(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Carbide Solid Drill Bits - Aqua Drill EX Bit, for Counter Boring, AQDEXZ
Nachi-Fujikoshi
180° flat multifunctional carbide drill.
[Features]
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· Can support a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.
Days to Ship: | Same day or more |
---|
Show Stock Products
HSS Solid Drill Bits - Straight/End Mill Shank, EX-SUS-GDS, Stub
OSG
Ideal for stainless steel, mild steel, copper alloy, etc.
Days to Ship: | Same day or more |
---|
Show Stock Products
Carbide Solid Drill Bits - Straight Shank, for Cast Iron Machining, SSN
OKAZAKI
It is a drill with X thinning shaped tip, suitable for drilling cast iron and nonferrous metals.
Days to Ship: | 9 Days or more |
---|
Carbide Solid Drill Bits - End Mill Shank, Burnishing Drill
MISUMI
Achieve high-precision drilling of aluminum without a pilot hole
Days to Ship: | 10 Days or more |
---|
HSS Step Drill Bits - Taper Shank, Helix, Right-Angle, R-Type, DCB-TRM
EIKOSHA
[Features]
· A stepped HSS drill capable of counterboring hex bolt heads.
· Tapered shank.
* Be sure to check the bolt cap's maximum diameter and drill counterbore diameter.
Days to Ship: | 9 Days or more |
---|
HSS Taper Shank Drill Bits - 118 Degree Point Angle, TD, Regular
MISUMI
General purpose tapered shank drills that facilitate machining are available in an array of 71 sizes
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Straight Shank, for Precision Machining, WX-MS-GDS, Ultra Small
OSG
Achieves high precision and high performance for drilling ultra-fine diameters for precision equipment or IT components
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Aqua Micro Drill, AQMD
Nachi-Fujikoshi
A drill that is difficult to break and stable for machining.
[Features]
· Employs cemented carbide ideal for small diameter hole drilling.
· A drill with high rigidity is used.
· The cutting load has been reduced by circumferential clearance and thinning.
[Applications]
· Hard to break and capable of stable processing thanks to the high-rigidity shape and the use of carbide alloy ideal for small diameter drilling work.
Days to Ship: | 7 Days or more |
---|
Show Stock Products
Carbide Solid Drill Bits - End Mill Shank, Double Margin Drill, TiAlN Coated
MISUMI
Double margin for high accuracy and stable machining
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - Straight Shank, TiN Coated, Regular, YG-SD【5-10 Pieces Per Package】
MISUMI
A carefully selected assortment of 48 of our most frequently used sizes are available at low price (C-Value)
Days to Ship: | 8 Days or more |
---|
MISUMI
Straight shank series of the popular high-speed, high-feed machining drill
Days to Ship: | 8 Days or more |
---|
Carbide Step Drill Bits - Straight Shank, Chamfering Blade, TiAlN Coated
MISUMI
A stepped drill reduces the number of machining steps, allowing for higher-efficiency drilling
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - Straight Shank, Cobalt Drill Bit, COSD
Nachi-Fujikoshi
A general-purpose cobalt drill that can handle anything from steel to stainless steel.
[Features]
· Consistent drill bite due to the X-type thinning.
· Sharpness is increased by reinforcing the drill torsion angle.
· White surface less than 2.0 mm in diameter (not colored).
[Applications]
· Can be used for a wide range of materials, from steel to stainless steel.
Days to Ship: | Same day |
---|
Show Stock Products
HSS Solid Drill Bits - Straight/End Mill Shank, TiN Coated, EX-GDR, Regular
OSG
High-versatility type capable of non-step high-speed machining of up to 4 to 5 times the diameter
Days to Ship: | Same day or more |
---|
Show Stock Products
Carbide Step Drill Bits - End Mill Shank, 2 Flutes, KDD-2
KYOWASEIKO
Both tip diameter and large diameter have torsional angle of 30°. Lineup of tip diameters from φ0.5 to φ6 in 0.05 increments.
Days to Ship: | 8 Days or more |
---|
Carbide Step Drill Bits - End Mill Shank, Burnishing Drill
MISUMI
Achieve high-precision drilling of aluminum without a pilot hole
Days to Ship: | 10 Days or more |
---|
Carbide Step Drill Bits - Straight Shank, Chamfering Blade, R Type
MISUMI
The desired stepped drill can be ordered without a drawing. Delivered in a short delivery time
Days to Ship: | 15 Days or more |
---|
Carbide Step Drill Bit, With Custom Dimensions
MISUMI
[Features]
・Introducing a standard shank type with a tip diameter / large diameter custom dimensions type to a customizable step drill bits with helical flutes.
Days to Ship: | 12 Days or more |
---|
HSS Solid Drill Bits - Straight Shank, TiN Coated, G Long Drill Bit, GLSD
Nachi-Fujikoshi
Coated drill for deep holes.
[Features]
· It discharges chips well, making it ideal for drilling deep holes and deep positions.
· Chip-flow is improved while maintaining rigidity thanks to its non-stepped slot shape.
· TiN coating adopted to achieve a longer life even for deep holes.
[Applications]
· It discharges cutting chips well even for deep holes, enabling high-efficiency machining.
Days to Ship: | Same day or more |
---|
Show Stock Products
Carbide Solid Drill Bits - Micro Drill Bit, Short Flute Length, ADRS-SV
ATOM
A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Micro Drill Bit, for Precision Machining, ADR
ATOM
A drill for precision multiporous machining. (Min. diameter φ0.02), Can be used for a wide range of applications including general steel, non-ferrous metals, and resins.
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Straight/End Mill Shank, Flat Type, ADF-2D
OSG
[Features]
· Can be used in various applications such as counterboring of inclined and curved surfaces and semi-split hole drilling.
· The wear-resistant layer suppresses abrasion and prevents crack propagation due to the periodic nano-layered coating.
· The original bottom edge shape reduces the cutting resistance and achieves stable processing.
Days to Ship: | 8 Days or more |
---|
Carbide Step Drill Bits - Straight Shank, DLC Coated, Stub
MISUMI
Reducing the number of steps enables higher efficiency drilling of pilot holes
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - Straight Shank, 118 Degree Point Angle, Regular【5-10 Pieces Per Package】
MISUMI
A low-priced package offering a carefully selected assortment of our most frequently used sizes (C-Value)
Days to Ship: | Same day or more |
---|
Show Stock Products
HSS Solid Drill Bits - Straight Shank, TiN Coated, Regular, G-SD【1-10 Pieces Per Package】
MISUMI
Pack and individual G-SD/SD/SDC series standard drill options.
Days to Ship: | 8 Days or more |
---|
Carbide Burnishing Drill Bit, Long Shank Type
MISUMI
[Features]
・Ideal for step drilling aluminum.
・Long shank types are now available.
Days to Ship: | 10 Days or more |
---|
Carbide Solid Drill Bits - for Non-Ferrous Metal Machining, NF-GDN, Medium
OSG
Enables cost-effective and high-speed drilling of aluminum castings, aluminum die cast, and aluminum extruded materials that are widely used in automobiles and aircraft
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - End Mill Shank, TiN Coated, EX-SUS-GDN, Medium
OSG
Ideal for stainless steel, mild steel, copper alloy, etc.
Days to Ship: | Same day or more |
---|
Show Stock Products
HSS Solid Drill Bits - Straight/End Mill Shank, EX-SUS-GDR, Regular
OSG
Regular groove length series ideal for stainless steel, mild steel, aluminum alloy, copper alloy, etc.
Days to Ship: | Same day or more |
---|
Show Stock Products
Carbide Edged Tip Taper Shank Drill
FUKUDA
•Link Model: Tapered Link
•Torsion Angle (θ) (°): Torsion (20°)
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - Straight Long Drill Bit
SAITOTWISTDRILL
•Tool Material Type: High-Speed Steel
•Coating Type: Non-Coated
Days to Ship: | 9 Days or more |
---|
Carbide Solid Drill Bits - Aqua Drill EX Bit, with Flat Radius, AQDEXZ-R
Nachi-Fujikoshi
[Features]
· Drill with excellent drilling performance for counterboring.
· Ideal for inclined surfaces and tap pilot hole drilling.
· Recommended for hole depth 2D (twice the diameter) or less.
Days to Ship: | 9 Days or more |
---|
Carbide Solid Drill Bits - End Mill Shank, TiAlN Coated, Stub with Oil Holes, Regular
MISUMI
Drill with burnishing blade for one-shot machining down to hole finishing
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - End Mill Shank, Corrugated Cutting Edge, TiAlN Coated, Stub
MISUMI
Offering a full assortment of standard drills effective for iron-based materials in 0.1mm increments at ultra-low cost
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - End Mill Shank, Corrugated Cutting Edge, TiAlN Coated, Regular
MISUMI
Performing three rake + R thinning results in high concentricity.
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Straight Shank, with Corner Radius, TiAlN Coated, Stub, Regular
MISUMI
Straight shank type drill with corner radius
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Straight Shank, TiAlN Coated, Long
MISUMI
Carbide long drill for high-efficiency deep-hole drilling
Days to Ship: | 8 Days or more |
---|
MISUMI
Small radius version of the high-hardness steel series
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - Straight Shank, for Difficult-to-Cut Materials, TiN Coated, Long
MISUMI
A long version of the popular drill for difficult-to-cut materials
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - Straight Shank, TiN Coated, G Short Drill Bit, GSS
Nachi-Fujikoshi
Short type straight shank drill with a TiN coated surface.
[Features]
· The original thinning shape (3-rake) improves centripedality and chip separation.
· TiN coating achieves longer life.
[Applications]
· Capable of high efficiency machining of materials ranging from steel to stainless steel and aluminum. High positional accuracy can be obtained.
Days to Ship: | Same day or more |
---|
Show Stock Products
Carbide Solid Drill Bits - Aqua Drill EX Bit, AQDEXR, Regular
Nachi-Fujikoshi
Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.
[Features]
· Shape of the new cutting edge greatly improves chip discharge performance.
· The cutting resistance is reduced to provide stable machining even on small machines.
· A special lubrication function film is provided on the surface layer of the AlCrSi coating.
· Longer life by improving lubricity and heat/abrasion resistance.
· The unique thinning shape increases biting and reduces cutting resistance.
[Applications]
· Ideal for thin work materials and small low-rigidity processing machines.
Days to Ship: | Same day or more |
---|
Show Stock Products
Carbide Solid Drill Bits - Aqua Drill Bit, for High Hardness Steel, AQDH
Nachi-Fujikoshi
Carbide drill capable of high efficiency machining of high-hardness steel of 50 to 70 HRC.
[Features]
· It uses carbide alloy ideal for high-hardness steel machining and AquaCoat, which has excellent heat resistance and abrasion resistance.
· Wear resistance and chipping resistance are greatly improved.
· Uses a thick core and weak torsion.
· The high rigidity makes it resistant against vibration as well, preventing damage from microchipping, etc.
[Applications]
· High performance machining of 50 to 70 HRC high hardness steel is possible.
Days to Ship: | Same day or more |
---|
Show Stock Products
HSS Solid Drill Bits - Straight Shank, LSD, Long
Nachi-Fujikoshi
A general purpose long drill bit used over the widest range of applications.
[Features]
· The optimal drill bit for machining can be selected, supporting a diverse range of drill depths and an abundant range of sizes (groove length, overall length).
Days to Ship: | Same day or more |
---|
Show Stock Products
HSS Solid Drill Bits - Straight/End Mill Shank, TiCN Coated, SG-ESS Drill Bit, SGESS
Nachi-Fujikoshi
High-grade powdered high-speed steel and SG coating allows this HSS drill to have the longest life possible.
[Features]
· Optimized cutting edge, groove shape and high precision achieve stable processing and high hole positioning accuracy.
· Achieves high-efficiency machining based on high speed and high feed.
[Applications]
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum, enabling high precision drilling.
Days to Ship: | Same day or more |
---|
Show Stock Products
HSS Solid Drill Bits - Straight/End Mill Shank, TiN Coated, EX-GDS, Stub
OSG
Thanks to its high-rigidity groove form and stub groove length, it provides high efficiency and high precision and is ideal for pilot hole tapping and lathe processing.
Days to Ship: | Same day or more |
---|
Show Stock Products
Brand |
---|
Product Series |
Days to Ship |
Hole Diameter (Drilling Diameter) D(mm) |
Groove Length (ℓ)(mm) |
Work Material |
Tool Material Type |
Overall Length (L)(mm) |
Link Model |
Coating Presence |
Coating Type |
Oil-Hole Presence |
Brand | Nachi-Fujikoshi | OSG | OKAZAKI | MISUMI | EIKOSHA | MISUMI | OSG | Nachi-Fujikoshi | MISUMI | MISUMI | MISUMI | MISUMI | Nachi-Fujikoshi | OSG | KYOWASEIKO | MISUMI | MISUMI | MISUMI | Nachi-Fujikoshi | ATOM | ATOM | OSG | MISUMI | MISUMI | MISUMI | MISUMI | OSG | OSG | OSG | FUKUDA | SAITOTWISTDRILL | Nachi-Fujikoshi | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | OSG |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Carbide Solid Drill Bits - Aqua Drill EX Bit, for Counter Boring, AQDEXZ | HSS Solid Drill Bits - Straight/End Mill Shank, EX-SUS-GDS, Stub | Carbide Solid Drill Bits - Straight Shank, for Cast Iron Machining, SSN | HSS Step Drill Bits - Taper Shank, Helix, Right-Angle, R-Type, DCB-TRM | HSS Taper Shank Drill Bits - 118 Degree Point Angle, TD, Regular | Carbide Solid Drill Bits - Straight Shank, for Precision Machining, WX-MS-GDS, Ultra Small | Carbide Solid Drill Bits - End Mill Shank, Double Margin Drill, TiAlN Coated | HSS Solid Drill Bits - Straight Shank, TiN Coated, Regular, YG-SD【5-10 Pieces Per Package】 | Carbide Step Drill Bits - Straight Shank, Chamfering Blade, TiAlN Coated | HSS Solid Drill Bits - Straight Shank, Cobalt Drill Bit, COSD | HSS Solid Drill Bits - Straight/End Mill Shank, TiN Coated, EX-GDR, Regular | Carbide Step Drill Bits - Straight Shank, Chamfering Blade, R Type | HSS Solid Drill Bits - Straight Shank, TiN Coated, G Long Drill Bit, GLSD | Carbide Solid Drill Bits - Micro Drill Bit, Short Flute Length, ADRS-SV | Carbide Solid Drill Bits - Micro Drill Bit, for Precision Machining, ADR | Carbide Solid Drill Bits - Straight/End Mill Shank, Flat Type, ADF-2D | HSS Solid Drill Bits - Straight Shank, 118 Degree Point Angle, Regular【5-10 Pieces Per Package】 | HSS Solid Drill Bits - Straight Shank, TiN Coated, Regular, G-SD【1-10 Pieces Per Package】 | Carbide Solid Drill Bits - for Non-Ferrous Metal Machining, NF-GDN, Medium | HSS Solid Drill Bits - End Mill Shank, TiN Coated, EX-SUS-GDN, Medium | HSS Solid Drill Bits - Straight/End Mill Shank, EX-SUS-GDR, Regular | Carbide Solid Drill Bits - Aqua Drill EX Bit, with Flat Radius, AQDEXZ-R | Carbide Solid Drill Bits - End Mill Shank, TiAlN Coated, Stub with Oil Holes, Regular | Carbide Solid Drill Bits - End Mill Shank, Corrugated Cutting Edge, TiAlN Coated, Stub | Carbide Solid Drill Bits - End Mill Shank, Corrugated Cutting Edge, TiAlN Coated, Regular | Carbide Solid Drill Bits - Straight Shank, with Corner Radius, TiAlN Coated, Stub, Regular | Carbide Solid Drill Bits - Straight Shank, TiAlN Coated, Long | HSS Solid Drill Bits - Straight Shank, for Difficult-to-Cut Materials, TiN Coated, Long | HSS Solid Drill Bits - Straight Shank, TiN Coated, G Short Drill Bit, GSS | Carbide Solid Drill Bits - Aqua Drill EX Bit, AQDEXR, Regular | Carbide Solid Drill Bits - Aqua Drill Bit, for High Hardness Steel, AQDH | HSS Solid Drill Bits - Straight/End Mill Shank, TiCN Coated, SG-ESS Drill Bit, SGESS | HSS Solid Drill Bits - Straight/End Mill Shank, TiN Coated, EX-GDS, Stub | ||||||||||||
Days to Ship |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 9 Days or more | 10 Days or more | 9 Days or more | 8 Days or more | 8 Days or more |
7 Days or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 10 Days or more | 15 Days or more | 12 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 10 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 9 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Hole Diameter (Drilling Diameter) D(mm) | 0.5 ~ 20 | 0.5 ~ 32 | 0.5 ~ 13 | 0 | 5.3 ~ 25 | 8.5 ~ 50 | 0.2 ~ 5 | 0.2 ~ 1.99 | 1 ~ 11 | 1 ~ 13 | 3 ~ 13 | 3.4 ~ 10.3 | 0.5 ~ 13 | 2.05 ~ 30 | 0.5 ~ 6 | - | - | - | 1 ~ 13 | 0.1 ~ 2.99 | 0.02 ~ 3 | 2 ~ 20 | 6.8 ~ 10.3 | 1 ~ 13 | 0.2 ~ 13 | - | 3 ~ 13 | 1.01 ~ 1.95 | 2 ~ 32 | 6 ~ 60 | 0.45 ~ 7.05 | 3 ~ 12 | 3 ~ 13 | 3 ~ 13 | 3 ~ 13 | 3 ~ 13 | 3 ~ 10 | 0.8 ~ 3 | 2 ~ 13 | 1.6 ~ 20 | 2.1 ~ 16 | 2 ~ 12 | 7.1 ~ 13 | 0.57 ~ 20 | 1 ~ 13 |
Groove Length (ℓ)(mm) | 1.65 ~ 90 | 3 ~ 90 | 6 ~ 60 | 0 | 22 ~ 70 | 75 ~ 220 | 1.5 ~ 26 | 2.5 ~ 15 | 12 ~ 71 | 12 ~ 101 | 16 ~ 78 | 21 ~ 72 | 5 ~ 80 | 24 ~ 155 | 2 ~ 25 | - | - | - | 40 ~ 135 | 0.6 ~ 12 | 0.2 ~ 25 | 10 ~ 88 | 48 ~ 72 | 12 ~ 101 | 3 ~ 101 | - | 25 ~ 76 | 9 ~ 18 | 24 ~ 165 | 30 ~ 222 | 10 ~ 90 | 14 ~ 54 | 20 ~ 60 | 20 ~ 60 | 28 ~ 77 | 16 ~ 77 | 60 ~ 140 | 6 ~ 27 | 56 ~ 134 | 13 ~ 94 | 17 ~ 96 | 12 ~ 51 | 100 ~ 200 | 3 ~ 94 | 6 ~ 51 |
Work Material | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] | General Steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | Cast Iron[○] / Aluminum[◎] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[◎] / Aluminum[○] | General Steel[○] / Heat-Treated Steel[○] / Aluminum[○] | Cast Iron[○] / Aluminum[◎] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Aluminum[○] / Resin[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] / Resin[○] | Cast Iron[○] / Aluminum[◎] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Cast Iron[○] / Aluminum[○] / Copper[○] | Cast Iron[◎] / Aluminum[◎] / Copper[○] | General Steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Stainless Steel[◎] / Aluminum[◎] / Copper[◎] | Cast Iron[◎] / Aluminum[○] | - | General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○] | High-Hardness Steel[◎] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[◎] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Cast Iron[◎] / Aluminum[○] |
Tool Material Type | Carbide | High-Vanadium High-Speed Steel | Carbide | Carbide | High-Speed Steel | High-Speed Steel | Carbide | Carbide | Carbide | High-Speed Steel | Carbide | Carbide | Cobalt High-Speed Steel | Cobalt High-Speed Steel | - | Carbide | Carbide | Carbide | Cobalt High-Speed Steel | Carbide | Carbide | Carbide | Carbide | High-Speed Steel | High-Speed Steel / Cobalt High-Speed Steel | Carbide | Carbide | High-Vanadium High-Speed Steel | High-Vanadium High-Speed Steel | - | High-Speed Steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Carbide | Carbide | High-Speed Steel | High-Speed Steel | Cobalt High-Speed Steel |
Overall Length (L)(mm) | 47 ~ 145 | 38 ~ 170 | 45 ~ 118 | 40 ~ 60 | 120 ~ 275 | 156 ~ 369 | 38 ~ 64 | 38 ~ 47 | 45 ~ 118 | 34 ~ 151 | 46 ~ 137 | 73 ~ 136 | 27 ~ 152 | 56 ~ 235 | 50 ~ 80 | 40 ~ 60 | - | - | 100 ~ 250 | 38 | 38 ~ 50 | 50 ~ 140 | 104 ~ 136 | 34 ~ 151 | 19 ~ 151 | - | 59 ~ 128 | 41 ~ 50 | 56 ~ 245 | 110 ~ 412 | 75 ~ 200 | 50 ~ 90 | 62 ~ 107 | 66 ~ 107 | 66 ~ 124 | 49 ~ 124 | 100 ~ 200 | 47 ~ 67 | 85 ~ 205 | 39 ~ 168 | 49 ~ 160 | 44 ~ 108 | 200 ~ 400 | 38 ~ 168 | 38 ~ 108 |
Link Model | End Mill Link / Straight Link | End Mill Link / Straight Link | Straight Link | End Mill Link | Tapered Link | Tapered Link | End Mill Link / Straight Link | End Mill Link | End Mill Link | Straight Link | Straight Link | Straight Link | Straight Link | End Mill Link / Straight Link | End Mill Link | End Mill Link | Straight Link | End Mill Link | Straight Link | End Mill Link | End Mill Link | End Mill Link / Straight Link | Straight Link | Straight Link | Straight Link | End Mill Link | End Mill Link / Straight Link | End Mill Link | End Mill Link / Straight Link | Tapered Link | - | Straight Link | End Mill Link | End Mill Link | End Mill Link | Straight Link | Straight Link | End Mill Link | Straight Link | Straight Link | End Mill Link / Straight Link | End Mill Link / Straight Link | Straight Link | End Mill Link / Straight Link | End Mill Link / Straight Link |
Coating Presence | Included | Included | None | None | None | None | Included | Included | Included | Included | Included | Included | None | Included | None | None | None | None | Included | Included | None | Included | Included | None | Included / None | None | None | Included | Included | None | None | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | None | Included | Included |
Coating Type | Others | TiN | Non-Coated | - | - | - | Others | Others | TiAlN | TiN | TiAlN | TiAlN | Non-Coated | TiN | - | - | - | - | TiN | For General Steel (AlCrN etc.) | Non-Coated | Others | DLC | - | TiN | - | Non-Coated | TiN | TiN | - | Non-Coated | For General Steel (AlCrN etc.) | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | - | TiN | TiN | Others | Others | Non-Coated | TiCN | TiN |
Oil-Hole Presence | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None | None |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy