Screw Maintenance Components

• 

  Copper Gauze

  MISUMI

  [Applications]
  Used to accommodate the removal of caked resin from the screw.
  [Features]
  · Copper Gauze can be wrapped around the screw in a large contact area, comparing to brush, resulting in more effectiveness.　 Furthermore, the Copper Gauze can be used during the polishing process, after applying Wax for Screw Maintenanc (M-HGMX) to ensure that the Wax is applied thoroughly.

  • Volume Discount

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Cylinder Brush

  MISUMI

  [Applications]
  Used to clean cylinders. It is for cleaning hardened cylinders.
  [Features]
  Made for molding machine cylinders, it is unlikely to scratch the cylinder interior.
  Use in combination with the extension shaft (M-WES-S, M-WES-G).
  'For details on the extension shaft, click here
  

  • Volume Discount

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Molding Gloves

  MISUMI

  [Applications]
  M-HML: Use for maintenance of screws, nozzles, band heaters, etc.
  M-HMM: In addition to the M-HML, these gloves are Kevlar blended, resulting in high function gloves with the same resistant properties as cut-resistant gloves.（ American National Standards InstituteANSI/ISEA105-2016 CUT LEVEL A3 Conformance）
  M-HMH: High-temperature gloves for diecasting. Use according to the temperature.

  • Volume Discount

  Days to Ship:	11 Days or more

• 

  Stainless Steel Gauze

  MISUMI

  [Applications]
  Used to accommodate the removal of caked resin from the screw.
  [Features]
  · Copper Gauze can be wrapped around the screw in a large contact area, comparing to brush, resulting in more effectiveness. Furthermore, the Copper Gauze can be used during the polishing process, after applying Wax for Screw Maintenanc(M-HGMX), (M-HGMX) to ensure that the Wax is applied thoroughly.

  • Volume Discount

  Days to Ship:	Same day

  Show Stock Products

• 

  Extension Shaft

  MISUMI

  [Applications]
  Used to clean cylinders.
  An extension shaft to be connected with a cylinder brush.
  For details on the cylinder brush, click here
  

  • Volume Discount

  Days to Ship:	Same day

  Show Stock Products

• 

  Screw Head Disassembly Wrench【1-5 Pieces Per Package】

  MISUMI

  [Applications]
  · Used to remove screw heads from screws.
  [Features]
  · S type can be used for screw heads for 3, 4 and 5-groove. L type is for 4 and 5-groove.
  · Designed to fit to the screw head in balance just by pushing the claw into the holes with engraved numbers 3, 4 and 5 on one side and turning the slotted screw on the push-in side, which enables smooth removal work. The engraving of L type is the numbers 4 and 5.
  · It comes with five claws, each of which can be independently tightened. The tip of the claw is brass, which prevents it from damaging screw heads.

  • Volume Discount

  Days to Ship:	10 Days or more

• 

  Screw Hand Puller

  MISUMI

  [Applications]
  It is used for removing screws from a Injection machine.
  [Features]
  With a screw type adjustment structure, it supports various screw outer diameters.
  The tip of the claw is brass, which prevents it from damaging screws.

  • Volume Discount

  Days to Ship:	10 Days or more

• 

  Pipe Jig (MISUMI)

  MISUMI

  • Application :
  ・Use to remove the plasticizing cylinders and etc. of Injection Molding Machine manufactured by Sodick.
  ・If the nut cannot be loosened using the extend socket, insert the pipe type jig into the handle and turn the jig.

  • Volume Discount

  CAD ：

  2D / 3D

  Days to Ship:	8 Days or more

• 

  Wax for Screw Maintenance

  MISUMI

  [Applications]
  · Used to remove caked resin from screws.
  [Features]
  · Large equipment and device are not neccesary.
  · One piece of M-HGMX can be used to clean φ20 screw approximately 20 times.

  • Volume Discount

  Days to Ship:	Same day

  Show Stock Products

• 

  Roller Pedestal for Screw

  MISUMI

  [Applications]
  The installation width of the roller can be adjusted in three steps according to the screw diameter. (Supports screw diameters of Φ25 to 200)
  [Features]
  Enables cleaning work while placing and turning screws. The same process applies when checking the external appearance of the screw.

  • Volume Discount

  Days to Ship:	10 Days or more

• 

  Soft Vise Liner

  MISUMI

  [Applications]
  Used to fix screws with a vise.
  It has a horizontal V-groove on one side and a 45° V-groove in the vertical direction on the other side, allowing objects with uneven shapes to be fixed in close contact.
  [Features]
  As it has a magnet, it can be easily installed to a vise.
  As it is fixed, screw maintenance can be performed by one person.

  • Volume Discount

  Days to Ship:	Same day

  Show Stock Products

• 

  Screw Remover (MISUMI)

  MISUMI

  • Application : Use to remove the injection screw of Injection Molding Machine manufactured by Sodick.
  
  

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Extention Socket (MISUMI)

  MISUMI

  • Application : Use to remove the plasticizing cylinder of Injection Molding Machine manufactured by Sodick.

  • Volume Discount

  Days to Ship:	8 Days or more

Loading...