(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Carbide Solid Drill Bits - Straight Shank, for Cast Iron Machining, SSN
OKAZAKI
It is a drill with X thinning shaped tip, suitable for drilling cast iron and nonferrous metals.
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Aqua Drill EX Bit, for Counter Boring, AQDEXZ
Nachi-Fujikoshi
180° flat multifunctional carbide drill.
[Features]
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· Can support a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.
Days to Ship: | Same day or more |
---|
Show Stock Products
HSS Solid Drill Bits - Straight/End Mill Shank, EX-SUS-GDS, Stub
OSG
Ideal for stainless steel, mild steel, copper alloy, etc.
Days to Ship: | Same day or more |
---|
Show Stock Products
Carbide Step Drill Bits - Straight Shank, Chamfering Blade, TiAlN Coated
MISUMI
A stepped drill reduces the number of machining steps, allowing for higher-efficiency drilling
Days to Ship: | 8 Days or more |
---|
HSS Step Drill Bits - Taper Shank, Helix, Right-Angle, R-Type, DCB-TRM
EIKOSHA
[Features]
· A stepped HSS drill capable of counterboring hex bolt heads.
· Tapered shank.
* Be sure to check the bolt cap's maximum diameter and drill counterbore diameter.
Days to Ship: | 9 Days or more |
---|
Carbide Solid Drill Bits - Straight Shank, for Precision Machining, WX-MS-GDS, Ultra Small
OSG
Achieves high precision and high performance for drilling ultra-fine diameters for precision equipment or IT components
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Micro Drill Bit, Long Flute Length, ADRL-SV
ATOM
A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
Days to Ship: | Same day or more |
---|
Show Stock Products
Carbide Step Drill Bits - Straight Shank, Chamfering Blade, R Type
MISUMI
The desired stepped drill can be ordered without a drawing. Delivered in a short delivery time
Days to Ship: | 15 Days or more |
---|
Carbide Solid Drill Bits - Micro Drill Bit, Short Flute Length, ADRS-SV
ATOM
A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - Straight/End Mill Shank, TiN Coated, EX-GDR, Regular
OSG
High-versatility type capable of non-step high-speed machining of up to 4 to 5 times the diameter
Days to Ship: | Same day or more |
---|
Show Stock Products
Carbide Solid Drill Bits - Union Tool Drill Bit, UDCMX
UNION TOOL
•Overall Length (L) (mm): 38
•Coating Type: Others
Days to Ship: | 9 Days or more |
---|
Carbide Step Drill Bits - End Mill Shank, Burnishing Drill
MISUMI
Achieve high-precision drilling of aluminum without a pilot hole
Days to Ship: | 10 Days or more |
---|
HSS Taper Shank Drill Bits - 118 Degree Point Angle, TD, Regular
MISUMI
General purpose tapered shank drills that facilitate machining are available in an array of 71 sizes
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - Straight Long Drill Bit
SAITOTWISTDRILL
•Tool Material Type: High-Speed Steel
•Coating Type: Non-Coated
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - for Non-Ferrous Metal Machining, NF-GDN, Medium
OSG
Enables cost-effective and high-speed drilling of aluminum castings, aluminum die cast, and aluminum extruded materials that are widely used in automobiles and aircraft
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Straight Shank, Hard Cut Drill Bit, HC
SANDVIK
Unique shape exhibits high performance
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Aqua Drill EX Bit, Flat Type, AQDEXZLS, Long
Nachi-Fujikoshi
180° flat multifunctional carbide drill.
[Features]
· Flat drill 10D type with excellent drilling performance.
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· A multi-functional drill that is capable of supporting a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - End Mill Shank, 3 Flute Drill, TiAlN Coated, Stub, Regular
MISUMI
High-concentricity 3-flute drill* In case of poor chip flow, perform step processing according to chip flow
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - End Mill Shank, for Stainless Steel Machining, TiAlN Coated
MISUMI
High-durability composite helix drill that's ideal for drilling stainless steel
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - Straight Shank, 118 Degree Point Angle, Regular【5-10 Pieces Per Package】
MISUMI
A low-priced package offering a carefully selected assortment of our most frequently used sizes (C-Value)
Days to Ship: | Same day or more |
---|
Show Stock Products
Carbide Solid Drill Bits - MQL Long Drill Bit, TiAlN Coated, 30 x D with Oil Hole, RT100T 6513
GUHRING
Specially designed MQL compatible groove shapes and blade tips, realizing high accuracy and high efficiency deep hole drilling.
Days to Ship: | 27 Days or more |
---|
HSS Solid Drill Bits - Straight Shank, Taper Pin Drill, TPD
EIKOSHA
[Features]
· HSS drill for 1/50 tapered pins.
· A straight shank.
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - Straight Shank, TiN Coated, Regular, G-SD【1-10 Pieces Per Package】
MISUMI
Pack and individual G-SD/SD/SDC series standard drill options.
Days to Ship: | 8 Days or more |
---|
Carbide Step Drill Bit, With Custom Dimensions
MISUMI
[Features]
・Introducing a standard shank type with a tip diameter / large diameter custom dimensions type to a customizable step drill bits with helical flutes.
Days to Ship: | 12 Days or more |
---|
HSS Solid Drill Bits - Straight/End Mill Shank, TiAlN Coated, AG-SUS Drill Bit, Short
Nachi-Fujikoshi
Drill capable of stable hole drilling with AG coating excellent in heat resistance.
[Features]
· Newly developed optimal drill shape adopted for machining high alloy HSS, AG coatings, and stainless steel.
· It has a cutting edge shape that's excellent in the segmentation of chips and a groove shape that achieves both high chip discharge performance and drill rigidity.
· Stable machining accuracy is achieved by using a high-precision end mill shank.
[Applications]
· Optimal for stainless steel.
Days to Ship: | Same day or more |
---|
Show Stock Products
Carbide Solid Drill Bits - Micro Revolution Drill Bit, for Stainless Steel Machining, MRS-GDL
OSG
Ideal for small diameter stainless steel processing
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - End Mill Shank, TiN Coated, MT-SUS-GDR
OSG
MT shank is added, expanding the usage in general purpose machines.
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - Straight Shank, TiN Coated, EX-GDXL, Long
OSG
High-rigidity parabolic groove enables deep drilling of up to 7 to 10 times the diameter
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Straight Shank, Cemented Carbide, Stub, DIXI1130
DIXI
•Tool Material Type: Carbide
•Link Model: Straight Link
•Torsional Angle: 24
•Tip Angle (°): 118
•Diameter Tolerance: h6
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Straight Shank, Standard Solid Drill Bit, ADS
ATOM
A high-quality general-purpose drill which can support a wide range of materials, from steel/non-ferrous to resin. Versatile type that allows high performance to be achieved not only in high-speed cutting but also in low-speed cutting.
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - End Mill Shank, TiAlN Coated, S-Type
MISUMI
Precision deep hole drilling is made possible by well-balanced models optimized for the top-grade high-speed steel
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Aqua Drill EX Bit, with Oil Hole, 5D, AQDEXOH5D
Nachi-Fujikoshi
Aqua Drill EX series solid carbide drills with internal coolant.
[Features]
· Product lineup is for 3D, 5D and 8D boring depths.
· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
· Aqua EX coating achieves stable long life.
· Capable of stable wet processing and MQL processing.
· For highly-efficient hole drilling up to 5 times the drill diameter.
[Applications]
· Ideal for stable processing of mild steel to high hardness materials, as well as work materials with difficult chip processing.
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Aqua Micro Drill, AQMD
Nachi-Fujikoshi
A drill that is difficult to break and stable for machining.
[Features]
· Employs cemented carbide ideal for small diameter hole drilling.
· A drill with high rigidity is used.
· The cutting load has been reduced by circumferential clearance and thinning.
[Applications]
· Hard to break and capable of stable processing thanks to the high-rigidity shape and the use of carbide alloy ideal for small diameter drilling work.
Days to Ship: | 7 Days or more |
---|
Show Stock Products
HSS Solid Drill Bits - Straight/End Mill Shank, TiCN Coated, SG-ESS Drill Bit, SGESS
Nachi-Fujikoshi
High-grade powdered high-speed steel and SG coating allows this HSS drill to have the longest life possible.
[Features]
· Optimized cutting edge, groove shape and high precision achieve stable processing and high hole positioning accuracy.
· Achieves high-efficiency machining based on high speed and high feed.
[Applications]
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum, enabling high precision drilling.
Days to Ship: | Same day or more |
---|
Show Stock Products
Carbide Solid Drill Bits - DLC Drill Bit, for Aluminum Machining, DLCDR, Regular
Nachi-Fujikoshi
A drill for high-speed wet machining and dry machining of aluminum alloys.
[Features]
· It utilizes DLC coating (diamond-like carbon) with high hardness, a low coefficient of friction and abrasion resistance.
· Dry machining of aluminum alloy is possible.
· Melting induced adhesion is minimal due to the low friction coefficient of the DLC coating and special groove shape, also making chips less likely to clog.
· Allows also non-step boring of hole depth 5D.
[Applications]
· Capable of dry machining of aluminum alloy, and non-step machining of hole depths up to 3D.
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Straight Shank, for High Hardness Steel, FTO-H-GDXL, Extra Long
OSG
Achieves 20D deep drilling of high hardness mold materials (45 to 55 HRC) with high stability, long life, and high efficiency
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Straight Shank, for High Hardness Steel, 3-Flute, FHL-GDTS, Long
OSG
Enables highly accurate machining of ultra-deep holes of 10 to 20 D in hardened steel which conventionally was only possible via electric discharge machining, realizing a great reduction in total drilling time.
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - End Mill Shank, TiN Coated, EX-SUS-GDN, Medium
OSG
Ideal for stainless steel, mild steel, copper alloy, etc.
Days to Ship: | Same day or more |
---|
Show Stock Products
HSS Solid Drill Bits - End Mill Shank, V-Coated, V-MT-GDN
OSG
V-coated tapered shank and medium type drill with special attention given to reducing thrust and improving usability with lathes
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - End Mill Shank, Micro Drill Bit, TiAlN Coated, NSMD
NS TOOL
•Tool Material Type: Carbide
•Overall Length (L) (mm): 40
•Link Model: End Mill Link
•Coating Presence: Included
•Coating Type: TiAlN
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - for High Hardness Steel, WH70-DRL
OSG
Ideal for processing from 55 to 70 HRC. A drill for ultra-high-hardness steel in which stable processing by highly reliable cutting edge shape and coating for high-hardness steel are combined.
Days to Ship: | 8 Days or more |
---|
Carbide Edged Tip Taper Shank Drill
FUKUDA
•Link Model: Tapered Link
•Torsion Angle (θ) (°): Torsion (20°)
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - End Mill Shank, Spiral Gun Barrel Bit, Carbide
IWATATOOL
Ideal for aluminum, brass, and resin. The high torsion design dramatically reduces burrs. Compared to conventional crescent drills, chipping discharge, cutting performance and life have been greatly improved. 1-flute design provides outstanding machining precision.
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Straight Shank, TiAlN Coated
ATOM
ADS standard type with a TiAlN coating achieves a long life and consistent machining. It is also possible to drill hardened steel of up to 50 HRC, for which machining was difficult with standard non-coated products.
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Straight Shank, Extra Long, ADLL
ATOM
ADS standard straight shank drill extra-long type.
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Hole Diameter (Drilling Diameter) D(mm) |
Groove Length (ℓ)(mm) |
Work Material |
Tool Material Type |
Overall Length (L)(mm) |
Link Model |
Coating Presence |
Coating Type |
Oil-Hole Presence |
| |||||||||||||||||||||||||||||||||||||||||||||
Brand | OKAZAKI | Nachi-Fujikoshi | OSG | MISUMI | EIKOSHA | OSG | ATOM | MISUMI | ATOM | OSG | UNION TOOL | MISUMI | MISUMI | SAITOTWISTDRILL | OSG | SANDVIK | Nachi-Fujikoshi | MISUMI | MISUMI | MISUMI | GUHRING | EIKOSHA | MISUMI | MISUMI | Nachi-Fujikoshi | OSG | OSG | OSG | DIXI | ATOM | MISUMI | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | OSG | OSG | OSG | OSG | NS TOOL | OSG | FUKUDA | IWATATOOL | ATOM | ATOM |
Product Series | Carbide Solid Drill Bits - Straight Shank, for Cast Iron Machining, SSN | Carbide Solid Drill Bits - Aqua Drill EX Bit, for Counter Boring, AQDEXZ | HSS Solid Drill Bits - Straight/End Mill Shank, EX-SUS-GDS, Stub | Carbide Step Drill Bits - Straight Shank, Chamfering Blade, TiAlN Coated | HSS Step Drill Bits - Taper Shank, Helix, Right-Angle, R-Type, DCB-TRM | Carbide Solid Drill Bits - Straight Shank, for Precision Machining, WX-MS-GDS, Ultra Small | Carbide Solid Drill Bits - Micro Drill Bit, Long Flute Length, ADRL-SV | Carbide Step Drill Bits - Straight Shank, Chamfering Blade, R Type | Carbide Solid Drill Bits - Micro Drill Bit, Short Flute Length, ADRS-SV | HSS Solid Drill Bits - Straight/End Mill Shank, TiN Coated, EX-GDR, Regular | HSS Taper Shank Drill Bits - 118 Degree Point Angle, TD, Regular | Carbide Solid Drill Bits - for Non-Ferrous Metal Machining, NF-GDN, Medium | Carbide Solid Drill Bits - Straight Shank, Hard Cut Drill Bit, HC | Carbide Solid Drill Bits - Aqua Drill EX Bit, Flat Type, AQDEXZLS, Long | Carbide Solid Drill Bits - End Mill Shank, 3 Flute Drill, TiAlN Coated, Stub, Regular | Carbide Solid Drill Bits - End Mill Shank, for Stainless Steel Machining, TiAlN Coated | HSS Solid Drill Bits - Straight Shank, 118 Degree Point Angle, Regular【5-10 Pieces Per Package】 | Carbide Solid Drill Bits - MQL Long Drill Bit, TiAlN Coated, 30 x D with Oil Hole, RT100T 6513 | HSS Solid Drill Bits - Straight Shank, TiN Coated, Regular, G-SD【1-10 Pieces Per Package】 | HSS Solid Drill Bits - Straight/End Mill Shank, TiAlN Coated, AG-SUS Drill Bit, Short | Carbide Solid Drill Bits - Micro Revolution Drill Bit, for Stainless Steel Machining, MRS-GDL | HSS Solid Drill Bits - End Mill Shank, TiN Coated, MT-SUS-GDR | HSS Solid Drill Bits - Straight Shank, TiN Coated, EX-GDXL, Long | Carbide Solid Drill Bits - Straight Shank, Cemented Carbide, Stub, DIXI1130 | Carbide Solid Drill Bits - Straight Shank, Standard Solid Drill Bit, ADS | Carbide Solid Drill Bits - Aqua Drill EX Bit, with Oil Hole, 5D, AQDEXOH5D | HSS Solid Drill Bits - Straight/End Mill Shank, TiCN Coated, SG-ESS Drill Bit, SGESS | Carbide Solid Drill Bits - DLC Drill Bit, for Aluminum Machining, DLCDR, Regular | Carbide Solid Drill Bits - Straight Shank, for High Hardness Steel, FTO-H-GDXL, Extra Long | Carbide Solid Drill Bits - Straight Shank, for High Hardness Steel, 3-Flute, FHL-GDTS, Long | HSS Solid Drill Bits - End Mill Shank, TiN Coated, EX-SUS-GDN, Medium | Carbide Solid Drill Bits - End Mill Shank, Micro Drill Bit, TiAlN Coated, NSMD | Carbide Solid Drill Bits - for High Hardness Steel, WH70-DRL | Carbide Solid Drill Bits - End Mill Shank, Spiral Gun Barrel Bit, Carbide | |||||||||||
Days to Ship | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 9 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 15 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 9 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 27 Days or more | 8 Days or more | 8 Days or more | 12 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
7 Days or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Hole Diameter (Drilling Diameter) D(mm) | 0.5 ~ 13 | 0.5 ~ 20 | 0.5 ~ 32 | 3.4 ~ 10.3 | 5.3 ~ 25 | 0.2 ~ 5 | 0.03 ~ 3 | - | 0.1 ~ 2.99 | 2.05 ~ 30 | 0.4 ~ 3.5 | - | 8.5 ~ 50 | 0.45 ~ 7.05 | 3 ~ 13 | 2 ~ 6 | 3 ~ 20 | 2 ~ 13 | 3 ~ 10 | 1 ~ 13 | 3 ~ 10 | 1.98 ~ 19.95 | 0.2 ~ 13 | - | 1 ~ 20 | 0.5 ~ 3 | 6 ~ 50 | 2 ~ 13 | 0.4 ~ 14 | 0.3 ~ 13 | 2 ~ 13 | 1 ~ 16 | 0.2 ~ 1.99 | 0.57 ~ 20 | 2 ~ 12 | 6 ~ 10 | 1 ~ 3 | 1.01 ~ 1.95 | 6 ~ 32 | 0.01 ~ 0.1 | 2 ~ 12 | 6 ~ 60 | 0.1 ~ 3 | 0.3 ~ 6 | 0.3 ~ 13 |
Groove Length (ℓ)(mm) | 6 ~ 60 | 1.65 ~ 90 | 3 ~ 90 | 21 ~ 72 | 22 ~ 70 | 1.5 ~ 26 | 0.6 ~ 40 | - | 0.6 ~ 12 | 24 ~ 155 | 4 ~ 12 | - | 75 ~ 220 | 10 ~ 90 | 25 ~ 76 | - | 14 ~ 90 | 12 ~ 77 | 28 ~ 61 | 12 ~ 101 | 100 ~ 327 | 2 ~ 22 | 3 ~ 101 | - | 6 ~ 94 | 6 ~ 36 | 57 ~ 200 | 40 ~ 200 | 6 ~ 37 | 4 ~ 50 | 24 ~ 101 | 8 ~ 128 | 2.5 ~ 15 | 3 ~ 94 | 15 ~ 73 | 140 ~ 230 | 5 ~ 15 | 9 ~ 18 | 43 ~ 128 | 0.1 ~ 1 | 12 ~ 76 | 30 ~ 222 | 0.6 ~ 16.8 | 4 ~ 40 | 15 ~ 120 |
Work Material | General Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | General Steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Aluminum[○] / Resin[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Aluminum[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[◎] / Aluminum[○] | - | Cast Iron[○] / Aluminum[◎] / Copper[○] | General Steel[○] | - | Cast Iron[◎] / Aluminum[◎] / Copper[○] | - | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] | Stainless Steel[◎] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | - | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Stainless Steel[◎] / Aluminum[○] / Titanium[○] / Copper[○] | Stainless Steel[◎] | General Steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[◎] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[◎] / Aluminum[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Stainless Steel[◎] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | Aluminum[◎] / Copper[○] | High-Hardness Steel[◎] | Heat-Treated Steel[○] / High-Hardness Steel[◎] | General Steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[○/◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | High-Hardness Steel[◎] | Cast Iron[◎] / Aluminum[○] | General Steel[○] / Aluminum[○] / Titanium[○] / Copper[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Resin[◎] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Resin[◎] |
Tool Material Type | Carbide | Carbide | High-Vanadium High-Speed Steel | Carbide | High-Speed Steel | Carbide | Carbide | Carbide | Carbide | Cobalt High-Speed Steel | - | Carbide | High-Speed Steel | High-Speed Steel | Carbide | - | Carbide | Carbide | Carbide | High-Speed Steel | Carbide | Cobalt High-Speed Steel | High-Speed Steel / Cobalt High-Speed Steel | Carbide | High-Speed Steel | Carbide | High-Vanadium High-Speed Steel | Cobalt High-Speed Steel | Carbide | Carbide | Powdered High-Speed Steel | Carbide | Carbide | High-Speed Steel | Carbide | Carbide | Carbide | High-Vanadium High-Speed Steel | High-Vanadium High-Speed Steel | Carbide | Carbide | - | Carbide | Carbide | Carbide |
Overall Length (L)(mm) | 45 ~ 118 | 47 ~ 145 | 38 ~ 170 | 73 ~ 136 | 120 ~ 275 | 38 ~ 64 | 38 ~ 65 | - | 38 | 56 ~ 235 | 38 ~ 50 | 40 ~ 60 | 156 ~ 369 | 75 ~ 200 | 59 ~ 128 | 30 ~ 60 | 100 ~ 250 | 46 ~ 124 | 60 ~ 120 | 34 ~ 151 | 140 ~ 371 | 65 ~ 370 | 19 ~ 151 | - | 40 ~ 168 | 42 ~ 66 | 137 ~ 345 | 100 ~ 300 | 30 ~ 107 | 30 ~ 100 | 56 ~ 161 | 56 ~ 194 | 38 ~ 47 | 38 ~ 168 | 47 ~ 130 | 190 ~ 280 | 57 ~ 65 | 41 ~ 50 | 123 ~ 248 | 40 | 42 ~ 120 | 110 ~ 412 | 50 | 30 ~ 80 | 75 ~ 250 |
Link Model | Straight Link | End Mill Link / Straight Link | End Mill Link / Straight Link | Straight Link | Tapered Link | End Mill Link / Straight Link | End Mill Link | Straight Link | End Mill Link | End Mill Link / Straight Link | - | End Mill Link | Tapered Link | - | End Mill Link / Straight Link | Straight Link | End Mill Link | End Mill Link | End Mill Link | Straight Link | - | Straight Link | Straight Link | End Mill Link | End Mill Link / Straight Link | End Mill Link / Straight Link | End Mill Link | Straight Link | Straight Link | Straight Link | End Mill Link | End Mill Link / Straight Link | End Mill Link | End Mill Link / Straight Link | End Mill Link / Straight Link | Straight Link | End Mill Link / Straight Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link / Straight Link | Tapered Link | End Mill Link | Straight Link | Straight Link |
Coating Presence | None | Included | Included | Included | None | Included | Included | None | Included | Included | - | None | None | None | None | - | Included | Included | Included | None | Included | None | Included / None | None | Included | Included | Included | Included | None | None | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | None | None | Included | None |
Coating Type | Non-Coated | Others | TiN | TiAlN | - | Others | For General Steel (AlCrN etc.) | - | For General Steel (AlCrN etc.) | TiN | Others | - | - | Non-Coated | Non-Coated | - | Others | TiAlN | TiAlN | - | TiAlN | - | TiN | - | TiAlN | Others | TiN | TiN | - | Non-Coated | TiAlN | Others | Others | TiCN | DLC | Others | Others | TiN | Others | TiAlN | Others | - | Non-Coated | TiAlN | Non-Coated |
Oil-Hole Presence | None | None | None | None | None | None | None | None | None | None | - | None | None | None | None | None | Included / None | None | None | None | Included | None | None | None | None | None | None | None | None | None | Included / None | Included | None | None | None | Included | None | None | None | None | None | None | None | None | None |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy