(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
HSS Solid Drill Bits - Straight/End Mill Shank, EX-SUS-GDS, Stub
OSG
Ideal for stainless steel, mild steel, copper alloy, etc.
Days to Ship: | Same day or more |
---|
Show Stock Products
Carbide Solid Drill Bits - Aqua Drill EX Bit, for Counter Boring, AQDEXZ
Nachi-Fujikoshi
180° flat multifunctional carbide drill.
[Features]
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· Can support a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.
Days to Ship: | Same day or more |
---|
Show Stock Products
Carbide Solid Drill Bits - Aqua Drill EX Bit, with Oil Hole, 10D, AQDEXOH10D
Nachi-Fujikoshi
[Features]
· Drill capable of wet machining and MQL machining.
· For highly-efficient hole drilling up to 10 times the drill diameter.
Days to Ship: | 8 Days or more |
---|
Carbide Step Drill Bits - Straight Shank, Chamfering Blade, TiAlN Coated
MISUMI
A stepped drill reduces the number of machining steps, allowing for higher-efficiency drilling
Days to Ship: | 8 Days or more |
---|
HSS Taper Shank Drill Bits - G Shank Drills, GTD, Standard
Nachi-Fujikoshi
Taper shank type coating drill for general purpose.
[Features]
· The surface is coated with a hard TiN film to achieve a long service life.
[Applications]
· Supports materials from steel to stainless steel and aluminum.
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Aqua Micro Drill, AQMD
Nachi-Fujikoshi
A drill that is difficult to break and stable for machining.
[Features]
· Employs cemented carbide ideal for small diameter hole drilling.
· A drill with high rigidity is used.
· The cutting load has been reduced by circumferential clearance and thinning.
[Applications]
· Hard to break and capable of stable processing thanks to the high-rigidity shape and the use of carbide alloy ideal for small diameter drilling work.
Days to Ship: | 7 Days or more |
---|
Show Stock Products
Carbide Step Drill Bits - Straight Shank, Chamfering Blade, R Type
MISUMI
The desired stepped drill can be ordered without a drawing. Delivered in a short delivery time
Days to Ship: | 15 Days or more |
---|
MISUMI
Excellent processing performance and durability that meet the cutting requirements for machining difficult-to-cut materials
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - End Mill Shank, Double Margin Drill, TiAlN Coated
MISUMI
Double margin for high accuracy and stable machining
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Straight Shank, for Precision Machining, WX-MS-GDS, Ultra Small
OSG
Achieves high precision and high performance for drilling ultra-fine diameters for precision equipment or IT components
Days to Ship: | 8 Days or more |
---|
MISUMI
Straight shank series of the popular high-speed, high-feed machining drill
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - Straight Shank, Cobalt Drill Bit, COSD
Nachi-Fujikoshi
A general-purpose cobalt drill that can handle anything from steel to stainless steel.
[Features]
· Consistent drill bite due to the X-type thinning.
· Sharpness is increased by reinforcing the drill torsion angle.
· White surface less than 2.0 mm in diameter (not colored).
[Applications]
· Can be used for a wide range of materials, from steel to stainless steel.
Days to Ship: | Same day |
---|
Show Stock Products
Carbide Step Drill Bit, With Custom Dimensions
MISUMI
[Features]
・Introducing a standard shank type with a tip diameter / large diameter custom dimensions type to a customizable step drill bits with helical flutes.
Days to Ship: | 12 Days or more |
---|
Carbide Solid Drill Bits - Micro Drill Bit, for Precision Machining, ADR
ATOM
A drill for precision multiporous machining. (Min. diameter φ0.02), Can be used for a wide range of applications including general steel, non-ferrous metals, and resins.
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Aqua Drill EX Bit, Flat Type, with Oil Hole, 3D, AQDEXZOH3D
Nachi-Fujikoshi
A 180° flat, internally-lubricated type multi-functional carbide drill.
[Features]
· Allows high efficiency flat drilling up to hole depth 3D.
· A drill with oil hole that supports stainless steel.
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· A multi-functional drill that is capable of supporting a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - Straight/End Mill Shank, EX-SUS-GDR, Regular
OSG
Regular groove length series ideal for stainless steel, mild steel, aluminum alloy, copper alloy, etc.
Days to Ship: | Same day or more |
---|
Show Stock Products
Carbide Solid Drill Bits - Micro Drill Bit, Long Flute Length, ADRL-SV
ATOM
A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
Days to Ship: | Same day or more |
---|
Show Stock Products
HSS Taper Shank Drill Bits - 130 Degree Point Angle, GV120 0363, Stub
GUHRING
This drill is ideal for stainless steel machining.
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Aqua Drill EX Bit, with Flat Radius, AQDEXZ-R
Nachi-Fujikoshi
[Features]
· Drill with excellent drilling performance for counterboring.
· Ideal for inclined surfaces and tap pilot hole drilling.
· Recommended for hole depth 2D (twice the diameter) or less.
Days to Ship: | 9 Days or more |
---|
Carbide Solid Drill Bits - End Mill Shank, TiAlN Coated, Stub with Oil Holes, Regular
MISUMI
Drill with burnishing blade for one-shot machining down to hole finishing
Days to Ship: | 8 Days or more |
---|
MISUMI
Capable of high-feed, high-speed cutting on everything from standard steel to stainless steel.
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - Straight Shank, for Difficult-to-Cut Materials, TiN Coated, Long
MISUMI
A long version of the popular drill for difficult-to-cut materials
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - Straight Shank, TiN Coated, G Short Drill Bit, GSS
Nachi-Fujikoshi
Short type straight shank drill with a TiN coated surface.
[Features]
· The original thinning shape (3-rake) improves centripedality and chip separation.
· TiN coating achieves longer life.
[Applications]
· Capable of high efficiency machining of materials ranging from steel to stainless steel and aluminum. High positional accuracy can be obtained.
Days to Ship: | Same day or more |
---|
Show Stock Products
Carbide Solid Drill Bits - Aqua Drill EX Bit, AQDEXR, Regular
Nachi-Fujikoshi
Carbide universal drill capable of stable high efficiency machining across a wide range of speeds from medium-low to high speed.
[Features]
· Shape of the new cutting edge greatly improves chip discharge performance.
· The cutting resistance is reduced to provide stable machining even on small machines.
· A special lubrication function film is provided on the surface layer of the AlCrSi coating.
· Longer life by improving lubricity and heat/abrasion resistance.
· The unique thinning shape increases biting and reduces cutting resistance.
[Applications]
· Ideal for thin work materials and small low-rigidity processing machines.
Days to Ship: | Same day or more |
---|
Show Stock Products
HSS Solid Drill Bits - Straight/End Mill Shank, TiCN Coated, SG-ESS Drill Bit, SGESS
Nachi-Fujikoshi
High-grade powdered high-speed steel and SG coating allows this HSS drill to have the longest life possible.
[Features]
· Optimized cutting edge, groove shape and high precision achieve stable processing and high hole positioning accuracy.
· Achieves high-efficiency machining based on high speed and high feed.
[Applications]
· Capable of high speed, high efficiency machining of materials ranging from steel to stainless steel and aluminum, enabling high precision drilling.
Days to Ship: | Same day or more |
---|
Show Stock Products
Carbide Solid Drill Bits - Straight Shank, Semi-Long, ADSL
ATOM
A high-quality general-purpose drill which can support a wide range of materials, from steel/non-ferrous to resin. Versatile type that allows high performance to be achieved not only in high-speed cutting but also in low-speed cutting.
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Hi-Spec Micro Drill Bit, ADR-SP
ATOM
The intermediate size of the drill diameter 0.01 mm increment size is standardized. High-spec and high-precision drill, keeping runout accuracy and lip height difference that affect hole accuracy within 2 microns.
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Micro Drill Bit, Short Flute Length, ADRS-SV
ATOM
A new series that achieves stable long life machining developed for thin hole machining on steel. A coated drill supporting a wide range of materials from mild steel to high hardness steel (HRC 50).
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Micro Drill Bit, Short Flute, for Precision Machining, ADRS
ATOM
A drill for precision multiporous machining. Supports a wide range of applications, from general steel to nonferrous metals and resins.
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Micro Drill Bit, Type N, 3899
GUHRING
Achieves high-precision and long-life small diameter hole machining by adoption of base material with high breaking resistance and specialized coating ideal for small-diameter drills. The shank diameters are unified at φ3. Lineup featuring sizes in 1/100 increments.
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Aqua Drill EX Bit, Flat Type, with Oil Hole, 5D, AQDEXZOH5D
Nachi-Fujikoshi
A 180° flat, internally-lubricated type multi-functional carbide drill.
[Features]
· Allows high efficiency flat drilling up to hole depth 5D.
· A centering hole or guide hole is required.
· Reduces hole expansion thanks to its double margins and 2-step cutting edge tip shape.
· Capable of producing an accurate counter-bore surface with one shot.
· Aqua EX coating improves heat and wear resistance, providing long life.
[Applications]
· A multi-functional drill that is capable of supporting a wide range of applications such as countersinking on inclined surfaces, correction of eccentric bores, burr-free machining of thin plates, etc.
Days to Ship: | 8 Days or more |
---|
HSS Solid Drill Bits - Straight Shank, Gekkou Cobalt Drill Bit
BIGTOOL
•Tool Material Type: Cobalt High-Speed Steel
•Link Model: Straight Link
•Coating Type: Non-Coated
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Aqua Drill EX Bit, Pilot Type, with Oil Hole, AQDEXOHPLT
Nachi-Fujikoshi
[Features]
· Drill for drilling guide holes.
· High bite performance guide hole improves centering during deep hole drilling, giving improved drilling performance.
Days to Ship: | 8 Days or more |
---|
KYOCERA
[Features]
· Long life and stable machining with a diverse range of work material
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - End Mill Shank, TS Coated
MISUMI
Highly durable composite helix drill for raw materials
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - End Mill Shank, 3 Flute Drill, TiAlN Coated, Stub, Regular
MISUMI
High-concentricity 3-flute drill* In case of poor chip flow, perform step processing according to chip flow
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - End Mill Shank, Corrugated Cutting Edge, TiAlN Coated, Stub
MISUMI
Offering a full assortment of standard drills effective for iron-based materials in 0.1mm increments at ultra-low cost
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - End Mill Shank, Corrugated Cutting Edge, TiAlN Coated, Regular
MISUMI
Performing three rake + R thinning results in high concentricity.
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - End Mill Shank, with Corner Radius, TiAlN Coated, Stub, Regular
MISUMI
Corner radius drill suppresses chipping and improves surface roughness
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - Straight Shank, with Corner Radius, TiAlN Coated, Stub, Regular
MISUMI
Straight shank type drill with corner radius
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - End Mill Shank, High-Speed/High-Feed Machining Drill, TiAlN Coated, Stub
MISUMI
Drill for high-speed, high-feed machining with diameter-plus tolerance
Days to Ship: | 8 Days or more |
---|
MISUMI
High-speed, high-feed drill with oil holes to further improve efficiency
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - End Mill Shank, Small-Diameter, TiAlN Coated
MISUMI
Ideal for high-precision small diameter drilling.
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - End Mill Shank, TiAlN Coated, Stub
MISUMI
Introducing a carbide drill with high versatility an astonishing low price
Days to Ship: | 8 Days or more |
---|
Carbide Solid Drill Bits - End Mill Shank, TiAlN Coated, Regular
MISUMI
Introducing a carbide drill with high versatility an astonishing low price
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Hole Diameter (Drilling Diameter) D(mm) |
Groove Length (ℓ)(mm) |
Work Material |
Tool Material Type |
Overall Length (L)(mm) |
Link Model |
Coating Presence |
Coating Type |
Oil-Hole Presence |
| |||||||||||||||||||||||||||||||||||||||||||||
Brand | OSG | Nachi-Fujikoshi | Nachi-Fujikoshi | MISUMI | Nachi-Fujikoshi | Nachi-Fujikoshi | MISUMI | MISUMI | MISUMI | OSG | MISUMI | Nachi-Fujikoshi | MISUMI | ATOM | Nachi-Fujikoshi | OSG | ATOM | GUHRING | Nachi-Fujikoshi | MISUMI | MISUMI | MISUMI | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | ATOM | ATOM | ATOM | ATOM | GUHRING | Nachi-Fujikoshi | BIGTOOL | Nachi-Fujikoshi | KYOCERA | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
Product Series | HSS Solid Drill Bits - Straight/End Mill Shank, EX-SUS-GDS, Stub | Carbide Solid Drill Bits - Aqua Drill EX Bit, for Counter Boring, AQDEXZ | Carbide Solid Drill Bits - Aqua Drill EX Bit, with Oil Hole, 10D, AQDEXOH10D | Carbide Step Drill Bits - Straight Shank, Chamfering Blade, TiAlN Coated | Carbide Step Drill Bits - Straight Shank, Chamfering Blade, R Type | Carbide Solid Drill Bits - End Mill Shank, Double Margin Drill, TiAlN Coated | Carbide Solid Drill Bits - Straight Shank, for Precision Machining, WX-MS-GDS, Ultra Small | HSS Solid Drill Bits - Straight Shank, Cobalt Drill Bit, COSD | Carbide Solid Drill Bits - Micro Drill Bit, for Precision Machining, ADR | Carbide Solid Drill Bits - Aqua Drill EX Bit, Flat Type, with Oil Hole, 3D, AQDEXZOH3D | HSS Solid Drill Bits - Straight/End Mill Shank, EX-SUS-GDR, Regular | Carbide Solid Drill Bits - Micro Drill Bit, Long Flute Length, ADRL-SV | HSS Taper Shank Drill Bits - 130 Degree Point Angle, GV120 0363, Stub | Carbide Solid Drill Bits - Aqua Drill EX Bit, with Flat Radius, AQDEXZ-R | Carbide Solid Drill Bits - End Mill Shank, TiAlN Coated, Stub with Oil Holes, Regular | HSS Solid Drill Bits - Straight Shank, for Difficult-to-Cut Materials, TiN Coated, Long | HSS Solid Drill Bits - Straight Shank, TiN Coated, G Short Drill Bit, GSS | Carbide Solid Drill Bits - Aqua Drill EX Bit, AQDEXR, Regular | HSS Solid Drill Bits - Straight/End Mill Shank, TiCN Coated, SG-ESS Drill Bit, SGESS | Carbide Solid Drill Bits - Micro Drill Bit, Short Flute Length, ADRS-SV | Carbide Solid Drill Bits - Micro Drill Bit, Short Flute, for Precision Machining, ADRS | Carbide Solid Drill Bits - Aqua Drill EX Bit, Flat Type, with Oil Hole, 5D, AQDEXZOH5D | HSS Solid Drill Bits - Straight Shank, Gekkou Cobalt Drill Bit | Carbide Solid Drill Bits - Aqua Drill EX Bit, Pilot Type, with Oil Hole, AQDEXOHPLT | Carbide Solid Drill Bits - End Mill Shank, 3 Flute Drill, TiAlN Coated, Stub, Regular | Carbide Solid Drill Bits - End Mill Shank, Corrugated Cutting Edge, TiAlN Coated, Stub | Carbide Solid Drill Bits - End Mill Shank, Corrugated Cutting Edge, TiAlN Coated, Regular | Carbide Solid Drill Bits - End Mill Shank, with Corner Radius, TiAlN Coated, Stub, Regular | Carbide Solid Drill Bits - Straight Shank, with Corner Radius, TiAlN Coated, Stub, Regular | Carbide Solid Drill Bits - End Mill Shank, High-Speed/High-Feed Machining Drill, TiAlN Coated, Stub | Carbide Solid Drill Bits - End Mill Shank, Small-Diameter, TiAlN Coated | Carbide Solid Drill Bits - End Mill Shank, TiAlN Coated, Stub | Carbide Solid Drill Bits - End Mill Shank, TiAlN Coated, Regular | ||||||||||||
Days to Ship |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more |
7 Days or more
Show Stock Products | 15 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day
Show Stock Products | 12 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Hole Diameter (Drilling Diameter) D(mm) | 0.5 ~ 32 | 0.5 ~ 20 | 1 ~ 12 | 3.4 ~ 10.3 | 7 ~ 32 | 0.2 ~ 1.99 | - | 2 ~ 13 | 1 ~ 11 | 0.2 ~ 5 | 3 ~ 13 | 0.5 ~ 13 | - | 0.02 ~ 3 | 3 ~ 16 | 2 ~ 32 | 0.03 ~ 3 | 8.1 ~ 43 | 3 ~ 12 | 3 ~ 13 | 3 ~ 13 | 2 ~ 13 | 1.6 ~ 20 | 2.1 ~ 16 | 0.57 ~ 20 | 0.3 ~ 13 | 0.035 ~ 1.995 | 0.1 ~ 2.99 | 0.1 ~ 3 | 0.1 ~ 3 | 3 ~ 16 | 3 ~ 10 | 1.015 ~ 12.03 | 24.5 | 3 ~ 12 | 2 ~ 13 | 3 ~ 13 | 3 ~ 13 | 8.5 | 3 ~ 13 | 3 ~ 8 | 3 ~ 7 | 0.38 ~ 2.7 | 0.3 ~ 6 | 0.3 ~ 13 |
Groove Length (ℓ)(mm) | 3 ~ 90 | 1.65 ~ 90 | 13 ~ 156 | 21 ~ 72 | 67 ~ 177 | 2.5 ~ 15 | - | 24 ~ 101 | 12 ~ 71 | 1.5 ~ 26 | 16 ~ 78 | 5 ~ 80 | - | 0.2 ~ 25 | 2 ~ 72 | 24 ~ 165 | 0.6 ~ 40 | 49 ~ 136 | 14 ~ 54 | 20 ~ 71 | 28 ~ 77 | 56 ~ 134 | 13 ~ 94 | 17 ~ 96 | 3 ~ 94 | 8 ~ 70 | 0.4 ~ 22 | 0.6 ~ 12 | 0.6 ~ 12 | 1.2 ~ 12 | 20 ~ 104 | 42 ~ 95 | 3.3 ~ 54 | - | 20 ~ 55 | 12 ~ 77 | 20 ~ 60 | 28 ~ 77 | 47 | 16 ~ 77 | 20 ~ 41 | 24 ~ 53 | 6 ~ 12 | 2 ~ 28 | 3 ~ 77 |
Work Material | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[◎] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] | Stainless Steel[○] |
Tool Material Type | High-Vanadium High-Speed Steel | Carbide | Carbide | Carbide | High-Speed Steel | Carbide | Carbide | Cobalt High-Speed Steel | Carbide | Carbide | Carbide | Cobalt High-Speed Steel | Carbide | Carbide | Carbide | High-Vanadium High-Speed Steel | Carbide | Cobalt High-Speed Steel | Carbide | Carbide | Carbide | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Carbide | High-Speed Steel | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Cobalt High-Speed Steel | Carbide | - | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide | Carbide |
Overall Length (L)(mm) | 38 ~ 170 | 47 ~ 145 | 61 ~ 216 | 73 ~ 136 | 148 ~ 298 | 38 ~ 47 | - | 49 ~ 151 | 45 ~ 118 | 38 ~ 64 | 46 ~ 137 | 27 ~ 152 | - | 38 ~ 50 | 68 ~ 146 | 56 ~ 245 | 38 ~ 65 | 130 ~ 323 | 50 ~ 90 | 62 ~ 124 | 66 ~ 124 | 85 ~ 205 | 39 ~ 168 | 49 ~ 160 | 38 ~ 168 | 40 ~ 149 | 38 ~ 50 | 38 | 38 | 38 | 74 ~ 178 | 71 ~ 130 | 54 ~ 122 | - | 50 ~ 115 | 46 ~ 124 | 66 ~ 107 | 66 ~ 124 | 89 | 49 ~ 124 | 62 ~ 79 | 66 ~ 91 | 38 | 38 ~ 66 | 38 ~ 124 |
Link Model | End Mill Link / Straight Link | End Mill Link / Straight Link | Straight Link | Straight Link | - | End Mill Link | Straight Link | Straight Link | End Mill Link | End Mill Link / Straight Link | Straight Link | Straight Link | End Mill Link | End Mill Link | End Mill Link / Straight Link | End Mill Link / Straight Link | End Mill Link | Tapered Link | Straight Link | End Mill Link | End Mill Link | Straight Link | Straight Link | End Mill Link / Straight Link | End Mill Link / Straight Link | Straight Link | End Mill Link | End Mill Link | End Mill Link | - | End Mill Link / Straight Link | Straight Link | Straight Link | - | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | Straight Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link | End Mill Link |
Coating Presence | Included | Included | Included | Included | Included | Included | None | Included | Included | Included | Included | None | None | None | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | None | None | Included | None | Included | Included | None | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included |
Coating Type | TiN | Others | For General Steel (AlCrN etc.) | TiAlN | TiN | Others | - | TiN | TiAlN | Others | TiAlN | Non-Coated | - | Non-Coated | Others | TiN | For General Steel (AlCrN etc.) | Others | For General Steel (AlCrN etc.) | TiAlN | TiAlN | TiN | TiN | Others | TiCN | Non-Coated | Non-Coated | For General Steel (AlCrN etc.) | Non-Coated | TiAlN | Others | Non-Coated | For General Steel (AlCrN etc.) | - | - | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN | TiAlN |
Oil-Hole Presence | None | None | Included | None | - | None | None | None | None | None | None | None | None | None | Included | None | None | None | None | Included / None | None | None | None | None | None | None | None | None | None | None | Included | None | Included | - | None | None | None | None | None | None | None | Included | None | None | None |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy