(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Stainless Steel Extension Bar SEX30-150
TONE
Extension bar featuring durability and rust resistance.
[Features]
· 9.5 mm drive with 150 mm length.
· Material adopts precipitation hardened stainless steel.
· Stainless steel tool with emphasized strength, corrosion resistance, chemical resistance and hygiene.
[Applications]
· Food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development, plants, waterproofing construction, etc.
· Ideal for places that use stainless steel bolts and nuts such as plumbing and cleaning equipment.
Days to Ship: | 12 Days or more |
---|
Stainless Steel Extension Bar SEX30-075
TONE
Extension bar featuring durability and rust resistance.
[Features]
· 9.5 mm drive. Total length: 75 mm.
· This stainless steel tool adopts precipitation hardened stainless steel that emphasizes strength and is rust resistant, and has excellent corrosion resistance, chemical resistance and hygienic properties.
[Applications]
· Food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development, plants, waterproofing construction, and plumbing work.
· Ideal for places that use stainless steel bolts and nuts such as cleaning equipment.
Days to Ship: | 8 Days or more |
---|
Stainless Steel Extension Bar SEX40-150
TONE
Extension bar featuring durability and rust resistance.
[Features]
· 12.7 mm drive with 150 mm length.
· Material adopts precipitation hardened stainless steel.
· Stainless steel tool with emphasized strength, corrosion resistance, chemical resistance and hygiene.
[Applications]
· For food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, etc.
· Ideal for places that use stainless steel bolts and nuts such as marine development, plants, waterproofing work, plumbing and cleaning equipment.
Days to Ship: | 12 Days or more |
---|
TONE
Deep socket ideal for machine assembly, bicycle maintenance, etc.
[Features]
· Insertion angle: 9.5 mm.
· A socket ideal for hexagon bolt/nut tightening and loosening work.
· Hex subtense with good access to hexagon bolts and nuts.
· Demonstrates power in tightening nuts in deep areas and protruding bolts/nuts.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.
Days to Ship: | 8 Days or more |
---|
TONE
Industry's first crowfoot socket wrench with an oscillating mechanism.
[Features]
· 12.7 mm insertion angle.
· Swivel angle can be freely set to enable access to bolts/nuts that have been out of reach until now.
[Applications]
· Ideal for tightening/loosening of vehicle sensors and various pipework, such as for air conditioners and hydraulic machinery.
Days to Ship: | 8 Days or more |
---|
Socket Wrenches - Deep 6-Point, KTC Power Fit, Through-Hole Type, B2L/B3L/B4L
KYOTO TOOL
[Features]
· KTC unique Power Fit has been adopted.
· Since it is a through-hole type model, it is ideal for working with nuts and recessed parts where bolts protrude.
Days to Ship: | 8 Days or more |
---|
TONE
A socket ideal for hexagon bolt/nut tightening and loosening work.
[Features]
· Hex subtense with good access to hexagon bolts and nuts.
· Compact design that's convenient for work in narrow areas.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.
Days to Ship: | 8 Days or more |
---|
Long Hexagonal Socket for Impact Wrenches 4AH-L
TONE
A long hexagonal socket ideal for work in deep places. (12.7 insertion)
[Features]
· As it is a long type, it can be used to access hex socket bolts and set screws in deep and narrow places.
· Impact wrench and power tools with a design extremely resistant to impacts.
· Ideal for tightening and loosening hex socket set screws.
· Total length: 150 mm, long hexagonal socket.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.
Days to Ship: | Same day or more |
---|
Show Stock Products
Extension Bar EX30/305/306/307
TONE
Extension bar convenient for extension of sockets. (9.5 insertion)
[Features]
· For when operation with a handle is not easy, in a deep and narrow place or the like.
· Various extension sizes are required for work in deep and narrow areas.
· Sizes requested by our customers have been added for a rich lineup of 12 types from 32 to 1,000 mm.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.
Days to Ship: | 8 Days or more |
---|
Extension Bar EX40/320/321/407/420
TONE
Essential extension bar when you want to extend the socket. (12.7 insertion)
[Features]
· Ideal for when operation with a handle is not easy, in a deep and narrow place or the like.
· Various extension sizes are required for work in deep and narrow areas.
· Sizes requested by our customers have been added for a rich lineup of 11 types from 50 to 1,000 mm.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.
Days to Ship: | 8 Days or more |
---|
Extension Bar (Insertion Angle: 19.0 mm)
KOKEN YAMASHITA
[Features]
· Securely transmits torque.
Days to Ship: | 8 Days or more |
---|
Ratchet Handle (Holder Type) RH43K
TONE
12.7 mm insertion angle square ratchet handle.
[Features]
· Easy attaching and detaching of socket, and comes with socket holder unlikely to detach while working.
· Socket can be replaced with one-push operation.
[Applications]
Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.
Days to Ship: | 12 Days or more |
---|
TONE
A socket wrench that extends the 9.5 mm impact socket.
[Features]
· Impact wrench and power tools with a design extremely resistant to impacts.
· Electroless plating specification to improve its appearance, quality and rust-proofing.
· Used to extend a socket when operation with a wrench is not easy, in a deep and narrow place or the like.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.
Days to Ship: | 8 Days or more |
---|
TONE
An impact socket for tightening and loosening of hexagon bolts/nuts. (19.0 insertion)
[Features]
· Impact wrench and power tools with a design extremely resistant to impacts.
· Electroless plating specification to improve its appearance, quality and rust-proofing.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.
Days to Ship: | 8 Days or more |
---|
TONE
Hexagonal socket for hand tools with an insertion angle of 9.5 mm.
[Features]
· Hex socket ideal for tightening and loosening work.
· Various strength-enhancing alloy elements are blended.
· Complete heat treatment has been applied to raise alloy performance to the limit.
· The knurled outer periphery allows the bolt to be easily turned by hand.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.
Days to Ship: | 8 Days or more |
---|
Socket Wrench Options - Spinner Handle, General Purpose, BS/BSE/BSL
KYOTO TOOL
[Features]
· Strong and long design allows easier force application.
· Uses joint designed for easy handling without breakage.
· The head height is set low, and workability in narrow places is improved by adopting a new joint mechanism.
[Applications]
· General purpose tool
Days to Ship: | 8 Days or more |
---|
Hexagon Socket Set (with Holder) HH212
TONE
12-piece manual hex socket set ideal for tightening and loosening hex socket bolts and set screws.
[Features]
· The socket holder (aluminum type) that allows the socket to be easily removed improves work efficiency.
· A socket wrench with knurled outer periphery that allows the bolt to be easily turned by hand.
· Insertion angle: 6.35 mm.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.
Days to Ship: | 12 Days or more |
---|
TONE
Hex socket ideal for tightening and loosening hex socket bolts and hex socket set screws.
[Features]
· A hexagonal socket for manual work with a 6.35-mm insertion angle.
· Changed to a knurled type.
· The knurled outer periphery allows the bolt to be easily turned by hand.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.
Days to Ship: | 8 Days or more |
---|
Hozan
A full set including hex bits, sockets, ratchet handle, and extension bar.
[Features]
· Convenient carrying case included.
· Insertion angle: 6.3 mm square (1/4" sq), 9.5 mm square (3/8" sq).
· Case size: 260 x 150 x 35 mm.
· Weight: 1.4 kg.
[Applications]
· Ideal for deep locations as well if an extension bar and ratchet handle are combined.
Days to Ship: | 8 Days or more |
---|
Stainless Steel Extension Bar SEX40-075
TONE
Extension bar featuring durability and rust resistance.
[Features]
· 12.7 mm drive with 75 mm length.
· Material adopts precipitation hardened stainless steel.
· Stainless steel tool with emphasized strength, corrosion resistance, chemical resistance and hygiene.
[Applications]
· For food-related equipment, medical equipment, cleanrooms, precision machinery, ships, marine sports, marine development, etc.
· Ideal for places that use stainless steel bolts and nuts such as plants, waterproofing work, plumbing and cleaning equipment.
Days to Ship: | 12 Days or more |
---|
TONE
Hexagonal socket for hand tools with an insertion angle of 12.7 mm.
[Features]
· Various strength-enhancing alloy elements are blended.
· Complete heat treatment has been applied to raise alloy performance to the limit.
· The knurled outer periphery allows the bolt to be easily turned by hand.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.
Days to Ship: | 8 Days or more |
---|
Hex Socket Wrench Set (12.7 mm Insertion Angle)
ASAHIKINZOKU
[Features]
· A standard hexagon socket.
· Made from chrome vanadium steel.
[Applications]
· Tightening and loosening work for hex socket bolts and hex socket set screws.
Days to Ship: | 8 Days or more |
---|
Hex Socket (6.35 mm Insertion Angle)
MITOLOY
[Features]
· It is for a 6.35 mm insertion angle.
Days to Ship: | 8 Days or more |
---|
Socket Wrenches - 6-Point Socket, Chrome-Vanadium Steel, TS3-S/TS4-S
Trusco Nakayama
[Features]
· The bolt nut is not easily damaged even if intense stress is applied to the contact surface.
· Made from chrome vanadium steel.
Days to Ship: | 8 Days or more |
---|
Socket Wrenches - 6-Point, B2/B3/B4
KYOTO TOOL
[Features]
· A standard type which is of a compact design with a shorter overall length than conventional products, easy to work in narrow places.
· KTC unique Power Fit has been adopted to both aperture and drive.
Days to Ship: | 7 Days or more |
---|
KYOTO TOOL
[Features]
· The AMBAC system prevents pins from popping out during use.
· New type of ring also allows pins and rings to be easily installed.
Days to Ship: | 8 Days or more |
---|
SK 11
Joint that enables smooth rotation work from various angles.
[Features]
· Possible to work from any diagonal angle thanks to its omnidirectional 2-axis swivel.
[Applications]
· Joint that goes between the handle and socket for adding an angle for use in narrow spaces.
Days to Ship: | Same day |
---|
Show Stock Products
Socket for Anchor Bolts (12-Point) 8AD-L200
TONE
Anchor bolt fastening socket for architectural foundation work.
[Features]
· 25.4 mm drive, 200 mm total length.
· Socket for anchor bolts tightening, important in foundation work.
· Ideal for tightening work in deep places where sockets do not reach, or where the long threads of bolts protrude out.
[Applications]
· For construction work and for tightening anchor bolts.
Days to Ship: | 9 Days or more |
---|
TONE
Inch size socket wrench set with 19.0 mm insertion.
[Features]
· For manual operation.
· 13 sockets, 4 handles.
· A deluxe set of socket wrenches with built-in inch-size sockets in a metal case.
[Applications]
· Ideal for servicing large-scale machine made outside Japan, automobile servicing, civil engineering servicing, and plant servicing.
Days to Ship: | 12 Days or more |
---|
Extension Socket for Impact Wrenches 3AEX-L100
TONE
An impact socket for tightening and loosening of hexagon bolts/nuts.
[Features]
· For improving workability in production lines. It is ideal for tightening/loosening bolts and nuts located in deep or narrow places.
· It has been made lightweight by optimizing the diameter of the shaft according to the size.
· Total length: 100 mm.
[Applications]
· Ideal for assembly and maintenance of production lines, machines and maintenance of automobiles and motorcycles.
Days to Ship: | 8 Days or more |
---|
TONE
The overall length is long and has good access to thin and narrow places. Also convenient for fast turning work by turning the shaft part.
[Features]
· T-shaped handle type for powerful tightening.
· Socket wrench which is convenient for quick turning operation as well.
[Applications]
· T-wrench for tightening/loosening of bolts and nuts.
· Ideal for a wide range of maintenance work, such as maintenance of automobiles, motorcycles, bicycles, etc. and maintenance of industrial equipment.
Days to Ship: | 8 Days or more |
---|
Socket Wrench Set (12-Sided Type) 1215A
Lobtex
•Single Item / Set : Set Product
•Use : Manual Operation
•Socket Shape : 12 x 6
•Flat Width (Dimension S) : 10, 11, 12, 13, 14, 17, 19, 21, 22, 30, 32, 8, Distortion factor: 0.02% or less (500 Hz to 20 kHz), 0.05% or less (100 Hz - 100 kHz) (10x range for 100 Hz and 1x range for 100 kHz), 0.3% or less (50 Hz to 200 kHz), 0.5% or less (20 Hz - 500 kHz), 1.5% or less (10 Hz to 1 MHz), Output frequency range: 10 Hz to 1 MHz (5 ranges), Output waveforms: square wave and sine wave, Output amplitude: for sine wave, 5 Vrms or more (when load is 600 +¬)/for square wave, 10 Vpp or more (no load), Output frequency accuracy: dial accuracy -¦(3% + 1 Hz), (accuracy for dial 10 and 100 places), Output impedance: approx. 600 +¬, Attenuator: 0, -10, -20, -30, -40, -50 (dB) (when the following applies: six steps, accuracy -¦1 dB, and load 600 +¬), Start-up and shut down time/symmetry: 200 ns or less/-¦5% (when 1 kHz, at maximum output)
•Drive (For Electric Drill, Shaft Dimension) (Inches) : 1/2
For complete product overview and details on Socket Wrench Set (12-Sided Type) 1215A, see the sections below:
Days to Ship: | 9 Days or more |
---|
Lobtex
•Single Item / Set : Set Product
•Use : Manual Operation
•Socket Shape : Hexagonal
•Drive (For Electric Drill, Shaft Dimension) (Inches) : 1/4
For complete product overview and details on Socket Wrench Set (Hex) 610SA, see the sections below:
Days to Ship: | 8 Days or more |
---|
Socket Wrench Set (Hexagonal and 12-Sided Type)
Lobtex
•Use: Manual Operation
•Drive Electric Drill Shaft Dimension Mm: 9.5
•Drive Electric Drill Shaft Dimension Inch: 3/8
•Socket Shape: Hexagonal, Bihexagonal
•Flat Width Dimension S: 7
Days to Ship: | 8 Days or more |
---|
TONE
.A socket wrench for square drive that slides over the handle and can be adjusted to any position.
[Features]
· 6.35 mm insertion angle.
· A groove is processed on the handle so that the square drive does not turn when force is applied.
· Also, the stopper works when the square drive comes to the center.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.
Days to Ship: | 8 Days or more |
---|
TONE
Compact socket that is ideal for work in narrow places.
[Features]
· Insertion angle: 6.35 mm.
· Hex subtense with good access to hexagon bolts and nuts.
· Compact design that's convenient for work in narrow areas.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.
Days to Ship: | 8 Days or more |
---|
TONE
Attachment tool that connects sockets and handles of differing insertion angles.
[Features]
· Firmly connects sockets and handles of differing insertion angles.
· For manual operation.
· Concave 12.7 x Convex 9.5 mm.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.
Days to Ship: | 12 Days or more |
---|
Hozan
Abundant variation of socket wrenches to support precision work.
[Features]
· Dedicated foldable tool holder.
· A screwdriver-type handle and an extension bar are included.
· The sockets can also be stored in the tool holder for superior organization.
[Applications]
· A set consists of an array of sockets in 10 sizes ranging from 4 to 12 mm, which makes it also ideal as an on-board car tool set.
Days to Ship: | 10 Days or more |
---|
Hozan
Socket wrench set available in 6 sizes from 10 to 19 mm.
[Features]
· Convenient carrying case included.
· Insertion angle: 9.5 mm square (3/8" sq).
· Case size: 230 x 90 x 45 mm.
· Weight: 880 g.
[Applications]
· Ideal for deep locations as well if an extension bar and ratchet handle are combined.
Days to Ship: | 10 Days or more |
---|
TONE
A socket wrench that is ideal for tightening/loosening hexagonal bolts/nuts with a double-hex structure.
[Features]
· Double hexagonal subtense design which can easily access hex bolts and nuts.
· By minimizing subtense tolerance, rattling when inserting the bolt/nut has been decreased.
· Increases tightening efficiency, improves operability, and enables safe work.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.
Days to Ship: | 8 Days or more |
---|
Oscillating Extension Bar EX31
TONE
An extension bar used to extend a socket when operation with a handle is difficult in deep and narrow places.
[Features]
· Used to extend a socket when operation with a handle is not easy in a deep and narrow place or the like.
· Convex drive has been spherically machined, allowing it to be used even when tilted by 10°.
· 9.5 mm drive.
· In response to demand, more sizes have been added: now available in 5 types with overall length ranging from 32 to 400 mm.
[Applications]
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.
Days to Ship: | 8 Days or more |
---|
Oscillating Extension Bar EX21
TONE
A swiveling extension bar used to extend a socket when the handle is difficult to operate.
[Features]
· Convenient when working in deep and narrow places.
· Convex drive has been spherically machined, allowing it to be used even when tilted by 10°.
· Various extension sizes are required for work in deep and narrow areas.
· Three types are available, from 28 to 75 mm in total length.
[Applications]
· Ideal for assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.
Days to Ship: | 12 Days or more |
---|
TONE
Bar for extending the reach of impact sockets.
[Features]
· Connect between the wrench and socket to use for working in deep and narrow places.
· Impact wrench and power tools with a design extremely resistant to impacts.
· Electroless plating specification to improve its appearance, quality and rust-proofing.
[Applications]
· Ideal for assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.
Days to Ship: | 8 Days or more |
---|
TONE
A long socket for impact use intended to improve the outer appearance and rust-proofing.
[Features]
· A long type that can be used to access hex bolts in deep and narrow places.
· It exerts power in tightening/loosening protruded bolt nuts.
· Impact-resistant design.
· Electroless plating specification to improve its appearance, quality and rust-proofing.
[Applications]
· For tightening and loosening hex bolts and nuts.
· For impact wrenches and power tools.
· Assembly and maintenance of machinery, and maintenance of automobiles, motorcycles, and bicycles.
Days to Ship: | 8 Days or more |
---|
TONE
Used to extend a socket when operation with a handle is not easy in a deep and narrow place or the like.
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Single Item / Set |
Use |
Drive (For Electric Drill, Shaft Dimension) (mm) |
Socket Shape |
Flat Width (Dimension S) |
Drive (For Electric Drill, Shaft Dimension) (Inches) |
Total Length (L Size)(mm) |
Brand | TONE | TONE | TONE | TONE | TONE | KYOTO TOOL | TONE | TONE | TONE | TONE | KOKEN YAMASHITA | TONE | TONE | TONE | TONE | KYOTO TOOL | TONE | TONE | Hozan | TONE | TONE | ASAHIKINZOKU | MITOLOY | Trusco Nakayama | KYOTO TOOL | KYOTO TOOL | SK 11 | TONE | TONE | TONE | TONE | Lobtex | Lobtex | Lobtex | TONE | TONE | TONE | Hozan | Hozan | TONE | TONE | TONE | TONE | TONE | TONE |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Socket Wrenches - Deep 6-Point, KTC Power Fit, Through-Hole Type, B2L/B3L/B4L | Socket Wrench Options - Spinner Handle, General Purpose, BS/BSE/BSL | Socket Wrenches - 6-Point Socket, Chrome-Vanadium Steel, TS3-S/TS4-S | ||||||||||||||||||||||||||||||||||||||||||
Days to Ship | 12 Days or more | 8 Days or more | 12 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 12 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 12 Days or more | 8 Days or more | 8 Days or more | 12 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 7 Days or more | 8 Days or more |
Same day
Show Stock Products | 9 Days or more | 12 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 12 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 12 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Single Item / Set | Single Item Extension Bar | Single Item Extension Bar | Single Item Extension Bar | Single Item Socket | Single Item etc. | Single Item Socket | Single Item Socket | Single Item Socket | Single Item Extension Bar | Single Item Extension Bar | Single Item Extension Bar | Single Item Handle | Single Item Extension Bar | Single Item Socket | Single Item Socket | Single Item Handle | Set Product | Single Item Socket | Set Product | Single Item Extension Bar | Single Item Socket | Set Product | Single Item Socket | Single Item Socket | Single Item Socket | Single Item Extension Bar | Single Item Universal Joint | Single Item Socket | Set Product | Single Item Socket | Single Item Handle | Set Product | Set Product | Set Product | Single Item Handle | Single Item Socket | Single Item Adapter | Set Product | Set Product | Single Item Socket | Single Item Extension Bar | Single Item Extension Bar | Single Item Extension Bar | Single Item Socket | Single Item Extension Bar |
Use | Manual Operation | Manual Operation | Manual Operation | Manual Operation | Manual Operation | Manual Operation | Manual Operation | Impact | Manual Operation | Manual Operation | Manual Operation | Manual Operation | Impact | Impact | Manual Operation | Manual Operation | Manual Operation | Manual Operation | Manual Operation | Manual Operation | Manual Operation | Manual Operation | Manual Operation | Manual Operation | Manual Operation | Impact | Manual Operation Joint Type | Impact | Manual Operation | Impact | Manual Operation | Manual Operation | Manual Operation | Manual Operation | Manual Operation | Manual Operation | Manual Operation | Manual Operation | Manual Operation | Manual Operation | Manual Operation | Manual Operation | Impact | Impact | Manual Operation |
Drive (For Electric Drill, Shaft Dimension) (mm) | 9.5 | 9.5 | 12.7 | 9.5 | 12.7 | 6.3 ~ 12.7 | 9.5 | 12.7 | 9.5 | 12.7 | 19 | 12.7 | 9.5 | 19 | 9.5 | 6.3 ~ 19 | 6.35 | 6.35 | 6.3 ~ 9.5 | 12.7 | 12.7 | 12.7 | 6.35 | 9.5 ~ 12.7 | 6.3 ~ 12.7 | 9.5 ~ 25.4 | 6.35 | 25.4 | 19 | 9.5 | - | 12.7 | 6.35 | 9.5 | 6.35 | 6.35 | 12.7 | 6.3 | 9.5 | 12.7 | 9.5 | 6.35 | 12.7 | 12.7 | 25.4 |
Socket Shape | Joint Type | Joint Type | Joint Type | Hexagonal | Hexagonal | Hexagonal | Hexagonal | Hexagonal Bolt with Hexagonal Hole | Joint Type | Joint Type | Joint Type | - | Joint Type | Hexagonal | Hexagonal Bolt with Hexagonal Hole | - | Hexagonal Bolt with Hexagonal Hole | Hexagonal Bolt with Hexagonal Hole | Hexagonal | Joint Type | Hexagonal Bolt with Hexagonal Hole | Hexagonal Bolt with Hexagonal Hole | Hexagonal Bolt with Hexagonal Hole | Hexagonal | Hexagonal | Joint Type | - | - | - | Hexagonal | Hexagonal | - | Hexagonal | Hexagonal, Bihexagonal | - | Hexagonal | Joint Type | Hexagonal | Hexagonal | - | Joint Type | Joint Type | Joint Type | Hexagonal | Joint Type |
Flat Width (Dimension S) | 9.5 | 9.5 | - | 5.5 ~ 24 | 22 ~ 36 | 3.2 ~ 36 | 5.5 ~ 24 | 5 ~ 22 | 9.5 | 12.7 | 19 | - | 9.5 | 17 ~ 55 | 2.5 ~ 12 | - | 2 ~ 10 | 2 ~ 10 | 4 ~ 19 | - | 3 ~ 22 | 4 ~ 17 | 2.5 ~ 5 | 7 ~ 30 | 3.2 ~ 36 | 9.5 ~ 25.4 | - | 46 ~ 95 | 1-13/16 ~ 2 | 7 ~ 19 | 8 ~ 26 | 8 ~ 32 | 4.5 ~ 12 | 6 ~ 22 | - | 3 ~ 14 | 12.7 | 4 ~ 12 | 10 ~ 19 | 8 ~ 36 | 9.5 | 6.35 | 12.7 | 8 ~ 36 | - |
Drive (For Electric Drill, Shaft Dimension) (Inches) | 3/8 | 3/8 | 1/2 | 3/8 | 1/2 | - | 3/8 | 1/2 | 3/8 | 1/2 | - | 1/2 | 3/8 | 3/4 | 3/8 | - | 1/4 | 1/4 | 1/4 ~ 3/8 | 1/2 | 1/2 | - | - | - | - | - | 1/4 | 1 | 3/4 | 3/8 | - | 1/2 | 1/4 | 3/8 | 1/4 | 1/4 | 1/2 | 1/4 | 3/8 | 1/2 | 3/8 | 1/4 | 1/2 | 1/2 | 1 |
Total Length (L Size)(mm) | 150 | 75 | 150 | 54 ~ 64 | 84 ~ 105 | 50 ~ 100 | 26 ~ 34 | 150 | 32 ~ 1000 | 50 ~ 1000 | 75 ~ 400 | 255 | 75 ~ 250 | 50 ~ 65 | 40 ~ 63 | 150 ~ 1000 | - | 32 ~ 57 | - | 75 | 49 ~ 80 | - | 42 ~ 43 | 28 ~ 46 | 16 ~ 44 | 75 ~ 250 | - | - | - | 100 | 254 ~ 308 | - | - | - | 105 | 21 ~ 23.5 | 32 | - | - | 35 ~ 52 | 32 ~ 400 | 28 ~ 75 | 75 ~ 300 | 55 ~ 85 | 150 ~ 400 |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy