(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
TONE
Standard type screwdriver with a wooden handle.
[Features]
· Standard type screwdriver with a wooden handle with a sense of warmth.
· Through screwdriver.
[Applications]
· Ideal for a wide range of maintenance work, such as maintenance of automobiles, motorcycles, bicycles, etc. and maintenance of industrial equipment.
Days to Ship: | 8 Days or more |
---|
Piercing Screwdriver (Incorporating Magnet)
Trusco Nakayama
[Features]
· Features a non-slip ergonomically designed grip.
· The hexagon nut attached to the base of the shaft can be used together with a wrench to enable strong turning.
Days to Ship: | 9 Days or more |
---|
Ordinary Screwdriver (w/ Magnet)
Trusco Nakayama
[Features]
· Features a non-slip ergonomically designed grip.
· Features a non-slip ergonomically designed grip.
Days to Ship: | 9 Days or more |
---|
Swiss Grip Flathead Screwdriver
PB SWISS TOOLS
Screwdriver made from 2 new materials: polypropylene and santoprene.
[Features]
· The symbol and size of the driver tip shape are shown on the rear of the handle.
· A screwdriver suited for the task can be selected quickly.
· The handle shape features the same ergonomic design as the Multi-craft.
· The carefully selected surface material is close to the hardness of human hands, making it feel soft and warm.
· With a special surface structure, the handle can be grasped firmly even with wet hands.
· Resistant to oil and gasoline, allowing it to be easily cleaned. Heat resistance of 140°C.
[Applications]
· Convenient for high-tech fields, assembly lines, and home use. Ideal for rapid turning.
Days to Ship: | 8 Days or more |
---|
Soft Screwdriver (Penetrating Type with Magnet)
KYOTO TOOL
[Features]
· The grip is light, not sticky, and uses environmentally friendly elastomer resin.
· The shaft is round.
· Through-hole type.
Days to Ship: | 9 Days or more |
---|
Days to Ship: | 7 Days or more |
---|
Stainless Steel Stubby Screwdriver SSSD-M2
TONE
An all-stainless steel stubby flathead screwdriver which is lightweight thanks to its sealed hollow grip section, and which features excellent workability and corrosion resistance.
[Features]
· The shaft uses martensitic stainless steel material, and the grip uses austenitic stainless steel material.
· Stainless steel tool with emphasized strength, corrosion resistance, chemical resistance and hygiene.
[Applications]
· Ideal for food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development.
· Ideal for places that use stainless steel bolts and nuts such as plants, waterproofing work, plumbing and cleaning equipment.
Days to Ship: | 12 Days or more |
---|
Stainless Steel Screwdriver SMD-100
TONE
An all-stainless steel flathead screwdriver which is lightweight thanks to its sealed hollow grip section, and which features excellent workability and corrosion resistance.
[Features]
· The shaft uses martensitic stainless steel material, and the grip uses austenitic stainless steel material.
· Stainless steel tool with emphasized strength, corrosion resistance, chemical resistance and hygiene.
[Applications]
· Ideal for food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development.
· Ideal for places that use stainless steel bolts and nuts such as plants, waterproofing work, plumbing and cleaning equipment.
Days to Ship: | 16 Days or more |
---|
Stainless Steel Screwdriver SMD-150
TONE
Lightweight, all-stainless flathead screwdriver with excellent workability and corrosion resistance.
[Features]
· The shaft uses martensitic stainless steel material, and the grip uses austenitic stainless steel material.
· Stainless steel tool with emphasized strength, corrosion resistance, chemical resistance and hygiene.
[Applications]
· Food-related equipment, medical equipment, cleanrooms, precision machinery, and ships.
· For marine sports, marine development, plants, waterproof construction and water supply construction.
· Ideal for places that use stainless steel bolts and nuts such as cleaning equipment.
Days to Ship: | 12 Days or more |
---|
Long Shaft Screwdriver (Through) KLD-M3
TONE
With a flathead tip of 1.0 x 9.0 and total length of 380 mm, it is ideal for work at places where standard long shaft screwdrivers cannot reach.
[Features]
· Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening.
· The tip has a high-strength magnet.
· Through-hole type.
· Total length: 380 mm.
· 275 mm shaft length.
[Applications]
· Ideal for assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.
Days to Ship: | 12 Days or more |
---|
TONE
Flathead stubby screwdriver with an overall length of 70 mm.
[Features]
· The total length is short, making it ideal for working in narrow places.
[Applications]
· Automobile interiors, and maintenance of motorcycles, bicycles, and machinery.
Days to Ship: | 8 Days or more |
---|
TONE
Baby screwdriver with round shaft.
[Features]
· Convenient for adjustment of metering and precision equipment, etc.
[Applications]
· Ideal for assembly and maintenance of electronic devices and precision equipment.
· Ideal for assembly and maintenance work automobiles, motorcycles and bicycles.
Days to Ship: | 12 Days or more |
---|
Ultra Mini Stubby Screwdriver SSD-M2
TONE
Ultra mini flathead stubby screwdriver with an overall length of 70 mm.
[Features]
· The total length is short, making it ideal for working in narrow places.
[Applications]
· Ideal for automobile interiors, and maintenance of motorcycles, bicycles, and machinery.
Days to Ship: | 12 Days or more |
---|
Interchangeable Ceramic Adjustable Screwdriver D-280
Hozan
· A perfect driver for adjusting pre-set knobs/capacitors on printed circuit boards.
[Features]
· Uses zirconia ceramic that does not cause coil misalignment.
· Has greater durability against wear and damage than alumina ceramics.
* Alumina ceramic: Fine ceramic. Besides abrasion resistance, it is excellent in heat and chemical resistance.
[Applications]
· Combination: D-280, -0.9 x -1.8 mm, blade thickness 0.4 mm (D-282), -1.3 x -2.6 mm, blade thickness 0.4 mm (D-283).
Days to Ship: | 8 Days or more |
---|
Stainless Steel Screwdriver SMD-075
TONE
An all-stainless steel flathead screwdriver which is lightweight thanks to its sealed hollow grip section, and which features excellent workability and corrosion resistance.
[Features]
· The shaft uses martensitic stainless steel material, and the grip uses austenitic stainless steel material.
· Stainless steel tool with emphasized strength, corrosion resistance, chemical resistance and hygiene.
[Applications]
· Food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development, plants, waterproofing construction, plumbing work, etc.
· Ideal for places that use stainless steel bolts and nuts such as cleaning equipment.
Days to Ship: | 12 Days or more |
---|
TONE
Baby screwdriver with round shaft.
[Features]
Convenient for adjustment of metering and precision equipment, etc.
[Applications]
· For assembly and maintenance of electronic devices and precision equipment.
· Assembly and maintenance work of automobiles, motorcycles and bicycles.
Days to Ship: | 12 Days or more |
---|
TONE
Square shaft through screwdriver.
[Features]
· Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening.
· The tip has a high-strength magnet.
· Plastic grip.
[Applications]
· Ideal for assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.
Days to Ship: | 13 Days or more |
---|
TONE
A piercing square-shafted driver with a plastic grip.
[Features]
· Plastic grip.
· Flathead shaft length: 150 mm, total length: 260 mm.
· Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening.
· The tip has a high-strength magnet.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.
Days to Ship: | 12 Days or more |
---|
Hozan
Fine drill pin vise for applications including but not limited to grasping small diameter drills and rotating them, including grasping pin (rod) shaped objects securely.
[Features]
· As the main body is compact, it is easy to see the work at hand.
· Also, there is less load in continuous work as it is a light finish.
· Body is rather thick which makes it easy to apply force, and it has line knurling which makes it anti-slip and easy to turn.
[Applications]
· It can also be used for drilling on precision parts and substrates, for plastic models, for etching by grasping a needle (probe), etc.
· A fixed-type collet, body-integral, compact single-head type.
Days to Ship: | 8 Days or more |
---|
Stainless Steel Screwdriver SUMD
TONE
For tightening and loosening screws. The shaft is made of martensitic stainless steel.
Days to Ship: | 12 Days or more |
---|
TONE
Square shaft through screwdriver.
[Features]
· Shaft has a square shape that allows it to be used in conjunction with monkey wrenches or other wrenches for heavy duty fastening.
· Plastic grip.
· The tip has a high-strength magnet.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.
Days to Ship: | 8 Days or more |
---|
Electroscopic Screwdriver DKD-01/DKD-02
ENGINEER
•Standards for Tip Shape : Minus (-)
•Single Item / Set Classification : Single Item
•Shaft type : Round
•Magnet : None
•Shaft thru : None
For complete product overview and details on Electroscopic Screwdriver DKD-01/DKD-02, see the sections below:
Days to Ship: | 8 Days or more |
---|
"Superfit" ACR Heavy-Duty Screwdriver (Magnetic)
ANEX
•Standards for Tip Shape : Minus (-), Plus (+)
•Phillips Tip Size (+) : No. 1, No. 2, No. 3
•Single Item / Set Classification : Single Item
•Shaft type : Round
•Magnet : Included
•Shaft thru : Included
For complete product overview and details on Superfit ACR Heavy-Duty Screwdriver (Magnetic), see the sections below:
Days to Ship: | 9 Days or more |
---|
Stubby Phosphorescent Screwdriver (Stubby Type / Magnetic)
ANEX
[Features]
· Uses a special luminescent resin that glows in the dark. Screwdriver can be easily found even in dark places. (Emits light for 24 hours after being subjected to direct sunlight for 10 minutes)
· Martensitic special stainless steel (high strength stainless steel (550)).
Days to Ship: | 9 Days or more |
---|
Screwdrivers - Split Grip, Through-Hole, 9210
ANEX
•Standards for Tip Shape : Minus (-)
•Single Item / Set Classification : Single Item
•Shaft type : Round
•Magnet : None
•Shaft thru : Included
For complete product overview and details on Split Grip Screwdriver (Through), see the sections below:
Days to Ship: | 8 Days or more |
---|
HIRAIKOGU
•Standards for Tip Shape : Minus (-)
•Single Item / Set Classification : Single Item
•Shaft type : Square
•Magnet : None
•Shaft thru : None
For complete product overview and details on Wide Driver, see the sections below:
Days to Ship: | 9 Days or more |
---|
WERA
•Standards for Tip Shape : Minus (-), Plus (+)
•Phillips Tip Size (+) : No. 0, No. 1, No. 2, No. 3, No. 4
•Single Item / Set Classification : Single Item
•Shaft type : Round
•Magnet : None
•Shaft thru : None
For complete product overview and details on Craft Form Screwdriver, see the sections below:
Days to Ship: | 8 Days or more |
---|
Days to Ship: | 8 Days or more |
---|
Flathead Screwdriver (with Hexagonal Base)
PB SWISS TOOLS
Hexagonal shaped part at base of blade enables rotation by applying additional torque with a wrench.
Days to Ship: | 8 Days or more |
---|
PB SWISS TOOLS
A screwdriver with excellent shock resistance which can be used for general purposes.
[Features]
· Screwdriver with excellent track record, millions of units sold over the past several decades.
· The grip surface fits the hand and the groove design is ergonomic, allowing high torque to be applied.
· The high quality and transparent CAB material is extremely resistant to impacts as well as resistant to oil and gasoline, and can be recycled.
[Applications]
· Used in various fields such as manufacturing industries, assembly sites, repairs, artisan handcrafting, DIY, hobbies, and more.
Days to Ship: | 7 Days or more |
---|
Screwdriver with AC/DC Tester (with Pocket Clip)
PB SWISS TOOLS
A voltage detection screwdriver combining 2 functions into one tool.
[Features]
· Often used by electricians.
· Ergonomically shaped groove allows large force to be transmitted.
· Size 0 for PB175 includes a practical integrated clip which can clasp onto jackets or trousers.
· The steel precision blade has a voltage check function and can also be used as a normal screwdriver.
[Applications]
· Ideal for use as a voltage checker and a screwdriver.
Days to Ship: | 8 Days or more |
---|
Replacement Screwdriver Blades (Flathead)
PB SWISS TOOLS
[Features]
· 215 series flathead screwdriver blade.
· Can be combined and used with 215A, 7215AG or 8215A handles for the replacement screwdrivers.
Days to Ship: | 8 Days or more |
---|
AC/DC Voltage Detector (Standard)
PB SWISS TOOLS
[Features]
· A standard electroscopic screwdriver.
· Operating range 110 to 250 V, 50 to 500 Hz.
· Operating Temperature Range: -10 to 59°C
Days to Ship: | 8 Days or more |
---|
Resin Handle Screwdriver (with Throughput/Magnet)_with Bolster
KYOTO TOOL
[Features]
· Square resin grip which makes it easy to apply force.
· There is a hexagonal part at the base of the shaft.
· Shaft is hexagon shaped.
· Shaft material is Cr-V.
[Applications]
· General purpose tool
Days to Ship: | 9 Days or more |
---|
Screwdrivers - Phillips/Flathead, Through-Hole, PDD1/MDD1
KYOTO TOOL
[Features]
· It is a resin grip that is hard, durable, and prevents dirt.
· The shaft is round.
· Through-hole type.
· Shaft material is Cr-V.
[Applications]
· General purpose tool
Days to Ship: | 9 Days or more |
---|
Resin Handle Screwdriver Long (with Throughput/Magnet)
KYOTO TOOL
[Features]
· Square resin grip which makes it easy to apply force.
· There is a hexagonal part at the base of the shaft.
· Shaft is hexagon shaped.
· Shaft material is Cr-V.
[Applications]
· General purpose tool
Days to Ship: | 9 Days or more |
---|
Screwdrivers - Split Grip, Flathead, Through-Hole, FD
KYOTO TOOL
[Features]
· A screwdriver with improved strength due to a thicker, longer shaft, and a sturdy joint between shaft and handle.
· The shaft material is SWRH62A.
[Applications]
· General purpose tool
Days to Ship: | 8 Days or more |
---|
Wooden Handle Screwdriver (Through, w/ Magnet)
KYOTO TOOL
[Features]
· Natural wooden grip which is easy on the hands.
· The shaft is round.
· Shaft material is Cr-V.
· The tip is magnetic.
[Applications]
· General purpose tool
Days to Ship: | 9 Days or more |
---|
Flat Head Screwdriver with Cap (SoftFinish ®)
WIHA
•Standards for Tip Shape : Minus (-)
•Single Item / Set Classification : Single Item
•Shaft type : Square
•Magnet : None
•Shaft thru : Included
For complete product overview and details on Flat Head Screwdriver with Cap (SoftFinish ®), see the sections below:
Days to Ship: | 8 Days or more |
---|
Days to Ship: | 8 Days or more |
---|
TONE
An ideal screwdriver for working in places that conventional screwdrivers cannot reach.
[Features]
· Long shaft screwdriver with a total length of 395 mm.
· Round shaft type with 267 mm shaft length. With magnet.
· Flathead tip -0.8 x 6.0 mm.
· Phillips tip +No.2 mm.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.
Days to Ship: | 13 Days or more |
---|
Hozan
A micro-sized screwdriver that's turned with fingertips, convenient for carrying, and can be stored anywhere.
[Features]
· Size that is easy to use even in narrow locations. For small screws that do not require force.
· The handle is designed at a length suitable for fingertip turning; while unsuitable for firmly tightened screws, it is effective for rapid turning.
· The tip size is No. 00, making it convenient for fine-tuning trims, trimmers, semi-fixed volume knobs, etc.
· The size and price allow placement where adjustment is necessary.
[Applications]
· Ideal for screws that are difficult to use with general drivers such as those for cameras and optical devices.
· For easily carrying glasses screws in the corners of pen cases, for regulation and for precision machines.
· Since its thin handle does not allow application of torque, it can be used securely for machine screws on instruments and fixtures which can break when too much strength is applied.
Days to Ship: | Same day |
---|
Show Stock Products
Screwdriver with Anti-Drop Ring
ANEX
The cord does not tangle, even when the handle is turned by the rotating cap. With ring for attaching fall prevention cord. Ideal for work in high places.
Days to Ship: | 8 Days or more |
---|
SIGNET
•Standards for Tip Shape : Minus (-)
•Single Item / Set Classification : Single Item
•Shaft type : Round
•Magnet : None
•Shaft thru : Included
For complete product overview and details on thru Flathead Screwdriver, see the sections below:
Days to Ship: | 8 Days or more |
---|
WERA
•Standards for Tip Shape : Minus (-)
•Single Item / Set Classification : Single Item
•Shaft thru : Included
For complete product overview and details on Chisel Driver Craft-Form Plus, see the sections below:
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Standards for Tip Shape |
Phillips Tip Size (+) |
Tip Size, Slotted (-) Blade Width (mm) B1 |
Shaft Length L (mm) |
Single Item / Set Classification |
Shaft Type |
Magnet |
Shaft Through |
Bolster |
Grip Type |
Tip Size, Slotted (-) Blade Thickness (mm) B2 |
(Box / Hexagonal / Ball Point) Two-sided Width Size (mm) |
(Box / Hexagonal / Ball Point) Two-sided Width Dimension (Inch) |
Brand | TONE | Trusco Nakayama | Trusco Nakayama | PB SWISS TOOLS | KYOTO TOOL | ENGINEER | TONE | TONE | TONE | TONE | TONE | TONE | TONE | Hozan | TONE | TONE | TONE | TONE | Hozan | TONE | TONE | ENGINEER | ANEX | ANEX | ANEX | HIRAIKOGU | WERA | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | PB SWISS TOOLS | KYOTO TOOL | KYOTO TOOL | KYOTO TOOL | KYOTO TOOL | KYOTO TOOL | WIHA | ENGINEER | TONE | Hozan | ANEX | SIGNET | WERA |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Resin Handle Screwdriver (with Throughput/Magnet)_with Bolster | ||||||||||||||||||||||||||||||||||||||||||||
Days to Ship | 8 Days or more | 9 Days or more | 9 Days or more | 8 Days or more | 9 Days or more | 7 Days or more | 12 Days or more | 16 Days or more | 12 Days or more | 12 Days or more | 8 Days or more | 12 Days or more | 12 Days or more | 8 Days or more | 12 Days or more | 12 Days or more | 13 Days or more | 12 Days or more | 8 Days or more | 12 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 9 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 7 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 13 Days or more |
Same day
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more |
Standards for Tip Shape | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) | Minus (-) |
Phillips Tip Size (+) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tip Size, Slotted (-) Blade Width (mm) B1 | 4.5 ~ 9 | 6.5 ~ 8 | 8 | 6.5 ~ 10 | 5.5 ~ 6 | 6 | 6 | 6 | 8 | 9 | 7.2 | 3 | 7.2 | 0.9 ~ 2.6 | 5.5 | 3 | 4.9 | 9 | 1.8 | 8 | 6 | - | 6 ~ 8 | 6 | 9.5 ~ 11 | 18 | 8 | 16 ~ 18 | 8 ~ 18 | 3.5 | 2.5 | 4 | 3 | 5.5 ~ 8 | 6 ~ 8 | 5.5 ~ 6.3 | 10 | 6 | 6.5 | 5.5 | 6 | 1.8 | 6 | 5.5 ~ 8 | 7 |
Shaft Length L (mm) | 50 ~ 200 | 100 ~ 150 | 150 | 200 ~ 500 | 75 ~ 100 | 70 | 35 | 100 | 150 | 275 | 23 | 75 | 14 | - | 75 | 50 | 76 | 153 | - | 150 | 102 | 28 | 100 ~ 150 | 35 | 150 ~ 200 | 75 | 175 | 220 ~ 240 | 160 ~ 240 | 200 | 50 | 90 | 50 | 75 ~ 150 | 100 ~ 150 | 300 | 150 | 100 | 125 | 80 | 267 | 23 | 100 | 75 ~ 150 | 138 |
Single Item / Set Classification | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Set Product | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item | Single Item |
Shaft Type | Round | Round | Round | Round | Round | Round | Round | Round | Round | Square | Square | Round | Square | Round | Round | Round | Square | Square | Round | Round | Square | Round | Round | Round | Round | Square | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Round | Square | Round | Round | Round | Round | Round | - |
Magnet | None | Included | Included | None | Included | Included | None | None | None | Included | Included | None | Included | None | None | None | Included | Included | None | None | Included | None | Included | Included | None | None | None | None | None | None | None | None | None | Included | Included | Included | None | Included | None | Included | Included | None | None | None | - |
Shaft Through | Included | Included | None | None | Included | None | None | None | None | Included | None | None | None | - | None | None | Included | Included | None | None | Included | None | Included | None | Included | None | None | None | None | None | None | - | None | Included | Included | Included | Included | Included | Included | None | None | None | None | Included | Included |
Bolster | None | Attached | None | None | None | None | None | None | None | None | None | None | None | - | None | None | None | None | None | None | None | None | Attached | None | None | None | None | None | Attached | None | None | - | None | Attached | None | Attached | None | None | Attached | None | None | None | None | None | Attached |
Grip Type | Wood Handle | Rubber | Rubber | Resin | Rubber | Rubber | Stainless | Stainless | Stainless | Resin | Resin | Resin | Resin | Resin | Stainless | Resin | Resin | Resin | Stainless | Resin | Resin | Resin | Rubber | Resin | Resin | Resin | Rubber | Resin | Resin | Resin | Resin | - | Resin | Resin | Resin | Resin | Resin | Wood Handle | Rubber | Rubber | Resin | Resin | Rubber | Resin | - |
Tip Size, Slotted (-) Blade Thickness (mm) B2 | 0.6 ~ 1.1 | - | - | 1 ~ 1.6 | 0.75 ~ 0.95 | 1 | 0.8 | 1 | 1.1 | 1 | 0.8 | 0.4 | 0.8 | 0.4 | 0.8 | 0.4 | 0.6 | 1 | - | 1.1 | 0.8 | - | - | - | - | 1.8 | - | 2.5 ~ 3 | 1.2 ~ 3 | 0.5 | 0.5 | 0.6 | 0.5 | 0.8 ~ 1.2 | 0.8 ~ 1 | 0.8 ~ 1 | 1.2 | 0.95 | 1.2 | 0.7 | 0.8 | 0.3 | - | 0.75 ~ 1.1 | - |
(Box / Hexagonal / Ball Point) Two-sided Width Size (mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
(Box / Hexagonal / Ball Point) Two-sided Width Dimension (Inch) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy