MG-EDS
OSG
Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.
- Volume Discount
Days to Ship: 8 Days or more -
2-Flute, Corner R Long Type FX-CR-MG-EDL
OSG
Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.
- Volume Discount
Days to Ship: 8 Days or more -
Phoenix Pencil Neck Deep Feeder Radius PHX-PC-DFR
OSG
Adopts an ultra-heat-resistant and ultra-hard WXS coating
- Volume Discount
Days to Ship: 8 Days or more -
Carbide End Mill, Phoenix, Long Neck, Tough Radius PHX-LN-CRE
OSG
Adopts an ultra-heat-resistant and ultra-hard WXS coating
- Volume Discount
Days to Ship: 8 Days or more -
2-Flute, Corner R, Short Type GX-CR-EDS-SF
OSG
Carbide mushroom-shaped end mill with rounded corners developed for shrink-fit types.
- Volume Discount
Days to Ship: 8 Days or more -
2-Flute, Corner R Short Type FX-CR-EDS-6
OSG
End mill with rounded corners for high-speed machining that fully draws on the performance of high-speed/high-precision machining centers.
- Volume Discount
Days to Ship: 8 Days or more -
Carbide End Mill, Phoenix (Deep Feeder Radius) PHX-DFR
OSG
Adopts an ultra-heat-resistant and ultra-hard WXS coating
- Volume Discount
Days to Ship: 8 Days or more -
Carbide Ultra FX End Mill (Positive Corner Radius Type Multifunction) FX-CR-MG-EHS
OSG
The highly sharp, positive cutting blade prevents the occurrence of work-hardening. Supports various cutter paths due to the rounded corners.
- Volume Discount
Days to Ship: 8 Days or more -
4-Flute, Corner R, Long Type FX-CR-MG-EML
OSG
Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.
- Volume Discount
Days to Ship: 8 Days or more -
4-Flute, Unequal Lead, Corner R, Short, Strong Heavy-Cutting Model NEO-CR-PHS
OSG
Evolved "uneven lead" type effect suppresses chatter to realize astonishingly high efficiency machining.
- Volume Discount
Days to Ship: 8 Days or more -
WX21 Carbide End Mill (Super Radius) WX-CRE
OSG
A new type of radius end mill that achieves high-efficiency rough machining of molds. Capable of direct high-performance engraving of hardened steel.
- Volume Discount
Days to Ship: 8 Days or more -
Cermet End Mill (for Bottom Finishing) FX-MCF
OSG
Cermet base material + FX coating end mill for bottom finish. Provides a mirror finish at astoundingly high speeds.
- Volume Discount
Days to Ship: 8 Days or more -
Heavy Duty Multi-Function FXS-PKE
OSG
In addition to conventional coating properties, this coating has extremely high oxidation resistance to achieve high-speed machining.
- Volume Discount
Days to Ship: 8 Days or more -
Carbide Ultra FX Super End Mill (Strong Type Multifunction HS Shank) FXS-HS-PKE
OSG
Ideal for high-efficiency machining of pocket engraving with the minimum required blade length and strong torsion. Overall tool length which fits shrink-fit and HSK types perfectly.
- Volume Discount
Days to Ship: 8 Days or more -
WX21 Carbide End Mill, 4-Blade Short Rounded Corner High-Strength Heavy Cutting Type WX-CR-PHS
OSG
Next generation high torsion radius end mill with great chip discharge performance and high blade rigidity. Supports a wide range of cutter passes including ramping and profile processing in addition to normal 2D machining.
- Volume Discount
Days to Ship: 8 Days or more -
6-Flute, Unequal Lead, Corner R, Short NEO-CR-EMS
OSG
Evolved "uneven lead" type effect suppresses chatter to realize astonishingly high efficiency machining.
- Volume Discount
Days to Ship: 8 Days or more -
For Use with Vertical Walls, Multifunctional FXS-MFE
OSG
Capable of high-efficiency, high-precision machining of wide standing walls using step cutting
- Volume Discount
Days to Ship: 8 Days or more -
Long-Neck Deep Feeder Radius PHX-LN-DFR
OSG
Adopts an ultra-heat-resistant and ultra-hard WXS coating
- Volume Discount
Days to Ship: 8 Days or more -
CBN End Mill (Small Diam., 2-Flute, Corner Radius End Mill) CBN-SXR
OSG
The rounded 3D shape makes it resistant to chipping.
- Volume Discount
Days to Ship: 8 Days or more -
CBN End Mill (Small Diam., 2-Flute, Long-Neck Radius Type) CBN-LN-SXR
OSG
Blade uses a sintered CBN material.
- Volume Discount
Days to Ship: 8 Days or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Flute Diameter (D)(φ) |
| R Size(mm) |
| Work Material |
| Flute Length (ℓ)(mm) |
| Number of Flutes(sheet) |
| Model |
| Overall Length (L)(mm) |
| Link Diameter (d)(mm) |
| Length Under Neck (ℓ1)(mm) |
| Processing Applications |
| Coating |
| Helix Angle (Θ) |
| R Precision(µm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
| Product Series | Carbide End Mill WX Super Coat (High Precision Bull Nose) WXS-CPR | Carbide Ultra FX Super End Mill (Corner Radius Short Type) FXS-CR-EMS | Carbide End Mill, Phoenix, Long Neck, Tough Radius PHX-LN-CRE | Carbide Ultra FX End Mill (Positive Corner Radius Type Multifunction) FX-CR-MG-EHS | 4-Flute, Unequal Lead, Corner R, Short, Strong Heavy-Cutting Model NEO-CR-PHS | Carbide Ultra FX Super End Mill (Strong Type Multifunction HS Shank) FXS-HS-PKE | WX21 Carbide End Mill, 4-Blade Short Rounded Corner High-Strength Heavy Cutting Type WX-CR-PHS | CBN End Mill (Small Diam., 2-Flute, Corner Radius End Mill) CBN-SXR | CBN End Mill (Small Diam., 2-Flute, Long-Neck Radius Type) CBN-LN-SXR | |||||||||||||||
| Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
| Flute Diameter (D)(φ) | 0.2 ～ 4 | 1 ～ 5 | 6 ～ 25 | 3 ～ 6 | 1 ～ 12 | 6 ～ 12 | 2 ～ 12 | 0.8 ～ 3 | 10 ～ 20 | 0.5 ～ 2.5 | 6 ～ 20 | 6 ～ 12 | 16 ～ 20 | 3 ～ 25 | 2 ～ 13 | 6 ～ 20 | 3 ～ 20 | 6 ～ 12 | 6 | 6 ～ 25 | 10 | 4 ～ 16 | 0.5 ～ 3 | 0.5 ～ 3 |
| R Size(mm) | 0.05 ～ 0.5 | 0.3 ～ 1 | 0.2 ～ 3 | 0.2 ～ 2 | 0.1 ～ 3 | 0.5 ～ 3 | 0.5 ～ 2 | 0.1 ～ 0.5 | 0.5 ～ 1 | 0.1 | 1.5 ～ 3 | 0.2 | 0.5 ～ 3 | 0.2 ～ 5 | 0.5 ～ 3 | 0.1 ～ 0.4 | 0.2 ～ 3 | 0.5 ～ 1 | 0.3 | 0.3 ～ 5 | 0.5 | 1 ～ 3 | 0.05 ～ 0.5 | 0.05 ～ 0.5 |
| Work Material | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[○] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] | Heat-Treated Steel[◎] |
| Flute Length (ℓ)(mm) | 0.15 ～ 4 | 2 ～ 10 | 15 ～ 50 | 3 ～ 6 | 2.5 ～ 26 | 20 ～ 40 | 3 ～ 18 | 0.32 ～ 1.2 | 10 ～ 20 | 0.7 ～ 3.7 | 12 ～ 40 | 13 ～ 26 | 48 ～ 56 | 6 ～ 50 | 0.8 ～ 5.5 | 0.9 ～ 3.2 | 5 ～ 30 | 9 ～ 18 | 13 | 12 ～ 50 | 15 | 6 ～ 24 | 0.3 ～ 1.8 | 0.3 ～ 1.8 |
| Number of Flutes(sheet) | 2 ～ 4 | 3 | 6 ～ 8 | 2 | 2 | 2 | 3 | 4 | 2 | 2 | 3 | 4 | 4 | 4 | 3 ～ 4 | 4 | 4 | 4 | 4 | 6 | 4 | 3 | 2 | 2 |
| Model | Long Neck Radius | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Long Neck Radius | Long Neck Radius | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Long Neck Radius | Regular Type | Long Neck Radius |
| Overall Length (L)(mm) | 50 ～ 80 | 60 ～ 70 | 90 ～ 180 | 45 ～ 50 | 40 ～ 110 | 90 ～ 110 | 60 ～ 220 | 50 | 32 ～ 58 | 50 | 80 ～ 150 | 90 ～ 110 | 140 ～ 160 | 50 ～ 120 | 60 ～ 110 | 90 ～ 160 | 60 ～ 160 | 50 ～ 80 | 60 | 50 ～ 120 | 130 | 70 ～ 175 | 45 ～ 50 | 45 ～ 50 |
| Link Diameter (d)(mm) | 4 ～ 6 | 6 | 6 ～ 25 | 6 | 4 ～ 12 | 6 ～ 12 | 6 ～ 20 | 4 | 6 ～ 12 | 6 | 6 ～ 20 | 6 ～ 12 | 16 ～ 20 | 6 ～ 25 | 6 ～ 12 | 6 ～ 20 | 6 ～ 20 | 6 ～ 12 | 6 | 6 ～ 25 | 8 | 4 ～ 16 | 4 ～ 6 | 4 ～ 6 |
| Length Under Neck (ℓ1)(mm) | 0.5 ～ 35 | 4 ～ 15 | - | - | - | - | 10 ～ 160.8 | 2 ～ 16.65 | - | 1.5 ～ 5 | - | - | - | - | 5 ～ 24 | 9 ～ 30 | 9 ～ 60 | - | - | - | - | 20 ～ 120 | 1.5 ～ 6 | 2.5 ～ 12 |
| Processing Applications | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting |
| Coating | For High Hardness (Silicone-Based) | TiAlN | TiAlN | Non-Coated | TiAlN | TiAlN | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For General Steel (AlCrN etc.) | TiAlN | For High Hardness (Silicone-Based) | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | For High Hardness (Silicone-Based) | - | - |
| Helix Angle (Θ) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | No Helix/ None | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | No Helix/ None | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | No Helix/ None | No Helix/ None | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | - | Standard Helix (30 to 40°) |
| R Precision(µm) | - | - | - | - | - | - | - | 0～-0.01 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | ±0.005 |
Loading...
Configure
Specification/Dimensions
-
Metric / Inch
- metric
-
Flute Diameter (D)(φ)
-
R Size(mm)
-
Work Material
-
Flute Length (ℓ)(mm)
- 0.08
- 0.13
- 0.15
- 0.16
- 0.2
- 0.24
- 0.25
- 0.28
- 0.3
- 0.32
- 0.4
- 0.48
- 0.5
- 0.55
- 0.56
- 0.6
- 0.64
- 0.65
- 0.7
- 0.72
- 0.75
- 0.8
- 0.9
- 0.96
- 1
- 1.2
- 1.44
- 1.5
- 1.6
- 1.8
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.7
- 3
- 3
- 3.2
- 3.5
- 3.7
- 4
- 4
- 4.5
- 4.8
- 5
- 5
- 5.25
- 5.5
- 5.6
- 6
- 6
- 6.75
- 7
- 7.5
- 8
- 8.25
- 8.4
- 9
- 10
- 10
- 10.5
- 11
- 12
- 12
- 12.5
- 13
- 13.5
- 14
- 15
- 15
- 16
- 16.5
- 17
- 17.5
- 18
- 19
- 19.5
- 20
- 21
- 22
- 24
- 25
- 25.5
- 26
- 27
- 28
- 30
- 32
- 33
- 34
- 35
- 36
- 38
- 40
- 42
- 45
- 48
- 50
- 55
- 56
- 60
- 64
- 75
- 80
- 100
-
Number of Flutes(sheet)
-
Model
- Regular Type
- High-Feed Radius
- Long Neck Radius
- Tapered Neck Radius
-
Overall Length (L)(mm)
-
Link Diameter (d)(mm)
-
Length Under Neck (ℓ1)(mm)
-
Processing Applications
-
Coating
-
Helix Angle (Θ)
-
R Precision(µm)
Narrow search by specifying Manufacturer
-
- MISUMI (49)
- OSG (24)
- NS TOOL (13)
- UNION TOOL (10)
- Nachi-Fujikoshi (7)
- DIJET (5)
- KYOWASEIKO (5)
- 7 LEADERS (4)
- GUHRING (4)
- OKAZAKI (4)
- S&K (4)
- SANDVIK (2)
- VAN HOORN (2)
- ATOM (1)
- Poulten&Graf (1)
- TAIYO TOOL (0)
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy