(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
XAL Series Carbide Chamfer End Mill, 2-Flute / Short Type
MISUMI
[Features]
・Popular chamfering product with helix angle.
・Since it has a peripheral flute, it can be used for tilting, contouring and helical cutting.
・Since the outer peripheral flute has a helix angle, the machining shown in the above figure is possible. It can also be used as a deburring tool.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
Days to Ship: | 8 Days or more |
---|
XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle
MISUMI
[Features]
・Machining from positioning to chamfering with a single tool.
Days to Ship: | 8 Days or more |
---|
XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type
MISUMI
[Features]
・Recommended for deep section chamfering of general steel.
・Ideal for chamfering and V-groove machining.
・The coating with excellent lubricity exhibits stable abrasion resistance, especially in raw material machining, and can be expected to improve the shape accuracy of the workpiece.
・The long type is ideal for deep cavity milling.
Days to Ship: | 8 Days or more |
---|
XAL Series Carbide Inner Radius Cutter, 2-Flute
MISUMI
[Features]
・An essential item for corner rounding.
Days to Ship: | 8 Days or more |
---|
XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type
MISUMI
[Features]
・The popular high hardness steel chamfer end mill is even more affordable.
・Ideal for chamfering high hardness steel up to 65 HRC. (V-groove machining is not possible because there is no cutting edge at the tip)
・High-efficiency machining is possible by adopting a 6-flute shape.
・Ideal for high speed machining and dry machining of heat-treated steel and high hardness steel due to the coating with high oxidation-resistance temperature and high hardness.
・The finish of the surface roughness of the workpiece after machining is very good.
Days to Ship: | 8 Days or more |
---|
OSG
V coating enables longer service life compared to TIN-NC-LDS
Days to Ship: | 8 Days or more |
---|
OSG
Tip angles are available in 90° (45° chamfer), 120° and 130° (EX-Gold drill centering for inclined/curved surfaces).
Days to Ship: | 8 Days or more |
---|
Leading Drill, Carbide FX Coat, Long Shank FX-LS-LDS
OSG
Ideal for chamfering deep parts with a tip angle of 90°
Days to Ship: | 8 Days or more |
---|
Leading Drill, Carbide FX Coating FX-LDS
OSG
It can be used not only for chamfering, but also centering with high speed and long service life
Days to Ship: | 8 Days or more |
---|
2-Flute Spiral Chamfering Cutter FX-SCC
OSG
Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.
Days to Ship: | 8 Days or more |
---|
2-Flute Spiral Chamfering Cutter (for Copper and Aluminum Alloys) CA-SCC
OSG
Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.
Days to Ship: | 8 Days or more |
---|
2-Flute, Long Shank, Spiral Chamfering Cutter FX-LS-SCC
OSG
Long shank type to support machining deep parts. The use of helical teeth means that there is no chattering even with large protrusion.
Days to Ship: | 8 Days or more |
---|
2-Flute, Long Shank, Spiral Chamfering Cutter (for Copper and Aluminum Alloys) CA-LS-SCC
OSG
Long shank type to support machining deep parts. The use of helical teeth means that there is no chattering even with large protrusion.
Days to Ship: | 8 Days or more |
---|
3-Flute Chamfering Cutter (Negative Type) HSCT-N
OSG
It is a negative type.
For complete product overview and details on 3-Flute Chamfering Cutter (Negative Type) HSCT-N see the sections below:
Days to Ship: | 8 Days or more |
---|
3-Flute Chamfering Cutter (Positive Type) HSCT-P
OSG
Positive type.
For complete product overview and details on 3-Flute Chamfering Cutter (Positive Type) HSCT-P see the sections below:
Days to Ship: | 8 Days or more |
---|
3-Flute, Long Shank, Chamfering Cutter (Negative Type) LS-HSCT-N
OSG
It is a negative type.
For complete product overview and details on 3-Flute, Long Shank, Chamfering Cutter (Negative Type) LS-HSCT-N see the sections below:
Days to Ship: | 9 Days or more |
---|
3-Flute, Long Shank, Chamfering Cutter (Positive Type) LS-HSCT-P
OSG
Positive type.
For complete product overview and details on 3-Flute, Long Shank, Chamfering Cutter (Positive Type) LS-HSCT-P see the sections below:
Days to Ship: | 9 Days or more |
---|
VP-SCC HSS Chamfer Series V Coat XPM 2 Blade Chamfer Cutter
OSG
Adopts a sharp, torsion blade to achieve a clean machined surface free of burrs.
Days to Ship: | 8 Days or more |
---|
V-XPM-ECR HSS Chamfer Series V Coat XPM 3 Blade Corner Rounding
OSG
Powdered HSS XPM corner rounding cutter with V-coating.
Days to Ship: | 8 Days or more |
---|
FX-MG-CS X 60 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 60° Series
OSG
[Features]
· FX coating with excellent oxidation resistance
Days to Ship: | 8 Days or more |
---|
VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-Speed Steel Long Shank
OSG
Ideal for chamfering deep parts with a tip angle of 90°
Days to Ship: | 8 Days or more |
---|
Straight Shank, Countersink, HSS, TiN Coating 90°
ILIX
•Use: Hole Chamfer
•Single Blade/Double Blade: Single Blade
•Peripheral Blade Availability: Included
•Tool Material Type: High-Speed Steel
•Point Angle(θ): 90
Days to Ship: | 8 Days or more |
---|
Counter Sink Set Non-Coat 6 Pairs【6 Pieces Per Package】
ILIX
•Use: Hole Chamfer
•Single Blade/Double Blade: Single Blade
•Peripheral Blade Availability: Included
•Tool Material Type: High-Speed Steel
•Point Angle(θ): 90
Days to Ship: | 8 Days or more |
---|
Counter Sink Set TiN Coating 6 Pairs
ILIX
•Use: Hole Chamfer
•Single Blade/Double Blade: Single Blade
•Peripheral Blade Availability: Included
•Tool Material Type: High-Speed Steel
•Point Angle(θ): 90
Days to Ship: | 8 Days or more |
---|
Counter Sink Set DLC Coating 6 Pairs
ILIX
•Use: Hole Chamfer
•Single Blade/Double Blade: Single Blade
•Peripheral Blade Availability: Included
•Tool Material Type: High-Speed Steel
•Point Angle(θ): 90
Days to Ship: | 10 Days or more |
---|
MT Shank, Countersink, HSS, Non-Coated 90°
ILIX
•Use: Hole Chamfer
•Single Blade/Double Blade: Single Blade
•Peripheral Blade Availability: Included
•Tool Material Type: High-Speed Steel
•Point Angle(θ): 90
Days to Ship: | 11 Days or more |
---|
FUKUDA
Round chamfering end mill.
For complete product overview and details on Corner Rounding End Mill see the sections below:
Days to Ship: | 8 Days or more |
---|
Chatterless Chamfer Milling Machine
FUKUDA
6-flute blade improves cutting force, fantastic sharpness means zero chatter, horizontal motion during face milling is possible, and the uncomfortable metallic sound during machining is drastically reduced.
[Features]
· Chamfering.
· Drilling machines, milling machines, machining centers.
· Horizontal Milling
Days to Ship: | 8 Days or more |
---|
FUKUDA
A reamer used for finishing and chamfering center holes. The odd number of blades reduces chatter.
Days to Ship: | 8 Days or more |
---|
FUKUDA
•Use: Hole Chamfer
•Single Blade/Double Blade: Single Blade
•Tool Material Type: High-Speed Steel
•Coating Type: Non-Coated
•Shank: Straight
Days to Ship: | 8 Days or more |
---|
NINE9
•Single Blade/Double Blade: Single Blade
•Point Angle(θ): 60
•Coating Type: Non-Coated
•Tool Diameter D (mm): 16
•Product Type: Holder
Days to Ship: | 9 Days or more |
---|
NINE9
•Use: Others
•Single Blade/Double Blade: Single Blade
•Point Angle(θ): 60
•Coating Type: Non-Coated
•Tool Diameter D (mm): 6
Days to Ship: | 8 Days or more |
---|
NINE9
•Single Blade/Double Blade: Single Blade
•Tool Material Type: Carbide
•Point Angle(θ): 90
•Coating Type: Non-Coated
•Tool Diameter D (mm): 6
Days to Ship: | 8 Days or more |
---|
NC Spot Drill / Corner Radius Cutter for 90°
NINE9
•Single Blade/Double Blade: Single Blade
•Point Angle(θ): 90
•Coating Type: Non-Coated
•Product Type: Holder
Days to Ship: | 8 Days or more |
---|
NC Spot Drill / Carving Cutter for 90°
NINE9
•Single Blade/Double Blade: Single Blade
•Point Angle(θ): 90
•Coating Type: Non-Coated
•Tool Diameter D (mm): 10
•Product Type: Holder
Days to Ship: | 8 Days or more |
---|
HSS HG Center Drill, A Type, 60°
IWATATOOL
[Features]
· High-grade center drill for mass production.
· Thoroughly improves tact time and achieves a stable life.
· Center drill improved for mass production.
· Small diameter sizes, in particular, boast life several times longer than conventional center drills
Days to Ship: | 8 Days or more |
---|
IWATATOOL
[Features]
· Accuracy, machining speed, and cost performance are balanced.
· Newly shaped HSS centering tool.
· Long life with a blade tip that doesn't easily chip.
· Double angle point prevents chipping of the tip.
· No tip breakage, unlike conventional center drills.
· The high torsion design provides excellent sharpness.
· Improved Surface Roughness
Days to Ship: | 8 Days or more |
---|
HSS SP Center 120° TiCN Coating
IWATATOOL
[Features]
· Accuracy, machining speed, and cost performance are balanced.
· Newly shaped HSS centering tool.
· Long life with a blade tip that doesn't easily chip.
· Double angle point prevents chipping of the tip.
· No tip breakage, unlike conventional center drills.
· The high torsion design provides excellent sharpness.
· Improved Surface Roughness
Days to Ship: | 8 Days or more |
---|
IWATATOOL
[Features]
· Accuracy, machining speed, and cost performance are balanced.
· Newly shaped HSS centering tool.
· Long life with a blade tip that doesn't easily chip.
· Double angle point prevents chipping of the tip.
· No tip breakage, unlike conventional center drills.
· The high torsion design provides excellent sharpness.
· Improved Surface Roughness
Days to Ship: | 8 Days or more |
---|
HSS SP Center 60° TiCN Coating
IWATATOOL
[Features]
· Accuracy, machining speed, and cost performance are balanced.
· Newly shaped HSS centering tool.
· Long life with a blade tip that doesn't easily chip.
· Double angle point prevents chipping of the tip.
· No tip breakage, unlike conventional center drills.
· The high torsion design provides excellent sharpness.
· Improved Surface Roughness
Days to Ship: | 8 Days or more |
---|
IWATATOOL
[Features]
· Accuracy, machining speed, and cost performance are balanced.
· Newly shaped HSS centering tool.
· Long life with a blade tip that doesn't easily chip.
· Double angle point prevents chipping of the tip.
· No tip breakage, unlike conventional center drills.
· The high torsion design provides excellent sharpness.
· Improved Surface Roughness
Days to Ship: | 8 Days or more |
---|
HSS SP Center 90° TiCN Coating
IWATATOOL
[Features]
· Accuracy, machining speed, and cost performance are balanced.
· Newly shaped HSS centering tool.
· Long life with a blade tip that doesn't easily chip.
· Double angle point prevents chipping of the tip.
· No tip breakage, unlike conventional center drills.
· The high torsion design provides excellent sharpness.
· Improved Surface Roughness
Days to Ship: | 8 Days or more |
---|
IWATATOOL
Ideal for aluminum, resin, etc. Capable of reducing burrs and improving surface roughness. Capable of high precision machining, and a superior finish can be achieved. DLC coating, effective for easily welded work materials, is also standardized.
Days to Ship: | 9 Days or more |
---|
HSS SP Center Sharp 60° DLC Coating
IWATATOOL
Ideal for aluminum, resin, etc. Capable of reducing burrs and improving surface roughness. Capable of high precision machining, and a superior finish can be achieved. DLC coating, effective for easily welded work materials, is also standardized.
Days to Ship: | 9 Days or more |
---|
IWATATOOL
Ideal for aluminum, resin, etc. Capable of reducing burrs and improving surface roughness. Capable of high precision machining, and a superior finish can be achieved. DLC coating, effective for easily welded work materials, is also standardized.
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Use |
Point Angle (θ) |
Tool Diameter (D)(mm) |
Work Material |
Single Blade / Double Blade |
Peripheral Blade Availability |
Tool Material Type |
Coating Presence |
Coating Type |
R Size ( R )(mm) |
Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | ILIX | ILIX | ILIX | ILIX | ILIX | FUKUDA | FUKUDA | FUKUDA | FUKUDA | NINE9 | NINE9 | NINE9 | NINE9 | NINE9 | IWATATOOL | IWATATOOL | IWATATOOL | IWATATOOL | IWATATOOL | IWATATOOL | IWATATOOL | IWATATOOL | IWATATOOL | IWATATOOL |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | XAL Series Carbide Chamfer End Mill, 2-Flute / 15° Helix Angle | XAL Series Carbide Chamfering / V-Groove End Mill, 2-Flute / Long Shank Type | XCP Series Carbide Chamfer End Mill for High Hardness Steel Machining / 6-Flute / Short Type | 2-Flute Spiral Chamfering Cutter (for Copper and Aluminum Alloys) CA-SCC | 2-Flute, Long Shank, Spiral Chamfering Cutter (for Copper and Aluminum Alloys) CA-LS-SCC | 3-Flute, Long Shank, Chamfering Cutter (Negative Type) LS-HSCT-N | 3-Flute, Long Shank, Chamfering Cutter (Positive Type) LS-HSCT-P | V-XPM-ECR HSS Chamfer Series V Coat XPM 3 Blade Corner Rounding | FX-MG-CS X 60 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 60° Series | VP-LS-LDS Hole Chamfering, Leading Drill, V Coating Powder High-Speed Steel Long Shank | |||||||||||||||||||||||||||||||||||
CAD |
|
|
|
|
| ||||||||||||||||||||||||||||||||||||||||
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 11 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 9 Days or more | 8 Days or more |
Use | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | - | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal | R Chamfer | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | R Chamfer | Hole Chamfer / Chamfering / Horizontal | Hole Chamfer | Hole Chamfer | Centering (Positioning) / Hole Chamfer | Others | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove |
Point Angle (θ) | - | - | - | - | - | 90 | 90 ~ 130 | 90 | 90 | 90 | 90 | 90 | 90 | 90 ~ 90°$90° | 90 | 90 | 90 | - | - | 60 | 90 | 90 | 90 | 90 | 90 | 90 | - | 60 ~ 120 | 60 ~ 90 | 60 ~ 120 | 60 | 60 | 90 | 90 | 90 | 60 | 120 | 120 | 60 | 60 | 90 | 90 | 60 | 60 | 90 |
Tool Diameter (D)(mm) | - | - | - | - | - | 3 ~ 25 | 3 ~ 25 | 16 ~ 25 | 16 ~ 25 | 0.8 ~ 1 | 0.8 ~ 1 | 0.8 ~ 1 | 0.8 ~ 1 | 1 ~ 2 | 1 ~ 2 | 1 ~ 2 | 1 ~ 2 | - | 3 ~ 10 | 1 ~ 3.8 | 3 ~ 25 | 4.3 ~ 37 | 6.3,8.3,10.4,12.4,16.5,20.5 | 6.3,8.3,10.4,12.4,16.5,20.5 | 6.3,8.3,10.4,12.4,16.5,20.5 | 40 ~ 80 | - | - | - | - | 16 | 6 | 6 | 16 ~ 20 | 10 | 0.3 ~ 1 | 0.9 ~ 3 | 0.9 ~ 3 | 0.3 ~ 1 | 0.3 ~ 1 | 0.3 ~ 1 | 0.3 ~ 1 | 0.3 ~ 2 | 0.3 ~ 2 | 0.3 ~ 2 |
Work Material | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎] | General Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[◎] / Resin[○] | Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] | General Steel[○] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] | General Steel[◎] / Heat-Treated Steel[○] / High-Hardness Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[○] / Resin[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | General Steel[○] / Cast Iron[○] / Resin[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Resin[○] | - | - | - | - | - | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Aluminum[○] / Copper[○] / Resin[○] | Aluminum[○] / Copper[○] / Resin[○] | General Steel[○] / Aluminum[○] / Copper[○] / Resin[○] |
Single Blade / Double Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade |
Peripheral Blade Availability | Included | None | Included | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | Included | None | Included | Included | Included | Included | Included | Included | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None |
Tool Material Type | Carbide | Carbide | Carbide | Carbide | Carbide | Powdered High-Speed Steel | High-Speed Steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Powdered High-Speed Steel | Powdered High-Speed Steel | Carbide | Powdered High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | Cobalt High-Speed Steel | High-Speed Steel | High-Speed Steel | - | - | Carbide | - | - | Cobalt High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel |
Coating Presence | Included | Included | Included | Included | Included | Included | None | Included | Included | Included | None | Included | None | Included / None | None | None | None | Included | Included | Included | Included | Included | None | Included | Included | None | None | None | None | None | None | None | None | None | None | None | None | Included | None | Included | None | Included | None | Included | None |
Coating Type | AlCrN | AlCrN | AlCrN | AlCrN | Ts | TiCN | Non-Coated | TiAlN | TiAlN | TiAlN | Non-Coated | TiAlN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiCN | TiCN | TiAlN | TiCN | TiN | Non-Coated | TiN | DLC | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | - | - | TiCN | - | TiCN | - | TiCN | - | DLC | - |
R Size ( R )(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.5 ~ 4 | - | - | - | - | - | - | - | 0.5 ~ 30 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy