(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Nachi-Fujikoshi
A carbide drill that demonstrates outstanding performance in dry processing and high speed wet processing.
[Features]
· Adopts Aquacoat with excellent heat resistance and rich lubrication with the work material.
· Aqua coating and groove shape for excellent chipping discharge, enabling consistent hole drilling.
· Chipping resistance and corner abrasion resistance are improved due to the special cutting edge shape.
· High-speed wet machining is 2 to 3 times that of other companies' products, with dry machining efficiency equal to or greater than that of wet machining.
[Applications]
· Ideal for high-speed and long-life machining for anything from raw materials to high-hardness steel.
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - Straight Shank, SD
Nachi-Fujikoshi
A general-purpose HSS drill which is used for the widest range of applications.
[Features]
· Corresponds to the JIS standard.
[Applications]
· Usable in a wide range of applications.
Days to Ship: | Same day or more |
---|
Show Stock Products
Carbide Solid Drill Bits - Aqua Drill FC Bit, AQDFC
Nachi-Fujikoshi
A carbide drill with an optimum design for FC materials that provides a longer service life than conventional products.
[Features]
· Combination of cemented carbide ideal for FC material and Aquacoat with excellent heat and wear resistance.
· Longer life than conventional FC drills.
· The special cutting edge treatment suppresses wear of the corners most easily damaged in FC processing.
· A lifetime of 70% of that of new products is guaranteed after re-grinding, even if there is no recoating.
[Applications]
· Ideal for long life machining of FC, FCD, and low carbon steel.
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - Straight/End Mill Shank, TiN Coated, EX-GDN, Medium
OSG
The groove length is between the stubby and regular sizes and achieves non-step high speed machining up to 4 times the diameter, even for small diameters
Days to Ship: | Same day |
---|
Show Stock Products
HSS Solid Drill Bits - Straight/End Mill Shank, WDI Coated, VPH-GDS, Stub
OSG
Exerts excellent cost performance for tempered steel processing of 40 to 50 HRC
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - for High Hardness Steel, WH70-DRL
OSG
Ideal for processing from 55 to 70 HRC. A drill for ultra-high-hardness steel in which stable processing by highly reliable cutting edge shape and coating for high-hardness steel are combined.
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - for High Hardness Steel, with Oil Hole, WHO55-5D
OSG
Ideal for steel materials and Ni-based alloys up to 55 HRC. Longer machining life is achieved thanks to the oil hole
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Straight Shank, Semi-Long, ADSL
ATOM
A high-quality general-purpose drill which can support a wide range of materials, from steel/non-ferrous to resin. Versatile type that allows high performance to be achieved not only in high-speed cutting but also in low-speed cutting.
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Straight Shank, 3 X D, N 730
GUHRING
[Features]
· Highly versatile carbide solid drill.
· Supports various workpiece materials such as aluminum or general steel.
Days to Ship: | 8 Days or more |
---|
Straight Shank Drill, Semi-Long Type N 211
GUHRING
Versatile tang drill for general applications.
Days to Ship: | 9 Days or more |
---|
HSS Solid Drill Bits - Straight Shank, TiN Coated, N 651, Regular
GUHRING
Versatile coated drill for general drilling applications.
Days to Ship: | 7 Days or more |
---|
Carbide Solid Drill Bits - Straight Shank, 100 mm, GT100 J691
GUHRING
[Features]
· Improves chip dischargeability in mirror finishing of grooves, and offers excellent welding resistance in aluminum machining.
· Internal lubrication enables high performance deep hole drilling without steps.
Days to Ship: | 9 Days or more |
---|
Carbide Solid Drill Bits - Straight Shank, 300 mm, GT100 J685
GUHRING
[Features]
· Improves chip dischargeability in mirror finishing of grooves, and offers excellent welding resistance in aluminum machining.
Days to Ship: | 9 Days or more |
---|
Carbide Solid Drill Bits - Straight Shank, 300 mm, GT100 J695
GUHRING
[Features]
· Improves chip dischargeability in mirror finishing of grooves, and offers excellent welding resistance in aluminum machining.
· Internal lubrication enables high performance deep hole drilling without steps.
Days to Ship: | 9 Days or more |
---|
Carbide Solid Drill Bits - Straight Shank, 300 mm, GT100 J765
GUHRING
[Features]
· Ideal for deep drilling aluminum, aluminum alloy, cast iron, etc.
· Internal lubrication enables high performance deep hole drilling without steps.
Days to Ship: | 27 Days or more |
---|
HSS Solid Drill Bits - Straight Shank, TiN Coated, N 667, Long
GUHRING
A general purpose coated long drill used for general applications.
Days to Ship: | 9 Days or more |
---|
HSS Solid Drill Bits - Straight Shank, Taper Pin Drill, TPD
EIKOSHA
[Features]
· HSS drill for 1/50 tapered pins.
· A straight shank.
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - Straight Shank, for Pipes, PTDS
EIKOSHA
[Features]
· HSS drill for pipes.
· A straight shank.
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - Taper Shank, Counterbore with Drill, DCB
EIKOSHA
[Features]
· 2-flute HSS type.
· Counterboring for hexagon socket head bolts.
· A straight shank.
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Aqua Drill EX Bit, Flat Type, with Oil Hole, 3D, AQDEXZOH3D
Nachi-Fujikoshi
A 180° flat, internally-lubricated type multi-functional carbide drill.
[Features]
· Allows high efficiency flat drilling up to hole depth 3D.
· A drill with oil hole that supports stainless steel.
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· A multi-functional drill that is capable of supporting a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Aqua Drill EX Bit, with Oil Hole, 10D, AQDEXOH10D
Nachi-Fujikoshi
[Features]
· Drill capable of wet machining and MQL machining.
· For highly-efficient hole drilling up to 10 times the drill diameter.
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Aqua Drill EX Bit, Pilot Type, with Oil Hole, AQDEXOHPLT
Nachi-Fujikoshi
[Features]
· Drill for drilling guide holes.
· High bite performance guide hole improves centering during deep hole drilling, giving improved drilling performance.
Days to Ship: | 8 Days or more |
---|
MISUMI
Straight shank series of the popular high-speed, high-feed machining drill
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Straight Shank, TiAlN Coated, Regular
MISUMI
TiAlN coating for high-speed cutting.
Days to Ship: | 8 Days or more |
---|
MISUMI
Excellent processing performance and durability that meet the cutting requirements for machining difficult-to-cut materials
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - Straight Shank, for Difficult-to-Cut Materials, TiN Coated, Long
MISUMI
A long version of the popular drill for difficult-to-cut materials
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - Straight Shank, AG-ESS Drill Bit, AGESS
Nachi-Fujikoshi
Coated high-speed drill that realizes high speeds and high feed rates approaching that of carbide drills.
[Features]
· New AG coating with excellent heat resistance and abrasion resistance is the best match for next generation high alloy high-speed steel.
· 50C type capable of high-speed machining at a cutting speed of 60 m/min.
· The next generation of high alloy steel HSS achieves both anti-chipping performance and friction resistance performance.
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum.
[Applications]
· Convenient for lathes where stable machining of carbide is difficult and low-rigidity processing machines.
Days to Ship: | Same day or more |
---|
Show Stock Products
UG Stainless Steel Drill UGSUS
Nachi-Fujikoshi
This drill is ideal for stainless steel processing. UG coating with excellent heat resistance provides a long service life.
Days to Ship: | Same day |
---|
Show Stock Products
Carbide Solid Drill Bits - Aqua Drill Bit, 3-Flute, AQD3F
Nachi-Fujikoshi
3-flute carbide drill capable of high-precision drilling and reamer-less processing.
[Features]
· High-precision drilling is possible due to the 3-flute cutting edge excellent in cutting balance. It also supports reamer-less processing.
· Aqua Drill 3-Flute has a proprietary thinning shape and good sharpness for minimal cutting resistance.
· Highly lubricating aqua coating and groove shape for excellent chipping discharge without clogging, enabling consistent hole drilling.
[Applications]
· High-precision drilling is made possible by the 3-flute cutting edge with excellent cutting balance and negative corner with high centrality.
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Aqua Drill EX Bit, with Oil Hole, 5D, AQDEXOH5D
Nachi-Fujikoshi
Aqua Drill EX series solid carbide drills with internal coolant.
[Features]
· Product lineup is for 3D, 5D and 8D boring depths.
· Aqua Drill EX based new flute shape adopted to achieve excellent chipping breakup.
· Aqua EX coating achieves stable long life.
· Capable of stable wet processing and MQL processing.
· For highly-efficient hole drilling up to 5 times the drill diameter.
[Applications]
· Ideal for stable processing of mild steel to high hardness materials, as well as work materials with difficult chip processing.
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - Straight Shank, Cobalt Drill Bit, COSD
Nachi-Fujikoshi
A general-purpose cobalt drill that can handle anything from steel to stainless steel.
[Features]
· Consistent drill bite due to the X-type thinning.
· Sharpness is increased by reinforcing the drill torsion angle.
· White surface less than 2.0 mm in diameter (not colored).
[Applications]
· Can be used for a wide range of materials, from steel to stainless steel.
Days to Ship: | Same day |
---|
Show Stock Products
HSS Solid Drill Bits - Straight Shank, TiN Coated, G Short Drill Bit, GSS
Nachi-Fujikoshi
Short type straight shank drill with a TiN coated surface.
[Features]
· The original thinning shape (3-rake) improves centripedality and chip separation.
· TiN coating achieves longer life.
[Applications]
· Capable of high efficiency machining of materials ranging from steel to stainless steel and aluminum. High positional accuracy can be obtained.
Days to Ship: | Same day or more |
---|
Show Stock Products
Carbide Solid Drill Bits - Aqua Drill EX Bit, AQDEXR, Regular
Nachi-Fujikoshi
Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.
[Features]
· Shape of the new cutting edge greatly improves chip discharge performance.
· The cutting resistance is reduced to provide stable machining even on small machines.
· A special lubrication function film is provided on the surface layer of the AlCrSi coating.
· Longer life by improving lubricity and heat/abrasion resistance.
· The unique thinning shape increases biting and reduces cutting resistance.
[Applications]
· Ideal for thin work materials and small low-rigidity processing machines.
Days to Ship: | 8 Days or more |
---|
Show Stock Products
Carbide Solid Drill Bits - DLC Drill Bit, for Aluminum Machining, DLCDR, Regular
Nachi-Fujikoshi
A drill for high-speed wet machining and dry machining of aluminum alloys.
[Features]
· It utilizes DLC coating (diamond-like carbon) with high hardness, a low coefficient of friction and abrasion resistance.
· Dry machining of aluminum alloy is possible.
· Melting induced adhesion is minimal due to the low friction coefficient of the DLC coating and special groove shape, also making chips less likely to clog.
· Allows also non-step boring of hole depth 5D.
[Applications]
· Capable of dry machining of aluminum alloy, and non-step machining of hole depths up to 3D.
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Straight Shank, for High Hardness Steel, 3-Flute, FHL-GDTS, Long
OSG
Enables highly accurate machining of ultra-deep holes of 10 to 20 D in hardened steel which conventionally was only possible via electric discharge machining, realizing a great reduction in total drilling time.
Days to Ship: | 17 Days or more |
---|
Carbide Solid Drill Bits - with Oil Hole, for Deep Holes, CAO-GDXL
OSG
Steplessly processes super deep holes of 15D to 30D. Gun drill and HSS drill that achieves several times higher machining efficiency and tool service life
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - Straight/End Mill Shank, TiN Coated, EX-GDR, Regular
OSG
High-versatility type capable of non-step high-speed machining of up to 4 to 5 times the diameter
Days to Ship: | Same day |
---|
Show Stock Products
HSS Solid Drill Bits - Straight/End Mill Shank, With Oil-Hole, EX-HO-GDR, Regular
OSG
Thanks to the oil hole, high-efficiency processing and long service life are achieved, making it effective for difficult-to-machine materials such as stainless steel
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - Straight/End Mill Shank, V-Coated, VP-GDR, Regular
OSG
Super Premium High + V coating enables high-speed machining similar to the carbide drill
Days to Ship: | 8 Days or more |
---|
Show Stock Products
HSS Solid Drill Bits - Straight/End Mill Shank, V-Coated with Oil-Hole, VP-HO-GDR
OSG
Powdered high-speed steel + V coating with an oil hole allow high speed machining that can exceed the power of carbide drills
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - Straight Shank, Thruster Drill Bit, TDXL, 10D Type
OSG
HSS Drill for Machining Extra-Deep Holes Up to 10 D
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - for High Hardness Steel, WH55-5D
OSG
Stable processing of die cast molds is possible. Ideal for steel materials up to 55 HRC
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Straight Shank, Cemented Carbide, Stub, DIXI1130
DIXI
•Tool Material Type: Carbide
•Link Model: Straight Link
•Torsional Angle: 24
•Tip Angle (°): 118
•Diameter Tolerance: h6
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Straight Shank, for Aluminum Machining, MAXAL, ACD
ATOM
With the tip and groove shapes specially designed for aluminum, it discharges cutting chips smoothly. The tip has been given a thinning finish, so it bites in well and suppresses hole bending.
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Straight Shank, NC Point Drill Bit, SNPDA
OKAZAKI
A point drill bit optimal for chamfering or positioning when drilling.
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Hole Diameter (Drilling Diameter) D(mm) |
Groove Length (ℓ)(mm) |
Work Material |
Tool Material Type |
Overall Length (L)(mm) |
Link Model |
Coating Presence |
Coating Type |
Oil-Hole Presence |
Brand | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | OSG | OSG | OSG | OSG | ATOM | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | GUHRING | EIKOSHA | EIKOSHA | EIKOSHA | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | MISUMI | MISUMI | MISUMI | MISUMI | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | OSG | OSG | OSG | OSG | OSG | OSG | OSG | OSG | DIXI | ATOM | OKAZAKI |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | HSS Solid Drill Bits - Straight/End Mill Shank, TiN Coated, EX-GDN, Medium | HSS Solid Drill Bits - Straight/End Mill Shank, WDI Coated, VPH-GDS, Stub | Carbide Solid Drill Bits - for High Hardness Steel, WH70-DRL | Carbide Solid Drill Bits - for High Hardness Steel, with Oil Hole, WHO55-5D | HSS Solid Drill Bits - Straight Shank, TiN Coated, N 651, Regular | Carbide Solid Drill Bits - Straight Shank, 100 mm, GT100 J691 | Carbide Solid Drill Bits - Straight Shank, 300 mm, GT100 J685 | Carbide Solid Drill Bits - Straight Shank, 300 mm, GT100 J695 | Carbide Solid Drill Bits - Straight Shank, 300 mm, GT100 J765 | HSS Solid Drill Bits - Straight Shank, TiN Coated, N 667, Long | HSS Solid Drill Bits - Taper Shank, Counterbore with Drill, DCB | Carbide Solid Drill Bits - Aqua Drill EX Bit, Flat Type, with Oil Hole, 3D, AQDEXZOH3D | Carbide Solid Drill Bits - Aqua Drill EX Bit, with Oil Hole, 10D, AQDEXOH10D | Carbide Solid Drill Bits - Aqua Drill EX Bit, Pilot Type, with Oil Hole, AQDEXOHPLT | Carbide Solid Drill Bits - Straight Shank, TiAlN Coated, Regular | HSS Solid Drill Bits - Straight Shank, for Difficult-to-Cut Materials, TiN Coated, Long | HSS Solid Drill Bits - Straight Shank, AG-ESS Drill Bit, AGESS | Carbide Solid Drill Bits - Aqua Drill EX Bit, with Oil Hole, 5D, AQDEXOH5D | HSS Solid Drill Bits - Straight Shank, Cobalt Drill Bit, COSD | HSS Solid Drill Bits - Straight Shank, TiN Coated, G Short Drill Bit, GSS | Carbide Solid Drill Bits - Aqua Drill EX Bit, AQDEXR, Regular | Carbide Solid Drill Bits - DLC Drill Bit, for Aluminum Machining, DLCDR, Regular | Carbide Solid Drill Bits - Straight Shank, for High Hardness Steel, 3-Flute, FHL-GDTS, Long | Carbide Solid Drill Bits - with Oil Hole, for Deep Holes, CAO-GDXL | HSS Solid Drill Bits - Straight/End Mill Shank, TiN Coated, EX-GDR, Regular | HSS Solid Drill Bits - Straight/End Mill Shank, With Oil-Hole, EX-HO-GDR, Regular | HSS Solid Drill Bits - Straight/End Mill Shank, V-Coated, VP-GDR, Regular | HSS Solid Drill Bits - Straight/End Mill Shank, V-Coated with Oil-Hole, VP-HO-GDR | HSS Solid Drill Bits - Straight Shank, Thruster Drill Bit, TDXL, 10D Type | Carbide Solid Drill Bits - Straight Shank, Cemented Carbide, Stub, DIXI1130 | Carbide Solid Drill Bits - Straight Shank, for Aluminum Machining, MAXAL, ACD | Carbide Solid Drill Bits - Straight Shank, NC Point Drill Bit, SNPDA | |||||||||||||
Days to Ship | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more |
Same day
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 7 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 27 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day
Show Stock Products | 8 Days or more | 8 Days or more |
Same day
Show Stock Products |
Same day or more
Show Stock Products |
8 Days or more
Show Stock Products | 8 Days or more | 17 Days or more | 8 Days or more |
Same day
Show Stock Products | 8 Days or more |
8 Days or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Hole Diameter (Drilling Diameter) D(mm) | 10 | 0.2 ~ 11.9 | 3 ~ 12 | 3 ~ 6 | 10 | 3 ~ 12 | 6 ~ 10 | 0.3 ~ 13 | 0.5 ~ 16 | 1.5 ~ 15 | 0.2 ~ 19 | 3 ~ 13 | 6 ~ 13 | 6 ~ 13 | 3 ~ 13 | 0.5 ~ 18 | 1.98 ~ 19.95 | 6 ~ 10.7 | 3.5 ~ 20 | 3 ~ 16 | 1 ~ 12 | 1.015 ~ 12.03 | 3 ~ 13 | 1 ~ 8 | 2 ~ 13 | 2 ~ 13 | 3 ~ 12 | 6 | 3 ~ 16 | 3 ~ 16 | 0.5 ~ 13 | 1.6 ~ 20 | 3 ~ 16 | 3 ~ 12 | 3 | 3 ~ 10 | 4 ~ 12 | 6 ~ 40 | 3 ~ 32 | 6 ~ 32 | 1.6×10D ~ 12×10D | 6 ~ 12 | 0.4 ~ 14 | 1 ~ 12 | 3 ~ 12 |
Groove Length (ℓ)(mm) | 60 | 3 ~ 109 | 19 ~ 73 | 25 ~ 43 | 43 | 16 ~ 76 | 48 ~ 80 | 8 ~ 70 | 3 ~ 58 | 33 ~ 147 | 2.5 ~ 135 | 50 | 250 | 250 | 180 ~ 200 | 12 ~ 158 | 2 ~ 22 | 4 ~ 8 | 10 ~ 45 | 14 ~ 72 | 13 ~ 156 | 3.3 ~ 54 | 16 ~ 78 | 12 ~ 75 | 24 ~ 101 | 56 ~ 134 | 16 ~ 51 | 57 | 16 ~ 80 | 28 ~ 128 | 5 ~ 80 | 13 ~ 94 | 19 ~ 96 | 19 ~ 73 | 15 | 55 ~ 265 | 43 ~ 101 | 57 ~ 180 | 33 ~ 165 | 57 ~ 165 | 26 ~ 155 | 48 ~ 96 | 6 ~ 37 | 15 ~ 50 | 8 ~ 30 |
Work Material | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Cast Iron[◎] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[◎] / Aluminum[○] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Cast Iron[◎] / Titanium[◎] | High-Hardness Steel[◎] | Heat-Treated Steel[◎] / High-Hardness Steel[◎] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | General Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[○] | General Steel[○] / Cast Iron[◎] / Aluminum[○] / Resin[○] | General Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○] | Cast Iron[◎] / Aluminum[◎] | Cast Iron[◎] / Aluminum[◎] | Cast Iron[◎] / Aluminum[◎] | Cast Iron[◎] / Aluminum[◎] | General Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○] / Resin[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Cast Iron[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Stainless Steel[◎] / Titanium[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[◎] / Stainless Steel[○] / Cast Iron[○] | Aluminum[◎] / Copper[○] | Heat-Treated Steel[○] / High-Hardness Steel[◎] | Aluminum[◎] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[◎] / Aluminum[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[◎] / Titanium[◎] / Copper[○] | General Steel[◎] / Cast Iron[◎] / Aluminum[◎] | Heat-Treated Steel[◎] / High-Hardness Steel[◎] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[◎] / Aluminum[○] / Copper[○] / Resin[○] | Aluminum[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] |
Tool Material Type | Carbide | High-Speed Steel | Carbide | Cobalt High-Speed Steel | Powdered High-Speed Steel | Carbide | Carbide | Carbide | Carbide | High-Speed Steel | High-Speed Steel | Carbide | Carbide | Carbide | Carbide | High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | High-Speed Steel | Carbide | Carbide | Carbide | Carbide | Carbide | Cobalt High-Speed Steel | Cobalt High-Speed Steel | High-Speed Steel | Cobalt High-Speed Steel | Carbide | Carbide | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Carbide | Carbide | Carbide | Carbide | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Cobalt High-Speed Steel | Carbide | Carbide | Carbide | Carbide |
Overall Length (L)(mm) | 110 | 19 ~ 146 | 51 ~ 130 | 57 ~ 87 | 93 | 46 ~ 120 | 92 ~ 136 | 40 ~ 149 | 20 ~ 115 | 55 ~ 202 | 19 ~ 198 | 100 | 300 | 300 | 300 | 32 ~ 241 | 65 ~ 370 | 110 ~ 125 | 48 ~ 130 | 68 ~ 146 | 61 ~ 216 | 54 ~ 122 | 46 ~ 137 | 34 ~ 117 | 49 ~ 151 | 85 ~ 205 | 48 ~ 108 | 93 | 48 ~ 144 | 78 ~ 194 | 27 ~ 152 | 39 ~ 168 | 49 ~ 160 | 51 ~ 130 | 65 | 105 ~ 315 | 75 ~ 158 | 101 ~ 270 | 65 ~ 245 | 101 ~ 245 | 70 ~ 215 | 92 ~ 156 | 30 ~ 107 | 40 ~ 100 | 50 ~ 110 |
Link Model | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link | Straight Link |
Coating Presence | Included | None | Included | Included | Included | Included | Included | None | None | Included | Included | None | None | None | None | Included | None | None | None | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | None | Included | Included | Included | Included | None | Included | Included | Included | Included | Included | Included | None | None | Included |
Coating Type | Others | Non-Coated | Others | TiN | Others | Others | Others | Non-Coated | - | Others | TiN | - | - | - | - | TiN | - | - | - | Others | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | TiAlN | TiAlN | TiN | TiN | Others | TiCN | Others | Others | Non-Coated | TiN | Others | DLC | Others | Non-Coated | TiN | TiN | Others | Others | Others | Others | - | Non-Coated | TiAlN |
Oil-Hole Presence | None | None | None | None | None | None | Included | None | None | None | None | Included | None | Included | Included | None | None | None | None | Included | Included | Included | None | None | None | None | None | None | None | Included | None | None | None | None | None | Included | None | Included | None | Included | None | None | None | None | None |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy