(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
4-Flute, Corner R, Long Type FX-CR-MG-EML
OSG
Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.
Days to Ship: | 8 Days or more |
---|
Carbide Ultra FX Super End Mill (Corner Radius Short Type) FXS-CR-EMS
OSG
Radius end mill for high-speed processing with high rigidity. High speed machining of hardened steel is also possible.
Days to Ship: | 8 Days or more |
---|
2-Flute, Corner R Long Type FX-CR-MG-EDL
OSG
Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.
Days to Ship: | 8 Days or more |
---|
3-Flute, Short, Corner R Type for Copper / Aluminum Alloy CA-CR-ETS
OSG
Even with aluminum part machining requiring large volumes of cutting, the unique groove form simultaneously achieves superior chip discharge performance, large cutting depth and a high feed rate.
Days to Ship: | 8 Days or more |
---|
2-Flute, Corner R, Short Type GX-CR-EDS-SF
OSG
Carbide mushroom-shaped end mill with rounded corners developed for shrink-fit types.
Days to Ship: | 8 Days or more |
---|
2-Flute, Corner R Short Type CBN-CR-EDS
OSG
Excellent for machining high-hardness materials
Days to Ship: | 8 Days or more |
---|
2-Flute, Corner R Short Type FX-CR-EDS-6
OSG
End mill with rounded corners for high-speed machining that fully draws on the performance of high-speed/high-precision machining centers.
Days to Ship: | 8 Days or more |
---|
2-Flute, Corner R Short Type FX-CR-MG-EDS
OSG
Long shank type to enable machining deep parts. Can be also used as a corner chipping countermeasure.
Days to Ship: | 8 Days or more |
---|
New DLC Coating Carbide End Mill, 2-Flute Short Type for Aluminum Alloy DLC-AIR-EDS
OSG
End mill for aluminum alloy based on the concept of ultra-high speed machining. Ideal for high-efficiency processing of large aluminum parts for aircrafts, etc.
Days to Ship: | 8 Days or more |
---|
3-Flute, for Aluminum Alloy CA-MFE-SF
OSG
Streak generation is suppressed by rounding the shank end face
Days to Ship: | 8 Days or more |
---|
Carbide End Mill, Phoenix (High Feed Bull Nose) PHX-CRT
OSG
Corner radius type with a low-resistance blade shape in order to increase the amount of cutting per blade. Unprecedented high-feed processing is possible.
Days to Ship: | 8 Days or more |
---|
Carbide End Mill, Phoenix (Deep Feeder Radius) PHX-DFR
OSG
Adopts an ultra-heat-resistant and ultra-hard WXS coating
Days to Ship: | 8 Days or more |
---|
3-Flute, Multifunctional, Strong Model for Aluminum Alloy CA-PKE
OSG
High-rigidity recessed short blade that can be used for everything from roughing to finishing using various cutter paths.
Days to Ship: | 8 Days or more |
---|
Carbide Ultra FX End Mill (Positive Corner Radius Type Multifunction) FX-CR-MG-EHS
OSG
The highly sharp, positive cutting blade prevents the occurrence of work-hardening. Supports various cutter paths due to the rounded corners.
Days to Ship: | 8 Days or more |
---|
4-Flute, Unequal Lead, Corner R, Short, Strong Heavy-Cutting Model NEO-CR-PHS
OSG
Evolved "uneven lead" type effect suppresses chatter to realize astonishingly high efficiency machining.
Days to Ship: | 8 Days or more |
---|
2-Flute, Corner Radius, Long Shank, Short Type for Graphite DIA-LS-CRED
OSG
Thin vertical wall milling tool for graphite electrode. The step processing prevents chattering and chipping. A rounded blade is used for the shank side as well.
Days to Ship: | 8 Days or more |
---|
WX21 Carbide End Mill (Super Radius) WX-CRE
OSG
A new type of radius end mill that achieves high-efficiency rough machining of molds. Capable of direct high-performance engraving of hardened steel.
Days to Ship: | 8 Days or more |
---|
Cermet End Mill (for Bottom Finishing) FX-MCF
OSG
Cermet base material + FX coating end mill for bottom finish. Provides a mirror finish at astoundingly high speeds.
Days to Ship: | 8 Days or more |
---|
Heavy Duty Multi-Function DLC-PKE
OSG
Ultra-smooth DLC coating enables semi-dry processing as well as high speed processing of aluminum.
Days to Ship: | 8 Days or more |
---|
Heavy Duty Multi-Function FXS-PKE
OSG
In addition to conventional coating properties, this coating has extremely high oxidation resistance to achieve high-speed machining.
Days to Ship: | 8 Days or more |
---|
Carbide Ultra FX Super End Mill (Strong Type Multifunction HS Shank) FXS-HS-PKE
OSG
Ideal for high-efficiency machining of pocket engraving with the minimum required blade length and strong torsion. Overall tool length which fits shrink-fit and HSK types perfectly.
Days to Ship: | 8 Days or more |
---|
WX21 Carbide End Mill, 4-Blade Short Rounded Corner High-Strength Heavy Cutting Type WX-CR-PHS
OSG
Next generation high torsion radius end mill with great chip discharge performance and high blade rigidity. Supports a wide range of cutter passes including ramping and profile processing in addition to normal 2D machining.
Days to Ship: | 8 Days or more |
---|
6-Flute, Unequal Lead, Corner R, Short NEO-CR-EMS
OSG
Evolved "uneven lead" type effect suppresses chatter to realize astonishingly high efficiency machining.
Days to Ship: | 8 Days or more |
---|
For Use with Vertical Walls, Multifunctional FXS-MFE
OSG
Capable of high-efficiency, high-precision machining of wide standing walls using step cutting
Days to Ship: | 8 Days or more |
---|
2-Flute/4-Flute Pencil-Neck / Long Neck Corner Radius Type DG-CPR
OSG
A dedicated graphite coating with excellent abrasion resistance.
Days to Ship: | 8 Days or more |
---|
Carbide End Mill WX Super Coat (High Precision Bull Nose) WXS-CPR
OSG
High-precision bull nose (radius) end mill for shape processing of molds. High-speed cutting of hardened steel is also possible thanks to the WXS coating with excellent heat resistance.
Days to Ship: | 8 Days or more |
---|
Phoenix Pencil Neck Deep Feeder Radius PHX-PC-DFR
OSG
Adopts an ultra-heat-resistant and ultra-hard WXS coating
Days to Ship: | 8 Days or more |
---|
Long-Neck Deep Feeder Radius PHX-LN-DFR
OSG
Adopts an ultra-heat-resistant and ultra-hard WXS coating
Days to Ship: | 8 Days or more |
---|
CBN End Mill (Small Diam., 2-Flute, Corner Radius End Mill) CBN-SXR
OSG
The rounded 3D shape makes it resistant to chipping.
Days to Ship: | 8 Days or more |
---|
Carbide End Mill, Phoenix, Long Neck, Tough Radius PHX-LN-CRE
OSG
Adopts an ultra-heat-resistant and ultra-hard WXS coating
Days to Ship: | 8 Days or more |
---|
CBN End Mill (Small Diam., 2-Flute, Long-Neck Radius Type) CBN-LN-SXR
OSG
Blade uses a sintered CBN material.
Days to Ship: | 8 Days or more |
---|
Uneven Lead End Mill (4 Flutes) for Machining FX Coated Titanium Alloy
OSG
[Features]
· Supports complex pocket machining involving groove and side cutting, as well as machining prone to chattering. Safety and high efficacy are achieved with high-difficulty titanium alloy processing.
[Applications]
· Work materials: Titanium alloy.
[Specifications]
· Torsion angle: 40.5°/43.5°
[Material]
· Cemented Carbide
Days to Ship: | 8 Days or more |
---|
Titanium Alloy Processed for High Feed Radius End Mills (Multiple Flutes)
OSG
[Features]
· It is an end mill for high-efficiency bottom finishing processing. Significantly reduces machining time and achieves high finishing precision.
[Applications]
· Work materials: Titanium alloy.
[Material]
· Cemented Carbide
· Non-coating
Days to Ship: | 8 Days or more |
---|
Uneven Lead End Mill (5 Flutes) for Machining FX Coated Titanium Alloy
OSG
[Features]
· Supports complex pocket machining involving groove and side cutting, as well as machining prone to chattering. Safety and high efficacy are achieved with high-difficulty titanium alloy processing.
[Applications]
· Work materials: Titanium alloy.
[Specifications]
· Torsion angle 41°/42°/43°
[Material]
· Cemented Carbide
Days to Ship: | 8 Days or more |
---|
Uneven Lead End Mill (5 Flutes, Long Type) for Machining FX Coated Titanium Alloy
OSG
[Features]
· Supports complex pocket machining involving groove and side cutting, as well as machining prone to chattering. Safety and high efficacy are achieved with high-difficulty titanium alloy processing.
[Applications]
· Work materials: Titanium alloy.
[Specifications]
· Torsion angle: 41°/42°/43°
[Material]
· Cemented Carbide
Days to Ship: | 8 Days or more |
---|
General Purpose Router, with Bottom Blade Corner Rounded (4 Bottom Blades) DIA-MRC
OSG
It is a product sold by designated agencies.
[Features]
· Can be used for a wide variety of machining such as for various composite materials that include electrolyte membranes, metal matrices, and ceramic bases as well as machinable ceramics.
· Base blade has rounded corners.
· Various rounding sizes are available. Select according to the application.
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Flute Diameter (D)(φ) |
R Size(mm) |
Work Material |
Flute Length (ℓ)(mm) |
Number of Flutes(sheet) |
Model |
Overall Length (L)(mm) |
Link Diameter (d)(mm) |
Length Under Neck (ℓ1)(mm) |
Processing Applications |
Coating |
Helix Angle (Θ) |
R Precision(µm) |
Brand | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Carbide Ultra FX Super End Mill (Corner Radius Short Type) FXS-CR-EMS | 3-Flute, Short, Corner R Type for Copper / Aluminum Alloy CA-CR-ETS | New DLC Coating Carbide End Mill, 2-Flute Short Type for Aluminum Alloy DLC-AIR-EDS | 3-Flute, Multifunctional, Strong Model for Aluminum Alloy CA-PKE | Carbide Ultra FX End Mill (Positive Corner Radius Type Multifunction) FX-CR-MG-EHS | 4-Flute, Unequal Lead, Corner R, Short, Strong Heavy-Cutting Model NEO-CR-PHS | 2-Flute, Corner Radius, Long Shank, Short Type for Graphite DIA-LS-CRED | Carbide Ultra FX Super End Mill (Strong Type Multifunction HS Shank) FXS-HS-PKE | WX21 Carbide End Mill, 4-Blade Short Rounded Corner High-Strength Heavy Cutting Type WX-CR-PHS | 2-Flute/4-Flute Pencil-Neck / Long Neck Corner Radius Type DG-CPR | Carbide End Mill WX Super Coat (High Precision Bull Nose) WXS-CPR | CBN End Mill (Small Diam., 2-Flute, Corner Radius End Mill) CBN-SXR | Carbide End Mill, Phoenix, Long Neck, Tough Radius PHX-LN-CRE | CBN End Mill (Small Diam., 2-Flute, Long-Neck Radius Type) CBN-LN-SXR | Uneven Lead End Mill (4 Flutes) for Machining FX Coated Titanium Alloy | Titanium Alloy Processed for High Feed Radius End Mills (Multiple Flutes) | Uneven Lead End Mill (5 Flutes) for Machining FX Coated Titanium Alloy | Uneven Lead End Mill (5 Flutes, Long Type) for Machining FX Coated Titanium Alloy | General Purpose Router, with Bottom Blade Corner Rounded (4 Bottom Blades) DIA-MRC | |||||||||||||||||
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Flute Diameter (D)(φ) | 16 ~ 20 | 6 ~ 25 | 6 ~ 12 | 3 ~ 20 | 10 ~ 20 | 3 ~ 6 | 0.5 ~ 2.5 | 1 ~ 12 | 12 ~ 25 | 18 ~ 22 | 1 ~ 5 | 6 ~ 20 | 3 ~ 20 | 6 ~ 12 | 3 ~ 25 | 5 ~ 11 | 2 ~ 13 | 6 ~ 20 | 3 ~ 20 | 3 ~ 20 | 6 ~ 12 | 6 | 6 ~ 25 | 10 | 0.5 ~ 12 | 0.2 ~ 4 | 2 ~ 12 | 4 ~ 16 | 0.5 ~ 3 | 0.8 ~ 3 | 0.5 ~ 3 | 12 ~ 25 | 16 ~ 25 | 12 ~ 25 | 12 ~ 25 | 4 ~ 12 |
R Size(mm) | 0.5 ~ 3 | 0.2 ~ 3 | 0.5 ~ 3 | 0.2 ~ 3 | 0.5 ~ 1 | 0.2 ~ 2 | 0.1 | 0.1 ~ 3 | 1 ~ 3 | 1 | 0.3 ~ 1 | 1.5 ~ 3 | 0.5 ~ 3 | 0.2 | 0.2 ~ 5 | 0.3 ~ 1 | 0.5 ~ 3 | 0.1 ~ 0.4 | 0.5 ~ 3 | 0.2 ~ 3 | 0.5 ~ 1 | 0.3 | 0.3 ~ 5 | 0.5 | 0.1 ~ 1 | 0.05 ~ 0.5 | 0.5 ~ 2 | 1 ~ 3 | 0.05 ~ 0.5 | 0.1 ~ 0.5 | 0.05 ~ 0.5 | R0 ~ R6 | - | R0 ~ R6 | R0 ~ R6 | - |
Work Material | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Cast Iron[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Aluminum[◎] | Aluminum[◎] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[○] | Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎] | Graphite[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[○] / Cast Iron[◎] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] | Aluminum[◎] / Copper[○] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[◎] / Cast Iron[◎] / Titanium[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[◎] / Titanium[○] | Graphite[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] | - | - | - | - | - |
Flute Length (ℓ)(mm) | 48 ~ 56 | 15 ~ 50 | 20 ~ 40 | 8 ~ 38 | 10 ~ 20 | 3 ~ 6 | 0.7 ~ 3.7 | 2.5 ~ 26 | 14 ~ 27 | 18 ~ 22 | 2 ~ 10 | 12 ~ 40 | 4.5 ~ 30 | 13 ~ 26 | 6 ~ 50 | 10 ~ 22 | 0.8 ~ 5.5 | 0.9 ~ 3.2 | 4.5 ~ 30 | 5 ~ 30 | 9 ~ 18 | 13 | 12 ~ 50 | 15 | 0.9 ~ 12 | 0.15 ~ 4 | 3 ~ 18 | 6 ~ 24 | 0.3 ~ 1.8 | 0.32 ~ 1.2 | 0.3 ~ 1.8 | 24 ~ 50 | 5 | 24 ~ 50 | 48 ~ 100 | 12 ~ 36 |
Number of Flutes(sheet) | 4 | 6 ~ 8 | 2 | 3 | 2 | 2 | 2 | 2 | 2 | 3 | 3 | 3 | 3 | 4 | 4 | 2 | 3 ~ 4 | 4 | 3 | 4 | 4 | 4 | 6 | 4 | 2 ~ 4 | 2 ~ 4 | 3 | 3 | 2 | 4 | 2 | 4 | 6 ~ 8 | 5 | 5 | 4 |
Model | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Regular Type | Long Neck Radius | Long Neck Radius | Long Neck Radius | Long Neck Radius | Regular Type | Long Neck Radius | Long Neck Radius | Regular Type | Regular Type | Regular Type | Long Neck Radius | Regular Type |
Overall Length (L)(mm) | 140 ~ 160 | 90 ~ 180 | 90 ~ 110 | 50 ~ 105 | 32 ~ 58 | 45 ~ 50 | 50 | 40 ~ 110 | 90 ~ 110 | 51 ~ 60 | 60 ~ 70 | 80 ~ 150 | 50 ~ 125 | 90 ~ 110 | 50 ~ 120 | 100 ~ 180 | 60 ~ 110 | 90 ~ 160 | 50 ~ 125 | 60 ~ 160 | 50 ~ 80 | 60 | 50 ~ 120 | 130 | 50 ~ 150 | 50 ~ 80 | 60 ~ 220 | 70 ~ 175 | 45 ~ 50 | 50 | 45 ~ 50 | 90 ~ 140 | 120 | 90 ~ 140 | 110 ~ 190 | 62 ~ 86 |
Link Diameter (d)(mm) | 16 ~ 20 | 6 ~ 25 | 6 ~ 12 | 6 ~ 20 | 6 ~ 12 | 6 | 6 | 4 ~ 12 | 12 ~ 25 | 10 ~ 12 | 6 | 6 ~ 20 | 6 ~ 20 | 6 ~ 12 | 6 ~ 25 | 4 ~ 10 | 6 ~ 12 | 6 ~ 20 | 6 ~ 20 | 6 ~ 20 | 6 ~ 12 | 6 | 6 ~ 25 | 8 | 4 ~ 12 | 4 ~ 6 | 6 ~ 20 | 4 ~ 16 | 4 ~ 6 | 4 | 4 ~ 6 | 12 ~ 25 | 16 ~ 25 | 12 ~ 25 | 12 ~ 25 | 4 ~ 12 |
Length Under Neck (ℓ1)(mm) | - | - | - | - | - | - | 1.5 ~ 5 | - | 40 ~ 56 | - | 4 ~ 15 | - | - | - | - | - | 5 ~ 24 | 9 ~ 30 | - | 9 ~ 60 | - | - | - | - | 4 ~ 60 | 0.5 ~ 35 | 10 ~ 160.8 | 20 ~ 120 | 1.5 ~ 6 | 2 ~ 16.65 | 2.5 ~ 12 | 36 ~ 75 | - | 36 ~ 75 | 60 ~ 125 | - |
Processing Applications | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Curved Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | - | - | - | - | - |
Coating | TiAlN | TiAlN | TiAlN | Non-Coated | For General Steel (AlCrN etc.) | Non-Coated | TiAlN | TiAlN | DLC | Non-Coated | TiAlN | For High Hardness (Silicone-Based) | Non-Coated | TiAlN | TiAlN | Diamond Coat | TiAlN | TiAlN | DLC | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | Non-Coated | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | - | For High Hardness (Silicone-Based) | - | - | - | - | - | - |
Helix Angle (Θ) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | No Helix/ None | No Helix/ None | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Weak Helix (15 to 25°) | No Helix/ None | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | No Helix/ None | No Helix/ None | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | - | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | - | - | - | - | - |
R Precision(µm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0~-0.01 | ±0.005 | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy