While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

OSG Carbide Radius End Mill（Processing Applications：Side Surface）

Search by specifying the lower class category

27 items

: 30; 45; 60

Days to Ship	All Same day 5 Days or Less 8 Days or Less 9 Days or Less 10 Days or Less 11 Days or Less 12 Days or Less 15 Days or Less 16 Days or Less 17 Days or Less

New DLC Coating Carbide End Mill, 2-Flute Short Type for Aluminum Alloy DLC-AIR-EDS

OSG

End mill for aluminum alloy based on the concept of ultra-high speed machining. Ideal for high-efficiency processing of large aluminum parts for aircrafts, etc.

Volume Discount
Days to Ship: 8 Days or more
Carbide End Mill, Phoenix (High Feed Bull Nose) PHX-CRT

OSG

Corner radius type with a low-resistance blade shape in order to increase the amount of cutting per blade. Unprecedented high-feed processing is possible.

Volume Discount
Days to Ship: 8 Days or more
For Use with Vertical Walls, Multifunctional FXS-MFE

OSG

Capable of high-efficiency, high-precision machining of wide standing walls using step cutting

Volume Discount
Days to Ship: 8 Days or more
2-Flute, Corner R, Short Type GX-CR-EDS-SF

OSG

Carbide mushroom-shaped end mill with rounded corners developed for shrink-fit types.

Volume Discount
Days to Ship: 8 Days or more
2-Flute, Corner R Short Type CBN-CR-EDS

OSG

Excellent for machining high-hardness materials

Volume Discount
Days to Ship: 8 Days or more
2-Flute, Corner R Short Type FX-CR-EDS-6

OSG

End mill with rounded corners for high-speed machining that fully draws on the performance of high-speed/high-precision machining centers.

Volume Discount
Days to Ship: 8 Days or more
2-Flute, Corner R Short Type FX-CR-MG-EDS

OSG

Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.

Volume Discount
Days to Ship: 8 Days or more
3-Flute, Short, Corner R Type for Copper / Aluminum Alloy CA-CR-ETS

OSG

Even with aluminum part machining requiring large volumes of cutting, the unique groove form simultaneously achieves superior chip discharge performance, large cutting depth and a high feed rate.

Volume Discount
Days to Ship: 8 Days or more
Carbide End Mill, Phoenix (Deep Feeder Radius) PHX-DFR

OSG

Adopts an ultra-heat-resistant and ultra-hard WXS coating

Volume Discount
Days to Ship: 8 Days or more
3-Flute, Multifunctional, Strong Model for Aluminum Alloy CA-PKE

OSG

High-rigidity recessed short blade that can be used for everything from roughing to finishing using various cutter paths.

Volume Discount
Days to Ship: 8 Days or more
4-Flute, Unequal Lead, Corner R, Short, Strong Heavy-Cutting Model NEO-CR-PHS

OSG

Evolved "uneven lead" type effect suppresses chatter to realize astonishingly high efficiency machining.

Volume Discount
Days to Ship: 8 Days or more
2-Flute, Corner Radius, Long Shank, Short Type for Graphite DIA-LS-CRED

OSG

Thin vertical wall milling tool for graphite electrode. The step processing prevents chattering and chipping. A rounded blade is used for the shank side as well.

Volume Discount
Days to Ship: 8 Days or more
WX21 Carbide End Mill (Super Radius) WX-CRE

OSG

A new type of radius end mill that achieves high-efficiency rough machining of molds. Capable of direct high-performance engraving of hardened steel.

Volume Discount
Days to Ship: 8 Days or more
Cermet End Mill (for Bottom Finishing) FX-MCF

OSG

Cermet base material + FX coating end mill for bottom finish. Provides a mirror finish at astoundingly high speeds.

Volume Discount
Days to Ship: 8 Days or more
Heavy Duty Multi-Function DLC-PKE

OSG

Ultra-smooth DLC coating enables semi-dry processing as well as high speed processing of aluminum.

Volume Discount
Days to Ship: 8 Days or more
Heavy Duty Multi-Function FXS-PKE

OSG

In addition to conventional coating properties, this coating has extremely high oxidation resistance to achieve high-speed machining.

Volume Discount
Days to Ship: 8 Days or more
Carbide Ultra FX Super End Mill (Strong Type Multifunction HS Shank) FXS-HS-PKE

OSG

Ideal for high-efficiency machining of pocket engraving with the minimum required blade length and strong torsion. Overall tool length which fits shrink-fit and HSK types perfectly.

Volume Discount
Days to Ship: 8 Days or more
WX21 Carbide End Mill, 4-Blade Short Rounded Corner High-Strength Heavy Cutting Type WX-CR-PHS

OSG

Next generation high torsion radius end mill with great chip discharge performance and high blade rigidity. Supports a wide range of cutter passes including ramping and profile processing in addition to normal 2D machining.

Volume Discount
Days to Ship: 8 Days or more
Carbide Ultra FX Super End Mill (Corner Radius Short Type) FXS-CR-EMS

OSG

Radius end mill for high-speed processing with high rigidity. High speed machining of hardened steel is also possible.

Volume Discount
Days to Ship: 8 Days or more
6-Flute, Unequal Lead, Corner R, Short NEO-CR-EMS

OSG

Evolved "uneven lead" type effect suppresses chatter to realize astonishingly high efficiency machining.

Volume Discount
Days to Ship: 8 Days or more
2-Flute/4-Flute Pencil-Neck / Long Neck Corner Radius Type DG-CPR

OSG

A dedicated graphite coating with excellent abrasion resistance.

Volume Discount
Days to Ship: 8 Days or more
Carbide End Mill WX Super Coat (High Precision Bull Nose) WXS-CPR

OSG

High-precision bull nose (radius) end mill for shape processing of molds. High-speed cutting of hardened steel is also possible thanks to the WXS coating with excellent heat resistance.

Volume Discount
Days to Ship: 8 Days or more
Phoenix Pencil Neck Deep Feeder Radius PHX-PC-DFR

OSG

Adopts an ultra-heat-resistant and ultra-hard WXS coating

Volume Discount
Days to Ship: 8 Days or more
Long-Neck Deep Feeder Radius PHX-LN-DFR

OSG

Adopts an ultra-heat-resistant and ultra-hard WXS coating

Volume Discount
Days to Ship: 8 Days or more
CBN End Mill (Small Diam., 2-Flute, Corner Radius End Mill) CBN-SXR

OSG

The rounded 3D shape makes it resistant to chipping.

Volume Discount
Days to Ship: 8 Days or more
Carbide End Mill, Phoenix, Long Neck, Tough Radius PHX-LN-CRE

OSG

Adopts an ultra-heat-resistant and ultra-hard WXS coating

Volume Discount
Days to Ship: 8 Days or more
CBN End Mill (Small Diam., 2-Flute, Long-Neck Radius Type) CBN-LN-SXR

OSG

Blade uses a sintered CBN material.

Volume Discount
Days to Ship: 8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more

Days to Ship:	8 Days or more


Brand
Product Series
Days to Ship
Flute Diameter (D)(φ)
R Size(mm)
Work Material
Flute Length (ℓ)(mm)
Number of Flutes(sheet)
Model
Overall Length (L)(mm)
Link Diameter (d)(mm)
Length Under Neck (ℓ1)(mm)
Processing Applications
Coating
Helix Angle (Θ)
R Precision(µm)


Brand	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG	OSG
Product Series	New DLC Coating Carbide End Mill, 2-Flute Short Type for Aluminum Alloy DLC-AIR-EDS	Carbide End Mill, Phoenix (High Feed Bull Nose) PHX-CRT	For Use with Vertical Walls, Multifunctional FXS-MFE	2-Flute, Corner R, Short Type GX-CR-EDS-SF	2-Flute, Corner R Short Type CBN-CR-EDS	2-Flute, Corner R Short Type FX-CR-EDS-6	2-Flute, Corner R Short Type FX-CR-MG-EDS	3-Flute, Short, Corner R Type for Copper / Aluminum Alloy CA-CR-ETS	Carbide End Mill, Phoenix (Deep Feeder Radius) PHX-DFR	3-Flute, Multifunctional, Strong Model for Aluminum Alloy CA-PKE	4-Flute, Unequal Lead, Corner R, Short, Strong Heavy-Cutting Model NEO-CR-PHS	2-Flute, Corner Radius, Long Shank, Short Type for Graphite DIA-LS-CRED	WX21 Carbide End Mill (Super Radius) WX-CRE	Cermet End Mill (for Bottom Finishing) FX-MCF	Heavy Duty Multi-Function DLC-PKE	Heavy Duty Multi-Function FXS-PKE	Carbide Ultra FX Super End Mill (Strong Type Multifunction HS Shank) FXS-HS-PKE	WX21 Carbide End Mill, 4-Blade Short Rounded Corner High-Strength Heavy Cutting Type WX-CR-PHS	Carbide Ultra FX Super End Mill (Corner Radius Short Type) FXS-CR-EMS	6-Flute, Unequal Lead, Corner R, Short NEO-CR-EMS	2-Flute/4-Flute Pencil-Neck / Long Neck Corner Radius Type DG-CPR	Carbide End Mill WX Super Coat (High Precision Bull Nose) WXS-CPR	Phoenix Pencil Neck Deep Feeder Radius PHX-PC-DFR	Long-Neck Deep Feeder Radius PHX-LN-DFR	CBN End Mill (Small Diam., 2-Flute, Corner Radius End Mill) CBN-SXR	Carbide End Mill, Phoenix, Long Neck, Tough Radius PHX-LN-CRE	CBN End Mill (Small Diam., 2-Flute, Long-Neck Radius Type) CBN-LN-SXR
Days to Ship	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more	8 Days or more
Flute Diameter (D)(φ)	12 ～ 25	1 ～ 5	10	12 ～ 16	3 ～ 6	0.5 ～ 2.5	2 ～ 4	6 ～ 12	6 ～ 20	12	3 ～ 10	5 ～ 11	5 ～ 13	6 ～ 8	3 ～ 20	3 ～ 20	6	6	6 ～ 25	8 ～ 10	0.5 ～ 12	0.4 ～ 4	2 ～ 12	4 ～ 16	0.5 ～ 3	0.8 ～ 3	0.5 ～ 3
R Size(mm)	1 ～ 3	0.3 ～ 1	0.5	0.5	0.2 ～ 2	0.1	0.1 ～ 1	0.3 ～ 2	1.5 ～ 3	1	0.2 ～ 2	0.3 ～ 1	1.2 ～ 3	0.1	0.5 ～ 3	0.2 ～ 3	0.5	0.3	0.2 ～ 3	0.3 ～ 2	0.1 ～ 1	0.05 ～ 0.5	0.5 ～ 2	1 ～ 3	0.05 ～ 0.5	0.1 ～ 0.5	0.05 ～ 0.5
Work Material	Aluminum[◎]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○]	General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○]	General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Cast Iron[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○]	Aluminum[◎] / Copper[◎] / Resin[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[○]	Aluminum[◎] / Copper[◎] / Resin[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]	Graphite[◎]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[○] / Cast Iron[◎]	General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○]	Aluminum[◎] / Copper[○] / Resin[◎]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎]	Graphite[◎]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[◎]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[○]	General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[○]	General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎]	General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○]	General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎]
Flute Length (ℓ)(mm)	14 ～ 27	2 ～ 10	15	12 ～ 16	3 ～ 6	0.7 ～ 3.7	6 ～ 11	13 ～ 26	12 ～ 40	18	6 ～ 20	10 ～ 22	2 ～ 5.5	0.9 ～ 1.2	4.5 ～ 30	5 ～ 30	9	13	15 ～ 50	16 ～ 20	0.9 ～ 12	0.3 ～ 4	3 ～ 18	6 ～ 24	0.3 ～ 1.8	0.32 ～ 1.2	0.3 ～ 1.8
Number of Flutes(sheet)	2	3	4	2	2	2	2	3	3	3	4	2	4	4	3	4	4	4	6 ～ 8	6	2 ～ 4	2 ～ 4	3	3	2	4	2
Model	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Regular Type	Long Neck Radius	Long Neck Radius	Long Neck Radius	Long Neck Radius	Regular Type	Long Neck Radius	Long Neck Radius
Overall Length (L)(mm)	90 ～ 110	60 ～ 70	130	34 ～ 49	45 ～ 50	50	40 ～ 70	50 ～ 75	80 ～ 150	90	50 ～ 70	100 ～ 180	80 ～ 110	90 ～ 100	50 ～ 125	60 ～ 160	50	60	90 ～ 180	60 ～ 70	50 ～ 150	50 ～ 70	60 ～ 220	70 ～ 175	45 ～ 50	50	45 ～ 50
Link Diameter (d)(mm)	12 ～ 25	6	8	6 ～ 10	6	6	4 ～ 6	6 ～ 12	6 ～ 20	12	6 ～ 10	4 ～ 10	6 ～ 12	6 ～ 8	6 ～ 20	6 ～ 20	6	6	6 ～ 25	8 ～ 10	4 ～ 12	4 ～ 6	6 ～ 20	4 ～ 16	4 ～ 6	4	4 ～ 6
Length Under Neck (ℓ1)(mm)	40 ～ 56	4 ～ 15	-	-	-	1.5 ～ 5	-	-	-	-	-	-	12.5	9 ～ 12	-	9 ～ 60	-	-	-	-	4 ～ 60	1 ～ 20	10 ～ 160.8	20 ～ 120	1.5 ～ 6	2 ～ 16.65	2.5 ～ 12
Processing Applications	Side Surface	Side Surface	Side Surface	Side Surface	Side Surface	Side Surface	Side Surface	Side Surface	Side Surface	Side Surface	Side Surface	Side Surface	Side Surface	Side Surface	Side Surface	Side Surface	Side Surface	Side Surface	Side Surface	Side Surface	Side Surface	Side Surface	Side Surface	Side Surface	Side Surface	Side Surface	Side Surface
Coating	DLC	TiAlN	TiAlN	For General Steel (AlCrN etc.)	Non-Coated	TiAlN	TiAlN	Non-Coated	For High Hardness (Silicone-Based)	Non-Coated	TiAlN	Diamond Coat	TiAlN	TiAlN	DLC	TiAlN	TiAlN	TiAlN	TiAlN	TiAlN	Non-Coated	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	For High Hardness (Silicone-Based)	-	For High Hardness (Silicone-Based)	-
Helix Angle (Θ)	Weak Helix (15 to 25°)	Powerful Helix (45° to 60°)	Powerful Helix (45° to 60°)	No Helix/ None	No Helix/ None	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Powerful Helix (45° to 60°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	No Helix/ None	No Helix/ None	Standard Helix (30 to 40°)	Powerful Helix (45° to 60°)	Powerful Helix (45° to 60°)	Powerful Helix (45° to 60°)	Powerful Helix (45° to 60°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)	Powerful Helix (45° to 60°)	Powerful Helix (45° to 60°)	-	Standard Helix (30 to 40°)	Standard Helix (30 to 40°)
R Precision(µm)	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	-	0～-0.01	±0.005

Configure

Specification/Dimensions

Metric / Inch
- metric
Clear

Flute Diameter (D)(φ)
0.1

0.2

0.3

0.4

0.5

0.6

0.7

0.8

0.9

1

1.2

1.4

1.5

1.6

1.8

2

2　

2.5

2.8

3

3　

3.5

4

4　

4.5

5

5　

5.5

6

7

8

8　

9

10

10　

11

12

12　

13

14

16

17

18

20

22

25
Drawing

Clear

R Size(mm)
R0

0.02

0.03

0.05

0.1

0.15

0.2

0.25

0.3

0.4

0.5

0.6

0.7

0.75

0.8

0.813

0.9

1

R1

1.1

1.2

1.219

1.3

1.4

1.5

R1.5

1.6

1.625

1.7

1.8

1.9

2

R2

2.031

2.1

2.2

2.3

2.4

2.438

2.465

2.5

R2.5

2.6

2.607

2.7

2.8

2.9

3

R3

3.2

3.5

4

R4

5

R5

R6

6.5
Drawing

Clear

Work Material
- General Steel
- Heat-Treated Steel
- High-Hardness Steel ~ HRC55
- High-Hardness Steel ~ HRC60
- High-Hardness Steel – HRC65
- Stainless Steel
- Cast Iron
- Aluminum
- Titanium
- Copper
- Graphite
- Resin
Details

Clear

Flute Length (ℓ)(mm)
0.08

0.13

0.15

0.16

0.2

0.24

0.25

0.28

0.3

0.32

0.4

0.48

0.5

0.55

0.56

0.6

0.64

0.65

0.7

0.72

0.75

0.8

0.9

0.96

1

1.2

1.44

1.5

1.6

1.8

2

2.1

2.2

2.25

2.3

2.4

2.5

2.7

3

3　

3.2

3.5

3.7

4

4　

4.5

4.8

5

5　

5.25

5.5

5.6

6

6　

6.75

7

7.5

8

8.25

8.4

9

10

10　

10.5

11

12

12　

12.5

13

13.5

14

15

15　

16

16.5

17

17.5

18

19

20

21

22

24

25

26

27

28

30

32

33

34

35

36

38

40

42

45

48

50

55

56

60

64

80

100
Drawing

Clear

Number of Flutes(sheet)
2

3

4

5

6

8
Drawing

Clear

Model
- Regular Type
- High-Feed Radius
- Long Neck Radius
- Tapered Neck Radius
Clear

Overall Length (L)(mm)
34

35

38

40

45

48

49

50

51

52

53

55

57

60

62

63

64

65

68

70

72

74

75

80

83

85

86

90

92

95

100

104

105

110

115

120

121

125

130

135

140

145

150

160

170

175

180

185

190

200

220
Drawing

Clear

Link Diameter (d)(mm)
3

4

5.8

6

7.8

8

9.8

10

11

12

13

14

15

16

17

18

20

25
Drawing

Clear

Length Under Neck (ℓ1)(mm)
0.2

0.5

1

1.5

1.6

1.8

2

2.4

2.5

3

3.5

3.8

4

4.5

5

6

7

7.5

8

9

10

11

12

12.35

12.5

13

14

14.35

15

16

16.65

18

20

21

22

24

25

26

27

28

30

32

32.1

32.6

33.6

34.6

35

35.6

36

38

39

40

41.2

42

42.2

43.2

44

44.2

45

45.2

46.5

48

50

54

55

56

60

60.3

60.8

61.3

62.3

63.3

64

64.3

65

70

72

75

80

80.4

81.4

82.4

84

85

90

92.9

95

100

102

105

108

110

120

120.6

121.6

122.6

125

140

160

160.8
Drawing

Clear

Processing Applications
- Flat Surface
- Side Surface
- Curved Surface
- Groove
- Thrust (Z-Feed)
- Inclined Cutting
Images

Clear

Coating
- For High Hardness (Silicone-Based)
- TiAlN
- For General Steel (AlCrN etc.)
- TiCN
- DLC
- Diamond Coat
- Non-Coated
- AlTiN
- Other
Details

Clear

Helix Angle (Θ)
- No Helix/ None
- Weak Helix (15 to 25°)
- Standard Helix (30 to 40°)
- Powerful Helix (45° to 60°)
- Others
Clear

R Precision(µm)
-0.014～-0.028

0～-20

0～-0.05

0～-0.030

0～-0.015

0～-0.01

±0.005

0.005～-0.005

±0.01

0.01～-0.01

±0.015

0.015～-0.015

±0.02

0.02～-0.02

0.025～-0.025

±0.03

±0.05
Drawing

Clear

Narrow search by specifying Manufacturer

- MISUMI (56)
- C-Value ()
- OSG (27)
- NS TOOL (13)
- KYOWASEIKO (12)
- UNION TOOL (12)
- DIJET (7)
- 7 LEADERS (4)
- Nachi-Fujikoshi (2)
- OKAZAKI (2)
- ATOM (1)
- Poulten&Graf (1)
- SANDVIK (1)
- VAN HOORN (0)
- TAIYO TOOL (0)
- GUHRING (0)
Clear

CAD

- 2D
- 3D
Clear

Related Categories to Carbide Radius End Mill

- Long Neck Radius End Mills (Carbide)
- Radius End Mills (Carbide)

Top of the page

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)

Contact Information: Contact Us

Inquiry Format

All Categories

Categories

Applications

Brands

How can we improve?

OSG Carbide Radius End Mill（Processing Applications：Side Surface）

Search by specifying the lower class category

Configure

Specification/Dimensions

Metric / Inch

Flute Diameter (D)(φ)

R Size(mm)

Work Material

Flute Length (ℓ)(mm)

Number of Flutes(sheet)

Model

Overall Length (L)(mm)

Link Diameter (d)(mm)

Length Under Neck (ℓ1)(mm)

Processing Applications

Coating

Helix Angle (Θ)

R Precision(µm)

Narrow search by specifying Manufacturer

CAD

Related Categories to Carbide Radius End Mill

About This Website

About MISUMI Corporation

Contact us Monday to Friday: 8:00 am to 6:00 pm (Mexico City time)