(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Square End Mills (HSS)（Tool Material Type：Cobalt High-Speed Steel）
| Days to Ship |
|
|---|
-
2-Flute, General-Purpose, Long Type EDL
OSG
Non-coated, 30° torsion.
For complete product overview and details on 2-Flute, General-Purpose, Long Type EDL see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
High-Speed Steel Square End Mill, 4-Flute, Long/Non-Coated Model
MISUMI
40° helix that's stronger than the 2-blade type is ideal for side milling
- Volume Discount
- Non-Coated
- 4 Flutes
- L (Long)
Days to Ship: 8 Days or more -
High-Speed Steel 0.01mm Unit Outer Diameter Designated End Mill, 2-Flute/Short
MISUMI
Can be freely selected in 0.01 mm increments while being affordable
- Non-Coated
- 2 Flutes
- S (Short)
Days to Ship: 10 Days or more -
High-Speed Steel 0.01mm Unit Outer Diameter Designated End Mill, 2-Flute/Regular
MISUMI
Can be freely selected in 0.01 mm increments while being affordable
- Non-Coated
- 2 Flutes
- R (Regular)
Days to Ship: 10 Days or more -
2-Flute, General-Purpose, Short Type EDS
OSG
HSS square series.
For complete product overview and details on 2-Flute, General-Purpose, Short Type EDS see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
End Mill (Multi-Flute Center Cut Long Type) CC-EML
OSG
30° torsion cobalt HSS square, long size.
- Volume Discount
Days to Ship: 8 Days or more -
End Mill (2-Flute for Stainless Steel) SUS-EDS
OSG
It is a square HSS end mill for stainless steel.
- Volume Discount
Days to Ship: 8 Days or more -
OSG
For Key Groove (OL2)
For complete product overview and details on For 2-Flute Keyway EKD (OL2) see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
LVS2T 2-Flute Blade Long Blade
S&K
A 2-flute end mill for finish machining. Enables a wide range of side machining and deep engraving, due to the long flute length.
- Volume Discount
Days to Ship: 8 Days or more -
AS Coated High-Speed Steel Square End Mill, 2-Flute, Short
MISUMI
AS coating that provides improved processing efficiency in high-speed steel end mill
- Volume Discount
- AS
- 2 Flutes
- S (Short)
Days to Ship: 8 Days or more -
AS Coated High-Speed Steel Square End Mill, 2-Flute/Regular
MISUMI
AS coating that provides improved processing efficiency in high-speed steel end mill
- Volume Discount
- AS
- 2 Flutes
- R (Regular)
Days to Ship: 8 Days or more -
AS Coated High-Speed Steel Square End Mill, 2-Flute/Long
MISUMI
AS coating that provides improved processing efficiency in high-speed steel end mill
- Volume Discount
- AS
- 2 Flutes
- L (Long)
Days to Ship: 8 Days or more -
AS Coated High-Speed Steel Square End Mill, 4-Flute/Short
MISUMI
The durability has been remarkably improved with the superior heat resistance and film hardness of the AS coating over conventional products
- Volume Discount
- AS
- 4 Flutes
- S (Short)
Days to Ship: 8 Days or more -
AS Coated High-Speed Steel Square End Mill, 4-Flute/Regular
MISUMI
The durability has been remarkably improved with the superior heat resistance and film hardness of the AS coating over conventional products
- Volume Discount
- AS
- 4 Flutes
- R (Regular)
Days to Ship: 8 Days or more -
AS Coated High-Speed Steel Square End Mill, 4-Flute/Long
MISUMI
The durability has been remarkably improved with the superior heat resistance and film hardness of the AS coating over conventional products
- Volume Discount
- AS
- 4 Flutes
- L (Long)
Days to Ship: 8 Days or more -
High-Speed Steel Square End Mill, 2-Flute/Short/Non-Coated Model
MISUMI
The non-coated 2-blade type is available from φ1 up to φ50
- Volume Discount
- Non-Coated
- 2 Flutes
- S (Short)
Days to Ship: 8 Days or more -
High-Speed Steel Square End Mill, 2-Flute/Regular/Non-Coated Model
MISUMI
The non-coated 2-blade type is available from φ1 up to φ50
- Volume Discount
- Non-Coated
- 2 Flutes
- R (Regular)
Days to Ship: 8 Days or more -
High-Speed Steel Square End Mill, 2-Flute/Long/Non-Coated Model
MISUMI
The non-coated 2-blade type is available from φ1 up to φ50
- Volume Discount
- Non-Coated
- 2 Flutes
- L (Long)
Days to Ship: 8 Days or more -
High-Speed Steel Square End Mill, 4-Flute, Short/Non-Coated Model
MISUMI
40° helix that's stronger than the 2-blade type is ideal for side milling
- Volume Discount
- Non-Coated
- 4 Flutes
- S (Short)
Days to Ship: 8 Days or more -
High-Speed Steel Square End Mill, 4-Flute, Regular/Non-Coated Model
MISUMI
40° helix that's stronger than the 2-blade type is ideal for side milling
- Volume Discount
- Non-Coated
- 4 Flutes
- R (Regular)
Days to Ship: 8 Days or more -
High-Speed Steel Corner C End Mill, 2-Flute/Short Model
MISUMI
End mill series with the C surface that can be selected in 0.1 mm increments
- Non-Coated
- 2 Flutes
- S (Short)
Days to Ship: 10 Days or more -
High-Speed Steel Corner C End Mill, 2-Flute/Regular Model
MISUMI
End mill series with the C surface that can be selected in 0.1 mm increments
- Non-Coated
- 2 Flutes
- R (Regular)
Days to Ship: 10 Days or more -
High-Speed Steel Corner C End Mill, 4-Flute/Short Model
MISUMI
End mill series with the C surface that can be selected in 0.1 mm increments
- Non-Coated
- 4 Flutes
- S (Short)
Days to Ship: 10 Days or more -
High-Speed Steel Corner C End Mill, 4-Flute/Regular Model
MISUMI
End mill series with the C surface that can be selected in 0.1 mm increments
- Non-Coated
- 4 Flutes
- R (Regular)
Days to Ship: 10 Days or more -
High-Speed Steel Blade Relief End Mill, 2-Flute/Short Model
MISUMI
A blade relief type end mill that's not affected by the interference of tools
- Non-Coated
- 2 Flutes
- S (Short)
Days to Ship: 10 Days or more -
High-Speed Steel Blade Relief End Mill, 2-Flute/Regular Model
MISUMI
A blade relief type end mill that's not affected by the interference of tools
- Non-Coated
- 2 Flutes
- R (Regular)
Days to Ship: 10 Days or more -
High-Speed Steel Blade Relief End Mill, 4-Flute/Short Model
MISUMI
A blade relief type end mill that's not affected by the interference of tools
- Non-Coated
- 4 Flutes
- S (Short)
Days to Ship: 10 Days or more -
High-Speed Steel Blade Relief End Mill, 4-Flute/Regular Model
MISUMI
A blade relief type end mill that's not affected by the interference of tools
- Non-Coated
- 4 Flutes
- R (Regular)
Days to Ship: 10 Days or more -
Nachi-Fujikoshi
Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
G Standard End Mill, 4-Flute 4GE
Nachi-Fujikoshi
It is a general-purpose coating end drill for machining from steel and stainless steel to aluminum. Suitable for side surface machining.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
G Long End Mill, 2-Flute SL2GE
Nachi-Fujikoshi
Capable of machining from steel and stainless steel to aluminum. Suitable for grooving deep grooves or in deep locations.
- Volume Discount
Days to Ship: 8 Days or more -
Nachi-Fujikoshi
A general-purpose end mill that can process anything from steel to stainless steel and aluminum.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Nachi-Fujikoshi
A general-purpose end mill that can process anything from steel to stainless steel and aluminum. Suitable for side surface machining.
- Volume Discount
Days to Ship: 8 Days or more -
Super Hard, Regular Shank, Long 4-Flute RSL4SE
Nachi-Fujikoshi
General purpose end mill. Suitable for side processing of wide side surfaces and deep positions.
- Volume Discount
Days to Ship: 8 Days or more -
Nachi-Fujikoshi
Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum. Suitable for side surface machining.
- Volume Discount
Days to Ship: 8 Days or more -
Super Hard, Regular Shank, 4-Flute 4RSE
Nachi-Fujikoshi
General purpose end mill. Suitable for side surface machining.
- Volume Discount
Days to Ship: 8 Days or more -
Super Hard, Regular Shank, Long 2-Flute RSL2SE
Nachi-Fujikoshi
General purpose end mill. Suitable for grooving deep grooves or in deep locations.
- Volume Discount
Days to Ship: 8 Days or more -
Super Hard, Long 4-Flute SL4SE
Nachi-Fujikoshi
General purpose end mill. Suitable for side processing of wide side surfaces and deep positions.
- Volume Discount
Days to Ship: 8 Days or more -
Nachi-Fujikoshi
A general-purpose end mill that can process anything from steel to stainless steel and aluminum.
- Volume Discount
Days to Ship: 8 Days or more -
AG Mill, 2-Flute Mill, Medium 2AGEM
Nachi-Fujikoshi
Capable of high-speed and high-efficiency machining of materials from steel to stainless steel and aluminum.
- Volume Discount
Days to Ship: 8 Days or more -
Nachi-Fujikoshi
Suitable for side processing of wide side surfaces and deep positions.
- Volume Discount
Days to Ship: 8 Days or more -
G Standard End Mill, 2-Flute 2GE
Nachi-Fujikoshi
[Features]
· It is a general-purpose coating end drill for machining from steel and stainless steel to aluminum.
· It is suitable for side processing- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Days to Ship: 8 Days or more -
G Long End Mill, 4-Flute SL4GE
Nachi-Fujikoshi
General purpose coated end mill. Suitable for side processing of wide side surfaces and deep positions.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
Days to Ship: 8 Days or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Specifications |
| Flute Diameter (D)(φ) |
| Flute Length (ℓ)(mm) |
| Work Material |
| Flute Shape Type |
| Number of Flutes(sheet) |
| Tool Material Type |
| Processing Applications |
| Link Diameter (d)(mm) |
| Coating |
| Overall Length (L)(mm) |
| Helix Angle (θ) |
| Base-Blade Availability |
| Length Under Neck (ℓ1)(mm) |
| Link |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | MISUMI | MISUMI | MISUMI | OSG | OSG | OSG | OSG | S&K | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | Nachi-Fujikoshi | OSG |
| Product Series | High-Speed Steel Square End Mill, 4-Flute, Long/Non-Coated Model | High-Speed Steel 0.01mm Unit Outer Diameter Designated End Mill, 2-Flute/Short | High-Speed Steel 0.01mm Unit Outer Diameter Designated End Mill, 2-Flute/Regular | High-Speed Steel Square End Mill, 2-Flute/Short/Non-Coated Model | High-Speed Steel Square End Mill, 2-Flute/Regular/Non-Coated Model | High-Speed Steel Square End Mill, 2-Flute/Long/Non-Coated Model | High-Speed Steel Square End Mill, 4-Flute, Short/Non-Coated Model | High-Speed Steel Square End Mill, 4-Flute, Regular/Non-Coated Model | High-Speed Steel Blade Relief End Mill, 2-Flute/Regular Model | High-Speed Steel Blade Relief End Mill, 4-Flute/Regular Model | |||||||||||||||||||||||||||||||||||
| Days to Ship | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more |
Same day or more
Show Stock Products |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||
| Flute Diameter (D)(φ) | 0.8 ～ 40 | 3 ～ 40 | 2.7 ～ 25 | 2.7 ～ 24.99 | 0.45 ～ 60 | 3 ～ 40 | 1.5 ～ 30 | 3 ～ 25 | 3 ～ 50 | 1 ～ 50 | 1 ～ 25 | 3 ～ 40 | 3 ～ 40 | 3 ～ 30 | 3 ～ 40 | 1 ～ 50 | 1 ～ 25 | 3 ～ 40 | 3 ～ 40 | 3 ～ 30 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 8 ～ 25 | 8 ～ 25 | 8 ～ 25 | 8 ～ 25 | 1 ～ 50 | 2.5 ～ 50 | 3 ～ 40 | 1 ～ 50 | 2.5 ～ 50 | 4 ～ 18 | 2.5 ～ 50 | 4 ～ 18 | 4 ～ 18 | 3 ～ 40 | 3.3 ～ 11.3 | 1.5 ～ 20 | 3 ～ 40 | 1 ～ 50 | 3 ～ 40 | 3 ～ 40 | 3 ～ 40 |
| Flute Length (ℓ)(mm) | 6 ～ 110 | 15 ～ 110 | 8 ～ 50 | 10 ～ 60 | 1.1 ～ 80 | 15 ～ 110 | 4 ～ 55 | 5 ～ 25 | 20 ～ 250 | 2.5 ～ 75 | 3.5 ～ 60 | 15 ～ 110 | 8 ～ 65 | 12 ～ 68 | 15 ～ 110 | 2.5 ～ 75 | 3.5 ～ 60 | 15 ～ 110 | 8 ～ 65 | 12 ～ 68 | 8 ～ 50 | 10 ～ 60 | 8 ～ 45 | 12 ～ 68 | - | - | - | - | 2 ～ 70 | 7 ～ 70 | 15 ～ 125 | 2 ～ 70 | 7 ～ 70 | 20 ～ 65 | 7 ～ 70 | 12 ～ 40 | 20 ～ 65 | 15 ～ 125 | 7 ～ 22 | 3 ～ 45 | 15 ～ 125 | 2 ～ 70 | 6 ～ 65 | 15 ～ 125 | 30 ～ 150 |
| Work Material | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[◎] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] |
| Flute Shape Type | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
| Number of Flutes(sheet) | 2 | 4 | 2 | 2 | 2 | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 4 | 4 | 4 | 2 | 2 | 2 | 4 | 4 | 2 | 2 | 4 | 4 | 2 | 2 | 4 | 4 | 2 | 4 | 2 | 2 | 4 | 4 | 4 | 4 | 2 | 4 | 2 | 2 | 4 | 2 | 3 | 4 | 2 |
| Tool Material Type | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel |
| Processing Applications | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting |
| Link Diameter (d)(mm) | 6 ～ 32 | 6 ～ 32 | 6 ～ 25 | 6 ～ 25 | 6 ～ 42 | 6 ～ 32 | 6 ～ 25 | 6 ～ 25 | 6 ～ 42 | 6 ～ 42 | 6 ～ 25 | 6 ～ 32 | 6 ～ 32 | 6 ～ 25 | 6 ～ 32 | 6 ～ 42 | 6 ～ 25 | 6 ～ 32 | 6 ～ 32 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 10 ～ 25 | 10 ～ 25 | 10 ～ 25 | 10 ～ 25 | 6 ～ 42 | 6 ～ 42 | 6 ～ 32 | 6 ～ 42 | 6 ～ 42 | 6 ～ 16 | 6 ～ 42 | 6 ～ 16 | 6 ～ 16 | 6 ～ 32 | 6 ～ 12 | 6 ～ 20 | 6 ～ 32 | 6 ～ 42 | 6 ～ 32 | 6 ～ 32 | 6 ～ 32 |
| Coating | Non-Coated | Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | AG | TiN | TiN | Non-Coated | Non-Coated | Non-Coated | AG | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiAlN | AG | TiN | TiN | TiN | Non-Coated |
| Overall Length (L)(mm) | 50 ～ 195 | 60 ～ 195 | 50 ～ 120 | 50 ～ 130 | 45 ～ 170 | 60 ～ 195 | 45 ～ 125 | 50 ～ 95 | 60 ～ 345 | 45 ～ 165 | 45 ～ 130 | 60 ～ 195 | 52 ～ 150 | 55 ～ 144 | 60 ～ 195 | 45 ～ 165 | 45 ～ 130 | 60 ～ 195 | 52 ～ 150 | 55 ～ 144 | 50 ～ 120 | 50 ～ 130 | 52 ～ 121 | 55 ～ 144 | 60 ～ 120 | 60 ～ 130 | 69 ～ 121 | 78 ～ 144 | 50 ～ 160 | 50 ～ 160 | 60 ～ 210 | 50 ～ 160 | 50 ～ 160 | 55 ～ 120 | 50 ～ 160 | 45 ～ 95 | 55 ～ 120 | 60 ～ 210 | 50 ～ 80 | 50 ～ 110 | 60 ～ 210 | 50 ～ 160 | 50 ～ 150 | 60 ～ 210 | 70 ～ 235 |
| Helix Angle (θ) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Weak Helix (15 to 25°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) |
| Base-Blade Availability | - | Included | Included | Included | - | - | - | - | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Length Under Neck (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Link | Straight | - | - | - | Straight | Straight | Straight | Straight | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | Straight |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Metric / Inch
- metric
-
Flute Diameter (D)(φ)
-
0.45～0.9
- 0.45
- 0.8
- 0.9
-
1～1.9
- 1
- 1/2
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.59
- 1.6
- 1.7
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.3
- 2.38
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.97
- 3
- 3/4
- 3.1
- 3.18
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
- 3.97
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.76
- 4.8
- 4.9
-
5～5.9
- 5
- 5/8
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.56
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.05
- 6.1
- 6.2
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.94
- 7
- 7/8
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
- 7.94
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.53
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.11
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.29
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.7
- 15.8
- 15.88
- 15.9
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.46
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.9
- 19
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.6
- 19.7
- 19.8
- 19.9
-
20～20.9
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.64
- 20.7
- 20.8
- 20.9
-
21～21.9
- 21
- 21.1
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.7
- 21.8
- 21.9
-
22～22.9
- 22
- 22.1
- 22.2
- 22.23
- 22.3
- 22.4
- 22.5
- 22.6
- 22.7
- 22.8
- 22.9
-
23～23.9
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.7
- 23.8
- 23.81
- 23.9
-
24～24.9
- 24
- 24.1
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.7
- 24.8
- 24.9
-
25～25.9
- 25
- 25.1
- 25.2
- 25.3
- 25.4
- 25.5
- 25.6
- 25.7
- 25.8
- 25.9
-
26～26.9
- 26
- 26.1
- 26.2
- 26.3
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
- 26.9
-
27～27.9
- 27
- 27.1
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.7
- 27.8
- 27.9
-
28～28.9
- 28
- 28.1
- 28.2
- 28.3
- 28.4
- 28.5
- 28.6
- 28.7
- 28.8
- 28.9
-
29～29.9
- 29
- 29.1
- 29.2
- 29.3
- 29.4
- 29.5
- 29.6
- 29.7
- 29.8
- 29.9
-
30～30.9
- 30
- 30.1
- 30.2
- 30.3
- 30.4
- 30.5
- 30.6
- 30.7
- 30.8
- 30.9
-
31～31.9
- 31
- 31.1
- 31.2
- 31.3
- 31.4
- 31.5
- 31.6
- 31.7
- 31.75
- 31.8
- 31.9
-
32～32.9
- 32
- 32.1
- 32.2
- 32.3
- 32.4
- 32.5
- 32.6
- 32.7
- 32.8
- 32.9
-
33～33.9
- 33
- 33.1
- 33.2
- 33.3
- 33.4
- 33.5
- 33.6
- 33.7
- 33.8
- 33.9
-
34～34.9
- 34
- 34.1
- 34.2
- 34.3
- 34.4
- 34.5
- 34.6
- 34.7
- 34.8
- 34.9
-
35～35.9
- 35
- 35.1
- 35.2
- 35.3
- 35.4
- 35.5
- 35.6
- 35.7
- 35.8
- 35.9
-
36～36.9
- 36
- 36.1
- 36.2
- 36.3
- 36.4
- 36.5
- 36.6
- 36.7
- 36.8
- 36.9
-
37～37.9
- 37
- 37.1
- 37.2
- 37.3
- 37.4
- 37.5
- 37.6
- 37.7
- 37.8
- 37.9
-
38～38.9
- 38
- 38.1
- 38.2
- 38.3
- 38.4
- 38.5
- 38.6
- 38.7
- 38.8
- 38.9
-
39～39.9
- 39
- 39.1
- 39.2
- 39.3
- 39.4
- 39.5
- 39.6
- 39.7
- 39.8
- 39.9
-
40～40.9
- 40
- 40.1
- 40.2
- 40.3
- 40.4
- 40.5
- 40.6
- 40.7
- 40.8
- 40.9
-
41～41.9
- 41
- 41.1
- 41.2
- 41.3
- 41.4
- 41.5
- 41.6
- 41.7
- 41.8
- 41.9
-
42～42.9
- 42
- 42.1
- 42.2
- 42.3
- 42.4
- 42.5
- 42.6
- 42.7
- 42.8
- 42.9
-
43～43.9
- 43
- 43.1
- 43.2
- 43.3
- 43.4
- 43.5
- 43.6
- 43.7
- 43.8
- 43.9
-
44～44.9
- 44
- 44.1
- 44.2
- 44.3
- 44.4
- 44.5
- 44.6
- 44.7
- 44.8
- 44.9
-
45～45.5
- 45
- 45.5
-
46～46.5
- 46
- 46.5
-
47～47.5
- 47
- 47.5
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
85
-
90
-
95
-
100
[2.7-2.99/0.01φ Unit(s)][3.15-3.5/0.01φ Unit(s)][3.6-4/0.01φ Unit(s)][4.05-14.99/0.01φ Unit(s)][15.01-16/0.01φ Unit(s)][17-18.99/0.01φ Unit(s)][19.01-19.99/0.01φ Unit(s)][20.01-22.99/0.01φ Unit(s)][24-25/0.01φ Unit(s)]
-
-
Flute Length (ℓ)(mm)
-
Work Material
-
Flute Shape Type
- Square
- For Key Grooves
-
Number of Flutes(sheet)
-
Tool Material Type
-
Processing Applications
-
Link Diameter (d)(mm)
-
Coating
-
Overall Length (L)(mm)
-
Helix Angle (θ)
-
Base-Blade Availability
-
Length Under Neck (ℓ1)(mm)
-
Link
Narrow search by specifying Manufacturer
-
- OSG (24)
- Nachi-Fujikoshi (16)
- S&K (14)
- EIKOSHA (2)
- FUKUDA (0)
- ESCO (0)
- TAIYO TOOL (0)
- ASAHI TOOLS (0)
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy