(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
NINE9
•Single Blade/Double Blade: Single Blade
•Tool Material Type: Carbide
•Coating Presence: Included
•Product Type: Insert
•Number Contained In A Packet: 5
Days to Ship: | 8 Days or more |
---|
TiAlN Coated Carbide Center Drill, 60° Chamfering Model/Regular, Long
MISUMI
Carbide center drill ideal for centering during mass production drilling
Days to Ship: | 8 Days or more |
---|
NINE9
•Single Blade/Double Blade: Single Blade
•Tool Material Type: Carbide
•Coating Presence: Included
•Product Type: Insert
•Dimension T (mm): 2
Days to Ship: | 8 Days or more |
---|
FUJIGEN
Tip materials are cermet / K10 class carbide / M20 class carbide / micro grain carbide / HSS.
Days to Ship: | 8 Days or more |
---|
3 mm Shank for Pointing Drill Tip 120° Steel (TiAlN Coated)
ATOM
Drill dedicated for guide holes for micro-diameter machining. Ideal for machining where it is difficult to ensure the hole position and hole diameter precision. Improved wear resistance and long product life with TiAlN coating. Added small diameter sizes from φ0.03 to φ0.3 in 0.01 mm increments
Days to Ship: | 8 Days or more |
---|
Milling Cutter for 90° Chamfering Type N 6713
GUHRING
Taper half-angle 45° chamfering milling cutter.
Days to Ship: | 8 Days or more |
---|
Carbide Point Drill PE-90° C-PE-Q-V
YAMAWA
The 2 angles, 125° tip angle and 90° chamfer angle, make it possible to simultaneously perform centering and chamfering. The two-tier planar shape provides excellent biting to achieve high machining accuracy.
Days to Ship: | 8 Days or more |
---|
TiAlN Coated High-Speed Steel Center Drill, 90° Chamfering Model
MISUMI
90° version is capable of simultaneous chamfering
Days to Ship: | 8 Days or more |
---|
Leading Drill, Carbide FX Coat, Long Shank FX-LS-LDS
OSG
Ideal for chamfering deep parts with a tip angle of 90°
Days to Ship: | 8 Days or more |
---|
Leading Drill, Carbide FX Coating FX-LDS
OSG
It can be used not only for chamfering, but also centering with high speed and long service life
Days to Ship: | 8 Days or more |
---|
Back Seat Mini Chamfer (Dovetail 45° Blade)
NOGA JAPAN
•Point Angle(θ): 45
•Coating Type: TiAlN
Days to Ship: | 8 Days or more |
---|
Chamfering Cutter NC Spot Drill (Chip)
NINE9
•Point Angle(θ): 145+90
•Coating Presence: Included
•Coating Type: TiAlN
•Number Contained In A Packet: 5
•Nose R (mm): 0.8
Days to Ship: | 9 Days or more |
---|
TiAlN Coated Carbide NC Spot Drill, Small Diameter, Multi-Functional Model
MISUMI
A single, highly efficient tool that's capable of centering, chamfering, and V grooving (Note: V grooving will leave a flat surface the thickness of the core. Ensure that you take core thickness into account)
Days to Ship: | 8 Days or more |
---|
TiAlN Coated Carbide NC Spot Drill, Regular/Long Shack
MISUMI
Carbide spot drill that helps increase chamfering efficiency
Days to Ship: | 8 Days or more |
---|
TiAlN Coated Carbide Center Drill, 90° Chamfering Model
MISUMI
Carbide center drill ideal for centering during mass production drilling
Days to Ship: | 8 Days or more |
---|
TiAlN Coated Carbide Countersink, 3-Flute/90°, Regular, Long Shack
MISUMI
Carbide countersink essential in chamfering and deburring
Days to Ship: | 8 Days or more |
---|
TiAlN Coated High-Speed Steel NC Spot Drill, Multi-Functional Model
MISUMI
A single, highly efficient tool that's capable of centering, chamfering, and V grooving (Note: V grooving will leave a flat surface the thickness of the core. Ensure that you take core thickness into account)
Days to Ship: | 8 Days or more |
---|
TiAlN Coated High-Speed Steel NC Spot Drill, Regular, Long Shack
MISUMI
TiAlN coated version of the popular spot drill
Days to Ship: | 8 Days or more |
---|
TiAlN Coated High-Speed Steel Center Drill, Regular Model
MISUMI
TiAlN-coated version of the popular center drill
Days to Ship: | 8 Days or more |
---|
TiAlN Coated High-Speed Steel Center Drill, Long Model
MISUMI
TiAlN coating offers excellent wear resistance , extending service life and enabling high-speed cutting.
Days to Ship: | 8 Days or more |
---|
TiAlN Coated High-Speed Steel Center Drill, R Model
MISUMI
R-shaped version is ideal for precision machining
Days to Ship: | 8 Days or more |
---|
TiAlN Coated High-Speed Steel Countersink, 3-Flute/90°, Regular, Long Shack Model
MISUMI
Ideal for hole chamfering countersunk bolts with 90° chamfer.
Days to Ship: | 8 Days or more |
---|
TiAlN Coated High-Speed Steel Countersink, 1-Flute/90°
MISUMI
1-flute type with high countersink versatility
Days to Ship: | 8 Days or more |
---|
TiAlN Coated High-Speed Steel Countersink, with Holes/90°
MISUMI
Effective for hole chamfering and deburring of light metals.
Days to Ship: | 8 Days or more |
---|
2-Flute, Corner Rounding Type FX-ECR
OSG
Dedicated tool for R chamfering. High-toughness carbide alloy is used as base material, enabling use for a wide range of work materials.
Days to Ship: | 8 Days or more |
---|
2-Flute Spiral Chamfering Cutter FX-SCC
OSG
Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.
Days to Ship: | 8 Days or more |
---|
2-Flute, Long Shank, Spiral Chamfering Cutter FX-LS-SCC
OSG
Long shank type to support machining deep parts. The use of helical teeth means that there is no chattering even with large protrusion.
Days to Ship: | 8 Days or more |
---|
MUGEN-COATING 2-Flute Inner Radius Cutter MIR200
NS TOOL
•Use: R Chamfer
•Tool Material Type: Carbide
•Coating Presence: Included
•Coating Type: TiAlN
Days to Ship: | 8 Days or more |
---|
FX-MG-CS X 60 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 60° Series
OSG
[Features]
· FX coating with excellent oxidation resistance
Days to Ship: | 8 Days or more |
---|
Carbide Solid Chamfering End Mill 3-Flute
DIXI
•Tool Material Type: Carbide
•Point Angle(θ): 90
•Coating Presence: Included
•Coating Type: TiAlN
•Shank Diameter Tolerance: h5
Days to Ship: | 8 Days or more |
---|
FAGCCRC FA Coated Carbide Corner Rounding Cutter
S&K
[Features]
· A round chamfering cutter that can process a wide range of difficult-to-cut materials from raw materials to high hardness materials.
· Carbide FA coating improves machining efficiency, provides a long life, and enables high precision finished surface machining
Days to Ship: | 8 Days or more |
---|
FAGCCRCL FA Coated Carbide Corner Rounding Cutter Long Shank
S&K
[Features]
· A round chamfering cutter that can process a wide range of difficult-to-cut materials from raw materials to high hardness materials.
· The long shank allows for machining in deep sections.
· FA GCCRC long shank end mill
Days to Ship: | 8 Days or more |
---|
SAGCCC SA Coated Carbide for Center Chamfering
S&K
Center chamfering cutter with TiAlN coating. Double angle adopted for the chamfer part.
Days to Ship: | 8 Days or more |
---|
FUJIGEN
Tip materials are K10 class carbide / M20 class carbide.
Days to Ship: | 15 Days or more |
---|
FUJIGEN
Tip materials are cermet / K10 class carbide / M20 class carbide / HSS.
Days to Ship: | 8 Days or more |
---|
Days to Ship: | 8 Days or more |
---|
Tip for Chamfering Cutter / RC End Cutter / Baitender TT32GUR
FUJIGEN
Tip materials are cermet / K10 class carbide / M20 class carbide / micro grain carbide / HSS.
Days to Ship: | 8 Days or more |
---|
FUJIGEN
Tip material is HSS.
For complete product overview and details on Tip for Mentoru-B TM32GUR-HSS see the sections below:
Days to Ship: | 8 Days or more |
---|
FUJIGEN
Tip material is HSS.
For complete product overview and details on Tip for Mentoru-B TM32GSR-HSS see the sections below:
Days to Ship: | 6 Days or more |
---|
Days to Ship: | 8 Days or more |
---|
Eagle Cut for (M8-M30) / for Birdy Cut Tip
FUJIGEN
Tip material is M20 class carbide.
Days to Ship: | 9 Days or more |
---|
FUJIGEN
Tip materials are cermet / K10 class carbide / M20 class carbide.
Days to Ship: | 8 Days or more |
---|
FUJIGEN
Tip materials are cermet / K10 class carbide / M20 class carbide.
Days to Ship: | 9 Days or more |
---|
FUJIGEN
Tip materials are cermet / K10 class carbide / M20 class carbide.
Days to Ship: | 10 Days or more |
---|
FUJIGEN
Tip materials are cermet / K10 class carbide / M20 class carbide.
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Use |
Point Angle (θ) |
Tool Diameter (D)(mm) |
Work Material |
Single Blade / Double Blade |
Peripheral Blade Availability |
Tool Material Type |
Coating Presence |
Coating Type |
R Size ( R )(mm) |
Brand | NINE9 | MISUMI | NINE9 | FUJIGEN | ATOM | GUHRING | YAMAWA | MISUMI | OSG | OSG | NOGA JAPAN | NINE9 | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OSG | OSG | OSG | NS TOOL | OSG | DIXI | S&K | S&K | S&K | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN | FUJIGEN |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | TiAlN Coated Carbide Center Drill, 60° Chamfering Model/Regular, Long | TiAlN Coated High-Speed Steel Center Drill, 90° Chamfering Model | TiAlN Coated Carbide NC Spot Drill, Small Diameter, Multi-Functional Model | TiAlN Coated Carbide Countersink, 3-Flute/90°, Regular, Long Shack | TiAlN Coated High-Speed Steel NC Spot Drill, Multi-Functional Model | TiAlN Coated High-Speed Steel NC Spot Drill, Regular, Long Shack | TiAlN Coated High-Speed Steel Countersink, 3-Flute/90°, Regular, Long Shack Model | FX-MG-CS X 60 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 60° Series | FAGCCRCL FA Coated Carbide Corner Rounding Cutter Long Shank | Tip for Chamfering Cutter / RC End Cutter / Baitender TT32GUR | |||||||||||||||||||||||||||||||||||
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 15 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 6 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 9 Days or more | 10 Days or more | 8 Days or more |
Use | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove / Engraving | Centering (Positioning) | Centering (Positioning) / Engraving | Centering (Positioning) / Chamfering / Horizontal | Centering (Positioning) / Drilling | - | Centering (Positioning) / Hole Chamfer | Centering (Positioning) | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | - | - | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) | Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Hole Chamfer | Hole Chamfer | Hole Chamfer | R Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | R Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | R Chamfer | R Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Chamfering / Horizontal | Centering (Positioning) / Chamfering / Horizontal | Centering (Positioning) / Chamfering / Horizontal | Chamfering / Horizontal / R Chamfer | Chamfering / Horizontal | Chamfering / Horizontal | Hole Chamfer | Hole Chamfer | Chamfering / Horizontal / R Chamfer | R Chamfer | R Chamfer | - |
Point Angle (θ) | 90 | - | 45 ~ 60 | - | 120 | 90 | 125° | - | 90 | 90 | 45 | 145+90 | 60 ~ 120 | 90 ~ 120 | - | - | 90 | 90 | - | - | - | - | - | - | - | 90 | 90 | - | 60 | 90 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Tool Diameter (D)(mm) | 2–10 ~ 3~14 | 0.5 ~ 5 | 0.65~2.1 ~ 0.65~2.7 | - | 0.03 ~ 3 | 4 ~ 12 | 3 ~ 16 | 1 ~ 4 | 16 ~ 25 | 16 ~ 25 | 1.5 ~ 6 | - | 0.5 ~ 2 | 2 ~ 12 | 1 ~ 4 | 6.3 ~ 20.5 | 3 ~ 12 | 2 ~ 12 | 1 ~ 4 | 1 ~ 4 | 1 ~ 4 | 6.3 ~ 20.5 | 10 ~ 25 | 10 ~ 25 | 0.5 ~ 1.5 | 0.8 ~ 1 | 0.8 ~ 1 | 0.8 ~ 12.1 | 1 ~ 3.8 | 2 ~ 12 | 4 ~ 14 | 4 ~ 14 | 3 ~ 20 | - | - | - | - | - | - | - | - | - | - | - | - |
Work Material | Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[○] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Resin[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] | - | - | General Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | - | - | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] / Aluminum[○] / Resin[○] | - | - | General Steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] | Stainless Steel[○] / Aluminum[○] / Resin[○] | Stainless Steel[○] | - | Stainless Steel[○] |
Single Blade / Double Blade | Single Blade | Double Blade | Single Blade | - | Single Blade | - | Double Blade | Double Blade | Single Blade | Single Blade | - | - | Single Blade | Single Blade | Double Blade | Single Blade | Single Blade | Single Blade | Double Blade | Double Blade | Double Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | - | Single Blade | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Peripheral Blade Availability | None | None | None | - | Included | - | None | None | None | None | - | - | Included | None | None | None | None | None | None | None | None | None | None | None | None | None | None | - | None | - | None | None | Included | - | - | - | - | - | - | - | - | - | - | - | - |
Tool Material Type | Carbide | Carbide | Carbide | - | Carbide | Carbide | Carbide | High-Speed Steel | Carbide | Carbide | - | - | Carbide | Carbide | Carbide | Carbide | Cobalt High-Speed Steel | Cobalt High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | - | - | - | - | - | - | - | - | - | - | - | - |
Coating Presence | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | - | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included |
Coating Type | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN |
R Size ( R )(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.1 ~ 2 | - | - | 0.1 ~ 5 | - | - | 0.5 ~ 5 | 0.5 ~ 5 | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy