(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Chamfering & V-Groove Tools（Work Material：Copper）
| Days to Ship |
|
|---|
-
Leading Drill, Carbide FX Coat, Long Shank FX-LS-LDS
OSG
Ideal for chamfering deep parts with a tip angle of 90°
- Volume Discount
Days to Ship: 8 Days or more -
XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type
MISUMI
[Features]
・Recommended for deep section chamfering of general steel.
・Ideal for chamfering and V-groove machining.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
・The long type is ideal for deep cavity milling.- Volume Discount
Days to Ship: 8 Days or more -
OSG
TiN coating enables higher speed and longer service life compared to NC-LDS
- Volume Discount
Days to Ship: 8 Days or more -
OSG
V coating enables longer service life compared to TIN-NC-LDS
- Volume Discount
Days to Ship: 8 Days or more -
OSG
Tip angles are available in 90° (45° chamfer), 120° and 130° (EX-Gold drill centering for inclined/curved surfaces).
- Volume Discount
Days to Ship: 8 Days or more -
CS3S Type III Chamfering Cutter (3-Flute), Straight Shank
OKAZAKI
3-flute type. For steel and stainless steel. All products are TiN coated.
- Volume Discount
Days to Ship: 8 Days or more -
TS Coated Carbide Chamfer, V Grooving End Mill, 2-Flute
MISUMI
Standard Chamfering and V Grooving Type [Note: When V groove machining, a flat surface is left on the core thickness portion]
- Volume Discount
- TS
- General Steel
- 2 Flutes
Days to Ship: 8 Days or more -
TS Coated Carbide Chamfer, V Grooving End Mill, 2-Flute/Long Shank Model
MISUMI
Ideal for the Deep Chamfering of Workpieces [Note: When V groove machining, a flat surface is left on the core thickness portion]
- Volume Discount
- TS
- General Steel
- 2 Flutes
Days to Ship: 8 Days or more -
TS Coated Carbide Chamfering End Mill, 2-Flute/15° Spiral
MISUMI
Capable of everything from positioning to chamfering with a single unit
- Volume Discount
- TS
- General Steel
- 2 Flutes
Days to Ship: 8 Days or more -
TS Coated Carbide Chamfering End Mill, 2-Flute/Short Model
MISUMI
Helix Chamfer Type of the Popular Product
- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Days to Ship: 8 Days or more -
TS Coated Carbide Chamfering End Mill, 3-Flute/Short Model
MISUMI
3-blade type of the popular helix chamfer that's capable of high feed
- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Days to Ship: 8 Days or more -
TS Coated Carbide Inner R-cutter, 2-Flute
MISUMI
Achieves the easy and high-quality processing of corner R. TS coated type that can be selected from 29 sizes
- Volume Discount
- Price Reduction
- TS
- General Steel
- 2 Flutes
Days to Ship: 8 Days or more -
Carbide Inner R-cutter, 2-Flute
MISUMI
Achieves the easy and high-quality processing of the corner R with the extensive 20 sizes
- Volume Discount
- Non-Coated
- General Steel
- 2 Flutes
Days to Ship: 8 Days or more -
TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute/No Side Blade
MISUMI
The helix blade suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.
- Volume Discount
- TS
- SUS
- 2 Flutes
Days to Ship: 8 Days or more -
Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral
MISUMI
Capable of everything from positioning to chamfering in a single shot
- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
Days to Ship: 8 Days or more -
Carbide Chamfering End Mill for Aluminum Machining, 2-Flute
MISUMI
The sharp helix blade achieves the clean machined surface with less burr
- Volume Discount
- Non-Coated
- Aluminum
- 2 Flutes
Days to Ship: 8 Days or more -
TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short
MISUMI
The chamfer angle can be selected from 60, 90 and 120° according to the machining style
- Volume Discount
- TiCN
- 2 Flutes
- S (Short)
Days to Ship: 8 Days or more -
High-Speed Steel Chamfering End Mill, 2-Flute/Short
MISUMI
Chamfering end mill with the angle that can be freely selected in 1° increments
- Non-Coated
- 2 Flutes
- S (Short)
Days to Ship: 10 Days or more -
XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type
MISUMI
[Features]
・Popular 3-flute type for helix angle chambering with high feed rate.
・Ideal for chamfering.(V-groove machining is not possible because there is no cutting edge at the tip)
・Since it has an outer peripheral flute, it can perform inclined contours and helical cutting.
・With the 3-flute shape, the feed can be increased up to 1.5 times that of the 2-flute type.
・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible.
・It can also be used as a deburring tool.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.- Volume Discount
Days to Ship: 8 Days or more -
XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type
MISUMI
[Features]
・Popular chamfering product with helix angle.
・Since it has a peripheral flute, it can be used for tilting, contouring and helical cutting.
・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible. It can also be used as a deburring tool.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.- Volume Discount
Days to Ship: 8 Days or more -
XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle
MISUMI
[Features]
・Machining from positioning to chamfering with a single tool.- Volume Discount
Days to Ship: 8 Days or more -
XAL Series Carbide Chamfer End Mill 2-Flute
MISUMI
[Features]
・Recommended for chamfering general steel.
・Ideal for chamfering and V-groove machining.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.- Volume Discount
Days to Ship: 8 Days or more -
XAL Series Carbide Inner Radius Cutter, 2-Flute
MISUMI
[Features]
・An essential item for corner rounding.- Volume Discount
Days to Ship: 8 Days or more -
Leading Drill, Carbide FX Coating FX-LDS
OSG
It can be used not only for chamfering, but also centering with high speed and long service life
- Volume Discount
Days to Ship: 8 Days or more -
2-Flute, Corner Rounding Type FX-ECR
OSG
Dedicated tool for R chamfering. High-toughness carbide alloy is used as base material, enabling use for a wide range of work materials.
- Volume Discount
Days to Ship: 8 Days or more -
2-Flute Spiral Chamfering Cutter FX-SCC
OSG
Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.
- Volume Discount
Days to Ship: 8 Days or more -
2-Flute Spiral Chamfering Cutter (for Copper and Aluminum Alloys) CA-SCC
OSG
Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.
- Volume Discount
Days to Ship: 8 Days or more -
2-Flute, Long Shank, Spiral Chamfering Cutter FX-LS-SCC
OSG
Long shank type to support machining deep parts. The use of helical teeth means that there is no chattering even with large protrusion.
- Volume Discount
Days to Ship: 8 Days or more -
2-Flute, Long Shank, Spiral Chamfering Cutter (for Copper and Aluminum Alloys) CA-LS-SCC
OSG
Long shank type to support machining deep parts. The use of helical teeth means that there is no chattering even with large protrusion.
- Volume Discount
Days to Ship: 8 Days or more -
Spiral Chamfering Cutter for SV Chamfering Process
UNION TOOL
•Single Blade/Double Blade: Single Blade
•Tool Material Type: Carbide
•Point Angle(θ): 90
•Half Angle of Taper A (°): 45- Volume Discount
Days to Ship: 9 Days or more -
VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter
OSG
Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.
- Volume Discount
Days to Ship: 8 Days or more -
VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-Speed Steel Long Shank
OSG
Ideal for chamfering deep parts with a tip angle of 90°
- Volume Discount
Days to Ship: 8 Days or more -
Carbide Solid Chamfering End Mill 3-Flute
DIXI
•Tool Material Type: Carbide
•Point Angle(θ): 90
•Coating Presence: Included
•Coating Type: TiAlN
•Shank Diameter Tolerance: h5- Volume Discount
Days to Ship: 10 Days or more -
Carbide Mini WR Chamfer Cutter
EIKOSHA
Back and front are rounded
For complete product overview and details on Carbide Mini WR Chamfer Cutter see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Carbide Mini WR Chamfer Cutter, Long
EIKOSHA
Back and front are rounded. Long handle
- Volume Discount
Days to Ship: 8 Days or more -
EIKOSHA
Chamfering 1-flute
For complete product overview and details on New Chamfering Cutter see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
IWATATOOL
Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.
- Volume Discount
Days to Ship: 8 Days or more -
Toglon Sharp SP 60° Carbide DLC Coating
IWATATOOL
Causes fewer burrs and less chattering and provides clean surface roughness. Enables chamfering of multiple diameters with a single unit. Finish is the same quality, brilliant surface roughness.
- Volume Discount
Days to Ship: 8 Days or more -
IWATATOOL
[Features]
· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
· Finish is the same quality, brilliant surface roughness.- Volume Discount
Days to Ship: 8 Days or more -
Toglon Sharp SP 90° Carbide DLC Coating
IWATATOOL
[Features]
· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
· Finish is the same quality, brilliant surface roughness.- Volume Discount
Days to Ship: 8 Days or more -
Toglon Sharp SP 90° Carbide Long Type
IWATATOOL
[Features]
· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
· Finish is the same quality, brilliant surface roughness.- Volume Discount
Days to Ship: 8 Days or more -
Toglon Sharp SP 90° Carbide Long Type DLC Coating
IWATATOOL
[Features]
· Causes fewer burrs and less chattering and provides clean surface roughness: Enables chamfering of multiple diameters with a single unit.
· Finish is the same quality, brilliant surface roughness.- Volume Discount
Days to Ship: 8 Days or more -
Angular Cutter with TAG Handle G2
ASAHI TOOLS
•Use: Chamfering / Horizontal
•Single Blade/Double Blade: Single Blade
•Peripheral Blade Availability: Included
•Tool Material Type: Carbide
•Coating Type: Non-Coated- Volume Discount
Days to Ship: 8 Days or more -
ASAHI TOOLS
•Single Blade/Double Blade: Single Blade
•Peripheral Blade Availability: Included
•Tool Material Type: Carbide
•Coating Type: Non-Coated
•Number Of Flutes (sheet): 2- Volume Discount
Days to Ship: 8 Days or more -
CS1S Type I Chamfering Cutter (Drilling Type), Straight Shank
OKAZAKI
A holed type. For non-ferrous metals. All products are TiN coated.
- Volume Discount
Days to Ship: 8 Days or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Use |
| Point Angle (θ) |
| Tool Diameter (D)(mm) |
| Work Material |
| Single Blade / Double Blade |
| Peripheral Blade Availability |
| Tool Material Type |
| Coating Presence |
| Coating Type |
| R Size ( R )(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | MISUMI | OSG | OSG | OSG | OKAZAKI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OSG | OSG | OSG | OSG | OSG | OSG | UNION TOOL | OSG | OSG | DIXI | EIKOSHA | EIKOSHA | EIKOSHA | IWATATOOL | IWATATOOL | IWATATOOL | IWATATOOL | IWATATOOL | IWATATOOL | ASAHI TOOLS | ASAHI TOOLS | OKAZAKI |
| Product Series | XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type | TS Coated Carbide Chamfer, V Grooving End Mill, 2-Flute/Long Shank Model | TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute/No Side Blade | Carbide Chamfering End Mill for Aluminum Machining, 2-Flute, 30° Spiral | TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short | XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle | 2-Flute Spiral Chamfering Cutter (for Copper and Aluminum Alloys) CA-SCC | 2-Flute, Long Shank, Spiral Chamfering Cutter (for Copper and Aluminum Alloys) CA-LS-SCC | VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-Speed Steel Long Shank | CS1S Type I Chamfering Cutter (Drilling Type), Straight Shank | |||||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||||
| Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||||
| Use | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | R Chamfer | R Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | - | Centering (Positioning) / Hole Chamfer | R Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Hole Chamfer / Chamfering / Horizontal / R Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | R Chamfer | R Chamfer | Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Chamfering / Horizontal | Hole Chamfer / Chamfering / Horizontal | Hole Chamfer |
| Point Angle (θ) | 90 | - | 60 ～ 120 | 90 | 90 ～ 130 | 90 | 60 ～ 120 | 90 | 90 | 60 ～ 120 | 90 | - | - | 90 | 90 | 90 | 60 ～ 120 | 60 ～ 160 | - | - | - | - | - | 90 | - | 90 | 90 | 90 | 90 | 90 | - | 90 | 90 | - | - | 60 | 60 | 60 | 90 | 90 | 90 | 90 | 45° ～ 60° | 60 ～ 90 | 90 |
| Tool Diameter (D)(mm) | 16 ～ 25 | - | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 20 | 3 ～ 16 | 3 ～ 12 | 3 ～ 12 | 3 ～ 12 | 3 ～ 12 | - | - | 3 ～ 12 | 3 ～ 12 | 3 ～ 12 | 10 ～ 25 | 10 ～ 25 | - | - | - | - | - | 16 ～ 25 | 0.5 ～ 1.5 | 0.8 ～ 1 | 0.8 ～ 1 | 0.8 ～ 1 | 0.8 ～ 1 | 0.8 ～ 1 | - | 3 ～ 25 | 2 ～ 12 | 3.8 ～ 13.4 | 6.8 ～ 15.4 | 6 | 1.2 ～ 16 | 2 ～ 16 | 1.2 ～ 16 | 1.2 ～ 16 | 3 ～ 12 | 3 ～ 12 | 15 ～ 100 | 10 ～ 60 | 30 |
| Work Material | Copper[○] | Copper[○] | Copper[◎] | Copper[◎] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[◎] | Copper[◎] | Copper[◎] | Copper[◎] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] | Copper[○] |
| Single Blade / Double Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | - | - | - | - | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade |
| Peripheral Blade Availability | None | Included | None | None | None | None | None | Included | None | Included | Included | None | None | None | None | None | Included | Included | Included | Included | None | None | None | None | None | None | None | None | None | None | None | Included | - | - | - | - | None | None | None | None | None | None | Included | Included | None |
| Tool Material Type | Carbide | Carbide | High-Speed Steel | Powdered High-Speed Steel | High-Speed Steel | Cobalt High-Speed Steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Powdered High-Speed Steel | Cobalt High-Speed Steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Powdered High-Speed Steel | Powdered High-Speed Steel | Carbide | Carbide | Carbide | High-Speed Steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Cobalt High-Speed Steel |
| Coating Presence | Included | Included | Included | Included | None | Included | Included | Included | Included | Included | Included | Included | None | Included | None | None | Included | Included / None | Included | Included | Included | Included | Included | Included | Included | Included | None | Included | None | None | Included | Included | Included | - | - | - | None | Included | None | Included | None | Included | None | None | Included |
| Coating Type | TiAlN | AlCrN | TiN | TiCN | Non-Coated | TiN | Ts | Ts | Ts | Ts | Ts | Ts | - | Ts | - | - | - | TiCN | AlCrN | AlCrN | AlCrN | AlCrN | AlCrN | TiAlN | TiAlN | TiAlN | Non-Coated | TiAlN | Non-Coated | - | TiCN | TiCN | TiAlN | - | - | - | - | DLC | - | DLC | - | DLC | Non-Coated | Non-Coated | TiN |
| R Size ( R )(mm) | - | - | - | - | - | - | - | - | - | - | - | 0.1 ～ 5 | 0.15 ～ 5 | - | - | - | - | - | - | - | - | - | - | - | 0.1 ～ 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Use
-
Metric / Inch
- metric
-
Point Angle (θ)
-
Tool Diameter (D)(mm)
- 0.1
- 0.2
- 0.3
- 0.4
- 0.5
- 0.6
- 0.7
- 0.8
- 0.9
- 1
- 1.2
- 1.5
- 1.6
- 1.8
- 2
- 2.4
- 2.5
- 2.6
- 2.8
- 3
- 3.2
- 3.4
- 3.5
- 3.6
- 3.8
- 4
- 4.2
- 4.4
- 4.5
- 4.6
- 4.8
- 5
- 5.2
- 5.4
- 5.5
- 5.6
- 5.8
- 6
- 6.2
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.2
- 7.4
- 7.5
- 7.6
- 7.8
- 8
- 8.2
- 8.4
- 8.8
- 9.4
- 10
- 10.4
- 10.8
- 11
- 11.4
- 12
- 12.4
- 13
- 13.4
- 14
- 14.4
- 15
- 15.4
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 25
- 30
- 32
- 35
- 40
- 45
- 50
- 55
- 60
- 65
- 66
- 70
- 75
- 80
- 90
- 100
-
Work Material
-
Single Blade / Double Blade
-
Peripheral Blade Availability
-
Tool Material Type
-
Coating Presence
-
Coating Type
-
R Size ( R )(mm)
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.5
- 0.55
- 0.6
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1.1
- 1.2
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
- 3
- 3.25
- 3.5
- 3.75
- 4
- 4.25
- 4.5
- 4.75
- 5
- 5.25
- 5.5
- 5.75
- 6
- 6.25
- 6.5
- 6.75
- 7
- 7.25
- 7.5
- 7.75
- 8
- 8.5
- 9
- 9.5
- 10
- 10.5
- 11
- 11.5
- 12
- 12.5
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
Narrow search by specifying Manufacturer
-
- OSG (12)
- EIKOSHA (6)
- IWATATOOL (6)
- OKAZAKI (3)
- ASAHI TOOLS (2)
- 7 LEADERS (1)
- DIJET (1)
- DIXI (1)
- KYOWASEIKO (1)
- UNION TOOL (1)
- DAISHOWASEIKI (0)
- MAPAL (0)
- STARM (0)
- FUJIGEN (0)
- FUKUDA (0)
- Poulten&Graf (0)
- NOGA JAPAN (0)
- S&K (0)
- GUHRING (0)
- TAIYO TOOL (0)
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy