(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Screw Hole Related Tools(Thread Size (Nominal):M36)

Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.

Search by specifying the lower class category

Days to Ship
  • All
  • Same day
  • 6 Days or Less
  • 8 Days or Less
  • 9 Days or Less
  • 10 Days or Less
  • 11 Days or Less
  • 12 Days or Less
  • 13 Days or Less
  • 14 Days or Less
  • 16 Days or Less
  1. 1
Brand
Product Series
Days to Ship
Thread Types
Thread Size (Nominal)
Pitch (P), Thread Count(mm)
Number of Chamfered Threads (Lcf)
Tool Material Type
Work Material
Tap Model
Bore Model
Coating Presence
Coating Type
Overall Length (L)(mm)

    Forming Taps - X Performer, Grooveless, S-XPF

      Spiral Flute Taps - Model A Series, V Coated, A-SFT

        Spiral Flute Taps - High Speed Steel, SX Type

          Spiral Flute Taps - General Purpose, High Speed Steel, EX-SFT

            Round Threading Dies - Alloy High Speed Steel, General Thread, RD-S

              Spiral Point Taps - High Speed Steel, TiN Coated, TIN-POT

                Spiral Point Taps - High Speed Steel, Through Hole Use, EX-POT

                  Spiral Point Taps - High Speed Steel, Oxidized, EX-H-POT

                  Brand

                  OSG

                  OSG

                  SKC

                  OSG

                  OSG

                  OSG

                  OSG

                  OSG

                  Product Series

                  Forming Taps - X Performer, Grooveless, S-XPF

                  Spiral Flute Taps - Model A Series, V Coated, A-SFT

                  Spiral Flute Taps - High Speed Steel, SX Type

                  Spiral Flute Taps - General Purpose, High Speed Steel, EX-SFT

                  Round Threading Dies - Alloy High Speed Steel, General Thread, RD-S

                  Spiral Point Taps - High Speed Steel, TiN Coated, TIN-POT

                  Spiral Point Taps - High Speed Steel, Through Hole Use, EX-POT

                  Spiral Point Taps - High Speed Steel, Oxidized, EX-H-POT

                  Days to Ship 8 Days or more 8 Days or more 9 Days or more 8 Days or more 8 Days or more 8 Days or more 17 Days or more 8 Days or more
                  Thread TypesMeterMeterMeterMeterMeterMeterMeterMeter
                  Thread Size (Nominal)M36M36M36M36M36M36M36M36
                  Pitch (P), Thread Count(mm)41.5 ~ 4441 ~ 41.5 ~ 444
                  Number of Chamfered Threads (Lcf)2P2.5P-3P-5P5P5P
                  Tool Material TypePowdered High-Speed SteelVanadium High-Speed Steel-Vanadium High-Speed SteelAlloy High-Speed SteelVanadium High-Speed SteelVanadium High-Speed SteelVanadium High-Speed Steel
                  Work MaterialLow-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Heat-Treated Steel (25 - 35 HRC)[◎] / Heat-Treated Steel (35 - 45 HRC)[◎] / Cast Steel (SC)[○] / Copper (Cu)[◎] / Brass (Bs)[◎] / Brass Cast Iron (BsC)[◎] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎]Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○]Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○]Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○]-Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[◎] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○] / Thermoplastic (PVC, Nylon etc.)[○]Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○]Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Steel (SC)[○] / Thermoplastic (PVC, Nylon etc.)[○]
                  Tap ModelRolled TapSpiral TapSpiral TapSpiral TapDiePoint TapPoint TapPoint Tap
                  Bore ModelFor Through Holes / For Blind HolesFor Blind Holes-For Blind Holes-For Through HolesFor Through HolesFor Through Holes
                  Coating PresenceIncludedIncluded-NoneNoneIncludedNoneNone
                  Coating TypeTiCNOthers-Non-CoatedNon-CoatedTiNNon-CoatedNon-Coated
                  Overall Length (L)(mm)200170 ~ 200-155-110 ~ 155155155

                  Loading...

                  1. 1

                  Related Categories to Screw Hole Related Tools