(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
HSS Straight Reamers - Straight Shank, Chucking Type, SCR
EIKOSHA
General purpose type. The blade is short and the shank is long. For deep hole finishing, etc.
Days to Ship: | 8 Days or more |
---|
HSS Straight Reamers - Tapered Shank, Machine Type, MR, 6-16 Flutes
EIKOSHA
A general-purpose straight reamer (HSS) with straight edge and Morse taper shank shape for machines.
[Features]
· Morse taper shank is adopted for machine use.
[Applications]
· For general purpose finishing.
Days to Ship: | 8 Days or more |
---|
Carbide Straight Reamers - End Mill Shank, Mu Type
FPTOOLS
[Features]
· Easy tool management: As well as being suitable for high-precision drilling as the nominal dimensions are manufactured with 1 μm increments, 11,800 sizes are available for selection.
· Ultra-high precision: Tolerance of 0 to less than +1 μm is ideal for drilling ultra-precision holes.
· High durability: Excellent durability, maintaining precision over long periods of time.
· Application: General work materials.
Days to Ship: | 8 Days or more |
---|
HSS Straight Reamers - Long Machine Type, Deep Hole Machining, LMR
EIKOSHA
Long Type, Deep Hole Use, Morse Taper Shank
Days to Ship: | 8 Days or more |
---|
Carbide Straight Reamers - Straight Shank, Solid Type, CSR
EIKOSHA
[Features]
· Excellent oxidation resistance, abrasion resistance, and heat resistance; ideal for high speed machining.
Days to Ship: | 8 Days or more |
---|
HSS Straight Reamers - Morse Tapered Hand Type, MTR-F
EIKOSHA
Straight reamer (HSS) for morse taper holes for finishing.
[Features]
· Shank has a square section that can also be used for turning by hand.
· Seven standards are available.
[Applications]
· Ideal for finish machining of MT0 to MT6 holes.
Days to Ship: | 8 Days or more |
---|
HSS Spiral Reamers - Blind Hole Machining, TiN Coated, ERR-TiN
EIKOSHA
[Features]
· A reamer exclusively for blind holes.
· TiN coating is added to powdered HSS for a long service life.
Days to Ship: | 8 Days or more |
---|
Carbide Straight Reamers - Straight Shank, Chucking Type, CSCRS
EIKOSHA
General purpose type. The blade is short and the shank is long. For deep hole finishing, etc.
Days to Ship: | 8 Days or more |
---|
Carbide Spiral Reamers - Straight Shank, for Pin Gate Drilling, CSPGR
EIKOSHA
Spiral reamer (carbide) for gate drilling.
[Features]
· For mold pin point gate hole drilling.
· A wide variety of tip rounding, blade length and angles are available.
[Applications]
· Finishing of pin gate holes.
Days to Ship: | 8 Days or more |
---|
HSS Straight Reamers - Morse Tapered Machine Type, MTRT-RF
EIKOSHA
Straight reamer for Morse taper holes, convenient for rough finishing (HSS).
[Features]
· Morse taper shank has been adopted for machinery and the blade tip has been nick-processed, making it ideal for rough finishing.
· Seven standards are available.
[Applications]
· Ideal for medium-finish machining of MT0 to MT6 holes.
Days to Ship: | 8 Days or more |
---|
HSS Spiral Reamers - 1/10 Inch Tapered Shank, SPTR-F
EIKOSHA
Spiral reamer for 1/10 tapered hole (HSS).
[Features]
· Morse taper shank has been adopted for machinery.
· Adoption of a twisted blade allows appropriate disposal of chips.
[Applications]
· Ideal for machining receiving holes for 1/10 taper shafts.
Days to Ship: | 8 Days or more |
---|
Carbide Straight Reamers - End Mill Shank, General Purpose, G Series
FPTOOLS
[Features]
· The most universally usable reamer among all series of carbide reamers.
· Approximately 5 to 10 times greater durability than conventional HSS reamers, maintaining its precision for long periods of time.
· Processing hole precision is also superior to the HSS reamer, allowing use at higher cutting speed and feeding speed.
· Because the pitch is 0.005 mm, there are no breaks between sizes and negative tolerance hole drilling is also possible.
Days to Ship: | 7 Days or more |
---|
Carbide Spiral Reamers - End Mill Shank, Blind Hole Use, CE Series
FPTOOLS
Complete blind hole drilling is possible. Newly developed special blade coating. End mill shank is adopted.
* Product name was changed from SH to CE. Although there is no change in the standards and price, the label of the delivered product may be that of the former SH series.
Days to Ship: | 8 Days or more |
---|
HSS Spiral Reamers - End Mill Shank, Short, HB
FPTOOLS
[Features]
· Capable of high-efficiency and high-precision machining thanks to its high-rigidity groove shape and short blade length.
· As the bite length is short, it is capable of processing blind holes.
· The cobalt HSS has been coated with a newly developed special coating featuring coating hardness of 3,700 Hv, providing excellent abrasion resistance.
· End mill shank is adopted.
Days to Ship: | 8 Days or more |
---|
HSS Straight Reamers - Straight Shank, Chucking Type, HC
FPTOOLS
Straight Shank Chucking Reamer.
Days to Ship: | 8 Days or more |
---|
HSS Spiral Reamers - Tapered Shank, Machine Type, SPMR
EIKOSHA
A spiral machine reamer.
[Features]
· Morse taper shank is adopted for machine use.
· Adopts a torsion blade with excellent cutting powder discharge.
[Applications]
· For general purpose finishing.
Days to Ship: | 8 Days or more |
---|
HSS Spiral Reamers - Straight/End Mill Shank, High Helical Flute, HHHR
EIKOSHA
High-speed steel high-torsion spiral reamer.
[Features]
· Excellent in surface roughness and cutting powder processing thanks to the adoption of 60° torsion.
· Reduces cutting resistance.
[Applications]
· Convenient for general purpose finishing.
Days to Ship: | 8 Days or more |
---|
Carbide Spiral Reamers - End Mill Shank, Blind Hole Machining, CER
OKAZAKI
A solid type. A reamer for complete blind holes that's capable of cleanly processing the bottom surface. End mill shank is adopted.
Days to Ship: | 12 Days or more |
---|
Carbide Spiral Reamers - Blind Hole Machining, CHRSM, Short
OKAZAKI
A solid type. Carbide Helical Reamer (CHR/CHRM) Short Type
Days to Ship: | 8 Days or more |
---|
HSS Straight Reamers - End Mill Shank, Half Sprue Type, SURH
EIKOSHA
A straight reamer for spool hole machining (HSS).
[Features]
· Various angles are available to support processing of various angles.
· As it has a half-moon shape, it's easy to process chips.
[Applications]
· Optimal as a tool for removing grime from inside spool bushing, etc.
· Convenient for half-moon shaped die spool hole processing.
Days to Ship: | 8 Days or more |
---|
Carbide Spiral Reamers - for Stainless Steel, TiAlN Coated, CSUSR-A
EIKOSHA
[Features]
· Ideal shape for stainless steel and other difficult-to-cut materials.
· Heat-Resistant Coating
· Abrasion Resistant Material
· Right torsion
Days to Ship: | 7 Days or more |
---|
Carbide Straight Reamers - End Mill Shank, TiCN2 Coated, CSR-C
EIKOSHA
TiCN647 coating adopted. Prevents welding and improves the roughness of the finished surface
Days to Ship: | 8 Days or more |
---|
Carbide Spiral Reamers - TiCN2 Coated, CSPR-C
EIKOSHA
Carbide spiral reamer with high versatility and excellent wear resistance.
[Features]
· Features TiCN coating that prevents welding and improves roughness of the finishing surface.
· Uses a twisted blade with excellent chip discharge performance.
[Applications]
· Ideal for machining a wide range of work materials from nonferrous metal to carbon steel.
Days to Ship: | 8 Days or more |
---|
Carbide Straight Reamers - for Aluminum, DLC Coated, CSR-DLC
EIKOSHA
DLC coating with low coefficient of friction adopted, for aluminum and nonferrous metals
Days to Ship: | 8 Days or more |
---|
Carbide Spiral Reamers - Straight Shank, Blind Hole Machining, CSOER
EIKOSHA
Right torsion reamer for blind holes with oil hole and bottom blade
Days to Ship: | 8 Days or more |
---|
Carbide Straight Reamers - Straight Shank, Pivot Type, CSRR-3
EIKOSHA
Carbide straight reamer ideal for small diameter machining.
[Features]
· The shank is thick compared to the blade length, making it excellent in high durability and rigidity.
· φ0.2-3 (0.2-3 mm diameter) types are available.
[Applications]
· Ideal for finish machining of ultra-small diameter holes.
Days to Ship: | 8 Days or more |
---|
Carbide Straight Reamers - Straight Shank, CSRM, Medium
EIKOSHA
General purpose type. Wear-resistant carbide K type adopted
Days to Ship: | 8 Days or more |
---|
Carbide Straight Reamers - Straight Shank, Taper Pin Type, CSTPR
EIKOSHA
Straight reamer for 1/50 tapered hole processing (carbide).
[Features]
· Compared with conventional high-speed steel, carbide material is adopted to improve the high rigidity and abrasion resistance.
· Provides excellent finish for high-hardness workpieces as well.
[Applications]
· For finish machining of 1/50 taper pin holes.
Days to Ship: | 8 Days or more |
---|
HSS Spiral Reamers - Machine Chucking Type, TiN Coated, MCR-TiN
EIKOSHA
Short type cobalt HSS and TiN coating for long service life
Days to Ship: | 8 Days or more |
---|
HSS Straight Reamers - Long Hand Type, Deep Hole Machining, LHR
EIKOSHA
Long Type, Deep Hole Use, for Improved Guidance, 1° Bite Gradient
Days to Ship: | 8 Days or more |
---|
HSS Spiral Reamers - Long Hand Type, Deep Hole Machining, SPLHR
EIKOSHA
Long Type, Deep Hole Use, for Improved Guidance, 1° Bite Gradient
Days to Ship: | 8 Days or more |
---|
HSS Spiral Reamers - Straight Shank, Chucking Type, SPSCR
EIKOSHA
General purpose type. The blade is short and the shank is long. For deep hole finishing, etc.
Days to Ship: | 8 Days or more |
---|
HSS Spiral Reamers - Morse Tapered Shank, Long Machine Type, SPLMR
EIKOSHA
Long Type, Deep Hole Use, Morse Taper Shank
Days to Ship: | 8 Days or more |
---|
HSS Straight Reamers - Tapered Shank, Tapered Pin Type, TPR
EIKOSHA
For 1/48, 1/50 Taper Pin
For complete product overview and details on HSS Straight Reamers - Tapered Shank, Tapered Pin Type, TPR see the sections below:
Days to Ship: | 8 Days or more |
---|
HSS Spiral Reamers - Straight Shank, Helical Tapered Pin Type, HTPR
EIKOSHA
Spiral reamer for 1/48 and 1/50 tapered hole processing (HSS).
[Features]
· A torsion resistant type for 1/48 and 1/50 taper pins.
· By adopting strong torsion, surface roughness and chip disposal are improved and cutting resistance is reduced.
Days to Ship: | 8 Days or more |
---|
HSS Straight Reamers - Tapered Shank, Tapered Pin Type, TPRT
EIKOSHA
Straight reamer for 1/50 tapered hole processing (HSS).
[Features]
· Morse taper shank has been adopted for machinery.
[Applications]
· Ideal for finish machining of 1/50 taper pin holes.
Days to Ship: | 8 Days or more |
---|
HSS Spiral Reamers - End Mill Shank, Sprue Type, SUR
EIKOSHA
For mold spool hole drilling
For complete product overview and details on HSS Spiral Reamers - End Mill Shank, Sprue Type, SUR see the sections below:
Days to Ship: | 8 Days or more |
---|
Carbide Spiral Reamers - End Mill Shank, FP Platinum
FPTOOLS
[Features]
· Reamer shape ideal for high-speed machining: Achieves high-precision and high-speed machining thanks to its high torsion, highly rigid blade shape and eccentric chamfer blade.
· Special coating: Features a special coating with an excellent oxidation resistance temperature and friction coefficient. This coating helps improve the tool service life and allows smooth cutting chip processing.
· High-precision end mill shank: Shank tolerance of h5 is adopted.
· Effective for machining stainless steel: General-purpose F.P. Platinum Reamer can even be used for high-speed machining of stainless steel.
Days to Ship: | 8 Days or more |
---|
Carbide Straight Reamers - Straight Shank, for Burnishing, B Series
FPTOOLS
Enables mirror finish of machined holes. Machining is possible without following pilot holes.
Days to Ship: | 8 Days or more |
---|
Carbide Straight Reamers - End Mill Shank, Deep Hole Machining, C Series
FPTOOLS
[Features]
· Ultra-low price contributes to cost reductions.
· Carbide is used for the reamer, greatly reducing the price.
· It will help reduce the machining costs by the improvement of tool life and reduction of tool costs.
· Deep hole machining possible: Thinner shank diameter makes it possible to machine deep holes.
· The processing range can be expanded.
· High-precision: Precision equivalent to the best-selling carbide reamer "G-Series".
· Can be used with peace of mind
Days to Ship: | 8 Days or more |
---|
Carbide Spiral Reamers - High Speed Use, Deep Hole Machining, H Series
FPTOOLS
[Features]
· Cutting speed can be increased by 50% compared to carbide straight blade types.
· Ideal for deep drilling: Long neck section.
· Excellent anterior chip discharge: 30° torsion, left
Days to Ship: | 8 Days or more |
---|
HSS Straight Reamers - End Mill Shank, Gold Type, TiN Coated
FPTOOLS
[Features]
· Reduces the processing cost. It boasts tool life about twice that of HSS machines and chucking reamers.
· Furthermore, it also boasts a super-low price with a discount of approximately 50%.
· With TiN coating, cutting speed and durability are at least doubled compared to conventional HSS machines and chucking reamers.
· Outstanding circularity and surface roughness.
· Shank diameter is endmill shank type.
Days to Ship: | 8 Days or more |
---|
HSS Spiral Reamers - End Mill Shank, Gold, HG-S
FPTOOLS
[Features]
· Reduces the processing cost. It boasts tool life about twice that of HSS machines and chucking reamers.
· Furthermore, it also boasts a super-low price with a discount of approximately 50%.
· With TiN coating, cutting speed and durability are at least doubled compared to conventional HSS machines and chucking reamers.
· Outstanding circularity and surface roughness.
· Shank diameter is endmill shank type.
Days to Ship: | 8 Days or more |
---|
HSS Straight Reamers - Straight/End Mill Shank, Hand Type
FPTOOLS
[Features]
· A hand reamer is used to finish the bore and the tip bite section is given a slight gradient (about 1 degree) to improve the guidance.
· Blade diameter tolerance is unique at +0.005/0(J5).
Days to Ship: | 8 Days or more |
---|
HSS Spiral Reamers - Straight/End Mill Shank, Hand Type, HR-S
FPTOOLS
[Features]
· A hand reamer is used to finish the bore and the tip bite section is given a slight gradient (about 1 degree) to improve the guidance.
· Blade diameter tolerance is unique to the manufacturer at +0.005/0(J5).
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Tool Diameter(mm) |
Link Model |
Work Material |
Groove Length(mm) |
Coating Presence |
Groove Shape |
Base-Blade Availability |
Tip Diameter |
Large Tip Diameter |
Radius R |
Corners |
Brand | EIKOSHA | EIKOSHA | FPTOOLS | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | FPTOOLS | FPTOOLS | FPTOOLS | FPTOOLS | EIKOSHA | EIKOSHA | OKAZAKI | OKAZAKI | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | EIKOSHA | FPTOOLS | FPTOOLS | FPTOOLS | FPTOOLS | FPTOOLS | FPTOOLS | FPTOOLS | FPTOOLS |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | HSS Straight Reamers - Tapered Shank, Machine Type, MR, 6-16 Flutes | HSS Straight Reamers - Long Machine Type, Deep Hole Machining, LMR | HSS Spiral Reamers - Blind Hole Machining, TiN Coated, ERR-TiN | Carbide Straight Reamers - Straight Shank, Chucking Type, CSCRS | Carbide Spiral Reamers - Straight Shank, for Pin Gate Drilling, CSPGR | Carbide Straight Reamers - End Mill Shank, General Purpose, G Series | Carbide Spiral Reamers - End Mill Shank, Blind Hole Use, CE Series | HSS Spiral Reamers - Straight/End Mill Shank, High Helical Flute, HHHR | Carbide Spiral Reamers - End Mill Shank, Blind Hole Machining, CER | HSS Straight Reamers - End Mill Shank, Half Sprue Type, SURH | Carbide Spiral Reamers - for Stainless Steel, TiAlN Coated, CSUSR-A | Carbide Straight Reamers - End Mill Shank, TiCN2 Coated, CSR-C | Carbide Straight Reamers - for Aluminum, DLC Coated, CSR-DLC | Carbide Spiral Reamers - Straight Shank, Blind Hole Machining, CSOER | Carbide Straight Reamers - Straight Shank, Pivot Type, CSRR-3 | Carbide Straight Reamers - Straight Shank, Taper Pin Type, CSTPR | HSS Spiral Reamers - Machine Chucking Type, TiN Coated, MCR-TiN | HSS Straight Reamers - Long Hand Type, Deep Hole Machining, LHR | HSS Spiral Reamers - Long Hand Type, Deep Hole Machining, SPLHR | HSS Spiral Reamers - Morse Tapered Shank, Long Machine Type, SPLMR | HSS Spiral Reamers - Straight Shank, Helical Tapered Pin Type, HTPR | HSS Straight Reamers - Tapered Shank, Tapered Pin Type, TPRT | Carbide Straight Reamers - Straight Shank, for Burnishing, B Series | Carbide Straight Reamers - End Mill Shank, Deep Hole Machining, C Series | Carbide Spiral Reamers - High Speed Use, Deep Hole Machining, H Series | HSS Straight Reamers - End Mill Shank, Gold Type, TiN Coated | HSS Spiral Reamers - Straight/End Mill Shank, Hand Type, HR-S | ||||||||||||||||||
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 7 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 12 Days or more | 8 Days or more | 8 Days or more | 7 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Tool Diameter(mm) | 1 ~ 32 | 2.95 ~ 85 | 0.5 ~ 10.009 | 1/2 ~ 50 | 0.4 ~ 20.05 | - | 2.95 ~ 50 | 1 ~ 30 | - | - | - | 0.2 ~ 12.1 | 1 ~ 14.05 | 1 ~ 12.095 | 1 ~ 14 | 3 ~ 60 | 2.1 ~ 16.05 | 3 ~ 12 | 2.95 ~ 12.05 | - | 0.5 ~ 12.05 | 0.8 ~ 12.05 | 0.8 ~ 12.05 | 0.5 ~ 12.05 | 2.95 ~ 16 | 0.2 ~ 3 | 0.8 ~ 12.05 | - | 2.5 ~ 9 | 1/2 ~ 26 | 3 ~ 14 | 1/2 ~ 25 | 5 ~ 30 | - | - | - | - | 2.95 ~ 12.005 | 0.9 ~ 14 | 2.91 ~ 12.1 | 1 ~ 15.5 | 1 ~ 14.1 | 1 ~ 14.1 | 0.59 ~ 15.2 | 14.5 |
Link Model | Straight Link | Tapered Link | End Mill Link | Tapered Link | Straight Link | Straight Link | End Mill Link | Straight Link | Straight Link | Tapered Link | Tapered Link | End Mill Link | End Mill Link | End Mill Link | Straight Link | Tapered Link | End Mill Link / Straight Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Tapered Link | Straight Link | Straight Link | Tapered Link | End Mill Link | End Mill Link | Straight Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link / Straight Link | Straight Link |
Work Material | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[◎] | Alloy Steel[○] | Alloy Steel[◎] | Alloy Steel[○] | Alloy Steel[◎] | Alloy Steel[◎] | Alloy Steel[◎] | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[◎] | Alloy Steel[◎] | Alloy Steel[◎] | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[◎] | Alloy Steel[◎] | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[◎] | Alloy Steel[◎] | Alloy Steel[○] | Alloy Steel[◎] | Alloy Steel[◎] | Alloy Steel[◎] | Alloy Steel[◎] | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[◎] | Alloy Steel[○] | Alloy Steel[◎] | Alloy Steel[◎] | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[○] | Alloy Steel[○] |
Groove Length(mm) | 15 ~ 75 | 35 ~ 215 | 5 ~ 40 | 100 ~ 450 | 4 ~ 80 | 65 ~ 205 | 16 ~ 30 | 15 ~ 75 | 25 ~ 60 | 65 ~ 205 | 60 ~ 100 | 3 ~ 45 | 5 ~ 30 | 12 ~ 30 | 20 ~ 50 | 35 ~ 190 | 15 ~ 45 | 20 ~ 31 | 22 ~ 35 | 60 ~ 160 | 6 ~ 45 | 12 ~ 45 | 15 ~ 45 | 6 ~ 45 | 16 ~ 30 | 3 ~ 25 | 15 ~ 80 | 28 ~ 194 | 15 ~ 36 | 50 ~ 250 | 80 ~ 200 | 20 ~ 65 | 120 ~ 300 | 163 | 28 ~ 318 | 63 ~ 335 | 60 ~ 160 | 15 ~ 40 | 20 ~ 70 | 20 ~ 25 | 8 ~ 45 | 20 ~ 85 | 20 ~ 85 | 12 ~ 95 | 90 |
Coating Presence | None | None | None | None | None | None | Included | None | None | None | None | None | Included | Included | None | None | None | None | None | None | Included | Included | Included | Included | None | None | None | None | Included | None | None | None | None | None | None | None | None | Included | None | None | None | Included | Included | None | None |
Groove Shape | Straight | Straight | Straight | Straight | Straight | Straight | Spiral | Straight | Spiral | Straight | Spiral | Straight | Spiral | Spiral | Straight | Spiral | Helical | Spiral | Helical | Straight | Spiral | Straight | Spiral | Straight | Spiral | Straight | Straight | Straight | Spiral | Straight | Spiral | Spiral | Spiral | Straight | Helical | Straight | Spiral | Spiral | Straight | Straight | Spiral | Straight | Spiral | Straight | Spiral |
Base-Blade Availability | None | None | None | None | None | None | Included | None | None | None | None | None | Included | None | None | None | None | Included | None | None | None | None | None | None | Included | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None |
Tip Diameter | - | - | - | - | - | 6.547 ~ 54.388 | - | - | - | 6.297 ~ 54.13 | 10.5 ~ 25 | - | - | - | - | - | - | - | - | 1 ~ 5 | - | - | - | - | - | - | - | 1 ~ 13 | - | - | - | - | - | 9.5 | 1 ~ 30 | 3 ~ 40 | 2 ~ 10 | - | - | - | - | - | - | - | - |
Large Tip Diameter | - | - | - | - | - | 9.93 ~ 65.076 | - | - | 1.42 ~ 9.01 | 9.68 ~ 64.819 | 16 ~ 34.5 | - | - | - | - | - | - | - | - | 2.04 ~ 32.99 | - | - | - | - | - | - | - | 1.46 ~ 16.74 | - | - | - | - | - | 12.66 | 1.46 ~ 36.06 | 4.16 ~ 46.3 | 3.04 ~ 37.99 | - | - | - | - | - | - | - | - |
Radius R | - | - | - | - | - | - | - | - | 0.5 ~ 2.5 | - | - | - | 1 ~ 2.5 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Corners | - | - | - | - | - | 1/19.002 ~ 1/20.047 | - | - | 1 ~ 5 | 1/19.002 ~ 1/20.047 | 1/10 | - | - | - | - | - | - | - | - | 1゚ ~ 10゚ | - | - | - | - | - | - | - | - | - | - | - | - | - | 1/50 | 1/50 | 1/50 | 1 ~ 10 | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy