(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
HSS Spiral Reamers - Straight/End Mill Shank, Hand Type, SPHR
EIKOSHA
General-purpose spiral reamer (HSS) with torsion blade that can be hand turned.
[Features]
· The shank has an angle and can be hand turned.
· The bite is long (angle set at 1°) and the cutting edge does not easily get damaged.
· Adopts a torsion blade with excellent cutting powder discharge.
[Applications]
· For general purpose finishing.
Days to Ship: | 8 Days or more |
---|
HSS Straight Reamers - Straight Shank, Chucking Type, SCR
EIKOSHA
General purpose type. The blade is short and the shank is long. For deep hole finishing, etc.
Days to Ship: | 8 Days or more |
---|
Carbide Straight Reamers - End Mill Shank, Mu Type
FPTOOLS
[Features]
· Easy tool management: As well as being suitable for high-precision drilling as the nominal dimensions are manufactured with 1 μm increments, 11,800 sizes are available for selection.
· Ultra-high precision: Tolerance of 0 to less than +1 μm is ideal for drilling ultra-precision holes.
· High durability: Excellent durability, maintaining precision over long periods of time.
· Application: General work materials.
Days to Ship: | 8 Days or more |
---|
HSS Spiral Reamers - Straight Shank, Tapered Pin Type, SPTPR
EIKOSHA
Spiral reamer for 1/50 tapered hole processing (HSS).
[Features]
· Shank has a square section that can also be used for turning by hand.
· Adoption of twisted blade allows appropriate disposal of chips.
Days to Ship: | 8 Days or more |
---|
Carbide Straight Reamers - Straight/End Mill Shank, CRM
OSG
Blade tip adopts carbide alloy material.
Days to Ship: | 8 Days or more |
---|
HSS Spiral Reamers - 1/10 Inch Tapered Shank, SPTR-F
EIKOSHA
Spiral reamer for 1/10 tapered hole (HSS).
[Features]
· Morse taper shank has been adopted for machinery.
· Adoption of a twisted blade allows appropriate disposal of chips.
[Applications]
· Ideal for machining receiving holes for 1/10 taper shafts.
Days to Ship: | 8 Days or more |
---|
Carbide Step Reamer, Custom Dimensions Type
MISUMI
[Features]
・Ideal for coaxial finishing of stepped holes.
Days to Ship: | 10 Days or more |
---|
Carbide Straight Reamers - End Mill Shank, Deep Hole Machining, C Series
FPTOOLS
[Features]
· Ultra-low price contributes to cost reductions.
· Carbide is used for the reamer, greatly reducing the price.
· It will help reduce the machining costs by the improvement of tool life and reduction of tool costs.
· Deep hole machining possible: Thinner shank diameter makes it possible to machine deep holes.
· The processing range can be expanded.
· High-precision: Precision equivalent to the best-selling carbide reamer "G-Series".
· Can be used with peace of mind
Days to Ship: | 8 Days or more |
---|
Carbide Straight Reamers - 2 Flute/4 Flute, Regular, Corner Radius Model
MISUMI
Reduces the number of steps in finishing of radius-shaped blind holes
Days to Ship: | 10 Days or more |
---|
Carbide Straight Reamers - 2 Flute/4 Flute, Regular, Corner C Model
MISUMI
Reduces the finishing steps of blind holes with C-shaped corners
Days to Ship: | 10 Days or more |
---|
Carbide Straight Reamers - Straight Shank, Taper Pin Type, CSTPR
EIKOSHA
Straight reamer for 1/50 tapered hole processing (carbide).
[Features]
· Compared with conventional high-speed steel, carbide material is adopted to improve the high rigidity and abrasion resistance.
· Provides excellent finish for high-hardness workpieces as well.
[Applications]
· For finish machining of 1/50 taper pin holes.
Days to Ship: | 8 Days or more |
---|
Carbide Spiral Reamers - Blind Hole Machining, KHR-4
KYOWASEIKO
Has a bottom blade ideal for blind hole machining.
Days to Ship: | 8 Days or more |
---|
Carbide Straight Reamers - End Mill Shank, 2 Flute/4 Flute, Long
MISUMI
Reduces the number of deep hole finishing steps
Days to Ship: | 10 Days or more |
---|
Carbide Spiral Reamers - End Mill Shank, SEC-HSPR
MISUMI
Achieves high speed during the hole finishing process
Days to Ship: | 8 Days or more |
---|
HSS Spiral Reamers - End Mill Shank, SPR
MISUMI
Reamers with high versatility are available at affordable prices
Days to Ship: | 8 Days or more |
---|
HSS Spiral Reamers - Straight Shank, 0.01 mm Increments, SPHR
MISUMI
Tooth gradient of 1° for smooth guidance.
Days to Ship: | 10 Days or more |
---|
Carbide Straight Reamers - Straight Shank, Pivot Type, CSRR-3
EIKOSHA
Carbide straight reamer ideal for small diameter machining.
[Features]
· The shank is thick compared to the blade length, making it excellent in high durability and rigidity.
· φ0.2-3 (0.2-3 mm diameter) types are available.
[Applications]
· Ideal for finish machining of ultra-small diameter holes.
Days to Ship: | 8 Days or more |
---|
HSS Spiral Reamers - Straight Shank, High Helical Flute, HH
FPTOOLS
Made using cobalt HSS for even longer cutting life. Also effective with thermally refined materials of 40 HRC or less.
Days to Ship: | 8 Days or more |
---|
HSS Straight Reamers - Straight Shank, Chucking Type, HC
FPTOOLS
Straight Shank Chucking Reamer.
Days to Ship: | 8 Days or more |
---|
HSS Straight Reamers - Tapered Shank, Taper Pin Type, TPR
MIERASEN
•Groove Shape: Straight
•Link Model: Tapered Link
•Feature: For finish taper pin hole.
•Work Material: Cast iron, carbon steel, alloy steel, tool steel, stainless steel and aluminum alloy.
•Material: High-Speed Steel (HSS)
Days to Ship: | 8 Days or more |
---|
HSS Spiral Reamers - Straight Shank, for Cast Iron and General Steel, SPHR
OKAZAKI
Cast iron and general steel hole finishing. Inch sizes are also available. Uses MCo material (cobalt high speed steel).
Days to Ship: | 8 Days or more |
---|
HSS Spiral Reamers - End Mill Shank, Pin Gate Type, PGR
EIKOSHA
Spiral reamer for gate hole machining (HSS).
[Features]
· For mold pin point gate hole drilling.
· A wide variety of tip rounding, blade length and angles are available.
Days to Ship: | 8 Days or more |
---|
HSS Spiral Reamers - Tapered Shank, Powder Metallurgy Type, HSPTR
EIKOSHA
[Features]
· A finishing reamer for 1/5 to 1/10 taper.
Days to Ship: | 8 Days or more |
---|
HSS Straight Reamers - Straight Shank, Hand Type, HR, 8-12 Flutes
TAIYO TOOL
•Groove Shape: Straight
•Link Model: Straight Link
Days to Ship: | 8 Days or more |
---|
HSS Straight Reamers - Morse Tapered Shank, Machine Type, MRT-MT
TAIYO TOOL
•Groove Shape: Straight
•Link Model: Morse Tapered Link
Days to Ship: | 8 Days or more |
---|
Carbide Straight Reamers - End Mill Shank, 2 Flute/4 Flute, Regular
MISUMI
Full lineup reduces drilling steps
Days to Ship: | 10 Days or more |
---|
Carbide Straight Reamers - 2 Flute/4 Flute, Long, Corner Radius Model
MISUMI
Ideal for finishing deep radius-shaped blind holes
Days to Ship: | 10 Days or more |
---|
Carbide Straight Reamers - 2 Flute/4 Flute, Long, Corner C Model
MISUMI
Ideal for finishing deep blind holes with C-shaped corners
Days to Ship: | 10 Days or more |
---|
Carbide Spiral Reamers - End Mill Shank, Bottom Blade
MISUMI
Spiral reamer bottom flute type for high-speed cutting
Days to Ship: | 8 Days or more |
---|
Carbide Straight Reamers - End Mill Shank, Flat Bottom Blade
MISUMI
Popular straight reamer with carbide bottom blade
Days to Ship: | 8 Days or more |
---|
Days to Ship: | 10 Days or more |
---|
Carbide Straight Reamers - End Mill Shank, Long
MISUMI
The long type is available also in extensive assortment of sizes
Days to Ship: | 10 Days or more |
---|
Carbide Straight Reamers - Non-Coated/TS Coated, High Hardness Steel Machining
MISUMI
Also available in a high-hardness steel machining version
Days to Ship: | 8 Days or more |
---|
Carbide Spiral Reamers - End Mill Shank, High Precision Tolerance
MISUMI
Version with high outer diameter tolerance accuracy to meets demanding hole accuracy requirements
Days to Ship: | 8 Days or more |
---|
Carbide Straight Reamers - Precision, P5SRM/P6SRM
MISUMI
Capable of finishing holes with cleaner surface roughness than a conventional reamer.
Days to Ship: | 10 Days or more |
---|
Carbide Straight Reamers - Pilot Hole Correction Boring Bit, BRB
MISUMI
If the hole pitch has an intersection or the inclination tolerance of the hole is demanding, the bend of the hole can be modified by using this product before finishing with the reamer.
Days to Ship: | 10 Days or more |
---|
HSS Straight Reamers - Straight Shank, 0.01 mm Increments
MISUMI
Hand reamer that can be selected in 0.01 mm increments
Days to Ship: | Same day or more |
---|
Show Stock Products
HSS Straight Reamers - Tapered Shank, 0.01 mm Increments
MISUMI
A Morse taper shank.
For complete product overview and details on HSS Straight Reamers - Tapered Shank, 0.01 mm Increments see the sections below:
Days to Ship: | 10 Days or more |
---|
HSS Spiral Reamers - Tapered Shank, 0.01 mm Increments, SPMR
MISUMI
Morse taper shank with a single angle of 45°.
Days to Ship: | 10 Days or more |
---|
HSS Spiral Reamers - High Helical Flute, 0.1 mm Increments, HHHR
MISUMI
High helix reduces cutting resistance.
Days to Ship: | 10 Days or more |
---|
HSS Spiral Reamers - High Helical Flute, 0.01 mm Increments, HHHR
MISUMI
High helix reduces cutting resistance.
Days to Ship: | 10 Days or more |
---|
HSS Spiral Reamers - Tapered Shank, 0.1 mm Increments, HHHRT
MISUMI
High helix reduces cutting resistance.
Days to Ship: | 8 Days or more |
---|
HSS Spiral Reamers - Tapered Shank, Machine Type, SPMRC
MISUMI
Now offering the frequently used standard sizes at affordable prices (C-Value)
Days to Ship: | 8 Days or more |
---|
HSS Spiral Reamers - Straight Shank, Hand Type, SPHRC
MISUMI
Now offering the frequently used standard sizes at affordable prices (C-Value)
Days to Ship: | 8 Days or more |
---|
Carbide Step Reamer, Custom Dimensions / Long Shank Type
MISUMI
[Features]
・Ideal for coaxial finishing of stepped holes.
Days to Ship: | 10 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Tool Diameter(mm) |
Link Model |
Work Material |
Groove Length(mm) |
Coating Presence |
Groove Shape |
Base-Blade Availability |
Tip Diameter |
Large Tip Diameter |
Radius R |
Corners |
|
| ||||||||||||||||||||||||||||||||||||||||||||
Brand | EIKOSHA | EIKOSHA | FPTOOLS | EIKOSHA | OSG | EIKOSHA | MISUMI | FPTOOLS | MISUMI | MISUMI | EIKOSHA | KYOWASEIKO | MISUMI | MISUMI | MISUMI | MISUMI | EIKOSHA | FPTOOLS | FPTOOLS | MIERASEN | OKAZAKI | EIKOSHA | EIKOSHA | TAIYO TOOL | TAIYO TOOL | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
Product Series | HSS Spiral Reamers - Straight/End Mill Shank, Hand Type, SPHR | HSS Spiral Reamers - Straight Shank, Tapered Pin Type, SPTPR | Carbide Straight Reamers - End Mill Shank, Deep Hole Machining, C Series | Carbide Straight Reamers - 2 Flute/4 Flute, Regular, Corner Radius Model | Carbide Straight Reamers - 2 Flute/4 Flute, Regular, Corner C Model | Carbide Straight Reamers - Straight Shank, Taper Pin Type, CSTPR | Carbide Straight Reamers - End Mill Shank, 2 Flute/4 Flute, Long | HSS Spiral Reamers - Straight Shank, 0.01 mm Increments, SPHR | Carbide Straight Reamers - Straight Shank, Pivot Type, CSRR-3 | HSS Spiral Reamers - Straight Shank, for Cast Iron and General Steel, SPHR | HSS Spiral Reamers - Tapered Shank, Powder Metallurgy Type, HSPTR | HSS Straight Reamers - Straight Shank, Hand Type, HR, 8-12 Flutes | HSS Straight Reamers - Morse Tapered Shank, Machine Type, MRT-MT | Carbide Straight Reamers - End Mill Shank, 2 Flute/4 Flute, Regular | Carbide Straight Reamers - 2 Flute/4 Flute, Long, Corner Radius Model | Carbide Straight Reamers - 2 Flute/4 Flute, Long, Corner C Model | Carbide Straight Reamers - End Mill Shank, Flat Bottom Blade | Carbide Straight Reamers - Non-Coated/TS Coated, High Hardness Steel Machining | Carbide Spiral Reamers - End Mill Shank, High Precision Tolerance | Carbide Straight Reamers - Pilot Hole Correction Boring Bit, BRB | HSS Spiral Reamers - Tapered Shank, 0.01 mm Increments, SPMR | HSS Spiral Reamers - High Helical Flute, 0.1 mm Increments, HHHR | HSS Spiral Reamers - High Helical Flute, 0.01 mm Increments, HHHR | HSS Spiral Reamers - Tapered Shank, 0.1 mm Increments, HHHRT | |||||||||||||||||||||
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more |
Same day or more
Show Stock Products | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more |
Tool Diameter(mm) | 1/4 ~ 20.2 | 1 ~ 32 | 0.5 ~ 10.009 | - | 0.3 ~ 13.05 | - | - | 2.91 ~ 12.1 | 0.4 ~ 15.995 | 0.4 ~ 15.995 | - | 1 ~ 6.03 | 0.3 ~ 5.995 | 3 ~ 10 | 1 ~ 13 | 2 ~ 30 | 0.2 ~ 3 | 6.5 | 1 ~ 14 | 13 | 3 ~ 30 | - | - | 1-1/2 ~ 51 | 1-5/8 ~ 80 | 0.3 ~ 5.995 | 0.4 ~ 5.995 | 0.4 ~ 5.995 | 3 ~ 10.01 | 3 ~ 10.01 | 0.3 ~ 15.99 | 0.3 ~ 5.99 | 1 ~ 10 | 1 ~ 13 | 0.5 ~ 5.9 | 1.8 ~ 5 | 0.5 ~ 30 | 2.95 ~ 30.02 | 3 ~ 30.02 | 2 ~ 14 | 2.01 ~ 13.99 | 4 ~ 30 | 8 ~ 16 | 2 ~ 12 | - |
Link Model | End Mill Link / Straight Link | Straight Link | End Mill Link | Straight Link | End Mill Link / Straight Link | Tapered Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | Straight Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | Straight Link | Straight Link | Straight Link | Straight Link | Tapered Link | Straight Link | End Mill Link | End Mill Link | Straight Link | Morse Tapered Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | Straight Link | Tapered Link | Tapered Link | Straight Link | Straight Link | Tapered Link | Tapered Link | Straight Link | End Mill Link |
Work Material | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Die Steel[○] / Alloy Steel[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | General Steel[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | General Steel[◎] / Aluminum[◎] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[◎] / Alloy Steel[◎] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Heat-Resistant Alloy[○] / Alloy Steel[◎] | General Steel[◎] / Cast Iron[◎] / Resin[○] / Die Steel[○] / Alloy Steel[◎] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] / Die Steel[○] / Alloy Steel[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Die Steel[○] / Alloy Steel[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Alloy Steel[○] | General Steel[◎] / Cast Iron[○] / Aluminum[◎] / Copper[◎] / Die Steel[○] / Alloy Steel[◎] | - | - | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / High-Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Aluminum[◎] |
Groove Length(mm) | 30 ~ 120 | 15 ~ 75 | 5 ~ 40 | 48 ~ 318 | - | 60 ~ 100 | - | 20 ~ 25 | 0.5 ~ 48 | 0.5 ~ 48 | 28 ~ 194 | - | 0.5 ~ 34 | 25 ~ 40 | 15 ~ 44 | 30 ~ 150 | 3 ~ 25 | 35 | 20 ~ 50 | - | 40 ~ 150 | 25 ~ 150 | 40 ~ 55 | 85 ~ 180 | 35 ~ 220 | 0.5 ~ 48 | 0.5 ~ 34 | 0.5 ~ 34 | 20 ~ 30 | 27 ~ 40 | 0.5 ~ 48 | 0.5 ~ 34 | 12 ~ 40 | 10 ~ 44 | 3 ~ 10 | - | 12 ~ 150 | 35 ~ 150 | 35 ~ 150 | 13 ~ 45 | 13 ~ 45 | 22 ~ 60 | 33 ~ 52 | 25 ~ 76 | - |
Coating Presence | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None |
Groove Shape | Spiral | Straight | Straight | Spiral | Straight | Spiral | Straight | Straight | Straight | Straight | Straight | Spiral | Straight | Spiral | Spiral | Spiral | Straight | Spiral | Straight | Straight | Spiral | Spiral | Spiral | Straight | Straight | Straight | Straight | Straight | Spiral | Straight | Straight | Straight | Straight | Spiral | Straight | Straight | Straight | Straight | Spiral | Spiral | Spiral | Spiral | Spiral | Spiral | Straight |
Base-Blade Availability | None | None | None | None | None | None | - | None | Included | Included | None | Included | Included | None | None | None | None | None | None | None | None | Included | None | None | None | Included | Included | Included | Included | Included | None | None | None | None | None | None | None | None | None | None | None | None | None | None | - |
Tip Diameter | - | - | - | 1.9 ~ 29.7 | - | 10.5 ~ 25 | - | - | - | - | 1 ~ 13 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Large Tip Diameter | - | - | - | 2.86 ~ 36.06 | - | 16 ~ 34.5 | - | - | - | - | 1.46 ~ 16.74 | - | - | - | - | - | - | - | - | - | - | 1.43 ~ 15.3 | 12.2 ~ 30.2 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Radius R | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.5 ~ 2.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Corners | - | - | - | 1/50 | - | 1/10 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 1゚ ~ 5゚ | 1/5T ~ 1/10T | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
[1.8-5/0.1mm Unit(s)][0.3-15.99/0.01mm Unit(s)][0.3-15.995/0.005mm Unit(s)]
[0.5-48/0.5mm Unit(s)][3-10/1mm Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy