(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Threading Holders(Link Size:16-sided)

The threading holder is a throwaway holder used for threading in turning. There are two types of threading holders, one for the inner diameter and the other for the outer diameter. The turning holder is mainly a square shank, and the boring holder is mainly a round shank. The square shank or round shank size is selected according to the processing machine used. Depending on the holder, there are right hand only, left hand only, and no hands (for both), so select according to the machining direction. Threaded holders can be processed with various specifications such as metric threads, unified screws, etc. and various screw pitches by exchanging the tips, but confirm and select the corresponding tip and holder specifications because there are minimum inner diameters.
Days to Ship
  • All
  • 6 Days or Less
  • 8 Days or Less
  • 9 Days or Less
  • 10 Days or Less
  • 11 Days or Less
  • 12 Days or Less
  • 13 Days or Less
  • 29 Days or Less
  1. 1
Brand
Product Series
Days to Ship
Use
Thread Model
Pitch(mm)
Minimum Processing Diameter(mm)
Preferred Hand
Link Size
Cutting Oil Hole Presence
Wiper Blade Presence

    SEC-Threading Bit, Nejikiri-Kun, STE Type

    Brand

    SUMITOMO ELEC

    Product Series

    SEC-Threading Bit, Nejikiri-Kun, STE Type

    Days to Ship 8 Days or more
    UseOuter Diameter Thread
    Thread Model60 Degrees Meter (M) / 60° Unified (UN, UNC, UNF, UNEF) / 55° Wit (W) / Taper for 55° Pipe Rc(PT) (BSPT)
    Pitch(mm)1.00~3.00
    Minimum Processing Diameter(mm)-
    Preferred HandRight Handed
    Link Size16-sided
    Cutting Oil Hole Presence-
    Wiper Blade PresenceBoth Available and Unavailable

    Loading...

    1. 1

    Related Categories to Threading Holders