(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
FUJIGEN
Tip materials are cermet / K10 class carbide / M20 class carbide / micro grain carbide / HSS.
Days to Ship: | 8 Days or more |
---|
XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type
MISUMI
[Features]
・MISUMI's original inner radius cutter specialized for machining high hardness steel.
・Ideal for high hardness steel inner radius machining up to 65 HRC.
・High-efficiency machining is possible by adopting a 4-flute shape.
・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.
・The finish of the surface roughness of the workpiece after machining is very good.
Days to Ship: | 8 Days or more |
---|
XAL Series Carbide Chamfer End Mill, 3-Flute / Short Type
MISUMI
[Features]
・Popular 3-flute type for helix angle chambering with high feed rate.
・Ideal for chamfering.(V-groove machining is not possible because there is no cutting edge at the tip)
・Since it has an outer peripheral flute, it can perform inclined contours and helical cutting.
・With the 3-flute shape, the feed can be increased up to 1.5 times that of the 2-flute type.
・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible.
・It can also be used as a deburring tool.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
Days to Ship: | 8 Days or more |
---|
XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type
MISUMI
[Features]
・Popular chamfering product with helix angle.
・Since it has a peripheral flute, it can be used for tilting, contouring and helical cutting.
・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible. It can also be used as a deburring tool.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
Days to Ship: | 8 Days or more |
---|
XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle
MISUMI
[Features]
・Machining from positioning to chamfering with a single tool.
Days to Ship: | 8 Days or more |
---|
XAL Series Carbide Chamfer End Mill 2-Flute
MISUMI
[Features]
・Recommended for chamfering general steel.
・Ideal for chamfering and V-groove machining.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
Days to Ship: | 8 Days or more |
---|
XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type
MISUMI
[Features]
・Recommended for deep section chamfering of general steel.
・Ideal for chamfering and V-groove machining.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
・The long type is ideal for deep cavity milling.
Days to Ship: | 8 Days or more |
---|
XAL Series Carbide Inner Radius Cutter, 2-Flute
MISUMI
[Features]
・An essential item for corner rounding.
Days to Ship: | 8 Days or more |
---|
Tips for Chibieco and Chibieco 2 TXMT080206
FUJIGEN
Tip material is micro grain carbide.
Days to Ship: | 8 Days or more |
---|
Days to Ship: | 8 Days or more |
---|
Days to Ship: | 8 Days or more |
---|
Days to Ship: | 8 Days or more |
---|
Tip for Chamfering Cutter / RC End Cutter / Baitender TT32GUR
FUJIGEN
Tip materials are cermet / K10 class carbide / M20 class carbide / micro grain carbide / HSS.
Days to Ship: | 8 Days or more |
---|
FUJIGEN
Tip materials are M20 class carbide / micro grain carbide.
Days to Ship: | 8 Days or more |
---|
FUJIGEN
Tip materials are K10 class carbide / M20 class carbide / micro grain carbide.
Days to Ship: | 8 Days or more |
---|
FUJIGEN
Tip materials are M20 class carbide / micro grain carbide.
Days to Ship: | 8 Days or more |
---|
FUJIGEN
Tip materials are cermet / K10 class carbide / M20 class carbide / micro grain carbide.
Days to Ship: | 12 Days or more |
---|
Aero Mill (Positive Type) / Kame Cutter / Tip for Nice Corner F3
FUJIGEN
Tip materials are cermet / K10 class carbide / M20 class carbide / micro grain carbide.
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Use |
Point Angle (θ) |
Tool Diameter (D)(mm) |
Work Material |
Single Blade / Double Blade |
Peripheral Blade Availability |
Tool Material Type |
Coating Presence |
Coating Type |
R Size ( R )(mm) |
Brand | FUJIGEN | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | XCP Series Carbide Inner Radius Cutter for High Hardness Steel Machining / 4-Flute / Short Type | XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle | XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type | Tip for Chamfering Cutter / RC End Cutter / Baitender TT32GUR | Aero Mill (Positive Type) / Kame Cutter / Tip for Nice Corner F3 | |||||||||||||
CAD |
|
|
|
|
|
|
| |||||||||||
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 12 Days or more | 8 Days or more |
Use | Centering (Positioning) / Chamfering / Horizontal | R Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | - | Centering (Positioning) / Chamfering / Horizontal | Centering (Positioning) / Chamfering / Horizontal | Centering (Positioning) / Chamfering / Horizontal | Centering (Positioning) / Chamfering / Horizontal | Chamfering / Horizontal / R Chamfer | Chamfering / Horizontal | Chamfering / Horizontal | Chamfering / Horizontal | Chamfering / Horizontal / R Chamfer | Chamfering / Horizontal |
Point Angle (θ) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tool Diameter (D)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Work Material | General Steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] | Stainless Steel[○] | Stainless Steel[○] |
Single Blade / Double Blade | - | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | - | - | - | - | - | - | - | - | - | - |
Peripheral Blade Availability | - | None | Included | Included | None | None | Included | None | - | - | - | - | - | - | - | - | - | - |
Tool Material Type | - | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | - | - | - | - | - | - | - | - | - | - |
Coating Presence | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included |
Coating Type | AlCrN | AlCrN | AlCrN | AlCrN | AlCrN | AlCrN | AlCrN | AlCrN | AlCrN | AlCrN | AlCrN | AlCrN | AlCrN | AlCrN | AlCrN | AlCrN | AlCrN | AlCrN |
R Size ( R )(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy