(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
HSS Square End Mill（Coating：Non-Coated）
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
OSG
Heavy Cutting and Roughing End Mill Long Blade Series
- Volume Discount
Days to Ship: 8 Days or more -
- On Sale Till 07/03/2025
Nachi-Fujikoshi
A general-purpose end mill that can process anything from steel to stainless steel and aluminum.
- Volume Discount
Special Price Days to Ship: Same day or more Show Stock Products
-
2-Flute, General-Purpose, Long Type EDL
OSG
Non-coated, 30° torsion.
For complete product overview and details on 2-Flute, General-Purpose, Long Type EDL see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
3S End Mill, 2-Flute Extra Long Blade
FUKUDA
Long blade for deep grooving such as die engraving and wide carving Abundant variety of sizes
- Volume Discount
Days to Ship: 8 Days or more -
S&K
A hard pitch type roughing end mill. Ideal for heavy duty groove cutting.
- Volume Discount
Days to Ship: 8 Days or more -
Ultra Long End Mill with 4 Flutes EXLE4
EIKOSHA
[Features]
· It is a ultra-long 4-flute type with 45° high torsion angle.- Volume Discount
Days to Ship: 8 Days or more -
End Mill (Roughing Medium Type) EX-REEN
OSG
Heavy Cutting and Roughing End Mill Medium Blade Series
- Volume Discount
Days to Ship: 8 Days or more -
Nachi-Fujikoshi
A general-purpose end mill that can process anything from steel to stainless steel and aluminum. Suitable for side surface machining.
- Volume Discount
Days to Ship: 8 Days or more -
2-Flute, General-Purpose, Short Type EDS
OSG
HSS square series.
For complete product overview and details on 2-Flute, General-Purpose, Short Type EDS see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
End Mill (3-Flute General Purpose Short Type) ETS
OSG
HSS square series.
For complete product overview and details on End Mill (3-Flute General Purpose Short Type) ETS see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
XPM End Mill (2-Flute Medium Type) XPM-EDN
OSG
Blade length is set somewhere between long and short
- Volume Discount
Days to Ship: 8 Days or more -
OSG
Heavy Cutting and Roughing End Mill Short Blade Series
- Volume Discount
Days to Ship: 8 Days or more -
3S End Mill, 2-Flute (Standard Blade)
FUKUDA
Wide range of blade lengths and an abundance of sizes
- Volume Discount
Days to Ship: 8 Days or more -
3S End Mill, 4-Flute (Standard Blade)
FUKUDA
Side cutting and groove re-polishing are easy
- Volume Discount
Days to Ship: 8 Days or more -
LVS4T 4-Flute Blade Long Blade
S&K
A 4-flute end mill for finish machining. Enables a wide range of side machining and deep engraving, due to the long flute length.
- Volume Discount
Days to Ship: 8 Days or more -
Days to Ship: 8 Days or more -
Powdered High-Speed Steel Roughing End Mill, Short, Center Cut/Non-Coated Model
MISUMI
4 types that can be selected from the short to long shank according to the workpiece
- Volume Discount
- Non-Coated
- 4 Flutes
- S (Short)
Days to Ship: 8 Days or more -
Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut/Non-Coated Model
MISUMI
4 types that can be selected from the short to long shank according to the workpiece
- Volume Discount
- Non-Coated
- 4 Flutes
- R (Regular)
Days to Ship: 8 Days or more -
Powdered High-Speed Steel Roughing End Mill, Long, Center Cut/Non-Coated Model
MISUMI
4 types that can be selected from the short to long shank according to the workpiece
- Volume Discount
- Non-Coated
- 4 Flutes
- L (Long)
Days to Ship: 8 Days or more -
Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut/Non-Coated Model
MISUMI
4 types that can be selected from the short to long shank according to the workpiece
- Volume Discount
- Non-Coated
- 3 Flutes
- S (Short)
Days to Ship: 8 Days or more -
High-Speed Steel Roughing End Mill, Short, Center Cut/Non-Coated Model
MISUMI
A lineup of short to long with the pitch width that's ideal for roughing
- Volume Discount
- Non-Coated
- 4 Flutes
- S (Short)
Days to Ship: 8 Days or more -
High-Speed Steel Roughing End Mill, Regular, Center Cut/Non-Coated Model
MISUMI
A lineup of short to long with the pitch width that's ideal for roughing
- Volume Discount
- Non-Coated
- 4 Flutes
- R (Regular)
Days to Ship: 8 Days or more -
High-Speed Steel Roughing End Mill, Long, Center Cut/Non-Coated Model
MISUMI
A lineup of short to long with the pitch width that's ideal for roughing
- Volume Discount
- Non-Coated
- 4 Flutes
- L (Long)
Days to Ship: 8 Days or more -
High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut/Non-Coated Model
MISUMI
A lineup of short to long with the pitch width that's ideal for roughing
- Volume Discount
- Non-Coated
- 3 Flutes
- S (Short)
Days to Ship: 8 Days or more -
Powdered High-Speed Steel Square End Mill, 2-Flute, Short/Non-Coated Model
MISUMI
A lineup of powdered high speed steel non-coated type from short to long
- Volume Discount
- Non-Coated
- 2 Flutes
- S (Short)
Days to Ship: 8 Days or more -
Powdered High-Speed Steel Square End Mill, 2-Flute/Regular/Non-Coated Model
MISUMI
A lineup of powdered high speed steel non-coated type from short to long
- Volume Discount
- Non-Coated
- 2 Flutes
- R (Regular)
Days to Ship: 8 Days or more -
Powdered High-Speed Steel Square End Mill, 2-Flute, Long/Non-Coated Model
MISUMI
A lineup of powdered high speed steel non-coated type from short to long
- Volume Discount
- Non-Coated
- 2 Flutes
- L (Long)
Days to Ship: 8 Days or more -
Powdered High-Speed Steel Square End Mill, 4-Flute/Short/Non-Coated Model
MISUMI
Powdered high-speed steel and non-coated 4-blade series
- Volume Discount
- Non-Coated
- 4 Flutes
- S (Short)
Days to Ship: 8 Days or more -
Powdered High-Speed Steel Square End Mill, 4-Flute/Regular/Non-Coated Model
MISUMI
Powdered high-speed steel and non-coated 4-blade series
- Volume Discount
- Non-Coated
- 4 Flutes
- R (Regular)
Days to Ship: 8 Days or more -
Powdered High-Speed Steel Square End Mill, 4-Flute/Regular/Non-Coated Model, Long
MISUMI
Powdered high-speed steel and non-coated 4-blade series
- Volume Discount
- Non-Coated
- 4 Flutes
- L (Long)
Days to Ship: 8 Days or more -
High-Speed Steel Square End Mill, 2-Flute/Short/Non-Coated Model
MISUMI
The non-coated 2-blade type is available from φ1 up to φ50
- Volume Discount
- Non-Coated
- 2 Flutes
- S (Short)
Days to Ship: 8 Days or more -
High-Speed Steel Square End Mill, 2-Flute/Regular/Non-Coated Model
MISUMI
The non-coated 2-blade type is available from φ1 up to φ50
- Volume Discount
- Non-Coated
- 2 Flutes
- R (Regular)
Days to Ship: 8 Days or more -
High-Speed Steel Square End Mill, 2-Flute/Long/Non-Coated Model
MISUMI
The non-coated 2-blade type is available from φ1 up to φ50
- Volume Discount
- Non-Coated
- 2 Flutes
- L (Long)
Days to Ship: 8 Days or more -
High-Speed Steel Square End Mill, 4-Flute, Short/Non-Coated Model
MISUMI
40° helix that's stronger than the 2-blade type is ideal for side milling
- Volume Discount
- Non-Coated
- 4 Flutes
- S (Short)
Days to Ship: 8 Days or more -
High-Speed Steel Square End Mill, 4-Flute, Regular/Non-Coated Model
MISUMI
40° helix that's stronger than the 2-blade type is ideal for side milling
- Volume Discount
- Non-Coated
- 4 Flutes
- R (Regular)
Days to Ship: 8 Days or more -
High-Speed Steel Square End Mill, 4-Flute, Long/Non-Coated Model
MISUMI
40° helix that's stronger than the 2-blade type is ideal for side milling
- Volume Discount
- Non-Coated
- 4 Flutes
- L (Long)
Days to Ship: 8 Days or more -
High-Speed Steel Corner C End Mill, 2-Flute/Short Model
MISUMI
End mill series with the C surface that can be selected in 0.1 mm increments
- Non-Coated
- 2 Flutes
- S (Short)
Days to Ship: 10 Days or more -
High-Speed Steel Corner C End Mill, 2-Flute/Regular Model
MISUMI
End mill series with the C surface that can be selected in 0.1 mm increments
- Non-Coated
- 2 Flutes
- R (Regular)
Days to Ship: 10 Days or more -
High-Speed Steel Corner C End Mill, 4-Flute/Short Model
MISUMI
End mill series with the C surface that can be selected in 0.1 mm increments
- Non-Coated
- 4 Flutes
- S (Short)
Days to Ship: 10 Days or more -
High-Speed Steel Corner C End Mill, 4-Flute/Regular Model
MISUMI
End mill series with the C surface that can be selected in 0.1 mm increments
- Non-Coated
- 4 Flutes
- R (Regular)
Days to Ship: 10 Days or more -
High-Speed Steel Blade Relief End Mill, 2-Flute/Short Model
MISUMI
A blade relief type end mill that's not affected by the interference of tools
- Non-Coated
- 2 Flutes
- S (Short)
Days to Ship: 10 Days or more -
High-Speed Steel Blade Relief End Mill, 2-Flute/Regular Model
MISUMI
A blade relief type end mill that's not affected by the interference of tools
- Non-Coated
- 2 Flutes
- R (Regular)
Days to Ship: 10 Days or more -
High-Speed Steel Blade Relief End Mill, 4-Flute/Short Model
MISUMI
A blade relief type end mill that's not affected by the interference of tools
- Non-Coated
- 4 Flutes
- S (Short)
Days to Ship: 10 Days or more -
High-Speed Steel Blade Relief End Mill, 4-Flute/Regular Model
MISUMI
A blade relief type end mill that's not affected by the interference of tools
- Non-Coated
- 4 Flutes
- R (Regular)
Days to Ship: 10 Days or more -
High-Speed Steel 0.01mm Unit Outer Diameter Designated End Mill, 2-Flute/Short
MISUMI
Can be freely selected in 0.01 mm increments while being affordable
- Non-Coated
- 2 Flutes
- S (Short)
Days to Ship: 10 Days or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Specifications |
| Flute Diameter (D)(φ) |
| Flute Length (ℓ)(mm) |
| Work Material |
| Flute Shape Type |
| Number of Flutes(sheet) |
| Tool Material Type |
| Processing Applications |
| Link Diameter (d)(mm) |
| Coating |
| Overall Length (L)(mm) |
| Helix Angle (θ) |
| Base-Blade Availability |
| Length Under Neck (ℓ1)(mm) |
| Link |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | Nachi-Fujikoshi | OSG | FUKUDA | S&K | EIKOSHA | OSG | Nachi-Fujikoshi | OSG | OSG | OSG | OSG | FUKUDA | FUKUDA | S&K | S&K | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | Powdered High-Speed Steel Roughing End Mill, Short, Center Cut/Non-Coated Model | Powdered High-Speed Steel Roughing End Mill, Regular, Center Cut/Non-Coated Model | Powdered High-Speed Steel Roughing End Mill, Long, Center Cut/Non-Coated Model | Powdered High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut/Non-Coated Model | High-Speed Steel Roughing End Mill, Short, Center Cut/Non-Coated Model | High-Speed Steel Roughing End Mill, Regular, Center Cut/Non-Coated Model | High-Speed Steel Roughing End Mill, Long, Center Cut/Non-Coated Model | High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut/Non-Coated Model | Powdered High-Speed Steel Square End Mill, 2-Flute, Short/Non-Coated Model | Powdered High-Speed Steel Square End Mill, 2-Flute/Regular/Non-Coated Model | Powdered High-Speed Steel Square End Mill, 2-Flute, Long/Non-Coated Model | Powdered High-Speed Steel Square End Mill, 4-Flute/Short/Non-Coated Model | Powdered High-Speed Steel Square End Mill, 4-Flute/Regular/Non-Coated Model | Powdered High-Speed Steel Square End Mill, 4-Flute/Regular/Non-Coated Model, Long | High-Speed Steel Square End Mill, 2-Flute/Short/Non-Coated Model | High-Speed Steel Square End Mill, 2-Flute/Regular/Non-Coated Model | High-Speed Steel Square End Mill, 2-Flute/Long/Non-Coated Model | High-Speed Steel Square End Mill, 4-Flute, Short/Non-Coated Model | High-Speed Steel Square End Mill, 4-Flute, Regular/Non-Coated Model | High-Speed Steel Square End Mill, 4-Flute, Long/Non-Coated Model | High-Speed Steel Blade Relief End Mill, 2-Flute/Regular Model | High-Speed Steel Blade Relief End Mill, 4-Flute/Regular Model | High-Speed Steel 0.01mm Unit Outer Diameter Designated End Mill, 2-Flute/Short | ||||||||||||||||||||||
| Days to Ship | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||
| Flute Diameter (D)(φ) | 6 ～ 50 | 1 ～ 50 | 0.8 ～ 40 | 0.8 ～ 60 | 9.5 | 20 ～ 50 | 6 ～ 50 | 3.5 ～ 50 | 0.45 ～ 60 | 1 ～ 30 | 1 ～ 20 | 6 ～ 50 | 0.8 ～ 100 | 3 ～ 100 | 3 ～ 32 | 2 ～ 26 | 5 ～ 30 | 6 ～ 30 | 10 ～ 25 | 6 ～ 30 | 5 ～ 50 | 6 ～ 50 | 10 ～ 50 | 6 ～ 30 | 1 ～ 40 | 1 ～ 25 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 1 ～ 50 | 1 ～ 25 | 3 ～ 40 | 3 ～ 40 | 3 ～ 30 | 3 ～ 40 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 8 ～ 25 | 8 ～ 25 | 8 ～ 25 | 8 ～ 25 | 2.7 ～ 25 |
| Flute Length (ℓ)(mm) | 24 ～ 150 | 2 ～ 70 | 6 ～ 110 | 2.5 ～ 300 | 15 | 100 ～ 250 | 16 ～ 112 | 12 ～ 70 | 1.1 ～ 80 | 2.5 ～ 55 | 3.5 ～ 45 | 13 ～ 75 | 2 ～ 80 | 13 ～ 80 | 30 ～ 200 | 10 ～ 50 | 13 ～ 45 | 19 ～ 68 | 45 ～ 90 | 11 ～ 45 | 13 ～ 75 | 19 ～ 112 | 45 ～ 150 | 11 ～ 45 | 2.5 ～ 65 | 3.5 ～ 60 | 15 ～ 90 | 8 ～ 45 | 12 ～ 68 | 15 ～ 90 | 2.5 ～ 75 | 3.5 ～ 60 | 15 ～ 110 | 8 ～ 65 | 12 ～ 68 | 15 ～ 110 | 8 ～ 50 | 10 ～ 60 | 8 ～ 45 | 12 ～ 68 | - | - | - | - | 8 ～ 50 |
| Work Material | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Cast Iron[○] / Aluminum[○] / Resin[○] / Others[○] / Others 2[○] / Others 3[○] / Others 4[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Aluminum[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Cast Iron[○] / Aluminum[○] / Resin[○] / Others[○] / Others 2[○] / Others 3[○] / Others 4[○] | Cast Iron[○] / Aluminum[○] / Resin[○] / Others[○] / Others 2[○] / Others 3[○] / Others 4[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Heat-Treated Steel[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] |
| Flute Shape Type | Roughing | Square | Square | Square | Roughing | Square | Roughing | Square | Square | Square | Square | Roughing | Square | Square | Square | Square | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
| Number of Flutes(sheet) | 4 ～ 6 | 2 | 2 | 2 | 4 | 4 | 4 ～ 6 | 4 | 2 | 3 | 2 | 4 ～ 6 | 2 | 4 | 4 | 2 | 3 ～ 5 | 3 ～ 5 | 4 | 3 ～ 4 | 3 ～ 6 | 3 ～ 6 | 4 ～ 6 | 3 ～ 4 | 2 | 2 | 2 | 4 | 4 | 4 | 2 | 2 | 2 | 4 | 4 | 4 | 2 | 2 | 4 | 4 | 2 | 2 | 4 | 4 | 2 |
| Tool Material Type | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Alloy High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Powdered High-Speed Steel | Cobalt High-Speed Steel | Alloy High-Speed Steel | Alloy High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Powdered High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel |
| Processing Applications | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove / Thrust (Z-Feed) | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk |
| Link Diameter (d)(mm) | 6 ～ 42 | 6 ～ 42 | 6 ～ 32 | 6 ～ 42 | 10 | 20 ～ 42 | 6 ～ 42 | 8 ～ 42 | 6 ～ 42 | 6 ～ 25 | 6 ～ 20 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 32 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 10 ～ 25 | 6 ～ 25 | 6 ～ 42 | 6 ～ 42 | 10 ～ 42 | 6 ～ 25 | 6 ～ 32 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 42 | 6 ～ 25 | 6 ～ 32 | 6 ～ 32 | 6 ～ 25 | 6 ～ 32 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 10 ～ 25 | 10 ～ 25 | 10 ～ 25 | 10 ～ 25 | 6 ～ 25 |
| Coating | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated |
| Overall Length (L)(mm) | 68 ～ 252 | 50 ～ 160 | 50 ～ 195 | 42 ～ 400 | 75 | 180 ～ 350 | 60 ～ 214 | 60 ～ 160 | 45 ～ 170 | 45 ～ 125 | 55 ～ 125 | 57 ～ 177 | 42 ～ 180 | 51 ～ 180 | 70 ～ 275 | 60 ～ 150 | 57 ～ 121 | 63 ～ 144 | 95 ～ 166 | 80 ～ 160 | 57 ～ 177 | 63 ～ 214 | 95 ～ 252 | 80 ～ 160 | 45 ～ 150 | 45 ～ 130 | 60 ～ 160 | 52 ～ 121 | 55 ～ 144 | 60 ～ 160 | 45 ～ 165 | 45 ～ 130 | 60 ～ 195 | 52 ～ 150 | 55 ～ 144 | 60 ～ 195 | 50 ～ 120 | 50 ～ 130 | 52 ～ 121 | 55 ～ 144 | 60 ～ 120 | 60 ～ 130 | 69 ～ 121 | 78 ～ 144 | 50 ～ 120 |
| Helix Angle (θ) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Without Torsion | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) |
| Base-Blade Availability | - | - | - | Included | Included | Included | - | - | - | - | - | - | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included |
| Length Under Neck (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Link | Straight | - | Straight | - | - | - | Straight | - | Straight | Straight | Straight | Straight | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Metric / Inch
- metric
-
Flute Diameter (D)(φ)
-
0.45～0.9
- 0.45
- 0.8
- 0.9
-
1～1.9
- 1
- 1/2
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.59
- 1.6
- 1.7
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.3
- 2.38
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.97
- 3
- 3/4
- 3.1
- 3.18
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
- 3.97
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.76
- 4.8
- 4.9
-
5～5.9
- 5
- 5/8
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.56
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.05
- 6.1
- 6.2
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.94
- 7
- 7/8
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
- 7.94
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.53
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.11
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.29
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.7
- 15.8
- 15.88
- 15.9
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.46
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.9
- 19
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.6
- 19.7
- 19.8
- 19.9
-
20～20.9
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.64
- 20.7
- 20.8
- 20.9
-
21～21.9
- 21
- 21.1
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.7
- 21.8
- 21.9
-
22～22.9
- 22
- 22.1
- 22.2
- 22.23
- 22.3
- 22.4
- 22.5
- 22.6
- 22.7
- 22.8
- 22.9
-
23～23.9
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.7
- 23.8
- 23.81
- 23.9
-
24～24.9
- 24
- 24.1
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.7
- 24.8
- 24.9
-
25～25.9
- 25
- 25.1
- 25.2
- 25.3
- 25.4
- 25.5
- 25.6
- 25.7
- 25.8
- 25.9
-
26～26.9
- 26
- 26.1
- 26.2
- 26.3
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
- 26.9
-
27～27.9
- 27
- 27.1
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.7
- 27.8
- 27.9
-
28～28.9
- 28
- 28.1
- 28.2
- 28.3
- 28.4
- 28.5
- 28.6
- 28.7
- 28.8
- 28.9
-
29～29.9
- 29
- 29.1
- 29.2
- 29.3
- 29.4
- 29.5
- 29.6
- 29.7
- 29.8
- 29.9
-
30～30.9
- 30
- 30.1
- 30.2
- 30.3
- 30.4
- 30.5
- 30.6
- 30.7
- 30.8
- 30.9
-
31～31.9
- 31
- 31.1
- 31.2
- 31.3
- 31.4
- 31.5
- 31.6
- 31.7
- 31.75
- 31.8
- 31.9
-
32～32.9
- 32
- 32.1
- 32.2
- 32.3
- 32.4
- 32.5
- 32.6
- 32.7
- 32.8
- 32.9
-
33～33.9
- 33
- 33.1
- 33.2
- 33.3
- 33.4
- 33.5
- 33.6
- 33.7
- 33.8
- 33.9
-
34～34.9
- 34
- 34.1
- 34.2
- 34.3
- 34.4
- 34.5
- 34.6
- 34.7
- 34.8
- 34.9
-
35～35.9
- 35
- 35.1
- 35.2
- 35.3
- 35.4
- 35.5
- 35.6
- 35.7
- 35.8
- 35.9
-
36～36.9
- 36
- 36.1
- 36.2
- 36.3
- 36.4
- 36.5
- 36.6
- 36.7
- 36.8
- 36.9
-
37～37.9
- 37
- 37.1
- 37.2
- 37.3
- 37.4
- 37.5
- 37.6
- 37.7
- 37.8
- 37.9
-
38～38.9
- 38
- 38.1
- 38.2
- 38.3
- 38.4
- 38.5
- 38.6
- 38.7
- 38.8
- 38.9
-
39～39.9
- 39
- 39.1
- 39.2
- 39.3
- 39.4
- 39.5
- 39.6
- 39.7
- 39.8
- 39.9
-
40～40.9
- 40
- 40.1
- 40.2
- 40.3
- 40.4
- 40.5
- 40.6
- 40.7
- 40.8
- 40.9
-
41～41.9
- 41
- 41.1
- 41.2
- 41.3
- 41.4
- 41.5
- 41.6
- 41.7
- 41.8
- 41.9
-
42～42.9
- 42
- 42.1
- 42.2
- 42.3
- 42.4
- 42.5
- 42.6
- 42.7
- 42.8
- 42.9
-
43～43.9
- 43
- 43.1
- 43.2
- 43.3
- 43.4
- 43.5
- 43.6
- 43.7
- 43.8
- 43.9
-
44～44.9
- 44
- 44.1
- 44.2
- 44.3
- 44.4
- 44.5
- 44.6
- 44.7
- 44.8
- 44.9
-
45～45.5
- 45
- 45.5
-
46～46.5
- 46
- 46.5
-
47～47.5
- 47
- 47.5
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
85
-
90
-
95
-
100
[2.7-2.99/0.01φ Unit(s)][3.15-3.5/0.01φ Unit(s)][3.6-4/0.01φ Unit(s)][4.05-14.99/0.01φ Unit(s)][15.01-16/0.01φ Unit(s)][17-18.99/0.01φ Unit(s)][19.01-19.99/0.01φ Unit(s)][20.01-22.99/0.01φ Unit(s)][24-25/0.01φ Unit(s)]
-
-
Flute Length (ℓ)(mm)
-
Work Material
-
Flute Shape Type
- Square
- Roughing
- For Key Grooves
-
Number of Flutes(sheet)
-
Tool Material Type
-
Processing Applications
-
Link Diameter (d)(mm)
-
Coating
-
Overall Length (L)(mm)
-
Helix Angle (θ)
-
Base-Blade Availability
-
Length Under Neck (ℓ1)(mm)
-
Link
Narrow search by specifying Manufacturer
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy