(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Carbide Straight Reamers - Straight/End Mill Shank, CRM
OSG
Blade tip adopts carbide alloy material.
Days to Ship: | 8 Days or more |
---|
Carbide Straight Reamers - 2 Flute/4 Flute, Regular, Corner Radius Model
MISUMI
Reduces the number of steps in finishing of radius-shaped blind holes
Days to Ship: | 10 Days or more |
---|
Carbide Straight Reamers - End Mill Shank, Mu Type
FPTOOLS
[Features]
· Easy tool management: As well as being suitable for high-precision drilling as the nominal dimensions are manufactured with 1 μm increments, 11,800 sizes are available for selection.
· Ultra-high precision: Tolerance of 0 to less than +1 μm is ideal for drilling ultra-precision holes.
· High durability: Excellent durability, maintaining precision over long periods of time.
· Application: General work materials.
Days to Ship: | 8 Days or more |
---|
Carbide Straight Reamers - End Mill Shank, TiCN2 Coated, CSR-C
EIKOSHA
TiCN647 coating adopted. Prevents welding and improves the roughness of the finished surface
Days to Ship: | 8 Days or more |
---|
Carbide Straight Reamers - End Mill Shank, General Purpose, G Series
FPTOOLS
[Features]
· The most universally usable reamer among all series of carbide reamers.
· Approximately 5 to 10 times greater durability than conventional HSS reamers, maintaining its precision for long periods of time.
· Processing hole precision is also superior to the HSS reamer, allowing use at higher cutting speed and feeding speed.
· Because the pitch is 0.005 mm, there are no breaks between sizes and negative tolerance hole drilling is also possible.
Days to Ship: | 7 Days or more |
---|
Carbide Straight Reamers - End Mill Shank, 2 Flute/4 Flute, Long
MISUMI
Reduces the number of deep hole finishing steps
Days to Ship: | 10 Days or more |
---|
Carbide Straight Reamers - 2 Flute/4 Flute, Regular, Corner C Model
MISUMI
Reduces the finishing steps of blind holes with C-shaped corners
Days to Ship: | 10 Days or more |
---|
Carbide Straight Reamers - End Mill Shank, Deep Hole Machining, C Series
FPTOOLS
[Features]
· Ultra-low price contributes to cost reductions.
· Carbide is used for the reamer, greatly reducing the price.
· It will help reduce the machining costs by the improvement of tool life and reduction of tool costs.
· Deep hole machining possible: Thinner shank diameter makes it possible to machine deep holes.
· The processing range can be expanded.
· High-precision: Precision equivalent to the best-selling carbide reamer "G-Series".
· Can be used with peace of mind
Days to Ship: | 8 Days or more |
---|
Carbide Straight Reamers - End Mill Shank, 2 Flute/4 Flute, Regular
MISUMI
Full lineup reduces drilling steps
Days to Ship: | 10 Days or more |
---|
Carbide Straight Reamers - 2 Flute/4 Flute, Long, Corner Radius Model
MISUMI
Ideal for finishing deep radius-shaped blind holes
Days to Ship: | 10 Days or more |
---|
Carbide Straight Reamers - 2 Flute/4 Flute, Long, Corner C Model
MISUMI
Ideal for finishing deep blind holes with C-shaped corners
Days to Ship: | 10 Days or more |
---|
Carbide Straight Reamers - End Mill Shank, Flat Bottom Blade
MISUMI
Popular straight reamer with carbide bottom blade
Days to Ship: | 8 Days or more |
---|
Days to Ship: | 10 Days or more |
---|
Carbide Straight Reamers - End Mill Shank, Long
MISUMI
The long type is available also in extensive assortment of sizes
Days to Ship: | 10 Days or more |
---|
Carbide Straight Reamers - Non-Coated/TS Coated, High Hardness Steel Machining
MISUMI
Also available in a high-hardness steel machining version
Days to Ship: | 8 Days or more |
---|
Carbide Straight Reamers - Precision, P5SRM/P6SRM
MISUMI
Capable of finishing holes with cleaner surface roughness than a conventional reamer.
Days to Ship: | 10 Days or more |
---|
Carbide Straight Reamers - Pilot Hole Correction Boring Bit, BRB
MISUMI
If the hole pitch has an intersection or the inclination tolerance of the hole is demanding, the bend of the hole can be modified by using this product before finishing with the reamer.
Days to Ship: | 10 Days or more |
---|
Carbide Straight Reamers - High Speed Drilling, TiAlN Coated
MISUMI
End mill for high-speed drilling
Days to Ship: | 8 Days or more |
---|
Carbide Step Reamer, Custom Dimensions / Long Shank Type
MISUMI
[Features]
・Ideal for coaxial finishing of stepped holes.
Days to Ship: | 10 Days or more |
---|
Carbide Step Reamer, Custom Dimensions Type
MISUMI
[Features]
・Ideal for coaxial finishing of stepped holes.
Days to Ship: | 10 Days or more |
---|
Carbide Straight Reamers - for Aluminum, DLC Coated, CSR-DLC
EIKOSHA
DLC coating with low coefficient of friction adopted, for aluminum and nonferrous metals
Days to Ship: | 8 Days or more |
---|
Carbide Straight Reamers - End Mill Shank, CPRSM, Short
OKAZAKI
A solid type. The roughing tip ensures uniform removal and stable specification dimensions. Torsional angle 35°
Days to Ship: | 12 Days or more |
---|
Carbide Straight Reamers - End Mill Shank, CPRM
OKAZAKI
A solid type. The roughing tip ensures uniform removal and stable specification dimensions. Torsional angle 45°
Days to Ship: | 12 Days or more |
---|
Carbide Straight Reamers - End Mill Shank, NSR
NEWSTRONG
[Features]
· The blade groove division angles are unequally divided.
· If the division angles of the blade grooves are the same, the same force will be applied to each blade, which causes the same vibration and makes them susceptible to resonance, causing chattering.
· By unequally dividing the blade grooves, the force applied to each blade is also changed to suppress resonance, and by decreasing chattering, the processing accuracy is improved and roundness is stabilized.
· A carbide tip is brazed onto SCM (adhesive material) to relax the spindle flex.
· Grip quality of holder improved: The use of an endmill shank (quenched) makes collet use possible, with better grip accuracy compared to drill chucks. Special collet manufacturing is not required.
· Improved blade diameter precision: Uses k5 for the blade diameter tolerance to make it easier to enter at H7 tolerance.
· Neck is designed to be longer for deep hole machining
Days to Ship: | 8 Days or more |
---|
Carbide Straight Reamers - End Mill Shank, NSC
NEWSTRONG
[Features]
· Material: Z-10 solid.
· Ideal for modification of holes after drilling for semi-finishing or machining prior to reaming.
· Produced at a maximum of φ28.8, with repolishing possible (tipped at φ13.8 or higher)
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Tool Diameter(mm) |
Link Model |
Work Material |
Groove Length(mm) |
Coating Presence |
Groove Shape |
Base-Blade Availability |
Tip Diameter |
Large Tip Diameter |
Brand | OSG | MISUMI | FPTOOLS | EIKOSHA | FPTOOLS | MISUMI | MISUMI | FPTOOLS | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | EIKOSHA | OKAZAKI | OKAZAKI | NEWSTRONG | NEWSTRONG |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Carbide Straight Reamers - 2 Flute/4 Flute, Regular, Corner Radius Model | Carbide Straight Reamers - End Mill Shank, TiCN2 Coated, CSR-C | Carbide Straight Reamers - End Mill Shank, General Purpose, G Series | Carbide Straight Reamers - End Mill Shank, 2 Flute/4 Flute, Long | Carbide Straight Reamers - 2 Flute/4 Flute, Regular, Corner C Model | Carbide Straight Reamers - End Mill Shank, Deep Hole Machining, C Series | Carbide Straight Reamers - End Mill Shank, 2 Flute/4 Flute, Regular | Carbide Straight Reamers - 2 Flute/4 Flute, Long, Corner Radius Model | Carbide Straight Reamers - 2 Flute/4 Flute, Long, Corner C Model | Carbide Straight Reamers - End Mill Shank, Flat Bottom Blade | Carbide Straight Reamers - Non-Coated/TS Coated, High Hardness Steel Machining | Carbide Straight Reamers - Pilot Hole Correction Boring Bit, BRB | Carbide Straight Reamers - High Speed Drilling, TiAlN Coated | Carbide Straight Reamers - for Aluminum, DLC Coated, CSR-DLC | |||||||||||
Days to Ship | 8 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 7 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 12 Days or more | 12 Days or more | 8 Days or more | 8 Days or more |
Tool Diameter(mm) | 0.3 ~ 13.05 | 0.4 ~ 15.995 | 0.5 ~ 10.009 | 0.8 ~ 12.05 | 0.2 ~ 12.1 | 0.3 ~ 5.995 | 0.4 ~ 15.995 | 2.91 ~ 12.1 | 0.3 ~ 5.995 | 0.4 ~ 5.995 | 0.4 ~ 5.995 | 3 ~ 10.01 | 0.3 ~ 15.99 | 0.3 ~ 5.99 | 1 ~ 10 | 0.5 ~ 5.9 | 1.8 ~ 5 | 2 ~ 10 | - | - | 0.5 ~ 12.05 | 2.95 ~ 12.05 | 2.95 ~ 12.05 | 6.00 (for H7) ~ 13.00 (for H7) | 5.8 ~ 12.8 |
Link Model | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link |
Work Material | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[◎] / Heat-Resistant Alloy[○] / Alloy Steel[◎] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○/◎] / Heat-Treated Steel[○/◎] / High-Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[◎] / Aluminum[◎] | General Steel[◎] / Aluminum[◎] | Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Alloy Steel[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Alloy Steel[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] |
Groove Length(mm) | - | 0.5 ~ 48 | 5 ~ 40 | 12 ~ 45 | 3 ~ 45 | 0.5 ~ 34 | 0.5 ~ 48 | 20 ~ 25 | 0.5 ~ 48 | 0.5 ~ 34 | 0.5 ~ 34 | 27 ~ 40 | 0.5 ~ 48 | 0.5 ~ 34 | 12 ~ 40 | 3 ~ 10 | - | 12 ~ 52 | - | - | 6 ~ 45 | 22 ~ 35 | 20 ~ 31 | 20 ~ 30 | 20 ~ 30 |
Coating Presence | None | None | None | Included | None | None | None | None | None | None | None | None | None | None | Included ~ None | None | None | Included | None | None | Included | None | None | - | - |
Groove Shape | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Straight | Helical | Helical | Straight | Spiral |
Base-Blade Availability | None | Included | None | None | None | Included | Included | None | Included | Included | Included | Included | None | None | None | None | None | None | - | - | None | None | None | - | - |
Tip Diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Large Tip Diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
[1.8-5/0.1mm Unit(s)][0.3-15.99/0.01mm Unit(s)][0.3-15.995/0.005mm Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy