(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
- Scheduled Maintenance Notice: This site will be unavailable due to scheduled maintenance from 7:00 p.m. 12/14/2024 to 4:00 p.m. (CST) 12/15/2024. We apologize for the inconvenience.
Chamfering & V-Groove Tools（Work Material：Stainless Steel）
| Days to Ship |
|
|---|
-
XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type
MISUMI
[Features]
・MISUMI's original inner radius cutter specialized for machining high hardness steel.
・Ideal for high hardness steel inner radius machining up to 65 HRC.
・High-efficiency machining is possible by adopting a 4-flute shape.
・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.
・The finish of the surface roughness of the workpiece after machining is very good.- Volume Discount
Days to Ship: 8 Days or more -
XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type
MISUMI
[Features]
・Recommended for deep section chamfering of general steel.
・Ideal for chamfering and V-groove machining.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
・The long type is ideal for deep cavity milling.- Volume Discount
Days to Ship: 8 Days or more -
OSG
TiN coating enables higher speed and longer service life compared to NC-LDS
- Volume Discount
Days to Ship: 8 Days or more -
OSG
V coating enables longer service life compared to TIN-NC-LDS
- Volume Discount
Days to Ship: 8 Days or more -
CS3S Type III Chamfering Cutter (3-Flute), Straight Shank
OKAZAKI
3-flute type. For steel and stainless steel. All products are TiN coated.
- Volume Discount
Days to Ship: 8 Days or more -
Carbide Chamfering Cutter KMC-2
KYOWASEIKO
Ideal for chamfering and V-groove machining.
- Volume Discount
Days to Ship: 8 Days or more -
TS Coated Carbide Chamfer, V Grooving End Mill, 2-Flute
MISUMI
Standard Chamfering and V Grooving Type [Note: When V groove machining, a flat surface is left on the core thickness portion]
- Volume Discount
- TS
- General Steel
- 2 Flutes
Days to Ship: 8 Days or more -
TS Coated Carbide Chamfer, V Grooving End Mill, 2-Flute/Long Shank Model
MISUMI
Ideal for the Deep Chamfering of Workpieces [Note: When V groove machining, a flat surface is left on the core thickness portion]
- Volume Discount
- TS
- General Steel
- 2 Flutes
Days to Ship: 8 Days or more -
TS Coated Carbide Chamfering End Mill, 2-Flute/15° Spiral
MISUMI
Capable of everything from positioning to chamfering with a single unit
- Volume Discount
- TS
- General Steel
- 2 Flutes
Days to Ship: 8 Days or more -
TS Coated Carbide Chamfering End Mill, 2-Flute/Short Model
MISUMI
Helix Chamfer Type of the Popular Product
- Volume Discount
- TS
- General Steel
- 2 Flutes
- S (Short)
Days to Ship: 8 Days or more -
TS Coated Carbide Chamfering End Mill, 3-Flute/Short Model
MISUMI
3-blade type of the popular helix chamfer that's capable of high feed
- Volume Discount
- TS
- General Steel
- 3 Flutes
- S (Short)
Days to Ship: 8 Days or more -
TS Coated Carbide Inner R-cutter, 2-Flute
MISUMI
Achieves the easy and high-quality processing of corner R. TS coated type that can be selected from 29 sizes
- Volume Discount
- Price Reduction
- TS
- General Steel
- 2 Flutes
Days to Ship: 8 Days or more -
Carbide Inner R-cutter, 2-Flute
MISUMI
Achieves the easy and high-quality processing of the corner R with the extensive 20 sizes
- Volume Discount
- Non-Coated
- General Steel
- 2 Flutes
Days to Ship: 8 Days or more -
TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute/No Side Blade
MISUMI
The helix blade suppresses the occurrence of burrs in chamfering difficult-to-cut SUS, etc.
- Volume Discount
- TS
- SUS
- 2 Flutes
Days to Ship: 8 Days or more -
TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short
MISUMI
The chamfer angle can be selected from 60, 90 and 120° according to the machining style
- Volume Discount
- TiCN
- 2 Flutes
- S (Short)
Days to Ship: 8 Days or more -
XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type
MISUMI
[Features]
・Popular 3-flute type for helix angle chambering with high feed rate.
・Ideal for chamfering.(V-groove machining is not possible because there is no cutting edge at the tip)
・Since it has an outer peripheral flute, it can perform inclined contours and helical cutting.
・With the 3-flute shape, the feed can be increased up to 1.5 times that of the 2-flute type.
・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible.
・It can also be used as a deburring tool.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.- Volume Discount
Days to Ship: 8 Days or more -
XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type
MISUMI
[Features]
・Popular chamfering product with helix angle.
・Since it has a peripheral flute, it can be used for tilting, contouring and helical cutting.
・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible. It can also be used as a deburring tool.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.- Volume Discount
Days to Ship: 8 Days or more -
XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle
MISUMI
[Features]
・Machining from positioning to chamfering with a single tool.- Volume Discount
Days to Ship: 8 Days or more -
XAL Series Carbide Chamfer End Mill 2-Flute
MISUMI
[Features]
・Recommended for chamfering general steel.
・Ideal for chamfering and V-groove machining.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.- Volume Discount
Days to Ship: 8 Days or more -
XAL Series Carbide Inner Radius Cutter, 2-Flute
MISUMI
[Features]
・An essential item for corner rounding.- Volume Discount
Days to Ship: 8 Days or more -
XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type
MISUMI
[Features]
・The popular high hardness steel chamfer end mill is even more affordable.
・Ideal for chamfering high hardness steel up to 65 HRC. (V-groove machining is not possible because there is no cutting edge at the tip)
・High-efficiency machining is possible by adopting a 6-flute shape.
・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.
・The finish of the surface roughness of the workpiece after machining is very good.- Volume Discount
Days to Ship: 8 Days or more -
2-Flute, Corner Rounding Type FX-ECR
OSG
Dedicated tool for R chamfering. High-toughness carbide alloy is used as base material, enabling use for a wide range of work materials.
- Volume Discount
Days to Ship: 8 Days or more -
3-Flute Chamfering Cutter (Negative Type) HSCT-N
OSG
It is a negative type.
For complete product overview and details on 3-Flute Chamfering Cutter (Negative Type) HSCT-N see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
3-Flute Chamfering Cutter (Positive Type) HSCT-P
OSG
Positive type.
For complete product overview and details on 3-Flute Chamfering Cutter (Positive Type) HSCT-P see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
3-Flute, Long Shank, Chamfering Cutter (Negative Type) LS-HSCT-N
OSG
It is a negative type.
For complete product overview and details on 3-Flute, Long Shank, Chamfering Cutter (Negative Type) LS-HSCT-N see the sections below:- Volume Discount
Days to Ship: 9 Days or more -
3-Flute, Long Shank, Chamfering Cutter (Positive Type) LS-HSCT-P
OSG
Positive type.
For complete product overview and details on 3-Flute, Long Shank, Chamfering Cutter (Positive Type) LS-HSCT-P see the sections below:- Volume Discount
Days to Ship: 9 Days or more -
Spiral Chamfering Cutter for SV Chamfering Process
UNION TOOL
•Single Blade/Double Blade: Single Blade
•Tool Material Type: Carbide
•Point Angle(θ): 90
•Half Angle of Taper A (°): 45- Volume Discount
Days to Ship: 9 Days or more -
VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter
OSG
Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.
- Volume Discount
Days to Ship: 8 Days or more -
VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-Speed Steel Long Shank
OSG
Ideal for chamfering deep parts with a tip angle of 90°
- Volume Discount
Days to Ship: 8 Days or more -
Carbide Solid Chamfering End Mill 3-Flute
DIXI
•Tool Material Type: Carbide
•Point Angle(θ): 90
•Coating Presence: Included
•Coating Type: TiAlN
•Shank Diameter Tolerance: h5- Volume Discount
Days to Ship: 10 Days or more -
SAGCCC SA Coated Carbide for Center Chamfering
S&K
Center chamfering cutter with TiAlN coating. Double angle adopted for the chamfer part.
- Volume Discount
Days to Ship: 10 Days or more -
GCCC for Carbide Center Chamfering
S&K
[Features]
· Melding the design concepts of endmills and drills, it is available for a wide range of applications.
· Double angle adopted for the chamfer part.
· Provides a clean finish with fewer burrs.- Volume Discount
Days to Ship: 8 Days or more -
Angular Cutter with TAG Handle G2
ASAHI TOOLS
•Use: Chamfering / Horizontal
•Single Blade/Double Blade: Single Blade
•Peripheral Blade Availability: Included
•Tool Material Type: Carbide
•Coating Type: Non-Coated- Volume Discount
Days to Ship: 8 Days or more -
ASAHI TOOLS
•Single Blade/Double Blade: Single Blade
•Peripheral Blade Availability: Included
•Tool Material Type: Carbide
•Coating Type: Non-Coated
•Number Of Flutes (sheet): 2- Volume Discount
Days to Ship: 8 Days or more -
CS2S Type II Chamfering Cutter (Single Flute), Straight Shank
OKAZAKI
1-flute type. For steel and stainless steel. All products are TiN coated.
- Volume Discount
Days to Ship: 8 Days or more -
SVM Chamfering Mill, Non-Coated
OKAZAKI
In addition to hole chamfering, it can be used for transverse feed cutting such as V-groove machining and C-surface machining.
- Volume Discount
Days to Ship: 10 Days or more -
SVMA Chamfering Mill, OK Coated
OKAZAKI
In addition to hole chamfering, it can be used for transverse feed cutting such as V-groove machining and C-surface machining.
- Volume Discount
Days to Ship: 10 Days or more -
Carbide Inversed Chamfering Cutter KUMC-4
KYOWASEIKO
4 straight flutes. 45° (Single Angle Type)
- Volume Discount
Days to Ship: 10 Days or more -
Carbide Inversed Chamfering Cutter KUMW-4
KYOWASEIKO
4 straight flutes. 90° (Double Angle Type)
- Volume Discount
Days to Ship: 10 Days or more -
Poulten&Graf
•Single Blade/Double Blade: Double Blade
•Peripheral Blade Availability: Included
•Point Angle(θ): 90
•Coating Presence: Included
•Coating Type: Others- Volume Discount
Days to Ship: 10 Days or more -
Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X
7 LEADERS
•Tool Material Type: Carbide
•Point Angle(θ): 90
•Coating Presence: Included
•Coating Type: Others
•Material: MG- Volume Discount
Days to Ship: 8 Days or more -
Blade for Chamfer/Deburring【1-10 Pieces Per Package】
NOGA JAPAN
•Use: Others
For complete product overview and details on Blade for Chamfer/Deburring see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N
OSG
[Features]
・ Unique 3-flute specification suppresses chattering during machining and realizes high efficiency and high feed machining
・ 40° twist and wide gullet combine sharpness and finished surface are achieved at a high level.
・ The return and burr are drastically reduced
・ Excellent cutting chip discharge- Volume Discount
Days to Ship: 8 Days or more
| Brand |
|---|
| Product Series |
| CAD |
| Days to Ship |
| Specifications |
| Use |
| Point Angle (θ) |
| Tool Diameter (D)(mm) |
| Work Material |
| Single Blade / Double Blade |
| Peripheral Blade Availability |
| Tool Material Type |
| Coating Presence |
| Coating Type |
| R Size ( R )(mm) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | MISUMI | OSG | OSG | OKAZAKI | KYOWASEIKO | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OSG | OSG | OSG | OSG | OSG | UNION TOOL | OSG | OSG | DIXI | S&K | S&K | ASAHI TOOLS | ASAHI TOOLS | OKAZAKI | OKAZAKI | OKAZAKI | KYOWASEIKO | KYOWASEIKO | Poulten&Graf | 7 LEADERS | NOGA JAPAN | OSG |
| Product Series | XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type | XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type | TS Coated Carbide Chamfer, V Grooving End Mill, 2-Flute/Long Shank Model | TS Coated Carbide Chamfering End Mill for Stainless Steel Machining, 2-Flute/No Side Blade | TiCN Coated Powdered High-Speed Steel Chamfering End Mill, 2-Flute, Short | XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle | XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type | 3-Flute, Long Shank, Chamfering Cutter (Negative Type) LS-HSCT-N | 3-Flute, Long Shank, Chamfering Cutter (Positive Type) LS-HSCT-P | VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-Speed Steel Long Shank | CS2S Type II Chamfering Cutter (Single Flute), Straight Shank | ||||||||||||||||||||||||||||||||
| CAD |
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||
| Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
| Specifications |
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||||
| Use | R Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Hole Chamfer | Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | R Chamfer | R Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | - | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | R Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Hole Chamfer / Chamfering / Horizontal / R Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Chamfering / Horizontal | Hole Chamfer / Chamfering / Horizontal | Hole Chamfer | Hole Chamfer / Chamfering / Horizontal / V Groove | Hole Chamfer / Chamfering / Horizontal / V Groove | Chamfering / Horizontal | Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Others | Chamfering / Horizontal |
| Point Angle (θ) | - | - | 60 ～ 120 | 90 | 90 | 90° | 60 ～ 120 | 90 | 90 | 60 ～ 120 | 90 | - | - | 90 | 60 ～ 120 | - | - | - | - | - | - | - | 90 ～ 90°$90° | 90 | 90 | 90 | 90 | - | 90 | 90 | - | - | 45° ～ 60° | 60 ～ 90 | 90 | 90 ～ 120 | 90 ～ 120 | - | - | 90 | 90 | - | 90° |
| Tool Diameter (D)(mm) | - | - | 3 ～ 25 | 3 ～ 25 | 20 | 0.3 ～ 4 | 3 ～ 16 | 3 ～ 12 | 3 ～ 12 | 3 ～ 12 | 3 ～ 12 | - | - | 3 ～ 12 | 10 ～ 25 | - | - | - | - | - | - | 0.5 ～ 1.5 | 1 ～ 2 | 1 ～ 2 | 1 ～ 2 | 1 ～ 2 | 0.8 ～ 1 | - | 3 ～ 25 | 2 ～ 12 | 3 ～ 20 | 3 ～ 20 | 15 ～ 100 | 10 ～ 60 | 66 | 3 ～ 20 | 3 ～ 20 | - | - | 3 ～ 20 | 0.5 ～ 20 | - | - |
| Work Material | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[◎] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] |
| Single Blade / Double Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | - | - | - | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Double Blade | - | - | Single Blade |
| Peripheral Blade Availability | None | Included | None | None | None | - | None | Included | None | Included | Included | None | None | None | Included | Included | Included | None | None | None | None | None | None | None | None | None | None | None | Included | - | Included | Included | Included | Included | None | Included | Included | - | - | Included | - | - | None |
| Tool Material Type | Carbide | Carbide | High-Speed Steel | Powdered High-Speed Steel | Cobalt High-Speed Steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Powdered High-Speed Steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Powdered High-Speed Steel | Powdered High-Speed Steel | Carbide | Carbide | Carbide | Carbide | Carbide | Cobalt High-Speed Steel | Carbide | Carbide | Carbide | Carbide | - | Carbide | High-Speed Steel / Cobalt High-Speed Steel | Carbide |
| Coating Presence | Included | Included | Included | Included | Included | None | Included | Included | Included | Included | Included | Included | None | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included / None | None | None | None | None | Included | Included | Included | Included | None | None | None | Included | None | Included | None | None | Included | Included | - | Included |
| Coating Type | AlCrN | AlCrN | TiN | TiCN | TiN | - | Ts | Ts | Ts | Ts | Ts | Ts | - | Ts | - | AlCrN | AlCrN | AlCrN | AlCrN | AlCrN | Ts | TiAlN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | - | TiCN | TiCN | TiAlN | TiAlN | Non-Coated | Non-Coated | Non-Coated | TiN | Non-Coated | TiAlN | - | - | Others | Others | - | - |
| R Size ( R )(mm) | - | - | - | - | - | - | - | - | - | - | - | 0.1 ～ 5 | 0.15 ～ 5 | - | - | - | - | - | - | - | - | 0.1 ～ 2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Use
-
Metric / Inch
- metric
-
Point Angle (θ)
-
Tool Diameter (D)(mm)
- 0.1
- 0.2
- 0.3
- 0.4
- 0.5
- 0.6
- 0.7
- 0.8
- 0.9
- 1
- 1.2
- 1.5
- 1.6
- 1.8
- 2
- 2.4
- 2.5
- 2.6
- 2.8
- 3
- 3.2
- 3.4
- 3.5
- 3.6
- 3.8
- 4
- 4.2
- 4.4
- 4.5
- 4.6
- 4.8
- 5
- 5.2
- 5.4
- 5.5
- 5.6
- 5.8
- 6
- 6.2
- 6.4
- 6.5
- 6.6
- 6.8
- 7
- 7.2
- 7.4
- 7.5
- 7.6
- 7.8
- 8
- 8.2
- 8.4
- 8.8
- 9.4
- 10
- 10.4
- 10.8
- 11
- 11.4
- 12
- 12.4
- 13
- 13.4
- 14
- 14.4
- 15
- 15.4
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 25
- 30
- 32
- 35
- 40
- 45
- 50
- 55
- 60
- 65
- 66
- 70
- 75
- 80
- 90
- 100
-
Work Material
-
Single Blade / Double Blade
-
Peripheral Blade Availability
-
Tool Material Type
-
Coating Presence
-
Coating Type
-
R Size ( R )(mm)
- 0.1
- 0.15
- 0.2
- 0.25
- 0.3
- 0.35
- 0.4
- 0.5
- 0.55
- 0.6
- 0.7
- 0.75
- 0.8
- 0.85
- 0.9
- 0.95
- 1
- 1.1
- 1.2
- 1.25
- 1.3
- 1.4
- 1.5
- 1.6
- 1.7
- 1.75
- 1.8
- 1.9
- 2
- 2.1
- 2.2
- 2.25
- 2.3
- 2.4
- 2.5
- 2.6
- 2.7
- 2.75
- 2.8
- 2.9
- 3
- 3.25
- 3.5
- 3.75
- 4
- 4.25
- 4.5
- 4.75
- 5
- 5.25
- 5.5
- 5.75
- 6
- 6.25
- 6.5
- 6.75
- 7
- 7.25
- 7.5
- 7.75
- 8
- 8.5
- 9
- 9.5
- 10
- 10.5
- 11
- 11.5
- 12
- 12.5
- 13
- 13.5
- 14
- 14.5
- 15
- 15.5
- 16
- 16.5
- 17
- 17.5
- 18
- 18.5
- 19
- 19.5
- 20
- 20.5
- 21
- 21.5
- 22
- 22.5
- 23
- 23.5
- 24
- 24.5
- 25
- 25.5
- 26
- 26.5
- 27
- 27.5
- 28
- 28.5
- 29
- 29.5
- 30
Narrow search by specifying Manufacturer
-
- OSG (10)
- OKAZAKI (4)
- KYOWASEIKO (3)
- ASAHI TOOLS (2)
- S&K (2)
- 7 LEADERS (1)
- DIXI (1)
- NOGA JAPAN (1)
- Poulten&Graf (1)
- UNION TOOL (1)
- DAISHOWASEIKI (0)
- MAPAL (0)
- STARM (0)
- FUJIGEN (0)
- FUKUDA (0)
- DIJET (0)
- EIKOSHA (0)
- GUHRING (0)
- IWATATOOL (0)
- TAIYO TOOL (0)
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy