(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Screw Hole Related Tools(Thread Size (Nominal):M11)

Threading tools have functions to cut threads in accordance with the required thread types and sizes, or to conduct plastic forming. Commonly-used tool type is formed tools called taps. They are used in many different ways; for example, handles are attached to them for manual machining, or for large-lot production, they are mounted to machine tools called tool holders or NC machine tool. High-speed steel is most commonly employed for these tools, and alloy carbide (coated alloy carbide is mainly applied) is also increasingly employed for its durability. When threading with taps, the thinner taps are, the more likely they break. As cutting chips solidify with heat, or the tap end makes contact with the bottom of pilot hole, there is more possibility the tap is damaged. Additionally, when using a coil insert, a dedicated tap needs to be used rather than a regular tap.

Search by specifying the lower class category

Days to Ship
  • All
  • Same day
  • 6 Days or Less
  • 8 Days or Less
  • 9 Days or Less
  • 10 Days or Less
  • 11 Days or Less
  • 12 Days or Less
  • 13 Days or Less
  • 14 Days or Less
  • 16 Days or Less
  1. 1
Brand
Product Series
Days to Ship
Thread Types
Thread Size (Nominal)
Pitch (P), Thread Count(mm)
Number of Chamfered Threads (Lcf)
Tool Material Type
Work Material
Tap Model
Bore Model
Coating Presence
Coating Type
Overall Length (L)(mm)

    Hand Taps - Through Hole/Blind Hole Use, HT

      Spiral Flute Taps - Model A Series, V Coated, A-SFT

        Spiral Point Taps - High Speed Steel, V Coated, A-POT, Model A Series

          Spiral Flute Taps - High Speed Steel, SX Type

            Spiral Flute Taps - General Purpose, High Speed Steel, EX-SFT

              Spiral Flute Taps - Model A Series, Spiral Fluted, Long Shank, A-LT-SFT

                Spiral Point Taps - High Speed Steel, Long Shank, A-LT-POT, Model A Series

                  Spiral Point Taps - High Speed Steel, Through Hole Use, EX-POT

                    Forming Taps - High Speed Steel, TiCN Coated, SL-TF

                      Round Threading Dies - Alloy High Speed Steel, General Thread, RD-S

                        Round Threading Dies - High Speed Steel, Solid Type, Metric

                        Brand

                        OSG

                        OSG

                        OSG

                        SKC

                        OSG

                        OSG

                        OSG

                        OSG

                        TANOI

                        OSG

                        YAMAWA

                        Product Series

                        Hand Taps - Through Hole/Blind Hole Use, HT

                        Spiral Flute Taps - Model A Series, V Coated, A-SFT

                        Spiral Point Taps - High Speed Steel, V Coated, A-POT, Model A Series

                        Spiral Flute Taps - High Speed Steel, SX Type

                        Spiral Flute Taps - General Purpose, High Speed Steel, EX-SFT

                        Spiral Flute Taps - Model A Series, Spiral Fluted, Long Shank, A-LT-SFT

                        Spiral Point Taps - High Speed Steel, Long Shank, A-LT-POT, Model A Series

                        Spiral Point Taps - High Speed Steel, Through Hole Use, EX-POT

                        Forming Taps - High Speed Steel, TiCN Coated, SL-TF

                        Round Threading Dies - Alloy High Speed Steel, General Thread, RD-S

                        Round Threading Dies - High Speed Steel, Solid Type, Metric

                        Days to Ship Same day or more

                        Show Stock Products

                        8 Days or more 8 Days or more 9 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more 8 Days or more
                        Thread TypesMeterMeterMeterMeterMeterMeterMeterMeterMeterMeterMeter
                        Thread Size (Nominal)M11M11M11M11M11M11M11M11M11M11M11
                        Pitch (P), Thread Count(mm)0.75 ~ 1.50.75 ~ 1.50.75 ~ 1.51.25 ~ 1.50.75 ~ 1.50.75 ~ 1.50.75 ~ 1.50.751 ~ 1.50.5 ~ 1.50.75 ~ 1
                        Number of Chamfered Threads (Lcf)1.5P ~ 5P2.5P5P-2.5P2.5P5P5P2P--
                        Tool Material TypeHigh-Speed SteelPowdered High-Speed SteelPowdered High-Speed Steel-Vanadium High-Speed SteelPowdered High-Speed SteelPowdered High-Speed SteelVanadium High-Speed SteelHigh-Speed SteelAlloy High-Speed SteelHigh-Speed Steel
                        Work MaterialMedium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Ductile Cast Iron (FCD)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○]Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○]Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○]Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Zinc Alloy Castings (ZDC)[○]Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / Alloy Steel (SCM)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○]Low-Carbon Steel (C Content of 0.25% or Less)[○] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[○] / Stainless Steel (SUS)[○] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[◎] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○]Low-Carbon Steel (C Content of 0.25% or Less)[◎] / Medium-Carbon Steel (C Content 0.25 - 0.45%)[◎] / High-Carbon Steel (C Content Exceeding 0.45%)[◎] / Alloy Steel (SCM)[◎] / Stainless Steel (SUS)[◎] / Tool Steel (Before SKD Quenching)[○] / Cast Steel (SC)[◎] / Ductile Cast Iron (FCD)[◎] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[○] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Titanium Alloy (Ti-6Al-4V Equivalent)[○]Medium-Carbon Steel (C Content 0.25 - 0.45%)[○] / High-Carbon Steel (C Content Exceeding 0.45%)[○] / Alloy Steel (SCM)[○] / Cast Iron (FC)[○] / Ductile Cast Iron (FCD)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Brass Cast Iron (BsC)[○] / Bronze (PB)[○] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[○] / Cast Magnesium Alloy (MC)[○] / Zinc Alloy Castings (ZDC)[○] / Thermoplastic (PVC, Nylon etc.)[○]Low-Carbon Steel (C Content of 0.25% or Less)[○] / Stainless Steel (SUS)[○] / Copper (Cu)[○] / Brass (Bs)[○] / Rolled Aluminum Material (AL)[◎] / Cast Aluminum Alloy (AC, ADC)[◎] / Zinc Alloy Castings (ZDC)[◎]--
                        Tap ModelHand TapSpiral TapPoint TapSpiral TapSpiral TapSpiral TapPoint TapPoint TapRolled TapDieDie
                        Bore ModelFor Through Holes / For Blind HolesFor Blind HolesFor Through Holes-For Blind HolesFor Blind HolesFor Through HolesFor Through Holes---
                        Coating PresenceNoneIncludedIncluded-NoneIncludedIncludedNoneIncludedNoneNone
                        Coating TypeNon-CoatedOthersOthers-Non-CoatedOthersOthersNon-CoatedTiCNNon-Coated-
                        Overall Length (L)(mm)808080-80100 ~ 150100 ~ 1508070 ~ 80--

                        Loading...

                        1. 1

                        Related Categories to Screw Hole Related Tools