(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
ASAHI TOOLS
•Use: R Chamfer
•R Size (mm): 1.25
•Single Blade/Double Blade: Single Blade
•Tool Material Type: Carbide
•Coating Type: Non-Coated
Days to Ship: | 8 Days or more |
---|
CS2S Type II Chamfering Cutter (Single Flute), Straight Shank
OKAZAKI
1-flute type. For steel and stainless steel. All products are TiN coated.
Days to Ship: | 8 Days or more |
---|
CS3S Type III Chamfering Cutter (3-Flute), Straight Shank
OKAZAKI
3-flute type. For steel and stainless steel. All products are TiN coated.
Days to Ship: | 8 Days or more |
---|
SVM Chamfering Mill, Non-Coated
OKAZAKI
In addition to hole chamfering, it can be used for transverse feed cutting such as V-groove machining and C-surface machining.
Days to Ship: | 10 Days or more |
---|
SVMA Chamfering Mill, OK Coated
OKAZAKI
In addition to hole chamfering, it can be used for transverse feed cutting such as V-groove machining and C-surface machining.
Days to Ship: | 10 Days or more |
---|
Solid Center Drill CDL / S-CDL Type
DIJET
It is a tool with excellent abrasion resistance.
Days to Ship: | 8 Days or more |
---|
GUHRING
[Features]
· Allows simultaneous centering and chamfering.
Days to Ship: | 8 Days or more |
---|
GUHRING
[Features]
· Allows simultaneous centering and chamfering.
· Use of FIRE coating achieves a longer life while enabling high speed cutting.
Days to Ship: | 11 Days or more |
---|
GUHRING
Allows simultaneous centering and chamfering. FIRE coating enables high-speed machining with a long service life.
Days to Ship: | 9 Days or more |
---|
GUHRING
Allows simultaneous centering and chamfering. FIRE coating enables high-speed machining with a long service life.
Days to Ship: | 8 Days or more |
---|
GUHRING
Allows simultaneous centering and chamfering. Cobalt HSS boasts excellent heat and abrasion resistance.
Days to Ship: | 9 Days or more |
---|
NC Spotting Drill Long Shank 90° 559
GUHRING
Deep part centering and chamfering of the workpiece can be done at the same time.
Days to Ship: | 8 Days or more |
---|
Straight Shank, Countersink 3-Flute 60° 472
GUHRING
Has 3 cutting edges for excellent cutting balance, enabling highly circular, stable chamfering and deburring with little chatter.
Days to Ship: | 8 Days or more |
---|
Straight Shank, Countersink 3-Flute 90° 1326
GUHRING
[Features]
· Has 3 cutting edges for excellent cutting balance, enabling highly circular, stable chamfering and deburring with little chatter.
· Using A coating achieves a longer life.
Days to Ship: | 8 Days or more |
---|
Straight Shank, Countersink 3-Flute 90° 327
GUHRING
Has 3 cutting edges for excellent cutting balance, enabling highly circular, stable chamfering and deburring with little chatter. Long product life with TiN coating.
Days to Ship: | 8 Days or more |
---|
Straight Shank, Countersink 3-Flute 90° 476
GUHRING
Has 3 cutting edges for excellent cutting balance, enabling highly circular, stable chamfering and deburring with little chatter.
Days to Ship: | 8 Days or more |
---|
Straight Shank, Countersink 3-Flute, 90° (Set of 327) 499
GUHRING
[Features]
· 6-piece set of 327.
· Steel case provided.
Days to Ship: | 27 Days or more |
---|
Straight Shank, Countersink 3-Flute, 90° (Set of 476) 498
GUHRING
[Features]
· 6-piece set of 476.
· Steel case provided.
Days to Ship: | 28 Days or more |
---|
Straight Shank, Countersink, Multi Blade 90° 474
GUHRING
Adopts multiple blades to achieve a clean machined surface free of burrs.
Days to Ship: | 8 Days or more |
---|
Tapered Shank Countersink, 3-Flute 60° 473
GUHRING
Has 3 cutting edges for excellent cutting balance, enabling highly circular, stable chamfering and deburring with little chatter.
Days to Ship: | 28 Days or more |
---|
Tapered Shank Countersink, 3-Flute 90° 328
GUHRING
Has 3 cutting edges for excellent cutting balance, enabling highly circular, stable chamfering and deburring with little chatter. Long product life with TiN coating.
Days to Ship: | 26 Days or more |
---|
Tapered Shank Countersink, 3-Flute 90° 477
GUHRING
Has 3 cutting edges for excellent cutting balance, enabling highly circular, stable chamfering and deburring with little chatter.
Days to Ship: | 8 Days or more |
---|
Tapered Shank Countersink, Multi-Flute 60° 471
GUHRING
Adopts multiple blades to achieve a clean machined surface free of burrs.
Days to Ship: | 27 Days or more |
---|
GUHRING
[Features]
· A deburring fork for chamfering and deburring of hole entrances and exits.
· Internal oil supply type
Days to Ship: | 28 Days or more |
---|
GUHRING
Capable of chamfering and deburring of hole entrances and exits by milling.
Days to Ship: | 9 Days or more |
---|
Double Head Center Drill 60° 581
GUHRING
JIS1 equivalent double-headed center drill.
Days to Ship: | 9 Days or more |
---|
High Helix Groove A Type 60° Center Hole Drill CE-S
YAMAWA
Suitable for center hole machining of viscous and soft work materials.
Days to Ship: | 8 Days or more |
---|
High Helix Groove JIS B Type 60° Center Hole Drill CESB
YAMAWA
Suitable for center hole machining of viscous and soft work materials.
Days to Ship: | 8 Days or more |
---|
NOGA JAPAN
•Single Blade/Double Blade: Single Blade
•Tool Material Type: High-Speed Steel
Days to Ship: | 8 Days or more |
---|
EIKOSHA
Drill for positioning and chamfering.
[Features]
· TiN coating achieves longer life.
Days to Ship: | 8 Days or more |
---|
EIKOSHA
[Features]
· It is for center hole finish and chamfer finish.
Days to Ship: | 8 Days or more |
---|
Mini Corner R Cutter (Half) MCRC
EIKOSHA
[Features]
· It is a round chamfering cutter whose tip diameter is unified at φ2.
Days to Ship: | 9 Days or more |
---|
Carbide Corner Radius Cutter CCRC
EIKOSHA
[Features]
· A round chamfering cutter for corners.
· Solid up to R2.5, attached blade from R3.
Days to Ship: | 9 Days or more |
---|
Carbide Mini Corner R Cutter CMCRC
EIKOSHA
[Features]
· It is a round chamfering cutter with a small tip diameter.
· A solid type.
Days to Ship: | 9 Days or more |
---|
Carbide Center Drill TiAlN KCDA-60
KYOWASEIKO
Both tip diameter and large diameter have torsional angle of 30°. Suppresses burrs and enables high-efficiency machining.
Days to Ship: | 8 Days or more |
---|
Carbide Center Drill TiAlN KCDA-90
KYOWASEIKO
Both tip diameter and large diameter have torsional angle of 30°. Suppresses burrs and enables high-efficiency machining.
Days to Ship: | 8 Days or more |
---|
Carbide Center Drill Noncoat KCD-60
KYOWASEIKO
Both tip diameter and large diameter have torsional angle of 30°. Suppresses burrs and enables high-efficiency machining.
Days to Ship: | 9 Days or more |
---|
Carbide Center Drill Noncoat KCD-90
KYOWASEIKO
Both tip diameter and large diameter have torsional angle of 30°. Suppresses burrs and enables high-efficiency machining.
Days to Ship: | 8 Days or more |
---|
Carbide Chamfering Cutter KMC-2
KYOWASEIKO
Ideal for chamfering and V-groove machining.
Days to Ship: | 8 Days or more |
---|
Carbide Inversed Chamfering Cutter KUMC-4
KYOWASEIKO
4 straight flutes. 45° (Single Angle Type)
Days to Ship: | 8 Days or more |
---|
Carbide Inversed Chamfering Cutter KUMW-4
KYOWASEIKO
4 straight flutes. 90° (Double Angle Type)
Days to Ship: | 8 Days or more |
---|
Poulten&Graf
•Single Blade/Double Blade: Double Blade
•Peripheral Blade Availability: Included
•Point Angle(θ): 90
•Coating Presence: Included
•Coating Type: Others
Days to Ship: | 10 Days or more |
---|
Carbide 2-Flute Chamfering V-Grooving End Mill 90° E107X
7 LEADERS
•Tool Material Type: Carbide
•Point Angle(θ): 90
•Coating Presence: Included
•Coating Type: Others
•Material: MG
Days to Ship: | 8 Days or more |
---|
FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series
OSG
[Features]
· FX coating with excellent oxidation resistance
Days to Ship: | 8 Days or more |
---|
WXL-Coated Chamfering Cutter Negative Type Regular W-HSCT-N
OSG
[Features]
・ Unique 3-flute specification suppresses chattering during machining and realizes high efficiency and high feed machining
・ 40° twist and wide gullet combine sharpness and finished surface are achieved at a high level.
・ The return and burr are drastically reduced
・ Excellent cutting chip discharge
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
CAD |
Days to Ship |
Use |
Point Angle (θ) |
Tool Diameter (D)(mm) |
Work Material |
Single Blade / Double Blade |
Peripheral Blade Availability |
Tool Material Type |
Coating Presence |
Coating Type |
R Size ( R )(mm) |
Brand | ASAHI TOOLS | OKAZAKI | OKAZAKI | OKAZAKI | OKAZAKI | DIJET | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | YAMAWA | YAMAWA | NOGA JAPAN | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | KYOWASEIKO | KYOWASEIKO | KYOWASEIKO | KYOWASEIKO | KYOWASEIKO | KYOWASEIKO | KYOWASEIKO | Poulten&Graf | 7 LEADERS | OSG | OSG |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | CS2S Type II Chamfering Cutter (Single Flute), Straight Shank | FX-MG-CS X 90 Hole Chamfering, 3-Flute Countersink, FX Coating Carbide 90° Series | |||||||||||||||||||||||||||||||||||||||||||
CAD | |||||||||||||||||||||||||||||||||||||||||||||
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 11 Days or more | 9 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 27 Days or more | 28 Days or more | 8 Days or more | 28 Days or more | 26 Days or more | 8 Days or more | 27 Days or more | 28 Days or more | 9 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Use | R Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer / Chamfering / Horizontal / V Groove | Hole Chamfer / Chamfering / Horizontal / V Groove | Drilling | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | - | - | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Hole Chamfer | Centering (Positioning) / Hole Chamfer | Centering (Positioning) / Hole Chamfer | - | Centering (Positioning) / Hole Chamfer / Drilling | Hole Chamfer | Hole Chamfer / Chamfering / Horizontal / R Chamfer | Hole Chamfer / Chamfering / Horizontal / R Chamfer | Hole Chamfer / Chamfering / Horizontal / R Chamfer | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Centering (Positioning) | Chamfering / Horizontal | Chamfering / Horizontal | Chamfering / Horizontal | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Centering (Positioning) / Hole Chamfer / Chamfering / Horizontal / V Groove | Chamfering / Horizontal |
Point Angle (θ) | - | 90 | 90 | 90 ~ 120 | 90 ~ 120 | 60 ~ 90 | 120 | 120 | 120 | 90 | 90 | 90 | 60 | 90 | 90 | 90 | 90 | 90 | 90 | 60 | 90 | 90 | 60 | - | 90 | 118 | 60° | 60° | - | 90 ~ 135 | 120 | - | - | - | 120° | 120° | 120° | 120° | 90° | - | - | 90 | 90 | 90 | 90° |
Tool Diameter (D)(mm) | 8 | 66 | 20 | 3 ~ 20 | 3 ~ 20 | 2 ~ 5 | 5 ~ 20 | 3 ~ 25.4 | 5 ~ 20 | 5 ~ 20 | 3 ~ 20 | 15.87 | 6.3 ~ 25 | 4.3 ~ 31 | 5 ~ 31 | 4.3 ~ 31 | 6.30/8.30/10.40/12.40/16.50/20.50 | 6.30/8.30/10.40/12.40/16.50/20.50 | 8 ~ 20 | 16 ~ 80 | 25 ~ 50 | 15 ~ 100 | 16 ~ 100 | - | 3 ~ 12 | 1.25 | 3.5 | 3.15 ~ 31.5 | - | 3 ~ 25 | 6 ~ 60 | 3 ~ 19 | - | - | 0.3 ~ 3 | 0.3 ~ 3 | 0.3 ~ 3 | 0.3 ~ 3 | 0.3 ~ 4 | - | - | 3 ~ 20 | 0.5 ~ 20 | 1 ~ 3.8 | - |
Work Material | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[◎] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[◎] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] | Cast Iron[○] |
Single Blade / Double Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Double Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | Single Blade | - | Single Blade | Single Blade | Double Blade | Double Blade | Single Blade | - | - | - | - | - | Double Blade | Double Blade | Double Blade | Double Blade | Single Blade | Single Blade | Single Blade | Double Blade | - | Single Blade | Single Blade |
Peripheral Blade Availability | None | None | None | Included | Included | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | None | None | - | - | - | - | - | - | - | - | - | - | - | - | - | Included | - | None | None |
Tool Material Type | Carbide | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Carbide | Carbide | Carbide | Carbide | High-Speed Steel | Carbide | Carbide | Cobalt High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | Carbide | Carbide | High-Speed Steel | High-Speed Steel | High-Speed Steel | High-Speed Steel | Cobalt High-Speed Steel | High-Speed Steel | Cobalt High-Speed Steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | - | Carbide | Carbide | Carbide |
Coating Presence | None | Included | Included | None | Included | None | None | Included | Included | Included | None | None | None | Included | Included | None | Included | None | None | None | Included | None | None | None | Included | None | None | None | - | Included | None | None | None | None | Included | Included | None | None | None | None | None | Included | Included | Included | Included |
Coating Type | Non-Coated | TiN | TiN | Non-Coated | TiAlN | Non-Coated | - | Others | Others | Others | - | - | - | TiAlN | TiN | - | TiN | - | - | - | TiN | - | - | - | TiAlN | - | - | - | - | TiN | - | - | - | - | TiAlN | TiAlN | - | - | - | - | - | Others | Others | TiAlN | - |
R Size ( R )(mm) | 1.25 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.5 ~ 8 | 0.5 ~ 20 | 1 ~ 8 | - | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy