(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Screw Hole Related Tools(Page2)

Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.

Search by specifying the lower class category

Days to Ship
  • All
  • Same day
  • 6 Days or Less
  • 8 Days or Less
  • 9 Days or Less
  • 10 Days or Less
  • 11 Days or Less
  • 12 Days or Less
  • 13 Days or Less
  • 14 Days or Less
  • 16 Days or Less
Brand
Product Series
Days to Ship
Thread Types
Thread Size (Nominal)
Pitch (P), Thread Count(mm)
Number of Chamfered Threads (Lcf)
Tool Material Type
Work Material
Tap Model
Bore Model
Coating Presence
Coating Type
Overall Length (L)(mm)

    Taper Pipe Taps - High Speed Steel, for Difficult-to-Cut Materials, Short Screw, CPM-S-TPT

      Forming Taps - TiN Coated, Grooveless, Long Shank, TIN-LT-NRT

        Forming Taps - VP New Roll, Grooveless, Long Shank, VP-LT-NRT

          Threading Tools - High Speed Steel, Long Shank, EX-MCT

            Threading Tools - Tap Remover Plus, Regular

              Threading Tools - Tap Remover Plus, Long

                Threading Tools - Broken Tap Removal Tool Set

                  Forming Taps - High Speed Steel, Carbon Coated, IT-TF-C

                    Round Threading Dies - Steel, Solid Type, Parallel Thread, NSP

                      Threading Tools - Drill Set, Hand Tap, HTD

                        Spiral Flute Taps - For Titanium Alloys, ZET-B

                          Spiral Flute Taps - Plus Series, High Speed Steel, +SP (N+SP)

                            Spiral Point Taps - for High Carbon Steels, Through Hole Use, HC+PO/HC-PO

                              Hand Taps - Carbide, for Cast Iron, N-CT FC

                                Spiral Point Taps - Carbide, TiAlN Coated, UH-CT

                                  Spiral Flute Taps - General Purpose SM, High Speed Steel, EX-SFT-SM

                                    Taper Pipe Taps - High Speed Steel, Interrupted Threads, EX-IRT-PT

                                      Round Threading Dies - Solid Type, Steel, Taper Thread, TPD-S-PT

                                        Round Threading Dies - Alloy High Speed Steel, General Thread, RD-S

                                          Spiral Flute Taps - Model A Series, Spiral Fluted, Long Shank, A-LT-SFT

                                            Spiral Point Taps - High Speed Steel, Long Shank, A-LT-POT, Model A Series

                                              Threading Tools - Magnetic Drill Tap, MTP-150

                                                Threading Tools - Tap Die Repair Tool Set

                                                  Threading Tools - Re-Threading Die Set, Hexagonal, Metric Coarse Screw

                                                    Spiral Flute Tap (HSSE)

                                                      Thread Mills - Carbide, TiAlN Coated, Internal Metric Thread, MINMT

                                                        Forming Taps - High Speed Steel, TiN Coated, G-ROT

                                                          Spiral Flute Taps - Carbide, SEC-SPFT

                                                            Spiral Flute Taps - High Speed Steel, M-SPFT

                                                              Spiral Flute Taps - High Speed Steel, TiN Coated, M-SPFT

                                                                Spiral Flute Taps - High Speed Steel, SPFT

                                                                  Spiral Point Taps - High Speed Steel, TiN Coated, Regular/Long Shank

                                                                    Spiral Point Taps - High Speed Steel, Through Hole Use

                                                                      Hand Taps - Carbide, SEC-HT

                                                                      • New Products

                                                                      Spiral Point Taps - High Speed Steel, MT Series, MT-PTAP

                                                                        Spiral Flute Taps - T Spiral Tap, High Speed Steel, TSP

                                                                          Hand Taps - Carbide, TiCN Coated, EHT

                                                                            Forming Taps - High Speed Steel, Oxidized, TFST

                                                                              G Spiral Tap GSP

                                                                                Forming Taps - Blind Hole Machining, Long Shank, TFLL

                                                                                  G Spiral Tap for Deep Holes in Stainless Steel GSPS

                                                                                    Forming Taps - High Speed Steel, TFL

                                                                                      Forming Taps - Blind Hole Machining, Long Shank, TFSTL

                                                                                        Forming Taps - High Speed Steel, TFS

                                                                                          Threading Tools - Side-Grip External Repair Tool

                                                                                          Brand

                                                                                          OSG

                                                                                          OSG

                                                                                          OSG

                                                                                          OSG

                                                                                          EIKOSHA

                                                                                          EIKOSHA

                                                                                          Trusco Nakayama

                                                                                          TANOI

                                                                                          SKC

                                                                                          ISHIHASHI

                                                                                          YAMAWA

                                                                                          YAMAWA

                                                                                          YAMAWA

                                                                                          YAMAWA

                                                                                          YAMAWA

                                                                                          OSG

                                                                                          OSG

                                                                                          OSG

                                                                                          OSG

                                                                                          OSG

                                                                                          OSG

                                                                                          NEWSTRONG

                                                                                          LIGHTSEIKI

                                                                                          Trusco Nakayama

                                                                                          ESCO

                                                                                          MISUMI

                                                                                          MISUMI

                                                                                          MISUMI

                                                                                          MISUMI

                                                                                          MISUMI

                                                                                          MISUMI

                                                                                          MISUMI

                                                                                          MISUMI

                                                                                          MISUMI

                                                                                          MISUMI

                                                                                          Nachi-Fujikoshi

                                                                                          Nachi-Fujikoshi

                                                                                          Nachi-Fujikoshi

                                                                                          Nachi-Fujikoshi

                                                                                          Nachi-Fujikoshi

                                                                                          Nachi-Fujikoshi

                                                                                          Nachi-Fujikoshi

                                                                                          Nachi-Fujikoshi

                                                                                          Nachi-Fujikoshi

                                                                                          NOGA JAPAN

                                                                                          Product Series

                                                                                          Taper Pipe Taps - High Speed Steel, for Difficult-to-Cut Materials, Short Screw, CPM-S-TPT

                                                                                          Forming Taps - TiN Coated, Grooveless, Long Shank, TIN-LT-NRT

                                                                                          Forming Taps - VP New Roll, Grooveless, Long Shank, VP-LT-NRT

                                                                                          Threading Tools - High Speed Steel, Long Shank, EX-MCT

                                                                                          Threading Tools - Tap Remover Plus, Regular

                                                                                          Threading Tools - Tap Remover Plus, Long

                                                                                          Threading Tools - Broken Tap Removal Tool Set【5-7 Pieces Per Package】

                                                                                          Forming Taps - High Speed Steel, Carbon Coated, IT-TF-C

                                                                                          Round Threading Dies - Steel, Solid Type, Parallel Thread, NSP

                                                                                          Threading Tools - Drill Set, Hand Tap, HTD【21 Pieces Per Package】

                                                                                          Spiral Flute Taps - For Titanium Alloys, ZET-B

                                                                                          Spiral Flute Taps - Plus Series, High Speed Steel, +SP (N+SP)

                                                                                          Spiral Point Taps - for High Carbon Steels, Through Hole Use, HC+PO/HC-PO

                                                                                          Hand Taps - Carbide, for Cast Iron, N-CT FC

                                                                                          Spiral Point Taps - Carbide, TiAlN Coated, UH-CT

                                                                                          Spiral Flute Taps - General Purpose SM, High Speed Steel, EX-SFT-SM

                                                                                          Taper Pipe Taps - High Speed Steel, Interrupted Threads, EX-IRT-PT

                                                                                          Round Threading Dies - Solid Type, Steel, Taper Thread, TPD-S-PT

                                                                                          Round Threading Dies - Alloy High Speed Steel, General Thread, RD-S

                                                                                          Spiral Flute Taps - Model A Series, Spiral Fluted, Long Shank, A-LT-SFT

                                                                                          Spiral Point Taps - High Speed Steel, Long Shank, A-LT-POT, Model A Series

                                                                                          Threading Tools - Magnetic Drill Tap, MTP-150

                                                                                          Threading Tools - Tap Die Repair Tool Set【14-59 Pieces Per Package】

                                                                                          Threading Tools - Re-Threading Die Set, Hexagonal, Metric Coarse Screw【10 Pieces Per Package】

                                                                                          Spiral Flute Tap (HSSE)

                                                                                          Thread Mills - Carbide, TiAlN Coated, Internal Metric Thread, MINMT

                                                                                          Forming Taps - High Speed Steel, TiN Coated, G-ROT【5 Pieces Per Package】

                                                                                          Spiral Flute Taps - Carbide, SEC-SPFT

                                                                                          Spiral Flute Taps - High Speed Steel, M-SPFT【5 Pieces Per Package】

                                                                                          Spiral Flute Taps - High Speed Steel, TiN Coated, M-SPFT【1-5 Pieces Per Package】

                                                                                          Spiral Flute Taps - High Speed Steel, SPFT【10 Pieces Per Package】

                                                                                          Spiral Point Taps - High Speed Steel, TiN Coated, Regular/Long Shank【1-5 Pieces Per Package】

                                                                                          Spiral Point Taps - High Speed Steel, Through Hole Use【10 Pieces Per Package】

                                                                                          Hand Taps - Carbide, SEC-HT

                                                                                          Spiral Point Taps - High Speed Steel, MT Series, MT-PTAP

                                                                                          Spiral Flute Taps - T Spiral Tap, High Speed Steel, TSP

                                                                                          Hand Taps - Carbide, TiCN Coated, EHT

                                                                                          Forming Taps - High Speed Steel, Oxidized, TFST

                                                                                          G Spiral Tap GSP

                                                                                          Forming Taps - Blind Hole Machining, Long Shank, TFLL

                                                                                          G Spiral Tap for Deep Holes in Stainless Steel GSPS

                                                                                          Forming Taps - High Speed Steel, TFL

                                                                                          Forming Taps - Blind Hole Machining, Long Shank, TFSTL

                                                                                          Forming Taps - High Speed Steel, TFS

                                                                                          Threading Tools - Side-Grip External Repair Tool

                                                                                          Days to Ship 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 9 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 9 Days or more 8 Days or more 8 Days or more 9 Days or more 10 Days or more Same day or more

                                                                                          Show Stock Products

                                                                                          8 Days or more 8 Days or more Same day or more

                                                                                          Show Stock Products

                                                                                          8 Days or more 8 Days or more 8 Days or more Same day or more

                                                                                          Show Stock Products

                                                                                          8 Days or more 6 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more
                                                                                          Thread TypesPipe TaperMeterMeter / UnifiedMeter---Meter--MeterMeterMeterMeter / UnifiedMeterPerforationPipe TaperPipe TaperMeter / Unified / Wit / PerforationMeterMeter----MeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeter-
                                                                                          Thread Size (Nominal)R1 ~ R3/8M3 ~ M12M1 ~ M12M10 ~ M12M3 ~ M24M3 ~ M12-M1 ~ M10NPS1 ~ NPS7/8-M3 ~ M20M2 ~ M6M1.4 ~ M24No.10-32UNF ~ M24M2 ~ M20SM1/4 ~ SM15/64R1 ~ R7/8R1 ~ R7/81UN ~ M48M2 ~ M24M2 ~ M24----M1.4 ~ M20M3 ~ M10M3 ~ M10M2 ~ M12M3 ~ M10M2 ~ M12M3 ~ M10M2 ~ M12M3 ~ M10M2 ~ M24M4M3 ~ M12M1.4 ~ M10M8M3 ~ M10M8 ~ M16M1.4 ~ M10M3 ~ M10M1.4 ~ M6-
                                                                                          Pitch (P), Thread Count(mm)11 ~ 190.5 ~ 1.750.25 ~ 561.5---0.2 ~ 1.511 1/2 ~ 28-0.5 ~ 2.50.4 ~ 10.3 ~ 30.3 ~ 30.4 ~ 2.520 ~ 5611 ~ 2811 ~ 280.25 ~ 640.25 ~ 30.25 ~ 3----0.3 ~ 2.50.5 ~ 1.50.5 ~ 1.50.4 ~ 1.750.5 ~ 1.50.4 ~ 1.750.5 ~ 1.50.4 ~ 1.750.5 ~ 1.50.4 ~ 30.70.5 ~ 1.750.3 ~ 1.51.250.5 ~ 1.51.25 ~ 20.3 ~ 1.50.5 ~ 1.50.3 ~ 1-
                                                                                          Number of Chamfered Threads (Lcf)2.5P2P ~ 4P2P ~ 4P3P---1P ~ 4P--3P2.5P5P1.5P ~ 3P5P2.5P2.5P--2.5P5P-----2 P ~ 4 P1.5 P ~ 2.5 P2.5 P1.5 P ~ 2.5 P2.5 P5 P5 P1.5 P ~ 3 P5 P2.5P1.5P ~ 3P2P ~ 4P2.5P2P2.5P2P ~ 4P2P2P ~ 4P-
                                                                                          Tool Material TypePowdered High-Speed SteelVanadium High-Speed SteelPowdered High-Speed SteelVanadium High-Speed SteelCarbideCarbide-High-Speed Steel--Powdered High-Speed SteelHigh-Speed SteelHigh-Speed SteelCarbideCarbideVanadium High-Speed SteelVanadium High-Speed SteelSKSAlloy High-Speed SteelPowdered High-Speed SteelPowdered High-Speed Steel----CarbideVanadium High-Speed SteelCarbidePowdered High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelCarbideCobalt High-Speed SteelAlloy High-Speed SteelCarbideHigh-Speed SteelAlloy High-Speed SteelHigh-Speed SteelAlloy High-Speed SteelHigh-Speed SteelHigh-Speed SteelHigh-Speed Steel-
                                                                                          Work MaterialMedium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] / Tool Steel (Before SKD Quenching)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○] / Nickel-Based Alloy (Inconel Equivalent)[○]Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[◎] / Cast Steel (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○]Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Cast Steel (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / Alloy Steel (SCM)[○] / Cast Steel (SC)[◎] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○]---Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Titanium Alloy (Ti-6Al-4V Equivalent)[○]Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○]-High-Carbon Steel (C Content Exceeding 0.45%)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Heat-Treated Steel (35 - 45 HRC)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○] / Nickel-Based Alloy (Inconel Equivalent)[○]Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Cast Steel (SC)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○]Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Ductile Cast Iron (FCD)[○]Heat-Treated Steel (45 - 55 HRC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○]High-Hardness Steel (50 - 60 HRC)[○]Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○]Low-Carbon Steel (C Content of 0.25% or Less)[○] / Stainless Steel (SUS)[◎] / Cast Steel (SC)[○]--Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○]Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○]----Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○]Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Bronze (PB)[◎] / Rolled Aluminum Material (AL)[◎]Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Bronze (PB)[◎] / Rolled Aluminum Material (AL)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[○] / Heat-Treated Steel (25 - 35 HRC)[◎] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[◎] / Rolled Aluminum Material (AL)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○]Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○]Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○]Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○]Cast Steel (SC)[○] / Cast Iron (FC)[○] / Rolled Aluminum Material (AL)[○]Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[○] / Heat-Treated Steel (25 - 35 HRC)[○] / Tool Steel (Before SKD Quenching)[◎] / Cast Steel (SC)[◎] / Cast Iron (FC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Bronze (PB)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[◎] / Zinc Alloy Castings (ZDC)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Copper (Cu)[○] / Cast Aluminum Alloy (AC, ADC)[○]Cast Iron (FC)[◎] / Copper (Cu)[◎] / Cast Aluminum Alloy (AC, ADC)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[○]Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Cast Iron (FC)[○] / Copper (Cu)[○] / Cast Aluminum Alloy (AC, ADC)[○]Copper (Cu)[◎] / Cast Aluminum Alloy (AC, ADC)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Cast Iron (FC)[○] / Copper (Cu)[○] / Cast Aluminum Alloy (AC, ADC)[○]Copper (Cu)[◎] / Cast Aluminum Alloy (AC, ADC)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[○]Copper (Cu)[◎] / Cast Aluminum Alloy (AC, ADC)[◎]-
                                                                                          Tap ModelPipe TapRolled TapRolled TapTapping Related ToolsRepair / Removal ToolRepair / Removal ToolRepair / Removal ToolRolled TapDieTapping Related ToolsSpiral TapSpiral TapPoint TapHand TapPoint TapSpiral TapPipe TapDieDieSpiral TapPoint Tap-Oil-Hole TapDie-Tapping CutterRolled TapSpiral TapSpiral TapSpiral TapSpiral TapPoint TapPoint TapHand TapPoint TapSpiral TapHand TapRolled TapSpiral TapRolled TapSpiral TapRolled TapRolled TapRolled TapRepair / Removal Tool
                                                                                          Bore ModelFor Through Holes / For Blind HolesFor Through Holes / For Blind HolesFor Blind HolesFor Through Holes / For Blind Holes------For Blind HolesFor Blind HolesFor Through HolesFor Through Holes / For Blind HolesFor Through Holes / For Blind HolesFor Blind HolesFor Through Holes / For Blind Holes--For Blind HolesFor Through Holes----For Through Holes / For Blind HolesFor Through Holes / For Blind HolesFor Blind HolesFor Blind HolesFor Blind HolesFor Blind HolesFor Through HolesFor Through HolesFor Through Holes / For Blind HolesFor Through HolesFor Blind HolesFor Through Holes / For Blind HolesFor Through Holes / For Blind HolesFor Blind HolesFor Blind HolesFor Blind HolesFor Through Holes / For Blind HolesFor Blind HolesFor Through Holes / For Blind Holes-
                                                                                          Coating PresenceNoneIncludedIncludedNoneIncludedIncluded-Included-NoneNoneNoneNoneNoneIncludedNoneNoneNoneNoneIncludedIncluded----IncludedIncludedNoneNoneIncludedNoneIncludedNoneNoneNoneIncludedIncludedNoneIncludedNoneIncludedNoneNoneNone-
                                                                                          Coating TypeNon-CoatedTiNTiCNNon-CoatedOthersOthers-Others-Non-Coated----TiAlNNon-CoatedNon-CoatedNon-CoatedNon-CoatedOthersOthers----TiAlNTiN--TiN-TiN--Non-Coated-TiCN-TiN-TiN----
                                                                                          Overall Length (L)(mm)62 ~ 9580 ~ 15060 ~ 20015040 ~ 12040 ~ 80-30 ~ 75--46 ~ 10542 ~ 6236 ~ 12034 ~ 12040 ~ 10542 ~ 6555 ~ 95--80 ~ 20080 ~ 200----39 ~ 10546 ~ 7546 ~ 7540 ~ 8246 ~ 15040 ~ 8246 ~ 15040 ~ 8246 ~ 7540 ~ 1205246 ~ 8234 ~ 757070 ~ 15070 ~ 9534 ~ 7570 ~ 15034 ~ 62-

                                                                                          Loading...

                                                                                          Related Categories to Screw Hole Related Tools