(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Screw Hole Related Tools(Thread Size (Nominal):M42)

Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.

Search by specifying the lower class category

Days to Ship
  • All
  • Same day
  • 6 Days or Less
  • 8 Days or Less
  • 9 Days or Less
  • 10 Days or Less
  • 11 Days or Less
  • 12 Days or Less
  • 13 Days or Less
  • 14 Days or Less
  • 16 Days or Less
  1. 1
Brand
Product Series
Days to Ship
Thread Types
Thread Size (Nominal)
Pitch (P), Thread Count(mm)
Number of Chamfered Threads (Lcf)
Tool Material Type
Work Material
Tap Model
Bore Model
Coating Presence
Coating Type
Overall Length (L)(mm)

    Forming Taps - X Performer, Grooveless, S-XPF

      Spiral Flute Taps - Model A Series, V Coated, A-SFT

        Spiral Flute Taps - High Speed Steel, SX Type

          Round Threading Dies - Alloy High Speed Steel, General Thread, RD-S

            Spiral Point Taps - High Speed Steel, TiN Coated, TIN-POT

              Spiral Point Taps - High Speed Steel, Oxidized, EX-H-POT

              Brand

              OSG

              OSG

              SKC

              OSG

              OSG

              OSG

              Product Series

              Forming Taps - X Performer, Grooveless, S-XPF

              Spiral Flute Taps - Model A Series, V Coated, A-SFT

              Spiral Flute Taps - High Speed Steel, SX Type

              Round Threading Dies - Alloy High Speed Steel, General Thread, RD-S

              Spiral Point Taps - High Speed Steel, TiN Coated, TIN-POT

              Spiral Point Taps - High Speed Steel, Oxidized, EX-H-POT

              Days to Ship 8 Days or more 8 Days or more 9 Days or more 8 Days or more 8 Days or more 8 Days or more
              Thread TypesMeterMeterMeterMeterMeterMeter
              Thread Size (Nominal)M42M42M42M42M42M42
              Pitch (P), Thread Count(mm)4.51.5 ~ 4.54.51 ~ 4.51.5 ~ 4.54.5
              Number of Chamfered Threads (Lcf)2P2.5P--5P5P
              Tool Material TypePowdered High-Speed SteelVanadium High-Speed Steel-Alloy High-Speed SteelVanadium High-Speed SteelVanadium High-Speed Steel
              Work MaterialLow-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] / Cast Steel (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○]Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○]-Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[◎] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○] / Thermoplastic (PVC, Nylon etc.)[○]Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Steel (SC)[○] / Thermoplastic (PVC, Nylon etc.)[○]
              Tap ModelRolled TapSpiral TapSpiral TapDiePoint TapPoint Tap
              Bore ModelFor Through Holes / For Blind HolesFor Blind Holes--For Through HolesFor Through Holes
              Coating PresenceIncludedIncluded-NoneIncludedNone
              Coating TypeTiCNOthers-Non-CoatedTiNNon-Coated
              Overall Length (L)(mm)200170 ~ 200--120 ~ 175175

              Loading...

              1. 1

              Related Categories to Screw Hole Related Tools