(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Screwdriver Bit - Phillips/Box Type
OMISEIKI
[Features]
·It meets our own high-precision standards and is quality controlled.
·The best durability can be obtained by selecting a hardness that matches the application.
·Special products can also be manufactured in small lots.
[Applications]
·Compatible manufacturers: Nitto Kohki (Delvo).
Days to Ship: | Same day or more |
---|
Show Stock Products
Screwdriver Bit Holder - Magnetic, MF Series
OMISEIKI
•Tip Model : Screw Catch
•Single Item / Set : Single Item
For complete product overview and details on Mag Fit, see the sections below:
Days to Ship: | 9 Days or more |
---|
Phillips Screwdriver Bit - Double-Grooved, Magnetic【10 Pieces Per Package】
Trusco Nakayama
[Features]
· Shaft is thin at 4.5 mm and ideal for fastening screws in deep places, on terminal blocks, or in fine spaces in home electronics.
· Original special alloy is used to boast superior precision and durability.
· It is a double groove type that can be used for electric tools with both 13 mm and 9.5 mm ball groove sizes.
[Applications]
· Ideal for narrow holes in home appliances, terminal blocks, and deep screw holes.
· Screw-tightening of door sash.
Days to Ship: | 9 Days or more |
---|
Screwdriver Bit - Stepped Type, Magnetic, Yellow Set【10 Pieces Per Package】
ANEX
[Features]
· Stepped type.
· For easily distinguishing tip sizes by color.
Days to Ship: | 9 Days or more |
---|
Screwdriver Bit Holder - Magnetic, BSP-65
SUNFLAG
[Features]
· Heavy duty magnet securely catches even long screws.
· Enables work to be performed without worry regarding falling screws.
[Applications]
· Construction work, interior work, electric work, vehicle maintenance work, etc.
Days to Ship: | 8 Days or more |
---|
Hex Shank Screw Catch Bit - Stainless Steel, SBC-170
SK 11
•Tip Model : Screw Catch
•Single Item / Set : Single Item
•Phillips head : No. 2
For complete product overview and details on Hexagonal Shank Screw Catching Bit, see the sections below:
Days to Ship: | 8 Days or more |
---|
Phillips/Slotted Screwdriver Bit - Ceramic, D-282/283/284/285
Hozan
A replacement ceramic adjustment driver for adjusting pre-set knobs/capacitors on printed circuit boards.
[Features]
· Uses zirconia ceramic that does not cause coil misalignment.
· Has greater durability against wear and damage than alumina ceramics.
· Alumina ceramic: Fine ceramic material. Besides abrasion resistance, it is excellent in heat and chemical resistance.
[Applications]
· Flathead 0.9 x flathead 1.8 mm, blade thickness 0.4 mm (D-282).
· Flathead 1.3 x flathead 2.6 mm, blade thickness 0.4 mm (D-283).
· Phillips No. 0 (D-284).
· Cross shape, blade width 1.7 mm (D-285).
Days to Ship: | 8 Days or more |
---|
VESSEL
Two stepped tool bits with magnets included. Fine shaft specification that can be inserted in narrow spaces.
[Features]
· Stepped type. Fine shaft bit that can be inserted in narrow places.
· High strength magnet built in.
[Applications]
· For light electrical equipment assembly, communication acoustic equipment assembly, building, and civil engineering work.
Days to Ship: | 9 Days or more |
---|
Phillips Screwdriver Bit - Double Ended
VESSEL
A double-headed bit that can be reversed even if one side is damaged.
[Features]
· A wide range of sizes and heat treatment classification.
[Applications]
· For various screw fastening work.
Days to Ship: | 9 Days or more |
---|
Hex Screwdriver Bit Holder - Magnetic, BITH6.35-2【2 Pieces Per Package】
HIT
•Tip Model : Screw Catch
•Single Item / Set : Single Item
For complete product overview and details on Magnet Bit Holder, see the sections below:
Days to Ship: | 12 Days or more |
---|
Screwdriver Bit Adapter - Universal Type for Electric Driver
Trusco Nakayama
[Features]
· Can be used across a wide range with a swing angle of 30°, making it ideal for working in corners or in narrow spaces with obstacles.
· With finger rest.
· For hexagon shank (6.35 mm) bits.
[Applications]
· Various bits can be fitted.
Days to Ship: | 9 Days or more |
---|
Phillips Screwdriver Bit - Magnetic, Red
ANEX
•Tip Model : Plus (+)
•Single Item / Set : Single Item
•Phillips head : Others
For complete product overview and details on Pozidriv Color Bit (Magnetic), see the sections below:
Days to Ship: | 9 Days or more |
---|
Torx Screwdriver Bit - Individual/Set, ACTX/ACTX-L/ACTX-N
ANEX
[Features]
· Sizes can be identified with colors.
· Both ends are unpainted so that the painted part will not get in the way when an electric screwdriver is attached.
Days to Ship: | 8 Days or more |
---|
Torsion Impact Screwdriver Bit - Slim, Magnetic
ANEX
[Features]
· Our original 3-flute torsion structure absorbs impact and reduced the load on the bit tip.
· It has a slim tip and the screw head can be seen well.
· Our original 3-flute torsion structure reduces core misalignment.
· Our original 3-flute torsion structure strongly transmits torque.
· White Coating
Days to Ship: | 9 Days or more |
---|
Screwdriver Bit Holder - Stainless Steel, ASC
ANEX
[Features]
· Firmly holds stainless steel screws that do not adhere to magnets.
Days to Ship: | 8 Days or more |
---|
Screwdriver Bit Holder - Magnetized, MRB
NAGAHORIKOGYO
•Tip Model : Screw Catch
•Single Item / Set : Single Item
For complete product overview and details on Magnetized Holder, see the sections below:
Days to Ship: | 9 Days or more |
---|
Screwdriver Bit - Hex Shank, Combined Insert
OMISEIKI
•Tip Model : Hex Type (Hexagonal)
•Single Item / Set : Single Item
For complete product overview and details on Screwdriver Bit (Hexagon Type), see the sections below:
Days to Ship: | 9 Days or more |
---|
Taper Phillips Screwdriver Bit - Slim Type, Magnetic【5-10 Pieces Per Package】
SUNFLAG
•Tip Model : Plus (+)
•Overall Length : 110, 125, 65, 65pÇü85pÇü110, 85
•Single Item / Set : Set Product, Single Item
•Phillips head : No. 2
For complete product overview and details on Taper Slim X Bit (Magnetic), see the sections below:
Days to Ship: | 9 Days or more |
---|
Super Slim Torsion Bit (Magnetic)【10 Pieces Per Package】
SUNFLAG
[Features]
· The durability of the tip is greatly improved with our original torsion machining by absorbing right and left rotational torque.
· Cam-out during rotation is suppressed with a special tip shape.
[Applications]
· Ideal for building related tasks, furniture assembling, vehicle maintenance, electric construction work, factory work, etc.
· Supports hard screw-driving work in C channels / aluminum / iron plate / hardwood, etc.
Days to Ship: | 12 Days or more |
---|
Screwdriver Bit - Various Drives, Long/Short
WERA
•Tip Model : Box Model, Hex Type (Hexagonal), Minus (-), Plus (+), Square Type, Torx Type (Hexalobular)
•Overall Length : 200 mA or less, 25, 32, 35, 50, 65, 70
•Single Item / Set : Single Item
•Phillips head : No.00, No. 0, No. 1, No. 2, No. 3, No. 4
•Tip Size / Minus (-) Blade Width (mm) : 12-24 VDC -¦10%, 3, 4, 4.5, 8, Equipped with RS-232C
•Tip Opposite Side Dimensions (mm) : 1.5, 10.0, 11.0, 12.0, 13.0, 2.0, 2.5, 3.0, 4.0, 5.0, 5.5, 6.0, 7.0, 8.0, 9.0, SQ1, SQ2, SQ3
For complete product overview and details on Screwdriver Bit, see the sections below:
Days to Ship: | 8 Days or more |
---|
Screwdriver Bit Holder - Impactor with Retaining Ring and Magnet
WERA
•Tip Model : Adapter
•Single Item / Set : Single Item
For complete product overview and details on Impactor Bit Holder, see the sections below:
Days to Ship: | 8 Days or more |
---|
Screwdriver Bit Holder - Universal Type, Stainless Steel
WERA
•Tip Model : Adapter
•Single Item / Set : Single Item
For complete product overview and details on Stainless Steel Universal Bit Holder, see the sections below:
Days to Ship: | 8 Days or more |
---|
Screwdriver Spanner Bit - Hex Shank, Snake-Eye Type
PB SWISS TOOLS
• 1/4" (6.35 mm) insertion angle SNAKE-EYE bit of excellent strength and precision.
Days to Ship: | 8 Days or more |
---|
1/4" HEX Stepped Hexalobular Bits
PB SWISS TOOLS
● 1/4" (6.35 mm) insertion angle stepped hexalobular bit of excellent strength and precision.
Days to Ship: | 12 Days or more |
---|
Screwdriver Bit Holder - Universal Type, Hex Shank, Short
PB SWISS TOOLS
• The handle is a Swiss grip, making it easy to apply weight.
Days to Ship: | 8 Days or more |
---|
Days to Ship: | 7 Days or more |
---|
Screwdriver Bit Holder - Compatible with 6.35 Axes, Steel, SBH
SK 11
•Tip Model: Others
•Set/Single Item: Single Item
•Double-headed Function: Not Included
•Includes Cutting Edge Magnet Function: Not Included
•Specification: Bit compatible with 6.35 mm shaft
Days to Ship: | 8 Days or more |
---|
Screwdriver Bit Holder Set - Portable, SBH-SET
SK 11
•Tip Model : Others
•Single Item / Set : Single Item
For complete product overview and details on Mobile Bit Holder Set, see the sections below:
Days to Ship: | 8 Days or more |
---|
Screwdriver Bit Holder Set - Portable, Color SBH-SET
SK 11
•Tip Model: Others
•Set/Single Item: Single Item
•Double-headed Function: Not Included
•Includes Cutting Edge Magnet Function: Not Included
•Specification: Bit compatible with 6.35 mm shaft
Days to Ship: | 8 Days or more |
---|
Torx Screwdriver Bit - Standard Type, 7045ZTX
WIHA
•Tip Model : Torx Type (Hexalobular)
•Single Item / Set : Single Item
For complete product overview and details on Standard Torx® Bit E6.3, see the sections below:
Days to Ship: | 8 Days or more |
---|
Hex Screwdriver Bit - Magic Ring, Long
WIHA
•Tip Model : Hex Type (Hexagonal)
•Single Item / Set : Single Item
For complete product overview and details on Hex Bit with Magic Ring (1/4 Inch) Long, see the sections below:
Days to Ship: | 8 Days or more |
---|
Impact Screwdriver Bit - Replaceable Type
TONE
Replacement type impact screwdriver bit.
[Features]
· Can be used by inserting into a bit holder.
[Applications]
· Ideal for a wide range of maintenance work, such as maintenance of automobiles, motorcycles, bicycles, etc. and maintenance of industrial equipment.
Days to Ship: | 8 Days or more |
---|
Phillips Screwdriver Bit - Double Ended, TB-H/TBM-H
Trusco Nakayama
Original special alloy is used to deliver excellent durability. It has been manufactured with strict dimensional accuracy according to the JIS standard and JCIS standard, achieving outstanding fitting with screws.
Days to Ship: | 8 Days or more |
---|
Trusco Nakayama
Original special alloy is used to deliver excellent durability. It has been manufactured with strict dimensional accuracy according to the JIS standard and JCIS standard, achieving outstanding fitting with screws.
Days to Ship: | Same day |
---|
Show Stock Products
Screwdriver Bit Holder - Round/Hex Shank Compatible, Magnetic, TMC-8
Trusco Nakayama
Can be magnetized/demagnetized. Can be used with round shafts of up to 8 mm and hexagonal shafts of up to 6.35 mm.
Days to Ship: | 9 Days or more |
---|
Torx HF Screwdriver Bit - Hex Shank, Short
WERA
•Tip Model : Torx Type (Hexalobular)
•Overall Length : 200 mA or less, 25, 50
•Single Item / Set : Single Item
For complete product overview and details on Torx® HF Bit, see the sections below:
Days to Ship: | 8 Days or more |
---|
Days to Ship: | 7 Days or more |
---|
Torx Screwdriver Bit - High Precision for HIOS
WERA
•Tip Model : Torx Type (Hexalobular)
•Single Item / Set : Single Item
For complete product overview and details on Torx® Bit, HIOS Used (5 mm Shank Diameter), see the sections below:
Days to Ship: | 7 Days or more |
---|
Days to Ship: | 8 Days or more |
---|
Screwdriver Bit Holder - Stainless Steel, Magnetic
WERA
•Tip Model : Adapter
•Single Item / Set : Single Item
For complete product overview and details on Stainless Steel Bit Holder, see the sections below:
Days to Ship: | 9 Days or more |
---|
Screwdriver Bit Holder - Quick Release
WERA
•Tip Model : Adapter
•Single Item / Set : Single Item
For complete product overview and details on Bit Holder, see the sections below:
Days to Ship: | 10 Days or more |
---|
Screwdriver Bit Holder - 2-Piece Set with Key Adapter and Carabiner
BESTTOOL
•Tip Model : Others
•Single Item / Set : Single Item
For complete product overview and details on 2PC Bit Holder with AD, see the sections below:
Days to Ship: | 8 Days or more |
---|
Screwdriver Bit Holder - Key Adapter Included
BESTTOOL
•Tip Model : Others
•Single Item / Set : Single Item
For complete product overview and details on Bit Holder with AD, see the sections below:
Days to Ship: | 8 Days or more |
---|
Screwdriver Bit Holder - Belt Loop and Key Adapter Included
BESTTOOL
•Tip Model : Others
•Single Item / Set : Single Item
For complete product overview and details on Bit Holder with Belt Loop, see the sections below:
Days to Ship: | 9 Days or more |
---|
Phillips Screwdriver Bit - Stepped Type, Magnetic, Yellow Set【5 Pieces Per Package】
ANEX
Double-head type. Both ends are unpainted and cutting edge accuracy is outstanding.
Days to Ship: | 9 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Tip Model |
Link Diameter(mm) |
Overall Length(mm) |
Single Item / Set |
Phillips head |
Tip Size / Minus (-) Blade Width (mm) |
Tip Opposite Side Dimensions (mm) |
Quantity of Bits Included |
With or Without Cutting Edge Magnet Function |
Double-Headed Function |
Tip Size / Minus (-) Blade Thickness (mm) |
Brand | OMISEIKI | OMISEIKI | Trusco Nakayama | ANEX | SUNFLAG | SK 11 | Hozan | VESSEL | VESSEL | HIT | Trusco Nakayama | ANEX | ANEX | ANEX | ANEX | NAGAHORIKOGYO | OMISEIKI | SUNFLAG | SUNFLAG | WERA | WERA | WERA | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | EARTH MAN | SK 11 | SK 11 | SK 11 | WIHA | WIHA | TONE | Trusco Nakayama | Trusco Nakayama | Trusco Nakayama | WERA | WERA | WERA | WERA | WERA | WERA | BESTTOOL | BESTTOOL | BESTTOOL | ANEX |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Phillips Screwdriver Bit - Double-Grooved, Magnetic【10 Pieces Per Package】 | Screwdriver Bit - Stepped Type, Magnetic, Yellow Set【10 Pieces Per Package】 | Phillips/Slotted Screwdriver Bit - Ceramic, D-282/283/284/285 | Hex Screwdriver Bit Holder - Magnetic, BITH6.35-2【2 Pieces Per Package】 | Screwdriver Bit Adapter - Universal Type for Electric Driver | Taper Phillips Screwdriver Bit - Slim Type, Magnetic【5-10 Pieces Per Package】 | Screwdriver Bit Holder - Impactor with Retaining Ring and Magnet | Screwdriver Bit Holder - Compatible with 6.35 Axes, Steel, SBH | Screwdriver Bit Holder - Round/Hex Shank Compatible, Magnetic, TMC-8 | Screwdriver Bit Holder - 2-Piece Set with Key Adapter and Carabiner | Phillips Screwdriver Bit - Stepped Type, Magnetic, Yellow Set【5 Pieces Per Package】 | ||||||||||||||||||||||||||||||||||
Days to Ship |
Same day or more
Show Stock Products | 9 Days or more | 9 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 9 Days or more | 12 Days or more | 9 Days or more | 9 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 12 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 12 Days or more | 8 Days or more | 7 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day
Show Stock Products | 9 Days or more | 8 Days or more | 7 Days or more | 7 Days or more | 8 Days or more | 9 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 9 Days or more |
Tip Model | Plus (+) / Torx Type (Hexalobular) / Box Model | Screw Catch | Plus (+) | Plus (+) | Screw Catch | Screw Catch | Plus (+) / Minus (-) | Plus (+) | Plus (+) | Screw Catch | Adapter | Plus (+) | Torx Type (Hexalobular) | Plus (+) | Screw Catch | Screw Catch | Hex Type (Hexagonal) | Plus (+) | Plus (+) | Hex Type (Hexagonal) / Torx Type (Hexalobular) | Adapter | Adapter | Special Application | Torx Type (Hexalobular) | Others | Others | Others | Others | Others | Torx Type (Hexalobular) | Hex Type (Hexagonal) | Plus (+) / Minus (-) / Hex Type (Hexagonal) | Plus (+) | Plus (+) | Screw Catch | Torx Type (Hexalobular) | Torx Type (Hexalobular) | Torx Type (Hexalobular) | Torx Type (Hexalobular) | Adapter | Adapter | Others | Others | Others | Plus (+) |
Link Diameter(mm) | 4 ~ 6.35 | - | 6.35 | 6.35 | 6.35 | 6.35 | - | 6.35 | 6.35 | - | 6.35 | 6.35 | 6.35 | 6.35 | - | - | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | - | - | - | - | - | 6.35 | 6.35 | 6.35 | 6.35 | 6.35 | - | 6.35 | 4 | 5 | 4 | 6.35 | 6.35 | - | - | - | 6.35 |
Overall Length(mm) | 44 ~ 300 | 10 ~ 13 | 150 | 65 ~ 150 | 24 | 170 | 56 ~ 71 | 100 | 150 | 27 | 94 | 110 | 65 | 200 | 65 | 13 | 70 | 110 | 110 | 25 ~ 50 | 75 | 50 | 39 | 50 | 135 | - | - | - | - | 150 | 50 | 65 ~ 75 | 150 | 65 | 48 | 25 ~ 89 | 40 | 60 | 70 | 50 ~ 152 | 77 | - | - | - | 65 ~ 150 |
Single Item / Set | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item |
Phillips head | No. 1 ~ No. 2 | - | No. 2 | No. 1 ~ No. 2 | No. 2 | No. 2 | No. 0 ~ Others | No. 2 | No. 2 | - | - | Others | - | No. 2 | - | - | - | No. 2 | No. 2 | - | - | - | - | - | - | - | - | - | - | - | - | No. 2 ~ No. 3 | No. 2 | No. 2 | - | - | - | - | - | - | - | - | - | - | No. 2 |
Tip Size / Minus (-) Blade Width (mm) | - | - | - | - | - | - | 0.9 ~ 2.6 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 7 | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tip Opposite Side Dimensions (mm) | 5.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 8 | - | - | 4 | - | - | - | - | - | - | - | - | - | - | 5 | 3 ~ 4 | - | - | - | - | - | - | - | - | - | - | - | - | - |
Quantity of Bits Included | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
With or Without Cutting Edge Magnet Function | Not Included | Not Included | Included | Included | Not Included | Not Included | Not Included | Included | Not Included | Not Included | Not Included | Included | Not Included | Included | Not Included | Not Included | Not Included | Included | Included | Not Included | Not Included | Not Included | Not Included | Not Included | Not Included | Not Included | Not Included | Not Included | Not Included | Not Included | Not Included | Not Included | Not Included | Not Included | Included | Not Included | Not Included | Not Included | Not Included | Included | Included | Not Included | Not Included | Not Included | Included |
Double-Headed Function | Not Included | Not Included | Not Included | Not Included | Included | Not Included | Not Included | Not Included | Included | Not Included | Not Included | Included | Not Included | Included | Not Included | Included | Not Included | Included | Included | Not Included | Not Included | Not Included | Not Included | Not Included | Not Included | Not Included | Not Included | Not Included | Not Included | Not Included | Not Included | Included | Included | Not Included | Not Included | Not Included | Not Included | Not Included | Not Included | Not Included | Not Included | Not Included | Not Included | Not Included | Not Included |
Tip Size / Minus (-) Blade Thickness (mm) | - | - | - | - | - | - | 0.4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.9 | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy