(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
Inner Diameter Thread Cutting Tip
KYOCERA
•Shape : T (Triangular)
•Use : Tapping
•Work Material : Cast Iron, Non-Ferrous Metal, Stainless Steel, Steel
•Rake Angle : Positive
•Preferred Hand : Right
•Nose R : 0.2, Others
For complete product overview and details on Inner Diameter Thread Cutting Tip, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Finishing"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CCGT for Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
Outer Diameter Grooving Tip GBA32/GBA43
KYOCERA
•Shape : Others
•Use : Grooving / Parting
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, High-Hardness Material, Non-Ferrous Metal, Stainless Steel, Steel
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Outer Diameter Grooving Tip GBA32/GBA43, see the sections below:
Days to Ship: | 7 Days or more |
---|
Outer Diameter Grooving Chip GBA32 / GBA43 Full R Groove
KYOCERA
•Shape : Others
•Use : Grooving / Parting
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, High-Hardness Material, Non-Ferrous Metal, Stainless Steel, Steel
•Preferred Hand : Left, Right
•Nose R : Others
For complete product overview and details on Outer Diameter Grooving Chip GBA32 / GBA43 Full R Groove, see the sections below:
Days to Ship: | 8 Days or more |
---|
Lathe Turning (1-Corner Specification) Diamond
KYOCERA
•Shape : Others
•Use : Grooving / Parting
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Rake Angle : Positive
•Preferred Hand : Left, No Preferred Hand, Right
•Nose R : 0.2, Others
For complete product overview and details on Lathe Turning (1-Corner Specification) Diamond, see the sections below:
Days to Ship: | 8 Days or more |
---|
KTKF Type/KTKF Type Space Holder Conforming Tip
KYOCERA
The right-handed (R) holder conforms to right-handed (R) tips while the left-handed (L) holder conforms to left-handed (L) tips.
Days to Ship: | 10 Days or more |
---|
60° Triangle Negative with Hole TNGG16○○-B "Finishing to Medium"
KYOCERA
•No. of Usable Corners : 6~6
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on 60° Triangle Negative with Hole TNGG16○○-B Finishing to Medium, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 80°, Positive, with Hole, CCET "for Finishing"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CCET for Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
Turning Insert Diamond 55°, Positive, with Hole, DCET○○-FSF/F "Finishing"
KYOCERA
•Shape : D (55° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Turning Insert Diamond 55°, Positive, with Hole, DCET○○-FSF/F Finishing, see the sections below:
Days to Ship: | 9 Days or more |
---|
Turning Insert Diamond 55°, Positive, with Hole, DCGT "Low-Feed"
KYOCERA
•Shape : D (55° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Turning Insert Diamond 55°, Positive, with Hole, DCGT Low-Feed, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Positive with Hole TPGH "Finishing"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, 0.8, Others
For complete product overview and details on 60° Triangle Positive with Hole TPGH Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
Inner Diameter Thread Cutting Tip 11IR/L○○ISO-TF
KYOCERA
•Shape : T (Triangular)
•Use : Tapping
•Work Material : Stainless Steel, Steel
•Rake Angle : Positive
•Preferred Hand : Right
•Nose R : Others
For complete product overview and details on Inner Diameter Thread Cutting Tip 11IR/L○○ISO-TF, see the sections below:
Days to Ship: | 8 Days or more |
---|
Lathe Tip (Negative) TNGG【10 Pieces Per Package】
MISUMI
Cermet material used to achieve high surface roughness finish
Days to Ship: | 8 Days or more |
---|
SUMITOMO ELEC
An insert for a variety of replaceable tool bits.
Days to Ship: | 8 Days or more |
---|
Chip (Groove Insertion Chip TGA Type for Chip Breakers for Square Grooves) TGAR
SUMITOMO ELEC
Insert for cutting tools.
•Shape: T (Triangle)
•Selfishly: Right-hand
Days to Ship: | 8 Days or more |
---|
S...KTTX Type (Sleeve Holder for External Diameter) Compatible Tip
KYOCERA
•Shape : T (Triangular)
•Use : Tapping
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Preferred Hand : Right
•Nose R : Others
For complete product overview and details on S...KTTX Type (Sleeve Holder for External Diameter) Compatible Tip, see the sections below:
Days to Ship: | 8 Days or more |
---|
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on 60° Triangle Negative with Hole TNMG1604○○L/R-ST Medium to Rough Stainless Steel Heat-Resistant Alloy, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Negative with Hole TNGG22○○-C "Medium to Rough"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on 60° Triangle Negative with Hole TNGG22○○-C Medium to Rough, see the sections below:
Days to Ship: | 10 Days or more |
---|
Turning Insert Diamond 80°, Positive, with Hole, CPMH "for Finishing to Intermediate Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : Left, No Preferred Hand, Right
For complete product overview and details on Turning Insert Diamond 80°, Positive, with Hole, CPMH for Finishing to Intermediate Cutting, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Positive with Hole TBGT "Finishing"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on 60° Triangle Positive with Hole TBGT Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
60° Triangle Positive with Hole TCGT "Low Feed"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on 60° Triangle Positive with Hole TCGT Low Feed, see the sections below:
Days to Ship: | 8 Days or more |
---|
Diamond Shape 35° / Positive with Hole VBGT
KYOCERA
•Shape : V (35° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish, Medium Cutting
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, 0.8, Others
For complete product overview and details on Diamond Shape 35° / Positive with Hole VBGT, see the sections below:
Days to Ship: | 8 Days or more |
---|
80° Hexagon Type Positive with Hole WBGT "Finishing"
KYOCERA
•Shape : W (Hexagonal)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on 80° Hexagon Type Positive with Hole WBGT Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
Inner Diameter Thread Cutting Tip 11IR/L○○ISO
KYOCERA
•Shape : T (Triangular)
•Use : Tapping
•Work Material : Cast Iron, Non-Ferrous Metal, Stainless Steel, Steel
•Rake Angle : Positive
•Preferred Hand : Right
•Nose R : Others
For complete product overview and details on Inner Diameter Thread Cutting Tip 11IR/L○○ISO, see the sections below:
Days to Ship: | 8 Days or more |
---|
Sandvik CoroThread 266 Thread-Cutting Tip 1125
SANDVIK
[Features]
· CoroThread 266, Thread Cutting Tip
· Coated carbide tip.
· New concept tip achieves simple installation and has a high clamp rigidity guide rail
[Applications]
· For outer diameter threading
Days to Ship: | 6 Days or more |
---|
KYOCERA
•Shape : Others
•Use : Grooving / Parting
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Preferred Hand : Left, Right
For complete product overview and details on End Face Grooving Tip GVF, see the sections below:
Days to Ship: | 6 Days or more |
---|
SANWASEISAKUSYO
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Rake Angle : Negative
•Preferred Hand : Right
For complete product overview and details on Triangular Chip R Breaker, see the sections below:
Days to Ship: | 8 Days or more |
---|
Tip (SEC - Thread Cutting Tool STH Type) - Right-hand
SUMITOMO ELEC
Lineups include various cutting edge replaceable tool inserts.
Days to Ship: | 8 Days or more |
---|
Tip (SEC - Grooving Tool GND Type) - Right-hand
SUMITOMO ELEC
Lineups include various cutting edge replaceable tool inserts.
Days to Ship: | 8 Days or more |
---|
Insert (For SEC-Small Diameter Cut-Off Tool Bit SCT Type), Left-Handed Insert For Left-Handed Holder
SUMITOMO ELEC
An insert for a variety of replaceable tool bits.
Days to Ship: | 8 Days or more |
---|
Insert (For SEC-Small Diameter Cut-Off Tool Bit SCT Type), Non-Handed Insert For Left-Handed Holder
SUMITOMO ELEC
An insert for a variety of replaceable tool bits.
Days to Ship: | 8 Days or more |
---|
SUMITOMO ELEC
An insert for a variety of replaceable tool bits.
Days to Ship: | 8 Days or more |
---|
SUMITOMO ELEC
An insert for a variety of replaceable tool bits.
Days to Ship: | 8 Days or more |
---|
Chip (for Blank Groove Insertion Chip TGA Type) TGAR-T
SUMITOMO ELEC
Insert for cutting tools.
•Shape: T (Triangle)
•Selfishly: Right-hand
Days to Ship: | 8 Days or more |
---|
SUMITOMO ELEC
Unique CBN sintered tool (Sumiboron) insert. It possesses high hardness and exceptional heat resistance compared to conventional tool material.
Days to Ship: | 8 Days or more |
---|
Tip for Turning Triangle Shape / Negative / with Hole TNMGR-SG
DIJET
[Features]
· Suitable for high-efficiency machining.
Days to Ship: | 8 Days or more |
---|
Diamond Shape 70° / Positive with Hole JCET/JCGT
KYOCERA
•Shape : Others
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Diamond Shape 70° / Positive with Hole JCET/JCGT, see the sections below:
Days to Ship: | 8 Days or more |
---|
For Grooving (1 Corner Type) CBN
KYOCERA
•No. of Usable Corners : 1~1
•Nose R : 0.2~0.2
For complete product overview and details on For Grooving (1 Corner Type) CBN, see the sections below:
Days to Ship: | 8 Days or more |
---|
KYOCERA
•No. of Usable Corners : 1~1
For complete product overview and details on EZ Bar (EZB-NB CBN), see the sections below:
Days to Ship: | 10 Days or more |
---|
Diamond for Groove Insertion and Horizontal Feeding
KYOCERA
•Shape : Others
•Use : Grooving / Parting
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Preferred Hand : Left, Right
•Nose R : Others
For complete product overview and details on Diamond for Groove Insertion and Horizontal Feeding, see the sections below:
Days to Ship: | 10 Days or more |
---|
System Bar Diamond for Small Bores
KYOCERA
•Shape : Others
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Rake Angle : Positive
•Preferred Hand : Right
For complete product overview and details on System Bar Diamond for Small Bores, see the sections below:
Days to Ship: | 8 Days or more |
---|
KYOCERA
•Shape : Others
•Use : Other, Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Rake Angle : Positive
•Preferred Hand : Left, Right
•Nose R : Others
For complete product overview and details on Tip Diamond for Small Bores, see the sections below:
Days to Ship: | 8 Days or more |
---|
Outer Diameter Threading Tool Holder KTT Type, Compatible Chip
KYOCERA
•Shape : T (Triangular)
•Use : Tapping
•Work Material : Cast Iron, Non-Ferrous Metal, Stainless Steel, Steel
•Preferred Hand : Left, Right
•Nose R : 0.2, 0.4, Others
For complete product overview and details on Outer Diameter Threading Tool Holder KTT Type, Compatible Chip, see the sections below:
Days to Ship: | 8 Days or more |
---|
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNGG12○○R/L-A3 for Finishing to Intermediate Cutting / Sharp Edge for Aluminum / Nonferrous Metals, see the sections below:
Days to Ship: | 10 Days or more |
---|
Turning Insert Diamond 80°, Negative, with Hole, CNGG0904○○R/L-S "for Finishing"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNGG0904○○R/L-S for Finishing, see the sections below:
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Shape |
Use |
No. of Usable Corners |
Work Material |
Breaker Application |
Rake Angle |
Preferred Hand |
Nose R |
Outer Diameter / Inner Diameter (For Tapping) |
Groove Width (For Grooving / Parting) |
Thread Type (For Tapping) |
No. of Teeth (For Tapping) |
Pitch (For Tapping) |
Brand | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | MISUMI | SUMITOMO ELEC | SUMITOMO ELEC | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | SANDVIK | KYOCERA | SANWASEISAKUSYO | SUMITOMO ELEC | SUMITOMO ELEC | SUMITOMO ELEC | SUMITOMO ELEC | SUMITOMO ELEC | SUMITOMO ELEC | SUMITOMO ELEC | SUMITOMO ELEC | DIJET | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Product Series | Turning Insert Diamond 80°, Positive, with Hole, CCGT "for Finishing" | 60° Triangle Negative with Hole TNGG16○○-B "Finishing to Medium" | Turning Insert Diamond 80°, Positive, with Hole, CCET "for Finishing" | Turning Insert Diamond 55°, Positive, with Hole, DCET○○-FSF/F "Finishing" | Turning Insert Diamond 55°, Positive, with Hole, DCGT "Low-Feed" | Chip (Groove Insertion Chip TGA Type for Chip Breakers for Square Grooves) TGAR | S...KTTX Type (Sleeve Holder for External Diameter) Compatible Tip | 60° Triangle Negative with Hole TNGG22○○-C "Medium to Rough" | Turning Insert Diamond 80°, Positive, with Hole, CPMH "for Finishing to Intermediate Cutting" | Insert (For SEC-Small Diameter Cut-Off Tool Bit SCT Type), Left-Handed Insert For Left-Handed Holder | Insert (For SEC-Small Diameter Cut-Off Tool Bit SCT Type), Non-Handed Insert For Left-Handed Holder | Tip for Turning Triangle Shape / Negative / with Hole TNMGR-SG | Outer Diameter Threading Tool Holder KTT Type, Compatible Chip | Turning Insert Diamond 80°, Negative, with Hole, CNGG0904○○R/L-S "for Finishing" | |||||||||||||||||||||||||||||||
Days to Ship | 8 Days or more | 8 Days or more | 7 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 9 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 6 Days or more | 6 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more |
Shape | T (Triangular) | C (80° Diamond) | Others | Others | Others | Others | T (Triangular) | C (80° Diamond) | D (55° Diamond) | D (55° Diamond) | T (Triangular) | T (Triangular) | T (Triangular) | Others | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | C (80° Diamond) | T (Triangular) | T (Triangular) | V (35° Diamond) | W (Hexagonal) | T (Triangular) | - | Others | T (Triangular) | Others | Others | Others | Others | Others | Others | T (Triangular) | C (80° Diamond) | T (Triangular) | Others | Others | Others | Others | Others | Others | T (Triangular) | C (80° Diamond) | C (80° Diamond) |
Use | Tapping | Outer Diameter / Inner Diameter | Grooving / Parting / Tapping | Grooving / Parting | Grooving / Parting | Tapping | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Tapping | Outer Diameter / Inner Diameter | Grooving / Parting | Grooving / Parting | Tapping | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Tapping | - | Grooving / Parting | Outer Diameter / Inner Diameter | Tapping | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | Grooving / Parting | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Grooving / Parting | - | Grooving / Parting | Outer Diameter / Inner Diameter | Other | Tapping | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter |
No. of Usable Corners | 3 | 2 | - | - | 1 | - | 6 | 2 | 2 | 2 | 3 | 3 | 6 | - | - | - | 6 | 6 | 2 | 3 | 3 | 2 | 3 | 3 | - | - | 3 | - | - | - | - | - | - | - | - | 3 | 2 | 1 | 1 | 1 | 1 | 1 | - | 4 | 4 |
Work Material | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy / High-Hardness Material | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy / High-Hardness Material | Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel | Steel / Stainless Steel | Steel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | - | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel | Steel / Stainless Steel / Non-Ferrous Metal | Steel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | High-Hardness Material | Stainless Steel | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | High-Hardness Material | High-Hardness Material | Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron |
Breaker Application | - | Finish | - | - | - | - | Medium Cutting | Finish | Finish | Medium Cutting | Finish | - | Finish | - | - | - | Medium - Heavy Cutting | Heavy Cutting | Medium Cutting | Finish | Medium Cutting | Finish / Medium Cutting | Finish | - | - | - | - | - | - | - | - | - | - | - | - | - | Finish | - | - | - | - | - | - | Medium Cutting | Finish |
Rake Angle | Positive | Positive | - | - | - | - | Negative | Positive | Positive | Positive | Positive | Positive | Negative | - | - | - | Negative | Negative | Positive | Positive | Positive | Positive | Positive | Positive | - | - | Negative | - | - | - | - | - | - | - | - | Negative | Positive | - | - | - | Positive | - | - | Negative | Negative |
Preferred Hand | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right | Right |
Nose R | 0.2 ~ Others | 0.2 ~ Others | 0.2 ~ Others | Others | Others | Others | 0.2 ~ 0.8 | 0.2 ~ Others | 0.2 ~ Others | 0.2 ~ Others | 0.2 ~ Others | Others | 0.4 ~ 0.8 | Others | Others | Others | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.4 ~ 0.8 | 0.2 ~ Others | 0.2 ~ Others | 0.2 ~ Others | 0.2 ~ 0.4 | Others | - | 0.2 ~ 0.4 | 0.2 | Others | 0.2 | Others | Others | Others | Others | - | 0.2 | 0.8 | 0.2 | 0.2 | Others | Others | 0.2 | Others | 0.2 ~ Others | 0.4 ~ 0.8 | 0.2 ~ 0.4 |
Outer Diameter / Inner Diameter (For Tapping) | Minor Diameter | - | - | - | - | - | - | - | - | - | - | Minor Diameter | - | - | - | - | - | - | - | - | - | - | - | Minor Diameter | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Groove Width (For Grooving / Parting) | - | - | 0.5 ~ 4.8 | 1 ~ 4 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 2 ~ 6 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Thread Type (For Tapping) | Unified 60° / General-purpose 60° / Wit 55° / General-purpose 55° / Pipe Taper 55° / American Pipe 60° / Trapezoidal 30° | - | - | - | - | - | - | - | - | - | - | ISO Meter 60° | - | - | - | - | - | - | - | - | - | - | - | ISO Meter 60° | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
No. of Teeth (For Tapping) | 8 ~ 28 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Pitch (For Tapping) | 0.5–1.5 ~ 4 | - | - | - | - | - | - | - | - | - | - | 1 ~ 1.5 | - | - | - | - | - | - | - | - | - | - | - | 0.5 ~ 2 | - | - | - | 0.50 to 1.25 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy