(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Threading Holders（Thread Model：55° Wit (W)）
The threading holder is a throwaway holder used for threading in turning. There are two types of threading holders, one for the inner diameter and the other for the outer diameter. The turning holder is mainly a square shank, and the boring holder is mainly a round shank. The square shank or round shank size is selected according to the processing machine used. Depending on the holder, there are right hand only, left hand only, and no hands (for both), so select according to the machining direction. Threaded holders can be processed with various specifications such as metric threads, unified screws, etc. and various screw pitches by exchanging the tips, but confirm and select the corresponding tip and holder specifications because there are minimum inner diameters.
| Days to Ship |
|
|---|
-
SUMITOMO ELEC
For compact lathes with shank □20 mm square or less. It also supports space-saving threading with a 2-corner insert used vertically.
- Volume Discount
Days to Ship: 8 Days or more -
SEC-Threading Bit, Nejikiri-Kun, STE Type
SUMITOMO ELEC
Lineup of strong clamp lever lock holder (shank □25-32 mm square) and screw-on specifications (shank □12-16 mm square)
- Volume Discount
Days to Ship: 8 Days or more -
Days to Ship: 8 Days or more -
SEC-Threading Bit (Mini Bit), THE Type
SUMITOMO ELEC
It uses a G-class vertical use 3-corner insert with high cutting performance.
For outer diameter thread cutting.- Volume Discount
Days to Ship: 8 Days or more -
SEC-Threading Bit for Outer Diameter, THE Type
SUMITOMO ELEC
Firm Retractable Pin Specification
- Volume Discount
Days to Ship: 10 Days or more -
Days to Ship: 6 Days or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Use |
| Thread Model |
| Pitch(mm) |
| Minimum Processing Diameter(mm) |
| Preferred Hand |
| Link Size |
| Cutting Oil Hole Presence |
| Wiper Blade Presence |
|
|
|
|
|
| |
| Brand | SUMITOMO ELEC | SUMITOMO ELEC | SUMITOMO ELEC | SUMITOMO ELEC | SUMITOMO ELEC | SANDVIK |
| Product Series | ||||||
| Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 6 Days or more |
| Use | Outer Diameter Thread | Outer Diameter Thread | Inner Diameter Thread | Outer Diameter Thread | Outer Diameter Thread | Inner Diameter Thread |
| Thread Model | 55° Wit (W) | 55° Wit (W) | 55° Wit (W) | 55° Wit (W) | 55° Wit (W) | 55° Wit (W) |
| Pitch(mm) | 0.20～1.50 | 1.00～3.00 | 1.00～3.00 | 0.80～3.00 | 0.80～3.00 | 0.5-2.0 |
| Minimum Processing Diameter(mm) | - | - | 25 | - | - | 12 ～ 16 |
| Preferred Hand | Right Handed | Right Handed | Right Handed | Right Handed | Right Handed | Right Handed |
| Link Size | 20-sided | 16-sided | Ø20 | 12-sided | 20-sided | Ø16 |
| Cutting Oil Hole Presence | - | - | - | - | - | Included |
| Wiper Blade Presence | None | Both Available and Unavailable | Both Available and Unavailable | Both Available and Unavailable | Both Available and Unavailable | None |
Loading...
Configure
Specification/Dimensions
-
Use
- Outer Diameter Thread
- Inner Diameter Thread
-
Thread Model
-
Metric / Inch
- metric
-
Pitch(mm)
-
Minimum Processing Diameter(mm)
-
Preferred Hand
- Right Handed
- Left Handed
-
Link Size
- 12-sided
- 16-sided
- 20-sided
- Ø16
- Ø20
-
Cutting Oil Hole Presence
-
Wiper Blade Presence
Narrow search by specifying Manufacturer
-
- SUMITOMO ELEC (5)
- SANDVIK (1)
- KYOCERA (0)
- SANWASEISAKUSYO (0)
- OSG (0)
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy