(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Screw Hole Related Tools(Work Material:Heat-Treated Steel (35 - 45 HRC))

Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.

Search by specifying the lower class category

Days to Ship
  • All
  • Same day
  • 6 Days or Less
  • 8 Days or Less
  • 9 Days or Less
  • 10 Days or Less
  • 11 Days or Less
  • 12 Days or Less
  • 13 Days or Less
  • 14 Days or Less
  • 16 Days or Less
  1. 1
Brand
Product Series
Days to Ship
Thread Types
Thread Size (Nominal)
Pitch (P), Thread Count(mm)
Number of Chamfered Threads (Lcf)
Tool Material Type
Work Material
Tap Model
Bore Model
Coating Presence
Coating Type
Overall Length (L)(mm)

    Forming Taps - X Performer, Grooveless, S-XPF

      Spiral Flute Taps - High Speed Steel, V Coated, VP-SFT

        Thread Mills - Cobalt High Speed Steel, PNGT, Planet Cutter Series MC

          Thread Mills - Carbide, TiAlN Coated, TAC-CTM/TAC-CTML

            Thread Mills - Carbide, TiAlN Coated, Internal Metric Thread, HMINMT

              Thread Mills - Carbide, Small Diameter, WH-VM-PNC, Planet Cutter Series

                Thread Mills - Carbide, TiAlN Coated, WXO-ST-PNC

                  Spiral Point Taps - Synchro Taps, Long Shank, HS-LT-RFT

                    Spiral Flute Taps - High Speed Steel for Hard-to-Cut Material, CPM-SFT

                      Spiral Point Taps - Synchro Taps, TiN Coated, HS-RFT

                        Taper Pipe Taps - High Speed Steel, for Difficult-to-Cut Materials, Short Screw, CPM-S-TPT

                          Spiral Flute Taps - For Titanium Alloys, ZET-B

                            Spiral Flute Taps - High Speed Steel for Hard-to-Cut Material, Long Shank, CPM-LT-SFT

                              Hand Taps - for Difficult-To-Cut Materials, CPM-HT

                                Spiral Point Taps - Synchro Taps, JIS Shank, TiN Coated, J-HS-RFT

                                  Spiral Point Taps - for Difficult-To-Cut Materials, Through Hole Use, CPM-POT

                                    Spiral Point Taps - for Difficult-To-Cut Materials, Long Shank, CPM-LT-POT

                                      Taper Pipe Taps - High Speed Steel, TiN Coated, TIN-TPT

                                        Taper Pipe Taps - High Speed Steel, TiN Coated, Short Screw, TIN-S-TPT

                                          Taper Pipe Taps - High Speed Steel, for Difficult-to-Cut Materials, CPM-TPT

                                            Taper Pipe Taps - for Difficult-to-Cut Materials, Long Shank, Short Screw, CPM-LT-S-TPT

                                              Forming Taps - VP New Roll, Grooveless, VP-NRT

                                                Thread Mills - Carbide, Micro Tool, MMTS

                                                  Spiral Flute Taps - For Titanium Alloys, Through Hole Use, ZET-P

                                                    Thread Mills - Carbide, Helical Thread, MC-CSLC

                                                      Spiral Point Taps - Cobalt High Speed Steel, Through Hole Use, EH-PO

                                                        Spiral Flute Taps - SG Spiral Tap, High Speed Steel, SGSP

                                                          Spiral Point Taps - TiCN Coated, Through Hole Use, SGPO

                                                          Brand

                                                          OSG

                                                          OSG

                                                          OSG

                                                          MISUMI

                                                          MISUMI

                                                          OSG

                                                          OSG

                                                          OSG

                                                          OSG

                                                          OSG

                                                          OSG

                                                          YAMAWA

                                                          OSG

                                                          OSG

                                                          OSG

                                                          OSG

                                                          OSG

                                                          OSG

                                                          OSG

                                                          OSG

                                                          OSG

                                                          OSG

                                                          NS TOOL

                                                          YAMAWA

                                                          YAMAWA

                                                          YAMAWA

                                                          Nachi-Fujikoshi

                                                          Nachi-Fujikoshi

                                                          Product Series

                                                          Forming Taps - X Performer, Grooveless, S-XPF

                                                          Spiral Flute Taps - High Speed Steel, V Coated, VP-SFT

                                                          Thread Mills - Cobalt High Speed Steel, PNGT, Planet Cutter Series MC

                                                          Thread Mills - Carbide, TiAlN Coated, TAC-CTM/TAC-CTML

                                                          Thread Mills - Carbide, TiAlN Coated, Internal Metric Thread, HMINMT

                                                          Thread Mills - Carbide, Small Diameter, WH-VM-PNC, Planet Cutter Series

                                                          Thread Mills - Carbide, TiAlN Coated, WXO-ST-PNC

                                                          Spiral Point Taps - Synchro Taps, Long Shank, HS-LT-RFT

                                                          Spiral Flute Taps - High Speed Steel for Hard-to-Cut Material, CPM-SFT

                                                          Spiral Point Taps - Synchro Taps, TiN Coated, HS-RFT

                                                          Taper Pipe Taps - High Speed Steel, for Difficult-to-Cut Materials, Short Screw, CPM-S-TPT

                                                          Spiral Flute Taps - For Titanium Alloys, ZET-B

                                                          Spiral Flute Taps - High Speed Steel for Hard-to-Cut Material, Long Shank, CPM-LT-SFT

                                                          Hand Taps - for Difficult-To-Cut Materials, CPM-HT

                                                          Spiral Point Taps - Synchro Taps, JIS Shank, TiN Coated, J-HS-RFT

                                                          Spiral Point Taps - for Difficult-To-Cut Materials, Through Hole Use, CPM-POT

                                                          Spiral Point Taps - for Difficult-To-Cut Materials, Long Shank, CPM-LT-POT

                                                          Taper Pipe Taps - High Speed Steel, TiN Coated, TIN-TPT

                                                          Taper Pipe Taps - High Speed Steel, TiN Coated, Short Screw, TIN-S-TPT

                                                          Taper Pipe Taps - High Speed Steel, for Difficult-to-Cut Materials, CPM-TPT

                                                          Taper Pipe Taps - for Difficult-to-Cut Materials, Long Shank, Short Screw, CPM-LT-S-TPT

                                                          Forming Taps - VP New Roll, Grooveless, VP-NRT

                                                          Thread Mills - Carbide, Micro Tool, MMTS

                                                          Spiral Flute Taps - For Titanium Alloys, Through Hole Use, ZET-P

                                                          Thread Mills - Carbide, Helical Thread, MC-CSLC

                                                          Spiral Point Taps - Cobalt High Speed Steel, Through Hole Use, EH-PO

                                                          Spiral Flute Taps - SG Spiral Tap, High Speed Steel, SGSP

                                                          Spiral Point Taps - TiCN Coated, Through Hole Use, SGPO

                                                          Days to Ship 8 Days or more 8 Days or more 8 Days or more 8 Days or more 10 Days or more 8 Days or more 8 Days or more 8 Days or more Same day

                                                          Show Stock Products

                                                          8 Days or more 8 Days or more 8 Days or more Same day or more

                                                          Show Stock Products

                                                          8 Days or more 8 Days or more 8 Days or more 8 Days or more Same day or more

                                                          Show Stock Products

                                                          8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more
                                                          Thread TypesMeterMeterMeter / Pipe Taper / Pipe ParallelMeterMeterMeter / UnifiedMeterMeterMeterMeterPipe TaperMeterMeterMeterMeterMeterMeterPipe TaperPipe TaperPipe TaperPipe TaperMeter / UnifiedOthersMeterMeter / Pipe Taper / Pipe ParallelMeterMeterMeter
                                                          Thread Size (Nominal)M1 ~ M45M3 ~ M12-M3 ~ M20M2 ~ M12--M3 ~ M30M1.6 ~ M20M3 ~ M14R1 ~ R3/8M3 ~ M20M6 ~ M16M12M3 ~ M14M6M8 ~ M12R1 ~ R3/8R1 ~ R3/8R1 ~ R3/8R1 ~ R3/8M1 ~ M12S0.1 ~ S1.4M3 ~ M2006510X28R ~ 200505N300MM3 ~ M24M3 ~ M24M3 ~ M24
                                                          Pitch (P), Thread Count(mm)0.2 ~ 4.50.5 ~ 1.751 ~ 190.5 ~ 2.50.4 ~ 1.750.4 ~ 320.5 ~ 30.5 ~ 3.50.35 ~ 2.50.5 ~ 211 ~ 190.5 ~ 2.51 ~ 21.750.5 ~ 211.25 ~ 1.7511 ~ 2811 ~ 2811 ~ 2811 ~ 280.25 ~ 560.025 ~ 0.30.5 ~ 2.50.5 ~ 30.5 ~ 30.5 ~ 30.5 ~ 3
                                                          Number of Chamfered Threads (Lcf)2P ~ 4P2.5P-----6P3P6P2.5P3P3P2P ~ 5P5P5P5P2.5P2.5P2.5P2.5P2P ~ 4P-5P-4.5P2.55
                                                          Tool Material TypePowdered High-Speed Steel / Vanadium High-Speed SteelPowdered High-Speed SteelCobalt High-Speed SteelCarbideCarbideCarbideCarbideVanadium High-Speed SteelPowdered High-Speed SteelVanadium High-Speed SteelPowdered High-Speed SteelPowdered High-Speed SteelPowdered High-Speed SteelPowdered High-Speed SteelVanadium High-Speed SteelPowdered High-Speed SteelPowdered High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelPowdered High-Speed SteelPowdered High-Speed SteelPowdered High-Speed SteelCarbidePowdered High-Speed SteelCarbideCobalt High-Speed SteelAlloy High-Speed SteelHigh-Speed Steel
                                                          Work MaterialHeat-Treated Steel (35 - 45 HRC)[◎]Heat-Treated Steel (35 - 45 HRC)[◎]Heat-Treated Steel (35 - 45 HRC)[○]Heat-Treated Steel (35 - 45 HRC)[○]Heat-Treated Steel (35 - 45 HRC)[◎]Heat-Treated Steel (35 - 45 HRC)[◎]Heat-Treated Steel (35 - 45 HRC)[◎]Heat-Treated Steel (35 - 45 HRC)[○]Heat-Treated Steel (35 - 45 HRC)[◎]Heat-Treated Steel (35 - 45 HRC)[○]Heat-Treated Steel (35 - 45 HRC)[◎]Heat-Treated Steel (35 - 45 HRC)[○]Heat-Treated Steel (35 - 45 HRC)[◎]Heat-Treated Steel (35 - 45 HRC)[◎]Heat-Treated Steel (35 - 45 HRC)[○]Heat-Treated Steel (35 - 45 HRC)[◎]Heat-Treated Steel (35 - 45 HRC)[◎]Heat-Treated Steel (35 - 45 HRC)[○]Heat-Treated Steel (35 - 45 HRC)[○]Heat-Treated Steel (35 - 45 HRC)[◎]Heat-Treated Steel (35 - 45 HRC)[○]Heat-Treated Steel (35 - 45 HRC)[○]Heat-Treated Steel (35 - 45 HRC)[◎]Heat-Treated Steel (35 - 45 HRC)[○]Heat-Treated Steel (35 - 45 HRC)[○]Heat-Treated Steel (35 - 45 HRC)[○]Heat-Treated Steel (35 - 45 HRC)[○]Heat-Treated Steel (35 - 45 HRC)[○]
                                                          Tap ModelRolled TapSpiral TapTapping CutterTapping CutterTapping CutterTapping CutterTapping CutterPoint TapSpiral TapPoint TapPipe TapSpiral TapSpiral TapHand TapPoint TapPoint TapPoint TapPipe TapPipe TapPipe TapPipe TapRolled TapTapping CutterSpiral TapTapping CutterPoint TapSpiral TapPoint Tap
                                                          Bore ModelFor Through Holes / For Blind HolesFor Blind HolesFor Through Holes / For Blind HolesFor Through Holes / For Blind HolesFor Through Holes / For Blind HolesFor Through Holes / For Blind HolesFor Through Holes / For Blind HolesFor Through HolesFor Blind HolesFor Through HolesFor Through Holes / For Blind HolesFor Blind HolesFor Blind HolesFor Through Holes / For Blind HolesFor Through HolesFor Through HolesFor Through HolesFor Through Holes / For Blind HolesFor Through Holes / For Blind HolesFor Through Holes / For Blind HolesFor Through Holes / For Blind HolesFor Blind Holes-For Through HolesFor Through Holes / For Blind HolesFor Through HolesFor Through Holes / For Blind HolesFor Through Holes
                                                          Coating PresenceIncludedIncludedIncludedIncludedIncludedIncludedIncludedIncludedNoneIncludedNoneNoneNoneNoneIncludedNoneNoneIncludedIncludedNoneNoneIncludedIncludedNoneIncludedNoneIncludedIncluded
                                                          Coating TypeTiCNTiCNTiNTiAlNTiAlNFor High Hardness (Silicone-Based) / OthersTiAlNTiNNon-CoatedTiNNon-Coated-Non-CoatedNon-CoatedTiNNon-CoatedNon-CoatedTiNTiNNon-CoatedNon-CoatedTiCNTiAlN-TiAlN-TiCNTiCN
                                                          Overall Length (L)(mm)30 ~ 22046 ~ 8280 ~ 21057 ~ 11558 ~ 734060 ~ 120100 ~ 20036 ~ 10546 ~ 8862 ~ 9546 ~ 105100 ~ 1508246 ~ 886215055 ~ 9555 ~ 9555 ~ 95120 ~ 15030 ~ 824546 ~ 10550 ~ 14046 ~ 12046 ~ 12046 ~ 120

                                                          Loading...

                                                          1. 1

                                                          Related Categories to Screw Hole Related Tools