(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Screw Hole Related Tools(Work Material:Rolled Aluminum Material (AL))

Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.

Search by specifying the lower class category

Days to Ship
  • All
  • Same day
  • 6 Days or Less
  • 8 Days or Less
  • 9 Days or Less
  • 10 Days or Less
  • 11 Days or Less
  • 12 Days or Less
  • 13 Days or Less
  • 14 Days or Less
  • 16 Days or Less
Brand
Product Series
Days to Ship
Thread Types
Thread Size (Nominal)
Pitch (P), Thread Count(mm)
Number of Chamfered Threads (Lcf)
Tool Material Type
Work Material
Tap Model
Bore Model
Coating Presence
Coating Type
Overall Length (L)(mm)

    Hand Taps - Through Hole/Blind Hole Use, HT

      Forming Taps - X Performer, Grooveless, S-XPF

        Hand Taps - High Speed Steel, HT

          Spiral Flute Taps - Carbide Spiral Fluted, OT-SFT

            Spiral Flute Taps - Model A Series, V Coated, A-SFT

              Spiral Point Taps - High Speed Steel, V Coated, A-POT, Model A Series

              • New Products

              Spiral Flute Taps - High Speed Steel, MT-SPFT

                Spiral Flute Taps - General Purpose, Long Shank, EX-LT-SFT

                  Spiral Flute Taps - Blind Hole Machining, TiN Coated, HS-SFT

                    Thread Mills - Cobalt High Speed Steel, PNGT, Planet Cutter Series MC

                      Forming Taps - TiN Coated, Grooveless, TIN-NRT

                        Spiral Flute Taps - High Speed Steel, SX Type

                          Thread Mills - Carbide, TiAlN Coated, TAC-CTM/TAC-CTML

                            Thread Mills - Carbide, TiAlN Coated, Internal Metric Thread, HMINMT

                              Thread Mills - Carbide, Small Diameter, WH-VM-PNC, Planet Cutter Series

                                Spiral Flute Taps - General Purpose, High Speed Steel, EX-SFT

                                  Thread Mills - Carbide, WX-PNC, Planet Cutter Series NC

                                    Spiral Point Taps - Synchro Taps, Long Shank, HS-LT-RFT

                                      Forming Taps - Carbide, New Roll Tap, Long Shank, OT-LT-NRT

                                        Forming Taps - High Speed Steel, TiCN Coated, IT-TF-T

                                          Parallel Pipe Taps - High Speed Steel, PG Conduit Tap

                                            Spiral Flute Taps - General Purpose, Left Hand Thread, EX-SFT-L

                                              Thread Mills - Carbide, DLC Coated, DLC-ALCTM

                                                Thread Mills - Carbide, TS Coated, TSC-XTM/TSC-XTML

                                                  Spiral Point Taps - Synchro Taps, TiN Coated, HS-RFT

                                                    Taper Pipe Taps - High Speed Steel, Through Hole/Blind Hole Use, TPT

                                                      Forming Taps - TiCN Coated, Grooveless, IT-NRT

                                                        Forming Taps - TiN Coated, Grooveless, Long Shank, TIN-LT-NRT

                                                          Forming Taps - VP New Roll, Grooveless, Long Shank, VP-LT-NRT

                                                            Round Threading Dies - Steel, Solid Type, Parallel Thread, NSP

                                                              Spiral Flute Taps - Plus Series, High Speed Steel, +SP (N+SP)

                                                                Spiral Flute Taps - General Purpose SM, High Speed Steel, EX-SFT-SM

                                                                  Spiral Flute Taps - Model A Series, Spiral Fluted, Long Shank, A-LT-SFT

                                                                    Spiral Point Taps - High Speed Steel, Long Shank, A-LT-POT, Model A Series

                                                                      Thread Mills - Carbide, TiAlN Coated, Internal Metric Thread, MINMT

                                                                        Forming Taps - High Speed Steel, TiN Coated, G-ROT

                                                                          Spiral Flute Taps - Carbide, SEC-SPFT

                                                                            Spiral Flute Taps - High Speed Steel, M-SPFT

                                                                              Spiral Flute Taps - High Speed Steel, TiN Coated, M-SPFT

                                                                                Spiral Flute Taps - High Speed Steel, SPFT

                                                                                  Spiral Point Taps - High Speed Steel, TiN Coated, Regular/Long Shank

                                                                                    Spiral Point Taps - High Speed Steel, Through Hole Use

                                                                                      Hand Taps - Carbide, SEC-HT

                                                                                      • New Products

                                                                                      Spiral Point Taps - High Speed Steel, MT Series, MT-PTAP

                                                                                        Forming Taps - Fluteless for Non-Ferrous Metals, Long Shank, HL-LT-B-NRT

                                                                                        Brand

                                                                                        OSG

                                                                                        OSG

                                                                                        MISUMI

                                                                                        OSG

                                                                                        OSG

                                                                                        OSG

                                                                                        MISUMI

                                                                                        OSG

                                                                                        OSG

                                                                                        OSG

                                                                                        OSG

                                                                                        SKC

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        OSG

                                                                                        OSG

                                                                                        OSG

                                                                                        OSG

                                                                                        OSG

                                                                                        TANOI

                                                                                        SKC

                                                                                        OSG

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        OSG

                                                                                        OSG

                                                                                        OSG

                                                                                        OSG

                                                                                        OSG

                                                                                        SKC

                                                                                        YAMAWA

                                                                                        OSG

                                                                                        OSG

                                                                                        OSG

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        MISUMI

                                                                                        OSG

                                                                                        Product Series

                                                                                        Hand Taps - Through Hole/Blind Hole Use, HT

                                                                                        Forming Taps - X Performer, Grooveless, S-XPF

                                                                                        Hand Taps - High Speed Steel, HT【10 Pieces Per Package】

                                                                                        Spiral Flute Taps - Carbide Spiral Fluted, OT-SFT

                                                                                        Spiral Flute Taps - Model A Series, V Coated, A-SFT

                                                                                        Spiral Point Taps - High Speed Steel, V Coated, A-POT, Model A Series

                                                                                        Spiral Flute Taps - High Speed Steel, MT-SPFT

                                                                                        Spiral Flute Taps - General Purpose, Long Shank, EX-LT-SFT

                                                                                        Spiral Flute Taps - Blind Hole Machining, TiN Coated, HS-SFT

                                                                                        Thread Mills - Cobalt High Speed Steel, PNGT, Planet Cutter Series MC

                                                                                        Forming Taps - TiN Coated, Grooveless, TIN-NRT

                                                                                        Spiral Flute Taps - High Speed Steel, SX Type

                                                                                        Thread Mills - Carbide, TiAlN Coated, TAC-CTM/TAC-CTML

                                                                                        Thread Mills - Carbide, TiAlN Coated, Internal Metric Thread, HMINMT

                                                                                        Thread Mills - Carbide, Small Diameter, WH-VM-PNC, Planet Cutter Series

                                                                                        Spiral Flute Taps - General Purpose, High Speed Steel, EX-SFT

                                                                                        Thread Mills - Carbide, WX-PNC, Planet Cutter Series NC

                                                                                        Spiral Point Taps - Synchro Taps, Long Shank, HS-LT-RFT

                                                                                        Forming Taps - Carbide, New Roll Tap, Long Shank, OT-LT-NRT

                                                                                        Forming Taps - High Speed Steel, TiCN Coated, IT-TF-T

                                                                                        Parallel Pipe Taps - High Speed Steel, PG Conduit Tap

                                                                                        Spiral Flute Taps - General Purpose, Left Hand Thread, EX-SFT-L

                                                                                        Thread Mills - Carbide, DLC Coated, DLC-ALCTM

                                                                                        Thread Mills - Carbide, TS Coated, TSC-XTM/TSC-XTML

                                                                                        Spiral Point Taps - Synchro Taps, TiN Coated, HS-RFT

                                                                                        Taper Pipe Taps - High Speed Steel, Through Hole/Blind Hole Use, TPT

                                                                                        Forming Taps - TiCN Coated, Grooveless, IT-NRT

                                                                                        Forming Taps - TiN Coated, Grooveless, Long Shank, TIN-LT-NRT

                                                                                        Forming Taps - VP New Roll, Grooveless, Long Shank, VP-LT-NRT

                                                                                        Round Threading Dies - Steel, Solid Type, Parallel Thread, NSP

                                                                                        Spiral Flute Taps - Plus Series, High Speed Steel, +SP (N+SP)

                                                                                        Spiral Flute Taps - General Purpose SM, High Speed Steel, EX-SFT-SM

                                                                                        Spiral Flute Taps - Model A Series, Spiral Fluted, Long Shank, A-LT-SFT

                                                                                        Spiral Point Taps - High Speed Steel, Long Shank, A-LT-POT, Model A Series

                                                                                        Thread Mills - Carbide, TiAlN Coated, Internal Metric Thread, MINMT

                                                                                        Forming Taps - High Speed Steel, TiN Coated, G-ROT【5 Pieces Per Package】

                                                                                        Spiral Flute Taps - Carbide, SEC-SPFT

                                                                                        Spiral Flute Taps - High Speed Steel, M-SPFT【5 Pieces Per Package】

                                                                                        Spiral Flute Taps - High Speed Steel, TiN Coated, M-SPFT【1-5 Pieces Per Package】

                                                                                        Spiral Flute Taps - High Speed Steel, SPFT【10 Pieces Per Package】

                                                                                        Spiral Point Taps - High Speed Steel, TiN Coated, Regular/Long Shank【1-5 Pieces Per Package】

                                                                                        Spiral Point Taps - High Speed Steel, Through Hole Use【10 Pieces Per Package】

                                                                                        Hand Taps - Carbide, SEC-HT

                                                                                        Spiral Point Taps - High Speed Steel, MT Series, MT-PTAP

                                                                                        Forming Taps - Fluteless for Non-Ferrous Metals, Long Shank, HL-LT-B-NRT

                                                                                        Days to Ship Same day or more

                                                                                        Show Stock Products

                                                                                        8 Days or more Same day or more

                                                                                        Show Stock Products

                                                                                        8 Days or more 8 Days or more 8 Days or more Same day or more

                                                                                        Show Stock Products

                                                                                        8 Days or more Same day

                                                                                        Show Stock Products

                                                                                        8 Days or more 8 Days or more 9 Days or more 8 Days or more 10 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 9 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 10 Days or more Same day or more

                                                                                        Show Stock Products

                                                                                        8 Days or more 8 Days or more Same day or more

                                                                                        Show Stock Products

                                                                                        8 Days or more 8 Days or more 8 Days or more Same day or more

                                                                                        Show Stock Products

                                                                                        8 Days or more 8 Days or more
                                                                                        Thread TypesMeter / UnifiedMeterMeterMeterMeter / UnifiedMeter / UnifiedMeterMeterMeterMeter / Pipe Taper / Pipe ParallelMeter / UnifiedMeter / WitMeterMeterMeter / UnifiedMeter / UnifiedMeter / Unified / Pipe TaperMeterMeterMeterOthersMeterMeterMeterMeterPipe TaperMeter / UnifiedMeterMeter / Unified-MeterPerforationMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeter
                                                                                        Thread Size (Nominal)1UNS ~ M38M1 ~ M45M3 ~ M10M3 ~ M121-8UNC ~ M561/2-20UNF ~ M24M2 ~ M24M2.5 ~ M20M5 ~ M10-No0UN ~ M20W1 ~ M48M3 ~ M20M2 ~ M12-1/2UN ~ M36-M3 ~ M30M3 ~ M12M1 ~ M10PG7 ~ PG42M24 ~ M30M3 ~ M16M3 ~ M12M3 ~ M14R1"1/4 ~ R5/8M1 ~ No4UNM3 ~ M12M1 ~ M12NPS1 ~ NPS7/8M2 ~ M6SM1/4 ~ SM15/64M2 ~ M24M2 ~ M24M1.4 ~ M20M3 ~ M10M3 ~ M10M2 ~ M12M3 ~ M10M2 ~ M12M3 ~ M10M2 ~ M12M3 ~ M10M2 ~ M24M8
                                                                                        Pitch (P), Thread Count(mm)0.25 ~ 400.2 ~ 4.50.5 ~ 1.50.5 ~ 1.750.25 ~ 5.50.25 ~ 30.4 ~ 30.45 ~ 20.8 ~ 1.51 ~ 190.25 ~ 800.5 ~ 200.5 ~ 2.50.4 ~ 1.750.25 ~ 320.35 ~ 401 ~ 280.5 ~ 3.50.5 ~ 1.750.2 ~ 1.516 ~ 203 ~ 3.50.5 ~ 20.5 ~ 1.750.5 ~ 211 ~ 140.25 ~ 560.5 ~ 1.750.25 ~ 5611 1/2 ~ 280.4 ~ 120 ~ 560.25 ~ 30.25 ~ 30.3 ~ 2.50.5 ~ 1.50.5 ~ 1.50.4 ~ 1.750.5 ~ 1.50.4 ~ 1.750.5 ~ 1.50.4 ~ 1.750.5 ~ 1.50.4 ~ 31.25
                                                                                        Number of Chamfered Threads (Lcf)1.5P ~ 9P2P ~ 4P1.5 P ~ 9 P1.5P ~ 2.5P1.5P ~ 2.5P5P2.5 P2.5P3P-2P ~ 4P----2.5P ~ 3P-6P2P1P ~ 4P-2.5P--6P2.5P2P2P ~ 4P2P ~ 4P-2.5P2.5P2.5P5P-2 P ~ 4 P1.5 P ~ 2.5 P2.5 P1.5 P ~ 2.5 P2.5 P5 P5 P1.5 P ~ 3 P5 P2P
                                                                                        Tool Material TypeHigh-Speed SteelPowdered High-Speed Steel / Vanadium High-Speed SteelVanadium High-Speed SteelCarbidePowdered High-Speed Steel / Vanadium High-Speed SteelPowdered High-Speed SteelCobalt High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelCobalt High-Speed SteelVanadium High-Speed Steel-CarbideCarbideCarbideVanadium High-Speed SteelCarbideVanadium High-Speed SteelCarbideHigh-Speed SteelHigh-Speed SteelVanadium High-Speed SteelCarbideCarbideVanadium High-Speed SteelHigh-Speed SteelPowdered High-Speed SteelVanadium High-Speed SteelPowdered High-Speed Steel-High-Speed SteelVanadium High-Speed SteelPowdered High-Speed SteelPowdered High-Speed SteelCarbideVanadium High-Speed SteelCarbidePowdered High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelCarbideCobalt High-Speed SteelHigh-Speed Steel
                                                                                        Work MaterialRolled Aluminum Material (AL)[○]Rolled Aluminum Material (AL)[◎]Rolled Aluminum Material (AL)[○]Rolled Aluminum Material (AL)[○]Rolled Aluminum Material (AL)[○]Rolled Aluminum Material (AL)[○]Rolled Aluminum Material (AL)[◎]Rolled Aluminum Material (AL)[○]Rolled Aluminum Material (AL)[○]Rolled Aluminum Material (AL)[○]Rolled Aluminum Material (AL)[○]Rolled Aluminum Material (AL)[○]Rolled Aluminum Material (AL)[○]Rolled Aluminum Material (AL)[○]Rolled Aluminum Material (AL)[○/◎]Rolled Aluminum Material (AL)[○]Rolled Aluminum Material (AL)[◎]Rolled Aluminum Material (AL)[○]Rolled Aluminum Material (AL)[◎]Rolled Aluminum Material (AL)[○]Rolled Aluminum Material (AL)[○]Rolled Aluminum Material (AL)[○]Rolled Aluminum Material (AL)[◎]Rolled Aluminum Material (AL)[○]Rolled Aluminum Material (AL)[○]Rolled Aluminum Material (AL)[○]Rolled Aluminum Material (AL)[◎]Rolled Aluminum Material (AL)[○]Rolled Aluminum Material (AL)[◎]Rolled Aluminum Material (AL)[○]Rolled Aluminum Material (AL)[○]Rolled Aluminum Material (AL)[○]Rolled Aluminum Material (AL)[○]Rolled Aluminum Material (AL)[○]Rolled Aluminum Material (AL)[○]Rolled Aluminum Material (AL)[◎]Rolled Aluminum Material (AL)[◎]Rolled Aluminum Material (AL)[◎]Rolled Aluminum Material (AL)[○]Rolled Aluminum Material (AL)[○]Rolled Aluminum Material (AL)[○]Rolled Aluminum Material (AL)[○]Rolled Aluminum Material (AL)[○]Rolled Aluminum Material (AL)[◎]Rolled Aluminum Material (AL)[◎]
                                                                                        Tap ModelHand TapRolled TapHand TapSpiral TapSpiral TapPoint TapSpiral TapSpiral TapSpiral TapTapping CutterRolled TapSpiral TapTapping CutterTapping CutterTapping CutterSpiral TapTapping CutterPoint TapRolled TapRolled TapPipe TapSpiral TapTapping CutterTapping CutterPoint TapPipe TapRolled TapRolled TapRolled TapDieSpiral TapSpiral TapSpiral TapPoint TapTapping CutterRolled TapSpiral TapSpiral TapSpiral TapSpiral TapPoint TapPoint TapHand TapPoint TapRolled Tap
                                                                                        Bore ModelFor Through Holes / For Blind HolesFor Through Holes / For Blind HolesFor Through Holes / For Blind HolesFor Blind HolesFor Blind HolesFor Through HolesFor Blind HolesFor Blind HolesFor Blind HolesFor Through Holes / For Blind HolesFor Blind Holes-For Through Holes / For Blind HolesFor Through Holes / For Blind HolesFor Through Holes / For Blind HolesFor Blind HolesFor Through Holes / For Blind HolesFor Through HolesFor Through Holes / For Blind Holes--For Blind HolesFor Through Holes / For Blind HolesFor Through Holes / For Blind HolesFor Through HolesFor Through Holes / For Blind HolesFor Blind HolesFor Through Holes / For Blind HolesFor Blind Holes-For Blind HolesFor Blind HolesFor Blind HolesFor Through HolesFor Through Holes / For Blind HolesFor Through Holes / For Blind HolesFor Blind HolesFor Blind HolesFor Blind HolesFor Blind HolesFor Through HolesFor Through HolesFor Through Holes / For Blind HolesFor Through HolesFor Through Holes / For Blind Holes
                                                                                        Coating PresenceNoneIncludedNoneNoneIncludedIncludedNoneNoneIncludedIncludedIncluded-IncludedIncludedIncludedNoneIncludedIncludedNoneIncluded-NoneIncludedIncludedIncludedNoneIncludedIncludedIncluded-NoneNoneIncludedIncludedIncludedIncludedNoneNoneIncludedNoneIncludedNoneNoneNoneIncluded
                                                                                        Coating TypeNon-CoatedTiCN-Non-CoatedOthersOthersNon-CoatedNon-CoatedTiNTiNTiN-TiAlNTiAlNFor High Hardness (Silicone-Based) / OthersNon-CoatedTiAlNTiNNon-CoatedTiCN-Non-CoatedDLCFor High Hardness (Silicone-Based)TiNNon-CoatedTiCNTiNTiCN--Non-CoatedOthersOthersTiAlNTiN--TiN-TiN--Non-CoatedNon-Coated
                                                                                        Overall Length (L)(mm)30 ~ 16530 ~ 22046 ~ 7546 ~ 8234 ~ 25034 ~ 12040 ~ 12080 ~ 25060 ~ 7580 ~ 21030 ~ 105-57 ~ 11558 ~ 734036 ~ 15560 ~ 120100 ~ 200100 ~ 15030 ~ 7585 ~ 135120 ~ 13557 ~ 9248 ~ 7446 ~ 8882 ~ 10530 ~ 4680 ~ 15060 ~ 200-42 ~ 6242 ~ 6580 ~ 20080 ~ 20039 ~ 10546 ~ 7546 ~ 7540 ~ 8246 ~ 15040 ~ 8246 ~ 15040 ~ 8246 ~ 7540 ~ 120150

                                                                                        Loading...

                                                                                        Related Categories to Screw Hole Related Tools