(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Turning Inserts（Rake Angle：Negative）
| Days to Ship |
|
|---|
-
Lathe Tip (Negative) TNGG【10 Pieces Per Package】
MISUMI
Cermet material used to achieve high surface roughness finish
- Volume Discount
Days to Ship: 8 Days or more -
60° Triangle Negative with Hole TNMG16○○PP "Finishing"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Negative with Hole TNMG16○○PP Finishing, see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
60° Triangle Negative with Hole TNMG○○GP "Finishing"
KYOCERA
[Specifications]
· Shape: T (Triangle)
· Number of Usable Corners: 6
· Rake Angle: Negative
· Handedness: No Handedness
[Applications]
· Machining Applications: For O.D., I.D.
· Breaker Applications: Finishing- Volume Discount
Days to Ship: 8 Days or more -
60° Triangle Negative with Hole TNMG1604○○-C "Medium to Rough"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on 60° Triangle Negative with Hole TNMG1604○○-C Medium to Rough, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Diamond Shape 80° / Negative CBN Diamond CNGA
KYOCERA
[Specifications]
· Shape: C (80° Diamond)
· Rake Angle: Negative
· Handedness: No Handedness
[Applications]
· Machining Applications: For O.D., I.D.- Volume Discount
Days to Ship: 8 Days or more -
Diamond Shape 35° / Negative CBN Diamond VNGA
KYOCERA
[Specifications]
· Shape: V (35° Diamond)
· Rake Angle: Negative
· Handedness: No Handedness
[Applications]
· Machining Applications: For O.D., I.D.- Volume Discount
Days to Ship: 8 Days or more -
SANWASEISAKUSYO
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Rake Angle : Negative
•Preferred Hand : Right
For complete product overview and details on Triangular Chip R Breaker, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
KYOCERA
•Use: Outer Diameter / Inner Diameter
•Shape: R (Round)
•Rake Angle: Negative
•Preferred Hand: No Preferred Hand
•rε: -- Volume Discount
Days to Ship: 10 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG09○○GS "for Intermediate to Rough Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG09○○GS "for Intermediate to Rough Cutting", see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PS "for Intermediate to Rough Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PS for Intermediate to Rough Cutting, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○MS, for Intermediate to Rough Cutting for Stainless Steel / Heat Resistant Alloy, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○GC "for Rough Cutting" for Cast Iron
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○GC for Rough Cutting for Cast Iron, see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNGG12○○R/L-A3 for Finishing to Intermediate Cutting / Sharp Edge for Aluminum / Nonferrous Metals, see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
KYOCERA
•Shape : D (55° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○PT for Intermediate to Rough Cutting / High-Feed, see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
KYOCERA
•Shape : D (55° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 55°, Negative, with Hole, DNMG15○○MQ, for Finishing to Intermediate Cutting for Stainless Steel / Heat Resistant Alloy, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
60° Triangle Negative with Hole TNMG16○○ "Rough Cutting"
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
•Nose R : 0.4, 0.8, 1.2, 1.6, Others
For complete product overview and details on 60° Triangle Negative with Hole TNMG16○○ Rough Cutting, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
60° Triangle Negative with Hole TNMG16○○XS "Rough Cutting" Mild Steel
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 60° Triangle Negative with Hole TNMG16○○XS Rough Cutting Mild Steel, see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
60° Triangle Negative with Hole TNGG16○○-B "Finishing to Medium"
KYOCERA
•No. of Usable Corners : 6~6
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : Left, Right
For complete product overview and details on 60° Triangle Negative with Hole TNGG16○○-B Finishing to Medium, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 35°, Negative, with Hole, VNMG○○PP, "for Finishing"
KYOCERA
•Shape : V (35° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 35°, Negative, with Hole, VNMG○○PP, for Finishing, see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
Turning Insert Diamond 35°, Negative, with Hole, VNMG○○VF, "for Finishing to Intermediate Cutting"
KYOCERA
•Shape : V (35° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 35°, Negative, with Hole, VNMG○○VF, for Finishing to Intermediate Cutting, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
80° Hexagon Type Negative with Hole WNMG○○PS "Medium to Rough"
KYOCERA
•Shape : W (Hexagonal)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 80° Hexagon Type Negative with Hole WNMG○○PS Medium to Rough, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
80° Hexagon Type Negative with Hole WNMG○○TK "Medium to Rough" Stainless Steel Heat-Resistant Alloy
KYOCERA
•Shape : W (Hexagonal)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 80° Hexagon Type Negative with Hole WNMG○○TK Medium to Rough Stainless Steel Heat-Resistant Alloy, see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
80° Hexagon Type Negative with Hole WNMG○○MS "Medium to Rough" Stainless Steel Heat-Resistant Alloy
KYOCERA
•Shape : W (Hexagonal)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 80° Hexagon Type Negative with Hole WNMG○○MS Medium to Rough Stainless Steel Heat-Resistant Alloy, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
80° Hexagon Type Negative with Hole WNMG○○MU "Medium to Rough" Stainless Steel Heat-Resistant Alloy
KYOCERA
•Shape : W (Hexagonal)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Stainless Steel
•Breaker Application : Medium - Heavy Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on 80° Hexagon Type Negative with Hole WNMG○○MU Medium to Rough Stainless Steel Heat-Resistant Alloy, see the sections below:- Volume Discount
Days to Ship: 9 Days or more -
Square 90°, Negative CBN Diamond SNGA
KYOCERA
[Specifications]
· Shape: S (Square)
· Number of Usable Corners: 2
· Rake Angle: Negative
· Handedness: No Handedness
[Applications]
· Machining Applications: For O.D., I.D.- Volume Discount
Days to Ship: 11 Days or more -
T-Max P Negative Insert For Turning (Triangular Shaped 60°)
SANDVIK
[Features]
Carbide-coated insert
Triangular-shaped insert
Negative insert
For machining general steel and low-carbon steel
For finishing- Volume Discount
Days to Ship: 11 Days or more -
SANWASEISAKUSYO
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Non-Ferrous Metal, Stainless Steel, Steel
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
•Nose R : 0.2, 0.4, 0.8, 1.2, Others
For complete product overview and details on Triangular Chip TOP Breaker, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
SANWASEISAKUSYO
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Rake Angle : Negative
•Preferred Hand : Left
For complete product overview and details on Triangular Chip L Breaker, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Tip for Turning Triangle Shape / Negative / with Hole TNMGR-SG
DIJET
[Features]
· Suitable for high-efficiency machining.- Volume Discount
Days to Ship: 8 Days or more -
Round, Negative, with Hole RNMG
KYOCERA
•Use: Outer Diameter / Inner Diameter
•Shape: R (Round)
•No. of Usable Corner: 9 or more
•Rake Angle: Negative
•Breaker Application: Medium Cutting- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 80°, Negative
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, High-Hardness Material
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 55° / Diamond 75°, Negative
KYOCERA
•Shape : D (55° Diamond), Others
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, High-Hardness Material
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
•Nose R : 0.4, 0.8, 1.2, 1.6, Others
For complete product overview and details on Turning Insert Diamond 55° / Diamond 75°, Negative, see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
KYOCERA
•Shape : T (Triangular)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, High-Hardness Material
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
•Nose R : 0.4, 0.8, 1.2, 1.6, Others
For complete product overview and details on 60° Triangle Negative, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 35°, Negative
KYOCERA
•Shape : V (35° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, High-Hardness Material
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 35°, Negative, see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
KYOCERA
•Shape : C (80° Diamond), R (Round), S (Square), T (Triangular)
•Use : Outer Diameter / Inner Diameter
•No. of Usable Corners : 4~8
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
•Nose R : 0.8, 1.2, 1.6, Others
For complete product overview and details on Negative (Solid) CBN, see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
Turning Insert Diamond Negative
KYOCERA
•Shape : C (80° Diamond), D (55° Diamond), T (Triangular), V (35° Diamond), W (Hexagonal)
•Use : Outer Diameter / Inner Diameter
•Work Material : Heat-Resistant Alloy, Titanium Alloy, Non-Ferrous Metal
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond Negative, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
OSG
[Specifications]
· Shape: Insert (for turning)
· Work Material: Steel, Stainless Steel, Cast Iron
[Application] Turning- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○WP "For Finishing" with Wiper Edge
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○WP For Finishing with Wiper Edge, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○WQ "for Finishing to Intermediate Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○WQ for Finishing to Intermediate Cutting, see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PP "for Finishing"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PP for Finishing, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG09○○GP "for Finishing"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG09○○GP "for Finishing", see the sections below:- Volume Discount
Days to Ship: 11 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○GP "for Finishing"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Finish
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○GP "for Finishing", see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PQ "for Finishing to Intermediate Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PQ for Finishing to Intermediate Cutting, see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Turning Insert Diamond 80°, Negative, with Hole, CNMG09○○HQ "for Finishing to Intermediate Cutting"
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG09○○HQ "for Finishing to Intermediate Cutting", see the sections below:- Volume Discount
Days to Ship: 10 Days or more -
KYOCERA
•Shape : C (80° Diamond)
•Use : Outer Diameter / Inner Diameter
•Work Material : Cast Iron, Heat-Resistant Alloy, Titanium Alloy, Stainless Steel, Steel
•Breaker Application : Medium Cutting
•Rake Angle : Negative
•Preferred Hand : No Preferred Hand
For complete product overview and details on Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○HQ/CNGG12○○HQ for Finishing to Intermediate Cutting, see the sections below:- Volume Discount
Days to Ship: 8 Days or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Shape |
| Use |
| No. of Usable Corners |
| Work Material |
| Breaker Application |
| Rake Angle |
| Preferred Hand |
| Nose R |
| Outer Diameter / Inner Diameter (For Tapping) |
| Groove Width (For Grooving / Parting) |
| Thread Type (For Tapping) |
| No. of Teeth (For Tapping) |
| Pitch (For Tapping) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | MISUMI | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | SANWASEISAKUSYO | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | SANDVIK | SANWASEISAKUSYO | SANWASEISAKUSYO | DIJET | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | OSG | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA | KYOCERA |
| Product Series | 60° Triangle Negative with Hole TNMG1604○○-C "Medium to Rough" | Turning Insert Diamond 80°, Negative, with Hole, CNMG09○○GS "for Intermediate to Rough Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PS "for Intermediate to Rough Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○GC "for Rough Cutting" for Cast Iron | 60° Triangle Negative with Hole TNMG16○○XS "Rough Cutting" Mild Steel | 60° Triangle Negative with Hole TNGG16○○-B "Finishing to Medium" | Turning Insert Diamond 35°, Negative, with Hole, VNMG○○PP, "for Finishing" | Turning Insert Diamond 35°, Negative, with Hole, VNMG○○VF, "for Finishing to Intermediate Cutting" | 80° Hexagon Type Negative with Hole WNMG○○PS "Medium to Rough" | 80° Hexagon Type Negative with Hole WNMG○○TK "Medium to Rough" Stainless Steel Heat-Resistant Alloy | 80° Hexagon Type Negative with Hole WNMG○○MS "Medium to Rough" Stainless Steel Heat-Resistant Alloy | 80° Hexagon Type Negative with Hole WNMG○○MU "Medium to Rough" Stainless Steel Heat-Resistant Alloy | Tip for Turning Triangle Shape / Negative / with Hole TNMGR-SG | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○WP "For Finishing" with Wiper Edge | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○WQ "for Finishing to Intermediate Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PP "for Finishing" | Turning Insert Diamond 80°, Negative, with Hole, CNMG09○○GP "for Finishing" | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○GP "for Finishing" | Turning Insert Diamond 80°, Negative, with Hole, CNMG12○○PQ "for Finishing to Intermediate Cutting" | Turning Insert Diamond 80°, Negative, with Hole, CNMG09○○HQ "for Finishing to Intermediate Cutting" | |||||||||||||||||||||||||
| Days to Ship | 8 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 11 Days or more | 10 Days or more | 11 Days or more | 8 Days or more | 8 Days or more | 11 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 9 Days or more | 11 Days or more | 11 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 11 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 8 Days or more |
| Shape | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | C (80° Diamond) | V (35° Diamond) | T (Triangular) | R (Round) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | D (55° Diamond) | D (55° Diamond) | T (Triangular) | T (Triangular) | T (Triangular) | V (35° Diamond) | V (35° Diamond) | W (Hexagonal) | W (Hexagonal) | W (Hexagonal) | W (Hexagonal) | S (Square) | T (Triangular) | T (Triangular) | T (Triangular) | T (Triangular) | R (Round) | C (80° Diamond) | D (55° Diamond) / Others | T (Triangular) | V (35° Diamond) | C (80° Diamond) / R (Round) / S (Square) / T (Triangular) | C (80° Diamond) / D (55° Diamond) / T (Triangular) / V (35° Diamond) / W (Hexagonal) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) | C (80° Diamond) |
| Use | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Other | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter | Outer Diameter / Inner Diameter |
| No. of Usable Corners | 6 | 6 | 6 | 6 | 2 | 2 | 3 | - | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 6 | 6 | 6 | 4 | 4 | 6 | 6 | 6 | 6 | 2 | 3 | 3 | 3 | 3 | 9 or more | - | - | - | - | 4 / 6 / 8 | 1 | - | 4 | 4 | 4 | 4 | 4 | 4 | 4 | 4 |
| Work Material | Steel / Stainless Steel | Steel | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Cast Iron / High-Hardness Material | Cast Iron / High-Hardness Material | Steel / Stainless Steel | Cast Iron / Heat-Resistant Alloy, Titanium Alloy / High-Hardness Material | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | Cast Iron | Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel | Steel | Steel / Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | Stainless Steel / Heat-Resistant Alloy, Titanium Alloy | High-Hardness Material | Stainless Steel | Steel / Stainless Steel / Cast Iron / Non-Ferrous Metal | Steel / Stainless Steel | Stainless Steel | Steel / Stainless Steel / Cast Iron | Cast Iron / Heat-Resistant Alloy, Titanium Alloy / High-Hardness Material | Cast Iron / High-Hardness Material | Cast Iron / High-Hardness Material | Cast Iron / High-Hardness Material | - | Non-Ferrous Metal / Heat-Resistant Alloy, Titanium Alloy | Steel / Stainless Steel / Cast Iron | Steel | Steel / Cast Iron | Steel | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron | Steel | Steel / Stainless Steel / Cast Iron | Steel / Stainless Steel / Cast Iron / Heat-Resistant Alloy, Titanium Alloy |
| Breaker Application | Finish | Finish | Finish | Heavy Cutting | - | - | - | - | Medium - Heavy Cutting | Medium - Heavy Cutting | Medium - Heavy Cutting | Heavy Cutting | Medium Cutting | Medium - Heavy Cutting | Medium Cutting | Medium Cutting | Heavy Cutting | Medium Cutting | Finish | Medium Cutting | Medium - Heavy Cutting | Medium - Heavy Cutting | Medium - Heavy Cutting | Medium - Heavy Cutting | - | Finish | - | - | - | Medium Cutting | - | - | - | - | - | - | - | Finish | Medium Cutting | Finish | Finish | Finish | Medium Cutting | Medium Cutting | Medium Cutting |
| Rake Angle | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative | Negative |
| Preferred Hand | Right / Left | No Preferred Hand | No Preferred Hand | Right / Left | No Preferred Hand | No Preferred Hand | Right | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | Right / Left | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | Right / Left | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | Left | Right | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand | No Preferred Hand |
| Nose R | 0.4 ～ 0.8 | 0.2 ～ 1.2 | 0.2 ～ 0.8 | 0.4 ～ 0.8 | 0.2 ～ Others | 0.2 ～ Others | 0.2 | - | 0.4 ～ 0.8 | 0.4 ～ 1.6 | 0.4 ～ 1.6 | 0.8 ～ 1.2 | 0.4 ～ 0.8 | 0.8 ～ 1.2 | 0.4 ～ 0.8 | 0.4 ～ Others | 0.8 | 0.2 ～ 0.8 | 0.2 ～ 1.2 | 0.4 ～ 1.2 | 0.4 ～ 1.6 | 0.4 ～ 0.8 | 0.4 ～ 1.2 | 0.4 ～ 0.8 | 0.4 ～ 1.2 | 0.4 | 0.2 ～ 0.8 | 0.2 | 0.8 | - | 0.4 ～ 1.6 | 0.4 ～ 1.6 | 0.4 ～ 1.2 | 0.4 ～ 1.2 | 0.8 ～ Others | 0.2 ～ 1.2 | 0.8 | 0.4 ～ 0.8 | 0.4 ～ 1.2 | 0.2 ～ 1.2 | 0.4 | 0.2 ～ 0.8 | 0.4 ～ 1.2 | 0.4 ～ 0.8 | 0.4 ～ 1.2 |
| Outer Diameter / Inner Diameter (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Groove Width (For Grooving / Parting) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Thread Type (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| No. of Teeth (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Pitch (For Tapping) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Specification/Dimensions
-
Shape
- C (80° Diamond)
- D (55° Diamond)
- R (Round)
- S (Square)
- T (Triangular)
- V (35° Diamond)
- W (Hexagonal)
- Others
-
Use
- Outer Diameter / Inner Diameter
- Grooving / Parting
- Tapping
- Other
-
No. of Usable Corners
- 1
- 2
- 3
- 4
- 6
- 8
- 9 or more
-
Work Material
- Steel
- Stainless Steel
- Cast Iron
- Non-Ferrous Metal
- Heat-Resistant Alloy, Titanium Alloy
- High-Hardness Material
-
Breaker Application
- Finish
- Medium Cutting
- Medium - Heavy Cutting
- Heavy Cutting
- Light Cutting
-
Rake Angle
- Negative
- Positive
-
Preferred Hand
-
Nose R
-
Outer Diameter / Inner Diameter (For Tapping)
-
Metric / Inch
- metric
-
Groove Width (For Grooving / Parting)
-
Thread Type (For Tapping)
-
No. of Teeth (For Tapping)
-
Pitch (For Tapping)
Narrow search by specifying Manufacturer
-
- KYOCERA (228)
- SANWASEISAKUSYO (3)
- DIJET (1)
- OSG (1)
- SANDVIK (1)
- DAISHOWASEIKI (0)
- NOGA JAPAN (0)
- KOSHUHA (0)
- SUMITOMO ELEC (0)
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy