(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
HSS Straight Reamers - Straight Shank, Chucking Type, SCR
EIKOSHA
General purpose type. The blade is short and the shank is long. For deep hole finishing, etc.
Days to Ship: | 8 Days or more |
---|
HSS Straight Reamers - Straight Shank, 0.01 mm Increments
MISUMI
Hand reamer that can be selected in 0.01 mm increments
Days to Ship: | Same day or more |
---|
Show Stock Products
HSS Straight Reamers - Morse Tapered Hand Type, MTR-F
EIKOSHA
Straight reamer (HSS) for morse taper holes for finishing.
[Features]
· Shank has a square section that can also be used for turning by hand.
· Seven standards are available.
[Applications]
· Ideal for finish machining of MT0 to MT6 holes.
Days to Ship: | 8 Days or more |
---|
HSS Straight Reamers - Straight Shank, Hand Type, HR, 8-12 Flutes
TAIYO TOOL
•Groove Shape: Straight
•Link Model: Straight Link
Days to Ship: | 8 Days or more |
---|
HSS Straight Reamers - Long Hand Type, Deep Hole Machining, LHR
EIKOSHA
Long Type, Deep Hole Use, for Improved Guidance, 1° Bite Gradient
Days to Ship: | 8 Days or more |
---|
HSS Straight Reamers - Tapered Shank, Tapered Pin Type, TPR
EIKOSHA
For 1/48, 1/50 Taper Pin
For complete product overview and details on HSS Straight Reamers - Tapered Shank, Tapered Pin Type, TPR see the sections below:
Days to Ship: | 8 Days or more |
---|
HSS Straight Reamers - Straight/End Mill Shank, Hand Type
FPTOOLS
[Features]
· A hand reamer is used to finish the bore and the tip bite section is given a slight gradient (about 1 degree) to improve the guidance.
· Blade diameter tolerance is unique at +0.005/0(J5).
Days to Ship: | 8 Days or more |
---|
HSS Straight Reamers - Straight Shank, Chucking Type, HC
FPTOOLS
Straight Shank Chucking Reamer.
Days to Ship: | 8 Days or more |
---|
HSS Straight Reamers - Straight Shank, Hand Type, HR, 4-10 Flutes
EIKOSHA
General-purpose straight reamer (HSS) with straight edge that can be hand turned.
[Features]
· The shank has an angle and can be hand turned.
· The bite is long (angle set at 1°) and the cutting edge does not easily get damaged.
· Blade tip diameter: Available from 0.5 to 60.
· Shank type: Available in end mill shank and straight shank.
· Applicable work materials: General steel, cast iron, aluminum, copper, die steel and alloy steel.
· Material: SKH51. Right-blade Straight, Bite Angle: 1°.
[Applications]
· Optimal for general purpose finishing.
Days to Ship: | 8 Days or more |
---|
HSS Straight Reamers - Straight Shank, for Various Work Materials, HR
Trusco Nakayama
[Features]
· With a wide bite angle and shank rectangular portion, it provides highly accurate finishing of drill holes and rough reamed holes.
· Originally intended for hand finishing, but can also be used for final finishing using machines.
[Applications]
· Work materials: Cast iron, carbon steel, alloy steel, tool steel, stainless steel, aluminum alloy.
Days to Ship: | 8 Days or more |
---|
HSS Straight Reamers - Straight Shank, Chucking Type, CR
OKAZAKI
Short blade type. A straight shank. Uses MCo material (cobalt high speed steel).
Days to Ship: | 8 Days or more |
---|
HSS Straight Reamers - Straight Shank, for Cast Iron and General Steel, HR
OKAZAKI
Cast iron and general steel hole finishing. Inch sizes are also available. Uses MCo material (cobalt high speed steel).
Days to Ship: | 8 Days or more |
---|
HSS Straight Reamers - Straight Shank, Pipe Type, PR
EIKOSHA
[Features]
· For hole finishing of tapered pipe screw 1/16 taper (PT/NPT/NPTE).
Days to Ship: | 8 Days or more |
---|
HSS Straight Reamers - Long Shank, Chucking Type, SCRL
EIKOSHA
[Features]
· Short blade length and super long shank.
· Ideal for deep hole finishing.
Days to Ship: | 8 Days or more |
---|
HSS Straight Reamers - Straight Shank, Long Hand Type, LHR
TAIYO TOOL
•Groove Shape: Straight
•Link Model: Straight Link
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Tool Diameter(mm) |
Link Model |
Work Material |
Groove Length(mm) |
Coating Presence |
Groove Shape |
Base-Blade Availability |
Tip Diameter |
Large Tip Diameter |
Corners |
Brand | EIKOSHA | MISUMI | EIKOSHA | TAIYO TOOL | EIKOSHA | EIKOSHA | FPTOOLS | FPTOOLS | EIKOSHA | Trusco Nakayama | OKAZAKI | OKAZAKI | EIKOSHA | EIKOSHA | TAIYO TOOL |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | HSS Straight Reamers - Straight Shank, Hand Type, HR, 8-12 Flutes | HSS Straight Reamers - Long Hand Type, Deep Hole Machining, LHR | HSS Straight Reamers - Straight Shank, Hand Type, HR, 4-10 Flutes | HSS Straight Reamers - Straight Shank, for Various Work Materials, HR | HSS Straight Reamers - Straight Shank, for Cast Iron and General Steel, HR | ||||||||||
Days to Ship | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Tool Diameter(mm) | 1 ~ 32 | 0.5 ~ 30 | - | 1-1/2 ~ 51 | 1/2 ~ 26 | - | 15.2 | 1 ~ 14 | 3.12 ~ 28 | 1.8 ~ 5 | 6 | 2.2 | - | 3 ~ 20 | 1/2 ~ 26 |
Link Model | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link |
Work Material | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | - | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | General Steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | General Steel[○] / Heat-Treated Steel[○] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[○] / Alloy Steel[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[○] / Alloy Steel[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Die Steel[○] / Alloy Steel[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | General Steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | - |
Groove Length(mm) | 15 ~ 75 | 12 ~ 150 | 65 ~ 205 | 85 ~ 180 | 50 ~ 250 | 163 | 95 | 20 ~ 50 | 40 ~ 140 | - | 30 | 30 | 19 ~ 45 | 35 ~ 60 | 150 ~ 200 |
Coating Presence | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None |
Groove Shape | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight |
Base-Blade Availability | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None |
Tip Diameter | - | - | 6.547 ~ 54.388 | - | - | 9.5 | - | - | - | - | - | - | 8.025 ~ 54.84 | - | - |
Large Tip Diameter | - | - | 9.93 ~ 65.076 | - | - | 12.66 | - | - | - | - | - | - | 9.213 ~ 57.653 | - | - |
Corners | - | - | 1/19.002 ~ 1/20.047 | - | - | 1/50 | - | - | - | - | - | - | 1/16 | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy