(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Kyocera Turning Insert CA530 CVD Coating CCMT
KYOCERA
•Breaker Application : Finish
For complete product overview and details on Kyocera Turning Insert CA530 CVD Coating, see the sections below:
Days to Ship: | 9 Days or more |
---|
Outer Diameter Grooving Tip GBA32/GBA43
KYOCERA
•Shape : Others
•Use : Grooving / Parting
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, High-Hardness Material, Non-Ferrous Metal, Stainless Steel, Steel
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Outer Diameter Grooving Tip GBA32/GBA43, see the sections below:
Days to Ship: | 7 Days or more |
---|
60° Triangle Positive with Hole TPMT "Medium Finishing"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Positive with Hole TPMT Medium Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
Outer Diameter Grooving Chip GBA32 / GBA43 Full R Groove
KYOCERA
•Shape : Others
•Use : Grooving / Parting
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, High-Hardness Material, Non-Ferrous Metal, Stainless Steel, Steel
•Preferred Hand : Left, Right
•Nose R : Others
For complete product overview and details on Outer Diameter Grooving Chip GBA32 / GBA43 Full R Groove, see the sections below:
Days to Ship: | 8 Days or more |
---|
KYOCERA
•Shape : Others
•Use : Grooving / Parting
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Preferred Hand : Left, Right
For complete product overview and details on End Face Grooving Tip GVF, see the sections below:
Days to Ship: | 6 Days or more |
---|
Lathe Turning (1-Corner Specification) Diamond
KYOCERA
•Shape : Others
•Use : Grooving / Parting
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Rake Angle : Positive
•Preferred Hand : Left, No Preferred Hand, Right
•Nose R : 0.2, Others
For complete product overview and details on Lathe Turning (1-Corner Specification) Diamond, see the sections below:
Days to Ship: | 8 Days or more |
---|
KYOCERA
•Shape : V (35° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 35°, Negative, with Hole, VNMG○○MQ, for Finishing to Intermediate Cutting for Stainless Steel / Heat Resistant Alloy, see the sections below:
Days to Ship: | 8 Days or more |
---|
Kyocera Insert for Grooving PV7040 COAT
KYOCERA
For complete product overview and details on Kyocera Insert for Grooving PV7040 COAT, see the sections below:
Days to Ship: | 9 Days or more |
---|
DAISHOWASEIKI
•Shape : Others, T (Triangular)
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, High-Hardness Material, Non-Ferrous Metal, Stainless Steel, Steel
•Nose R : 0.2, 0.4, 0.8, Others
For complete product overview and details on Throwaway Tip (TC11), see the sections below:
Days to Ship: | 6 Days or more |
---|
KYOCERA
•Shape : Others
•Use : Other
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Preferred Hand : No Preferred Hand
•Nose R : Others
For complete product overview and details on For Atobiki (Small Tool), see the sections below:
Days to Ship: | 8 Days or more |
---|
KYOCERA
•Shape : D (55° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : Left, No Preferred Hand, Right
For complete product overview and details on Turning Insert Diamond 55°, Positive, with Hole, DCGT for Finishing to Intermediate Cutting Aluminum, Nonferrous Metals, see the sections below:
Days to Ship: | 8 Days or more |
---|
Diamond Shape 35° / Positive CBN Diamond VBGW
KYOCERA
[Specifications]
· Shape: V (35° Diamond)
· Rake Angle: Positive
· Handedness: No Handedness
[Applications]
· Machining Applications: For O.D., I.D.
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PS "for Intermediate to Rough Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PS for Intermediate to Rough Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 55°, Negative, with Hole, DNMG11○○GS "for Intermediate to Rough Cutting"
KYOCERA
[Specifications]
· Shape: D (55° Diamond)
· Number of Usable Corners: 4
· Rake Angle: Negative
· Handedness: No Handedness
[Applications]
· Machining Applications: For O.D., I.D.
· Breaker Applications: Intermediate to Heavy Cutting
Days to Ship: | 8 Days or more |
---|
Tip for Lathe, CBN Diamond, Positive TPGB
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
•Nose R : 0.2, 0.4, 0.8, Others
For complete product overview and details on Tip for Lathe, CBN Diamond, Positive TPGB, see the sections below:
Days to Ship: | 8 Days or more |
---|
Kyocera Turning Insert PV720 PVD Cermet VBMT/VCMT
KYOCERA
•Breaker Application : Finish
For complete product overview and details on Kyocera Turning Insert PV720 PVD Cermet, see the sections below:
Days to Ship: | 9 Days or more |
---|
Inner Diameter Thread Cutting Tip
KYOCERA
•Shape : T (Triangular)
•Use : Tapping
•Work Material : Cast Iron, Non-Ferrous Metal, Stainless Steel, Steel
•Rake Angle : Positive
•Preferred Hand : Right
•Nose R : 0.2, Others
For complete product overview and details on Inner Diameter Thread Cutting Tip, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PQ "for Finishing to Intermediate Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PQ for Finishing to Intermediate Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○MS, for Intermediate to Rough Cutting for Stainless Steel / Heat Resistant Alloy, see the sections below:
Days to Ship: | 8 Days or more |
---|
Square 90°, Negative, with Hole SNMG12○○-MS "Semi to Rough", Stainless Steel / Heat-Resistant Alloys
KYOCERA
•Shape : S (Square)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Square 90°, Negative, with Hole SNMG12○○-MS Semi to Rough, Stainless Steel / Heat-Resistant Alloys, see the sections below:
Days to Ship: | 8 Days or more |
---|
80° Hexagon Type Negative with Hole WNMG○○MS "Medium to Rough" Stainless Steel Heat-Resistant Alloy
KYOCERA
•Shape : W (Hexagonal)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 80° Hexagon Type Negative with Hole WNMG○○MS Medium to Rough Stainless Steel Heat-Resistant Alloy, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Positive, with Hole, CCMT○○HQ "for Finishing to Intermediate Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CCMT○○HQ for Finishing to Intermediate Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Positive with Hole TBGT "Finishing"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on 60° Triangle Positive with Hole TBGT Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
Diamond Shape 35° / Positive with Hole VBGT
KYOCERA
•Shape : V (35° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish, Medium Cutting
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, 0.8, Others
For complete product overview and details on Diamond Shape 35° / Positive with Hole VBGT, see the sections below:
Days to Ship: | 8 Days or more |
---|
80° Hexagon Type Positive with Hole WBGT "Finishing"
KYOCERA
•Shape : W (Hexagonal)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on 80° Hexagon Type Positive with Hole WBGT Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
For Deep Grooving (1 Corner Type) CBN
KYOCERA
•Shape : Others
•Use : Grooving / Parting
•Work Material : High-Hardness Material
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on For Deep Grooving (1 Corner Type) CBN, see the sections below:
Days to Ship: | 8 Days or more |
---|
Outer Diameter Threading Tool Holder KTT Type, Compatible Chip
KYOCERA
•Shape : T (Triangular)
•Use : Tapping
•Work Material : Cast Iron, Non-Ferrous Metal, Stainless Steel, Steel
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Outer Diameter Threading Tool Holder KTT Type, Compatible Chip, see the sections below:
Days to Ship: | 8 Days or more |
---|
Planet Cutter Series Chip for High Pro Planet Cutter Series PC-CTI
OSG
•Shape : Others
•Use : Tapping
•Work Material : Non-Ferrous Metal, Steel
For complete product overview and details on Planet Cutter Series Chip for High Pro Planet Cutter Series PC-CTI, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PP "for Finishing"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PP for Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Negative with Hole TNGG16○○-S "Finishing"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, 0.8, Others
For complete product overview and details on 60° Triangle Negative with Hole TNGG16○○-S Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Negative with Hole TNGG16○○-B "Finishing to Medium"
KYOCERA
•No. of Usable Corners : 6~6
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on 60° Triangle Negative with Hole TNGG16○○-B Finishing to Medium, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Negative with Hole TNMG1604○○-C "Medium to Rough"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on 60° Triangle Negative with Hole TNMG1604○○-C Medium to Rough, see the sections below:
Days to Ship: | 8 Days or more |
---|
80° Hexagon Type Negative with Hole WNMG○○GS "Medium to Rough"
KYOCERA
[Specifications]
· Shape: W (Hexagon)
· Number of Usable Corners: 6
· Rake Angle: Negative
· Handedness: No Handedness
[Applications]
· Machining Applications: For O.D., I.D.
· Breaker Applications: Intermediate to Heavy Cutting
Days to Ship: | 8 Days or more |
---|
80° Hexagon Type Negative with Hole WNMG "Rough Cutting"
KYOCERA
•Shape : W (Hexagonal)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 80° Hexagon Type Negative with Hole WNMG Rough Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
80° Hexagon Type Negative with Hole WNMG "Medium to Rough" Aluminum Non Ferrous
KYOCERA
•Shape : W (Hexagonal)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 80° Hexagon Type Negative with Hole WNMG Medium to Rough Aluminum Non Ferrous, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Finishing"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CCGT for Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 55°, Positive, with Hole, DCMT "for Finishing to Intermediate Cutting"
KYOCERA
•Shape : D (55° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 55°, Positive, with Hole, DCMT for Finishing to Intermediate Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
Diamond Shape 35° / Positive with Hole VPGT
KYOCERA
•Shape : V (35° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : No Preferred Hand
•Nose R : 0.2, Others
For complete product overview and details on Diamond Shape 35° / Positive with Hole VPGT, see the sections below:
Days to Ship: | 8 Days or more |
---|
Inner Diameter Thread Cutting Tip 11IR/L○○ISO
KYOCERA
•Shape : T (Triangular)
•Use : Tapping
•Work Material : Cast Iron, Non-Ferrous Metal, Stainless Steel, Steel
•Rake Angle : Positive
•Preferred Hand : Right
•Nose R : Others
For complete product overview and details on Inner Diameter Thread Cutting Tip 11IR/L○○ISO, see the sections below:
Days to Ship: | 8 Days or more |
---|
Outer Diameter Thread Cutting Tip 22ER/L○○60
KYOCERA
•Shape : T (Triangular)
•Use : Tapping
•Work Material : Cast Iron, Non-Ferrous Metal, Stainless Steel, Steel
•Rake Angle : Positive
•Preferred Hand : Right
•Nose R : Others
For complete product overview and details on Outer Diameter Thread Cutting Tip 22ER/L○○60, see the sections below:
Days to Ship: | 8 Days or more |
---|
Sandvik CoroTurn 107 Lathe Positive Tip 1105 VCEX110301
SANDVIK
[Features]
· Coated carbide tip for machining outer diameter of small objects and parts
· Handed Tip
· Diamond Shape 35° Tip
· Positive tips
[Applications]
· For general industrial applications and heat-resistant alloy machining
· For Finish Machining
Days to Ship: | 16 Days or more |
---|
Kyocera Turning Insert PR1225 PVD Coating DCGT
KYOCERA
•Breaker Application : Finish
For complete product overview and details on Kyocera Turning Insert PR1225 PVD Coating, see the sections below:
Days to Ship: | 9 Days or more |
---|
Kyocera Turning Insert PR1225 PVD Coating DCGT/DCMT
KYOCERA
•Breaker Application : Finish
For complete product overview and details on Kyocera Turning Insert PR1225 PVD Coating, see the sections below:
Days to Ship: | 9 Days or more |
---|
Kyocera Cutting Insert PR1535 PVD Coating
KYOCERA
For complete product overview and details on Kyocera Cutting Insert PR1535 PVD Coating, see the sections below:
Days to Ship: | 9 Days or more |
---|
Sandvik T-Max P Lathe Negative Tip 2035 DNMG
SANDVIK
[Features]
· Coated carbide tip.
· Diamond Shape 55° Tip
· Negative Insert
[Applications]
· For Stainless Steel Machining
Days to Ship: | 5 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Shape |
Use |
No. of Usable Corners |
Work Material |
Breaker Application |
Rake Angle |
Preferred Hand |
Nose R |
Outer Diameter / Inner Diameter (For Tapping) |
Groove Width (For Grooving / Parting) |
Thread Type (For Tapping) |
No. of Teeth (For Tapping) |
Pitch (For Tapping) |
Brand | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | DAISHOWASEIKI | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | OSG | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | SANDVIK | KYOCERA | KYOCERA | KYOCERA | SANDVIK |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PS "for Intermediate to Rough Cutting" | Turning Insert Diamond 55°, Negative, with Hole, DNMG11○○GS "for Intermediate to Rough Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PQ "for Finishing to Intermediate Cutting" | Square 90°, Negative, with Hole SNMG12○○-MS "Semi to Rough", Stainless Steel / Heat-Resistant Alloys | 80° Hexagon Type Negative with Hole WNMG○○MS "Medium to Rough" Stainless Steel Heat-Resistant Alloy | Turning Insert Diamond 80°, Positive, with Hole, CCMT○○HQ "for Finishing to Intermediate Cutting" | Outer Diameter Threading Tool Holder KTT Type, Compatible Chip | Planet Cutter Series Chip for High Pro Planet Cutter Series PC-CTI | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PP "for Finishing" | 60° Triangle Negative with Hole TNGG16○○-B "Finishing to Medium" | 60° Triangle Negative with Hole TNMG1604○○-C "Medium to Rough" | 80° Hexagon Type Negative with Hole WNMG○○GS "Medium to Rough" | 80° Hexagon Type Negative with Hole WNMG "Medium to Rough" Aluminum Non Ferrous | Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Finishing" | Turning Insert Diamond 55°, Positive, with Hole, DCMT "for Finishing to Intermediate Cutting" | ||||||||||||||||||||||||||||||
Days to Ship | 9 Days or more | 7 Days or more | 8 Days or more | 8 Days or more | 6 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 6 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 16 Days or more | 9 Days or more | 9 Days or more | 9 Days or more | 5 Days or more |
Shape | - | Others | T (Triangular) | Others | Others | Others | V (35° Diamond) | - | T (Triangular) | Others | D (55° Diamond) | V (35° Diamond) | C (80° Diamond) | D (55° Diamond) | T (Triangular) | - | T (Triangular) | C (80° Diamond) | C (80° Diamond) | S (Square) | W (Hexagonal) | C (80° Diamond) | T (Triangular) | V (35° Diamond) | W (Hexagonal) | Others | T (Triangular) | Others | C (80° Diamond) | T (Triangular) | T (Triangular) | T (Triangular) | W (Hexagonal) | W (Hexagonal) | W (Hexagonal) | C (80° Diamond) | D (55° Diamond) | V (35° Diamond) | T (Triangular) | T (Triangular) | - | - | - | - | - |
Use | - | Grooving / Parting / Tapping | Outer Diameter / Inner Diameter | Grooving / Parting | Grooving / Parting | Grooving / Parting | Outer Diameter / Inner Diameter | - | - | Other | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | - | Tapping | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Grooving / Parting | Tapping | Tapping | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Tapping | Tapping | - | - | - | - | - |
No. of Usable Corners | - | - | 3 | - | - | 1 | 4 | - | - | - | 2 | 1 / 2 | 4 | 4 | 1 | - | 3 | 4 | 4 | 8 | 6 | 2 | 3 | 2 | 3 | 1 | - | - | 4 | 6 | 6 | 6 | 6 | 6 | 6 | 2 | 2 | 2 | 3 | 3 | - | - | - | - | - |
Work Material | - | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy / High-Hardness Material | Steel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy / High-Hardness Material | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | - | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy / High-Hardness Material | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Cast Iron / High-Hardness Material | Steel / Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron | Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | - | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | Steel | Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | High-Hardness Material | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | Steel / Non-Ferrous Metal | Steel / Stainless Steel | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium Alloy | Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | - | - | - | - | - |
Breaker Application | Finish | - | Medium Cutting | - | - | - | Medium Cutting | - | - | - | Medium Cutting | - | Medium - Heavy Cutting | Medium - Heavy Cutting | - | Finish | - | Medium Cutting | Medium - Heavy Cutting | Medium - Heavy Cutting | Medium - Heavy Cutting | Medium Cutting | Finish | Finish / Medium Cutting | Finish | - | - | - | Finish | Finish | Medium Cutting | Heavy Cutting | Medium - Heavy Cutting | Medium Cutting | Medium - Heavy Cutting | Finish | Medium Cutting | Finish | - | - | - | Finish | Finish | - | - |
Rake Angle | - | - | Positive | - | - | Positive | Negative | - | - | - | Positive | Positive | Negative | Negative | Positive | - | Positive | Negative | Negative | Negative | Negative | Positive | Positive | Positive | Positive | Positive | - | - | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Positive | Positive | Positive | Positive | Positive | - | - | - | - | - |
Preferred Hand | - | Right / Left | No Preferred Hand | Right / Left | Right / Left | Right / Left / No Preferred Hand | No Preferred Hand | - | - | No Preferred Hand | Right / Left / No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | - | Right | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | Right / Left | Right / Left | Right / Left | No Preferred Hand | Right / Left | - | No Preferred Hand | Right / Left | Right / Left | Right / Left | No Preferred Hand | No Preferred Hand | No Preferred Hand | Right / Left | No Preferred Hand | No Preferred Hand | Right | Right | Left | - | - | - | No Preferred Hand |
Nose R | - | 0.2 ~ Others | 0.2 ~ 0.8 | Others | 0.2 ~ 0.4 | 0.2 ~ Others | 0.4 ~ 0.8 | - | 0.2 ~ Others | Others | 0.2 ~ 0.8 | 0.2 ~ 0.8 | 0.4 ~ 1.6 | 0.4 ~ 0.8 | 0.2 ~ Others | - | 0.2 ~ Others | 0.4 ~ 1.2 | 0.4 ~ 1.6 | 0.4 ~ 1.6 | 0.4 ~ 1.2 | 0.2 ~ 0.8 | 0.2 ~ Others | 0.2 ~ Others | 0.2 ~ Others | 0.2 ~ 0.4 | 0.2 ~ Others | - | 0.2 ~ 1.2 | 0.2 ~ 0.8 | 0.2 ~ 0.8 | 0.4 ~ 0.8 | 0.4 ~ 1.2 | 0.4 ~ 1.2 | 0.4 | 0.2 ~ Others | 0.2 ~ 0.8 | 0.2 ~ Others | Others | Others | - | - | - | - | - |
Outer Diameter / Inner Diameter (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Minor Diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Minor Diameter | Major Diameter | - | - | - | - | - |
Groove Width (For Grooving / Parting) | - | 0.5 ~ 4.8 | - | 1 ~ 4 | 2 ~ 6 | 3 ~ 6 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Thread Type (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Unified 60° / General-purpose 60° / Wit 55° / General-purpose 55° / Pipe Taper 55° / American Pipe 60° / Trapezoidal 30° | - | - | - | - | - | - | - | - | - | - | ISO Meter 60° / Unified 60° / Pipe Parallel 55° | - | - | - | - | - | - | - | - | - | - | ISO Meter 60° | General-purpose 60° | - | - | - | - | - |
No. of Teeth (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 8 ~ 28 | - | - | - | - | - | - | - | - | - | - | 6 ~ 4 ~ 19 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Pitch (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 0.5–1.5 ~ 4 | - | - | - | - | - | - | - | - | - | - | 0.5 ~ 6 | - | - | - | - | - | - | - | - | - | - | 0.5 ~ 2 | 3.5~5 | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy