Lathe Jigs（Tip Carbide Insert (Y/N)：N/A）

• 

  Rolling Center NCF

  FUTAMURAKIKI

  •Feature: Angular bearings, thrust bearings, and needle bearings are used in this machine, providing smooth rotation torque. A-type, C-type, and E-type are thin models that are suitable for thread cutting and end face processing. A labyrinth mechani
  •Deflection of Center (Max.): TIR0.003

  • Volume Discount

  Days to Ship:	10 Days or more

• 

  Lathe Jigs - Rotating Tailstock Center, Umbrella-Shaped, LCU Series

  TAKURAKOGU

  [Features]
  · The diameter of the shank base was increased and can be removed using the forcing nut equipped on the tailstock

  • Volume Discount

  Days to Ship:	10 Days or more

• 

  Rolling Center NC70

  FUTAMURAKIKI

  •Feature: Designed with a focus on high precision (TIR 0.003). Ultra high speed rotation allows for the inclusion of a carbide tip on the grind-resistant end portion. (Type A) 2 types of bearings, angular bearings (3) and needle bearings, are assemb
  •Maximum Number Of Rotation (per minute): 7000
  •Deflection of Center (Max.): TIR0.003

  • Volume Discount

  Days to Ship:	11 Days or more

• 

  Rolling Center NCF-N

  FUTAMURAKIKI

  •Feature: The cold punched nut is attached to the rear portion of the main body, making it possible to remove it from the front portion of the tailstock. Combination angular bearings (3 pcs) and a needle bearing are used inside the main unit, making
  •Maximum Number Of Rotation (per minute): 5500
  •Deflection of Center (Max.): TIR0.003

  • Volume Discount

  Days to Ship:	10 Days or more

• 

  Rolling Center SR

  FUTAMURAKIKI

  •Type: With Seal
  •Feature: The elongation of the workpiece due to the processing heat generated during cutting is absorbed by the built-in disc spring provided in the center, so there is no distortion of the workpiece, which improves finishing accuracy. It is design
  •Deflection of Center (Max.): TIR0.010

  • Volume Discount

  Days to Ship:	10 Days or more

• 

  Rolling Center 100

  FUTAMURAKIKI

  •Feature: -17A is a thin type and is ideal for thread cutting and end face processing. This machine is designed with a small body diameter, and uses two needle bearings and three thrust bearings. Since the body head is within an angle of 60° from th
  •Deflection of Center (Max.): TIR0.005

  • Volume Discount

  Days to Ship:	10 Days or more

• 

  Rolling Center with 100 Seals

  FUTAMURAKIKI

  •Feature: -17A is a thin type and is ideal for thread cutting and end face processing. This machine is designed with a small body diameter, and uses two needle bearings and three thrust bearings. Since the body head is within an angle of 60° from th
  •Deflection of Center (Max.): TIR0.005

  • Volume Discount

  Days to Ship:	10 Days or more

• 

  Rolling Center HB

  FUTAMURAKIKI

  •Type: With Seal
  •Feature: Large bearings are used and the main unit outer diameter and sensor shaft diameter have been made thick in order to withstand larger loads than the standard type. Made to order products, φ80-1/10, φ80-1/20 (metric), φ100-1/20 (metric) can

  • Volume Discount

  Days to Ship:	11 Days or more

• 

  Rolling Center RST

  FUTAMURAKIKI

  •Dimension e (mm): -
  •Dimension B1 (mm): -
  •Feature: Heavy cutting, general cutting optimum product, maximum rotation speed (No. 3 to No. 5) 2,500 min - 1 Inside this machine, M.T No. 1 and No. 2 are 2 ball bearings and 1 thrust bearing. M. T No. 3 to No. 7 use one each of three kinds: taper

  • Volume Discount

  Days to Ship:	10 Days or more

• 

  Workpiece Driving Center DK Type Fixed Jaw

  FUTAMURAKIKI

  •Feature: Great for cog machining, spline machining, key groove machining, and woodworking. A chuck is not needed when using this machine. It is best to finish the workpiece at both centers in order to hold the workpiece. The workpiece can be easily

  • Volume Discount

  Days to Ship:	10 Days or more

• 

  Work Driving Center HD

  FUTAMURAKIKI

  •Feature: Specify rotation direction . The HD-15R / L and HD-21R / L have a common body / head. The HD-27R / L has the same main body.
  •Deflection of Center (Max.): TIR 0.01

  • Volume Discount

  Days to Ship:	10 Days or more

• 

  Workpiece Driving Center HD Type Replacement Jaw

  FUTAMURAKIKI

  •Feature: Workpiece driving center jaw should be replaced with spare before use if worn or damaged. To purchase a replacement jaw, check the direction of rotation (type) of the installed machine when placing your order.

  • Volume Discount

  Days to Ship:	11 Days or more

• 

  Umbrella-Shaped Rotation Center BRC

  FUTAMURAKIKI

  •θ: 80°
  •Type: With Seal
  •Feature: Used with a lathe or a cylindrical grinder. Can be used as a center push tool for machining pipe-shaped, ring-shaped, or thin objects. The inside of the main machine uses a tapered roller bearing, thrust bearing, and ball bearing, 1 each o

  • Volume Discount

  Days to Ship:	10 Days or more

• 

  Live Center A Type

  TAKURAKOGU

  [Features]
  · Fully quenched and polished, HRC 60-63.
  · The head drive mechanism, created from many years of experience, prevents the ingress of fine cutting powder and cutting fluid (bearing has long service life).
  · The rotation speed is up to 3,000 min-1 for MT-2, MT-3, and MT-4, 2,000 min-1 for MT-5, and 1,000 min-1 for MT-6.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  S Type Live Center (for High Speed)

  TAKURAKOGU

  [Features]
  · This rolling center is a live center which appropriately arranges ball bearing (mainly needle bearings) for a compact external shape with high load capacity, high rigidity and wide working range.
  · Components are designed to withstand rough use from high speed to low speed, processed with technologies from many years of tooling manufacturing for excellent compatibility and wear resistance.

  • Volume Discount

  Days to Ship:	9 Days or more

• 

  Rotating Center

  NSK

  [Features]
  · Since the run-out of center spindle tapered part is 5 µm or less, tapered roller bearings, thrust ball bearings, and needle bearings have been used.
  [Applications]
  · Workpiece support and runout prevention.

  • Volume Discount

  Days to Ship:	Same day or more

  Show Stock Products

• 

  Lathe Center

  Trusco Nakayama

  [Features]
  · It is all pure steel.
  [Applications]
  · Prevents runout of workpiece.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Lathe Jigs - Rotating Tailstock Center, Umbrella-Shaped, TLK Series

  Trusco Nakayama

  [Features]
  · With bearing.
  [Applications]
  · As a tool for centering holes at the pipe center.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  NAKANE Rotating Center, High-Speed Waterproof Type LF SP

  SANYOSEISAKUSYO

  •Tip Angle (°): 60
  •Runout accuracy (mm): 0.0025

  • Volume Discount

  Days to Ship:	11 Days or more

• 

  NAKANE Rotating Center, High-Speed Waterproof Type LF TP

  SANYOSEISAKUSYO

  •θ (°): 40
  •Tip Angle (°): 60
  •Runout accuracy (mm): 0.0025

  • Volume Discount

  Days to Ship:	11 Days or more

• 

  NAKANE Rotating Center, High-Speed Waterproof Type, LF, SP, with Cold Punched Nut

  SANYOSEISAKUSYO

  •Tip Angle (°): 60
  •Runout accuracy (mm): 0.0025

  • Volume Discount

  Days to Ship:	11 Days or more

• 

  NAKANE Rotating Center, High-Speed Waterproof Type, LF, TP, with Cold Punched Nut

  SANYOSEISAKUSYO

  •θ (°): 40
  •Tip Angle (°): 60
  •Runout accuracy (mm): 0.0025

  • Volume Discount

  Days to Ship:	11 Days or more

• 

  NAKANE Rotating Center, Light Torque, Waterproof Type FP SP

  SANYOSEISAKUSYO

  •Tip Angle (°): 60
  •Runout accuracy (mm): 0.003

  • Volume Discount

  Days to Ship:	11 Days or more

• 

  NAKANE Rotating Center, Light Torque, Waterproof Type FP TP

  SANYOSEISAKUSYO

  •θ (°): 40
  •Tip Angle (°): 60
  •Runout accuracy (mm): 0.003

  • Volume Discount

  Days to Ship:	11 Days or more

• 

  NAKANE Rotating Center, High-Speed Waterproof Type, FP, SP, with Cold Punched Nut

  SANYOSEISAKUSYO

  •Tip Angle (°): 60
  •Runout accuracy (mm): 0.003

  • Volume Discount

  Days to Ship:	11 Days or more

• 

  NAKANE Rotating Center, High-Speed Waterproof Type, FP, TP, with Cold Punched Nut

  SANYOSEISAKUSYO

  •θ (°): 40
  •Tip Angle (°): 60
  •Runout accuracy (mm): 0.003

  • Volume Discount

  Days to Ship:	11 Days or more

• 

  NAKANE Rotating Center, Standard Type LS

  SANYOSEISAKUSYO

  •Tip Angle (°): 60
  •Runout accuracy (mm): 0.003

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  NAKANE Rotating Center, Standard Type, Includes Oil Sheet LSP

  SANYOSEISAKUSYO

  •Tip Angle (°): 60
  •Runout accuracy (mm): 0.003

  • Volume Discount

  Days to Ship:	9 Days or more

• 

  NAKANE Rotating Center, Load Type M

  SANYOSEISAKUSYO

  •Tip Angle (°): 60
  •Runout accuracy (mm): 0.005

  • Volume Discount

  Days to Ship:	11 Days or more

• 

  NAKANE Rotating Center, Strong Type XP

  SANYOSEISAKUSYO

  •Tip Angle (°): 60
  •Runout accuracy (mm): 0.003

  • Volume Discount

  Days to Ship:	11 Days or more

• 

  NAKANE Rotating Center, Slide Back Type H

  SANYOSEISAKUSYO

  •α' (°): 40
  •Tip Angle (°): 60
  •Runout accuracy (mm): 0.003

  • Volume Discount

  Days to Ship:	10 Days or more

• 

  NAKANE Rotating Center, Bevel Type BS

  SANYOSEISAKUSYO

  •Runout accuracy (mm): 0.003
  For complete product overview and details on NAKANE Rotating Center, Bevel Type BS see the sections below:

  • Volume Discount

  Days to Ship:	10 Days or more

Loading...