Brennan Industries Compression Fittings

• 

  Connector - Straight, Compression Fittings, N2404 Series

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

• 

  Ferrule Set - Compression Fittings, N0319-S

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

• 

  Tees - Union, Compression Fittings, N2603 Series

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

• 

  90° Elbows - Compression Fittings, N2500 Series

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

• 

  Adapter - Connector, Compression Fittings, N2430 Series

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

• 

  Connector - Straight, Compression Fittings, N2405 Series

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

• 

  Union - Compression Fittings, N2403 Series

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

• 

  Connector - Straight, Compression Fittings, N2402 Series

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

• 

  Plug - Compression Fittings, N0304 Series

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

• 

  Connector - Straight, Form B Straight, N7013 Series

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

• 

  Connector - Straight, Compression Fittings, Male BSPP Thread, N7002 Series

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

• 

  90° Elbows - Compression Fittings, Male SAE Thread, N6801 Series

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

• 

  Reducer - Bulkhead, Compression Fittings, N2709-LN Series

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

• 

  Connector - Bulkhead, Compression Fittings, Male JIC, N2707-LN Series

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

• 

  Connector - Bulkhead, Compression Fittings, Male NPT, N2706-LN Series

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

• 

  Union - Bulkhead, Compression Fittings, N2700-LN Series

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

• 

  Tees - Run, Compression Fittings, N2606 Series

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

• 

  Tees - Run, Compression Fittings, N2605 Series

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

• 

  Tees - Branch, Compression Fittings, N2602 Series

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

• 

  Tees - Branch, Compression Fittings, N2601 Series

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

• 

  90° Elbows - Compression Fittings, Female NPT, N2502 Series

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

• 

  90° Elbows - Compression Fittings, Male NPT, N2501 Series

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

• 

  Adapter - Connector, Compression Fittings, N2428 Series

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

• 

  Adapter - Connector, Compression Fittings, N2427 Series

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

• 

  Socket - Connector, Compression Fittings, Weld-On, N2426 Series

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

• 

  Cap - Compression Fittings, N2408 Series

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

• 

  Reducer - Compression Fittings, N2406 Series

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

• 

  Front Ferrule - Compression Fittings, N0319-F Series

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

• 

  Back Ferrule - Compression Fittings, N0319-B Series

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

• 

  Nut - Compression Fittings, N0318 Series

  Brennan Industries

  Brennan's Instrumentation Tube Fittings provide leak-proof, torque-free seals at all tubing connections. Brennan's Double-Ferrule and Single-Ferrule Tube Fittings are reusable several times and can withstand heavy impulse and vibration in both vacuum and pressure systems Exhaustive tests have proven that the tubing will yield before a Brennan Double-Ferrule joint starts leaking.
  
  Brennan Instrumentation Tube Fitting Features:
  · Self-aligning
  · Work on thick and thin wall tubing
  · Resist vibration
  · Work on a variety of tube materials
  · All components are made of the same material for thermal compatibility and corrosion resistance
  · Resist temperature cycling
  · Compensate for the variables encountered in the tube and materials
  · Do not significantly reduce flow area
  
  Performance
  · Work in vacuums, as well as at low and high pressures
  · Seal at low cryogenic temperatures, as well as elevated temperatures rated for the tube
  · Seal consistently over a wide range of temperature cycling
  · Seal repeatedly under both make and remake conditions
  · Resist pressure beyond the tubing burst point
  
  Assembly
  · Use geometry rather than torque for uniformity of make-up. (To complete the joint, it requires only a 1-1/4 turn after snug-tightening.)
  · Do not require disassembly and inspection of ferrule swaging at every make-up
  · Do not require any special tools for assembly

  Days to Ship:	11 Days

Loading...