(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
HSS Square End Mill（Tool Material Type：Cobalt High-Speed Steel）
Search by specifying the lower class category
| Days to Ship |
|
|---|
-
Tuf-Nick Gold End Mill (Short Type) TFGS
OSG
HSS roughing and semi-finishing series.
- Volume Discount
Days to Ship: 8 Days or more -
High-Speed Steel Square End Mill, 4-Flute, Long/Non-Coated Model
MISUMI
40° helix that's stronger than the 2-blade type is ideal for side milling
- Volume Discount
- Non-Coated
- 4 Flutes
- L (Long)
Days to Ship: 8 Days or more -
Nachi-Fujikoshi
A general-purpose end mill that can process anything from steel to stainless steel and aluminum. Suitable for side surface machining.
- Volume Discount
Days to Ship: 8 Days or more -
Nachi-Fujikoshi
Capable of roughing of materials from steel to stainless steel and aluminum. The notches have a large pitch.
- Volume Discount
Days to Ship: 8 Days or more -
2-Flute, General-Purpose, Short Type EDS
OSG
HSS square series.
For complete product overview and details on 2-Flute, General-Purpose, Short Type EDS see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Short Fine Pitch Type EX-TIN-RESF
OSG
Roughing end mill short blade series with TiN coating for heavy cutting.
- Volume Discount
Days to Ship: 8 Days or more -
TiN Coating, End Mill (Roughing Medium, Fine-Pitch Type) EX-TIN-RENF
OSG
Roughing end mill medium blade series with TiN coating for heavy cutting.
- Volume Discount
Days to Ship: 8 Days or more -
TiN Coating, End Mill (Roughing Long, Fine-Pitch Type) EX-TIN-RELF
OSG
Roughing and extra-long for HSS rough machining.
- Volume Discount
Days to Ship: 8 Days or more -
S-SUSα S Coated End Mill for Stainless Steel Groove Processing
S&K
Flat nick type roughing endmill with TiCN coating. Ideal for grooving of stainless steel.
- Volume Discount
Days to Ship: 8 Days or more -
High-Speed Steel Blade Relief End Mill, 2-Flute/Regular Model
MISUMI
A blade relief type end mill that's not affected by the interference of tools
- Non-Coated
- 2 Flutes
- R (Regular)
Days to Ship: 10 Days or more -
Nachi-Fujikoshi
A general-purpose end mill that can process anything from steel to stainless steel and aluminum.
- Volume Discount
Days to Ship: Same day or more Show Stock Products
-
2-Flute, General-Purpose, Long Type EDL
OSG
Non-coated, 30° torsion.
For complete product overview and details on 2-Flute, General-Purpose, Long Type EDL see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
OSG
The roughing and finishing end mill features a unique trapezoid blade shape derived from consideration for finishing cutting as well as heavy cutting. Nick perpendicular to shaft which withstands heavy cutting and boasts great blade tip strength.
- Volume Discount
Days to Ship: 8 Days or more -
OSG
Heavy Cutting and Roughing End Mill Long Blade Series
- Volume Discount
Days to Ship: 8 Days or more -
OSG
For Key Groove (OL1)
For complete product overview and details on For 2-Flute Keyway EKD (OL1) see the sections below:- Volume Discount
Days to Ship: 8 Days or more -
Days to Ship: 6 Days or more -
LVS2T 2-Flute Blade Long Blade
S&K
A 2-flute end mill for finish machining. Enables a wide range of side machining and deep engraving, due to the long flute length.
- Volume Discount
Days to Ship: 8 Days or more -
P-XαM P Coated X α Nick Regular Blade
S&K
[Features]
· A semi-fine pitch type P-XαS roughing end mill.
· Excellent chip discharge.
· Enables a wide range of machining applications, due to the regular flute.- Volume Discount
Days to Ship: 10 Days or more -
AG Mill, Roughing, Long Shank, SX/SLX Type AGREX/AGREU
Nachi-Fujikoshi
Capable of high-efficiency roughing of materials from steel to stainless steel and aluminum. The notches have a fine pitch.
- Volume Discount
Days to Ship: 8 Days or more -
AS Coated High-Speed Steel Roughing End Mill, Short, Center Cut
MISUMI
High-speed steel roughing end mill that achieves both the machining performance and low price
- Volume Discount
- AS
- 4 Flutes
- S (Short)
Days to Ship: 8 Days or more -
AS Coated High-Speed Steel Roughing End Mill, Regular, Center Cut
MISUMI
High-speed steel roughing end mill that achieves both the machining performance and low price
- Volume Discount
- AS
- 4 Flutes
- R (Regular)
Days to Ship: 8 Days or more -
AS Coated High-Speed Steel Roughing End Mill, Long, Center Cut
MISUMI
High-speed steel roughing end mill that achieves both the machining performance and low price
- Volume Discount
- AS
- 4 Flutes
- L (Long)
Days to Ship: 8 Days or more -
AS Coated High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut
MISUMI
High-speed steel roughing end mill that achieves both the machining performance and low price
- Volume Discount
- AS
- 3 Flutes
- S (Short)
Days to Ship: 8 Days or more -
High-Speed Steel Roughing End Mill, Short, Center Cut/Non-Coated Model
MISUMI
A lineup of short to long with the pitch width that's ideal for roughing
- Volume Discount
- Non-Coated
- 4 Flutes
- S (Short)
Days to Ship: 8 Days or more -
High-Speed Steel Roughing End Mill, Regular, Center Cut/Non-Coated Model
MISUMI
A lineup of short to long with the pitch width that's ideal for roughing
- Volume Discount
- Non-Coated
- 4 Flutes
- R (Regular)
Days to Ship: 8 Days or more -
High-Speed Steel Roughing End Mill, Long, Center Cut/Non-Coated Model
MISUMI
A lineup of short to long with the pitch width that's ideal for roughing
- Volume Discount
- Non-Coated
- 4 Flutes
- L (Long)
Days to Ship: 8 Days or more -
High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut/Non-Coated Model
MISUMI
A lineup of short to long with the pitch width that's ideal for roughing
- Volume Discount
- Non-Coated
- 3 Flutes
- S (Short)
Days to Ship: 8 Days or more -
TiAlN Coated High-Speed Steel Roughing End Mill, Short, Center Cut
MISUMI
HSS coated product that has achieved the unparalleled low price [C-Value]
- Volume Discount
- TiAlN
- S (Short)
Days to Ship: Same day or more Show Stock Products
-
AS Coated High-Speed Steel Square End Mill, 2-Flute, Short
MISUMI
AS coating that provides improved processing efficiency in high-speed steel end mill
- Volume Discount
- AS
- 2 Flutes
- S (Short)
Days to Ship: 8 Days or more -
AS Coated High-Speed Steel Square End Mill, 2-Flute/Regular
MISUMI
AS coating that provides improved processing efficiency in high-speed steel end mill
- Volume Discount
- AS
- 2 Flutes
- R (Regular)
Days to Ship: 8 Days or more -
AS Coated High-Speed Steel Square End Mill, 2-Flute/Long
MISUMI
AS coating that provides improved processing efficiency in high-speed steel end mill
- Volume Discount
- AS
- 2 Flutes
- L (Long)
Days to Ship: 8 Days or more -
AS Coated High-Speed Steel Square End Mill, 4-Flute/Short
MISUMI
The durability has been remarkably improved with the superior heat resistance and film hardness of the AS coating over conventional products
- Volume Discount
- AS
- 4 Flutes
- S (Short)
Days to Ship: 8 Days or more -
AS Coated High-Speed Steel Square End Mill, 4-Flute/Regular
MISUMI
The durability has been remarkably improved with the superior heat resistance and film hardness of the AS coating over conventional products
- Volume Discount
- AS
- 4 Flutes
- R (Regular)
Days to Ship: 8 Days or more -
AS Coated High-Speed Steel Square End Mill, 4-Flute/Long
MISUMI
The durability has been remarkably improved with the superior heat resistance and film hardness of the AS coating over conventional products
- Volume Discount
- AS
- 4 Flutes
- L (Long)
Days to Ship: 8 Days or more -
High-Speed Steel Square End Mill, 2-Flute/Short/Non-Coated Model
MISUMI
The non-coated 2-blade type is available from φ1 up to φ50
- Volume Discount
- Non-Coated
- 2 Flutes
- S (Short)
Days to Ship: 8 Days or more -
High-Speed Steel Square End Mill, 2-Flute/Regular/Non-Coated Model
MISUMI
The non-coated 2-blade type is available from φ1 up to φ50
- Volume Discount
- Non-Coated
- 2 Flutes
- R (Regular)
Days to Ship: 8 Days or more -
High-Speed Steel Square End Mill, 2-Flute/Long/Non-Coated Model
MISUMI
The non-coated 2-blade type is available from φ1 up to φ50
- Volume Discount
- Non-Coated
- 2 Flutes
- L (Long)
Days to Ship: 8 Days or more -
High-Speed Steel Square End Mill, 4-Flute, Short/Non-Coated Model
MISUMI
40° helix that's stronger than the 2-blade type is ideal for side milling
- Volume Discount
- Non-Coated
- 4 Flutes
- S (Short)
Days to Ship: 8 Days or more -
High-Speed Steel Square End Mill, 4-Flute, Regular/Non-Coated Model
MISUMI
40° helix that's stronger than the 2-blade type is ideal for side milling
- Volume Discount
- Non-Coated
- 4 Flutes
- R (Regular)
Days to Ship: 8 Days or more -
High-Speed Steel Corner C End Mill, 2-Flute/Short Model
MISUMI
End mill series with the C surface that can be selected in 0.1 mm increments
- Non-Coated
- 2 Flutes
- S (Short)
Days to Ship: 10 Days or more -
High-Speed Steel Corner C End Mill, 2-Flute/Regular Model
MISUMI
End mill series with the C surface that can be selected in 0.1 mm increments
- Non-Coated
- 2 Flutes
- R (Regular)
Days to Ship: 10 Days or more -
High-Speed Steel Corner C End Mill, 4-Flute/Short Model
MISUMI
End mill series with the C surface that can be selected in 0.1 mm increments
- Non-Coated
- 4 Flutes
- S (Short)
Days to Ship: 10 Days or more -
High-Speed Steel Corner C End Mill, 4-Flute/Regular Model
MISUMI
End mill series with the C surface that can be selected in 0.1 mm increments
- Non-Coated
- 4 Flutes
- R (Regular)
Days to Ship: 10 Days or more -
High-Speed Steel Blade Relief End Mill, 2-Flute/Short Model
MISUMI
A blade relief type end mill that's not affected by the interference of tools
- Non-Coated
- 2 Flutes
- S (Short)
Days to Ship: 10 Days or more -
High-Speed Steel Blade Relief End Mill, 4-Flute/Short Model
MISUMI
A blade relief type end mill that's not affected by the interference of tools
- Non-Coated
- 4 Flutes
- S (Short)
Days to Ship: 10 Days or more
| Brand |
|---|
| Product Series |
| Days to Ship |
| Specifications |
| Flute Diameter (D)(φ) |
| Flute Length (ℓ)(mm) |
| Work Material |
| Flute Shape Type |
| Number of Flutes(sheet) |
| Tool Material Type |
| Processing Applications |
| Link Diameter (d)(mm) |
| Coating |
| Overall Length (L)(mm) |
| Helix Angle (θ) |
| Base-Blade Availability |
| Length Under Neck (ℓ1)(mm) |
| Link |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Brand | OSG | MISUMI | Nachi-Fujikoshi | Nachi-Fujikoshi | OSG | OSG | OSG | OSG | S&K | MISUMI | Nachi-Fujikoshi | OSG | OSG | OSG | OSG | S&K | S&K | S&K | Nachi-Fujikoshi | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
| Product Series | High-Speed Steel Square End Mill, 4-Flute, Long/Non-Coated Model | TiN Coating, End Mill (Roughing Medium, Fine-Pitch Type) EX-TIN-RENF | TiN Coating, End Mill (Roughing Long, Fine-Pitch Type) EX-TIN-RELF | S-SUSα S Coated End Mill for Stainless Steel Groove Processing | High-Speed Steel Blade Relief End Mill, 2-Flute/Regular Model | AS Coated High-Speed Steel Roughing End Mill, Short, Center Cut | AS Coated High-Speed Steel Roughing End Mill, Regular, Center Cut | AS Coated High-Speed Steel Roughing End Mill, Long, Center Cut | AS Coated High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut | High-Speed Steel Roughing End Mill, Short, Center Cut/Non-Coated Model | High-Speed Steel Roughing End Mill, Regular, Center Cut/Non-Coated Model | High-Speed Steel Roughing End Mill, Long, Center Cut/Non-Coated Model | High-Speed Steel Roughing End Mill, Short, Long Shank, Center Cut/Non-Coated Model | TiAlN Coated High-Speed Steel Roughing End Mill, Short, Center Cut | High-Speed Steel Square End Mill, 2-Flute/Short/Non-Coated Model | High-Speed Steel Square End Mill, 2-Flute/Regular/Non-Coated Model | High-Speed Steel Square End Mill, 2-Flute/Long/Non-Coated Model | High-Speed Steel Square End Mill, 4-Flute, Short/Non-Coated Model | High-Speed Steel Square End Mill, 4-Flute, Regular/Non-Coated Model | ||||||||||||||||||||||||||
| Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 6 Days or more | 8 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more |
| Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||||||||||||||||
| Flute Diameter (D)(φ) | 6 ～ 50 | 3 ～ 40 | 2.5 ～ 50 | 6 ～ 50 | 0.45 ～ 60 | 6 ～ 50 | 6 ～ 50 | 10 ～ 50 | 3 ～ 30 | 8 ～ 25 | 1 ～ 50 | 0.8 ～ 40 | 12 ～ 50 | 6 ～ 50 | 3 ～ 25 | 1 ～ 60 | 3 ～ 50 | 5 ～ 40 | 10 ～ 50 | 5 ～ 50 | 6 ～ 50 | 10 ～ 50 | 6 ～ 30 | 5 ～ 50 | 6 ～ 50 | 10 ～ 50 | 6 ～ 30 | 5 ～ 30 | 1 ～ 50 | 1 ～ 25 | 3 ～ 40 | 3 ～ 40 | 3 ～ 30 | 3 ～ 40 | 1 ～ 50 | 1 ～ 25 | 3 ～ 40 | 3 ～ 40 | 3 ～ 30 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 3 ～ 25 | 8 ～ 25 | 8 ～ 25 |
| Flute Length (ℓ)(mm) | 13 ～ 75 | 15 ～ 110 | 7 ～ 70 | 15 ～ 70 | 1.1 ～ 80 | 13 ～ 75 | 16 ～ 112 | 45 ～ 150 | 5 ～ 55 | - | 2 ～ 70 | 6 ～ 110 | 40 ～ 120 | 24 ～ 150 | 5 ～ 25 | 2 ～ 85 | 20 ～ 250 | 15 ～ 100 | 20 ～ 75 | 13 ～ 75 | 19 ～ 112 | 45 ～ 150 | 11 ～ 45 | 13 ～ 75 | 19 ～ 112 | 45 ～ 150 | 11 ～ 45 | 13 ～ 45 | 2.5 ～ 75 | 3.5 ～ 60 | 15 ～ 110 | 8 ～ 65 | 12 ～ 68 | 15 ～ 110 | 2.5 ～ 75 | 3.5 ～ 60 | 15 ～ 110 | 8 ～ 65 | 12 ～ 68 | 8 ～ 50 | 10 ～ 60 | 8 ～ 45 | 12 ～ 68 | - | - |
| Work Material | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] / Titanium[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[◎] / Aluminum[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] |
| Flute Shape Type | Roughing | Square | Square | Roughing | Square | Roughing | Roughing | Roughing | Roughing | Square | Square | Square | Roughing | Roughing | Square | Square | Square | Roughing | Square | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Roughing | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
| Number of Flutes(sheet) | 4 ～ 6 | 4 | 4 | 4 ～ 6 | 2 | 4 ～ 6 | 4 ～ 6 | 4 ～ 6 | 3 ～ 4 | 2 | 2 | 2 | 4 ～ 8 | 4 ～ 6 | 2 | 2 | 2 | 4 ～ 6 | 4 ～ 6 | 3 ～ 6 | 3 ～ 6 | 4 ～ 6 | 3 ～ 4 | 3 ～ 6 | 3 ～ 6 | 4 ～ 6 | 3 ～ 4 | 3 ～ 6 | 2 | 2 | 2 | 4 | 4 | 4 | 2 | 2 | 2 | 4 | 4 | 2 | 2 | 4 | 4 | 2 | 4 |
| Tool Material Type | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel | Cobalt High-Speed Steel |
| Processing Applications | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Inclined Cutting | Side Surface / Groove | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Groove | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface | Flat Surface / Side Surface / Groove / Inclined Cutting | Side Surface | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Inclined Cutting | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove | Flat Surface / Side Surface / Groove / Countersunk | Flat Surface / Side Surface / Groove / Countersunk |
| Link Diameter (d)(mm) | 6 ～ 42 | 6 ～ 32 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 6 ～ 42 | 10 ～ 42 | 6 ～ 25 | 10 ～ 25 | 6 ～ 42 | 6 ～ 32 | 12 ～ 42 | 6 ～ 42 | 6 ～ 25 | 6 ～ 42 | 6 ～ 42 | 6 ～ 32 | 10 ～ 42 | 6 ～ 42 | 6 ～ 42 | 10 ～ 42 | 6 ～ 25 | 6 ～ 42 | 6 ～ 42 | 10 ～ 42 | 6 ～ 25 | 6 ～ 25 | 6 ～ 42 | 6 ～ 25 | 6 ～ 32 | 6 ～ 32 | 6 ～ 25 | 6 ～ 32 | 6 ～ 42 | 6 ～ 25 | 6 ～ 32 | 6 ～ 32 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 6 ～ 25 | 10 ～ 25 | 10 ～ 25 |
| Coating | TiN | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiN | TiN | TiN | TiCN | TiCN / Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | For General Steel (AlCrN etc.) | - | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiAlN | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated | TiCN / Non-Coated |
| Overall Length (L)(mm) | 57 ～ 177 | 60 ～ 195 | 50 ～ 160 | 60 ～ 160 | 45 ～ 170 | 57 ～ 177 | 60 ～ 214 | 95 ～ 252 | 55 ～ 165 | 60 ～ 130 | 50 ～ 160 | 50 ～ 195 | 90 ～ 210 | 68 ～ 252 | 50 ～ 95 | 50 ～ 185 | 60 ～ 345 | 80 ～ 220 | 130 ～ 350 | 57 ～ 177 | 63 ～ 214 | 95 ～ 252 | 80 ～ 160 | 57 ～ 177 | 63 ～ 214 | 95 ～ 252 | 80 ～ 160 | 57 ～ 121 | 45 ～ 165 | 45 ～ 130 | 60 ～ 195 | 52 ～ 150 | 55 ～ 144 | 60 ～ 195 | 45 ～ 165 | 45 ～ 130 | 60 ～ 195 | 52 ～ 150 | 55 ～ 144 | 50 ～ 120 | 50 ～ 130 | 52 ～ 121 | 55 ～ 144 | 60 ～ 120 | 69 ～ 121 |
| Helix Angle (θ) | Weak Helix (15 to 25°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Weak Helix (15 to 25°) | Standard Helix (30 to 40°) | Weak Helix (15 to 25°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) |
| Base-Blade Availability | - | Included | - | - | - | - | - | - | Included | Included | - | - | - | - | - | Included | Included | Included | Included / None | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included | Included |
| Length Under Neck (ℓ1)(mm) | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | 64 ～ 144 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
| Link | Straight | - | - | - | Straight | Straight | Straight | Straight | - | - | - | Straight | Straight | Straight | Straight | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Loading...
Configure
Stock
-
- Show Stock Products
Specification/Dimensions
-
Metric / Inch
- metric
-
Flute Diameter (D)(φ)
-
0.45～0.9
- 0.45
- 0.8
- 0.9
-
1～1.9
- 1
- 1/2
- 1.1
- 1.2
- 1.3
- 1.4
- 1.5
- 1.59
- 1.6
- 1.7
- 1.8
- 1.9
-
2～2.9
- 2
- 2.1
- 2.2
- 2.3
- 2.38
- 2.4
- 2.5
- 2.6
- 2.7
- 2.8
- 2.9
-
3～3.97
- 3
- 3/4
- 3.1
- 3.18
- 3.2
- 3.3
- 3.4
- 3.5
- 3.6
- 3.7
- 3.8
- 3.9
- 3.97
-
4～4.9
- 4
- 4.1
- 4.2
- 4.3
- 4.4
- 4.5
- 4.6
- 4.7
- 4.76
- 4.8
- 4.9
-
5～5.9
- 5
- 5/8
- 5.1
- 5.2
- 5.3
- 5.4
- 5.5
- 5.56
- 5.6
- 5.7
- 5.8
- 5.9
-
6～6.9
- 6
- 6.05
- 6.1
- 6.2
- 6.3
- 6.35
- 6.4
- 6.5
- 6.6
- 6.7
- 6.8
- 6.9
-
7～7.94
- 7
- 7/8
- 7.1
- 7.2
- 7.3
- 7.4
- 7.5
- 7.6
- 7.7
- 7.8
- 7.9
- 7.94
-
8～8.9
- 8
- 8.1
- 8.2
- 8.3
- 8.4
- 8.5
- 8.6
- 8.7
- 8.8
- 8.9
-
9～9.9
- 9
- 9.1
- 9.2
- 9.3
- 9.4
- 9.5
- 9.53
- 9.6
- 9.7
- 9.8
- 9.9
-
10～10.9
- 10
- 10.1
- 10.2
- 10.3
- 10.4
- 10.5
- 10.6
- 10.7
- 10.8
- 10.9
-
11～11.9
- 11
- 11.1
- 11.11
- 11.2
- 11.3
- 11.4
- 11.5
- 11.6
- 11.7
- 11.8
- 11.9
-
12～12.9
- 12
- 12.1
- 12.2
- 12.3
- 12.4
- 12.5
- 12.6
- 12.7
- 12.8
- 12.9
-
13～13.9
- 13
- 13.1
- 13.2
- 13.3
- 13.4
- 13.5
- 13.6
- 13.7
- 13.8
- 13.9
-
14～14.9
- 14
- 14.1
- 14.2
- 14.29
- 14.3
- 14.4
- 14.5
- 14.6
- 14.7
- 14.8
- 14.9
-
15～15.9
- 15
- 15.1
- 15.2
- 15.3
- 15.4
- 15.5
- 15.6
- 15.7
- 15.8
- 15.88
- 15.9
-
16～16.9
- 16
- 16.1
- 16.2
- 16.3
- 16.4
- 16.5
- 16.6
- 16.7
- 16.8
- 16.9
-
17～17.9
- 17
- 17.1
- 17.2
- 17.3
- 17.4
- 17.46
- 17.5
- 17.6
- 17.7
- 17.8
- 17.9
-
18～18.9
- 18
- 18.1
- 18.2
- 18.3
- 18.4
- 18.5
- 18.6
- 18.7
- 18.8
- 18.9
-
19～19.9
- 19
- 19.05
- 19.1
- 19.2
- 19.3
- 19.4
- 19.5
- 19.6
- 19.7
- 19.8
- 19.9
-
20～20.9
- 20
- 20.1
- 20.2
- 20.3
- 20.4
- 20.5
- 20.6
- 20.64
- 20.7
- 20.8
- 20.9
-
21～21.9
- 21
- 21.1
- 21.2
- 21.3
- 21.4
- 21.5
- 21.6
- 21.7
- 21.8
- 21.9
-
22～22.9
- 22
- 22.1
- 22.2
- 22.23
- 22.3
- 22.4
- 22.5
- 22.6
- 22.7
- 22.8
- 22.9
-
23～23.9
- 23
- 23.1
- 23.2
- 23.3
- 23.4
- 23.5
- 23.6
- 23.7
- 23.8
- 23.81
- 23.9
-
24～24.9
- 24
- 24.1
- 24.2
- 24.3
- 24.4
- 24.5
- 24.6
- 24.7
- 24.8
- 24.9
-
25～25.9
- 25
- 25.1
- 25.2
- 25.3
- 25.4
- 25.5
- 25.6
- 25.7
- 25.8
- 25.9
-
26～26.9
- 26
- 26.1
- 26.2
- 26.3
- 26.4
- 26.5
- 26.6
- 26.7
- 26.8
- 26.9
-
27～27.9
- 27
- 27.1
- 27.2
- 27.3
- 27.4
- 27.5
- 27.6
- 27.7
- 27.8
- 27.9
-
28～28.9
- 28
- 28.1
- 28.2
- 28.3
- 28.4
- 28.5
- 28.6
- 28.7
- 28.8
- 28.9
-
29～29.9
- 29
- 29.1
- 29.2
- 29.3
- 29.4
- 29.5
- 29.6
- 29.7
- 29.8
- 29.9
-
30～30.9
- 30
- 30.1
- 30.2
- 30.3
- 30.4
- 30.5
- 30.6
- 30.7
- 30.8
- 30.9
-
31～31.9
- 31
- 31.1
- 31.2
- 31.3
- 31.4
- 31.5
- 31.6
- 31.7
- 31.75
- 31.8
- 31.9
-
32～32.9
- 32
- 32.1
- 32.2
- 32.3
- 32.4
- 32.5
- 32.6
- 32.7
- 32.8
- 32.9
-
33～33.9
- 33
- 33.1
- 33.2
- 33.3
- 33.4
- 33.5
- 33.6
- 33.7
- 33.8
- 33.9
-
34～34.9
- 34
- 34.1
- 34.2
- 34.3
- 34.4
- 34.5
- 34.6
- 34.7
- 34.8
- 34.9
-
35～35.9
- 35
- 35.1
- 35.2
- 35.3
- 35.4
- 35.5
- 35.6
- 35.7
- 35.8
- 35.9
-
36～36.9
- 36
- 36.1
- 36.2
- 36.3
- 36.4
- 36.5
- 36.6
- 36.7
- 36.8
- 36.9
-
37～37.9
- 37
- 37.1
- 37.2
- 37.3
- 37.4
- 37.5
- 37.6
- 37.7
- 37.8
- 37.9
-
38～38.9
- 38
- 38.1
- 38.2
- 38.3
- 38.4
- 38.5
- 38.6
- 38.7
- 38.8
- 38.9
-
39～39.9
- 39
- 39.1
- 39.2
- 39.3
- 39.4
- 39.5
- 39.6
- 39.7
- 39.8
- 39.9
-
40～40.9
- 40
- 40.1
- 40.2
- 40.3
- 40.4
- 40.5
- 40.6
- 40.7
- 40.8
- 40.9
-
41～41.9
- 41
- 41.1
- 41.2
- 41.3
- 41.4
- 41.5
- 41.6
- 41.7
- 41.8
- 41.9
-
42～42.9
- 42
- 42.1
- 42.2
- 42.3
- 42.4
- 42.5
- 42.6
- 42.7
- 42.8
- 42.9
-
43～43.9
- 43
- 43.1
- 43.2
- 43.3
- 43.4
- 43.5
- 43.6
- 43.7
- 43.8
- 43.9
-
44～44.9
- 44
- 44.1
- 44.2
- 44.3
- 44.4
- 44.5
- 44.6
- 44.7
- 44.8
- 44.9
-
45～45.5
- 45
- 45.5
-
46～46.5
- 46
- 46.5
-
47～47.5
- 47
- 47.5
-
48～48.5
- 48
- 48.5
-
49～49.5
- 49
- 49.5
-
50～50.8
- 50
- 50.5
- 50.8
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
-
77
-
78
-
79
-
80
-
85
-
90
-
95
-
100
[2.7-2.99/0.01φ Unit(s)][3.15-3.5/0.01φ Unit(s)][3.6-4/0.01φ Unit(s)][4.05-14.99/0.01φ Unit(s)][15.01-16/0.01φ Unit(s)][17-18.99/0.01φ Unit(s)][19.01-19.99/0.01φ Unit(s)][20.01-22.99/0.01φ Unit(s)][24-25/0.01φ Unit(s)]
-
-
Flute Length (ℓ)(mm)
-
Work Material
-
Flute Shape Type
- Square
- Roughing
- For Key Grooves
-
Number of Flutes(sheet)
-
Tool Material Type
-
Processing Applications
-
Link Diameter (d)(mm)
-
Coating
-
Overall Length (L)(mm)
-
Helix Angle (θ)
-
Base-Blade Availability
-
Length Under Neck (ℓ1)(mm)
-
Link
Narrow search by specifying Manufacturer
-
- OSG (47)
- S&K (35)
- Nachi-Fujikoshi (27)
- EIKOSHA (3)
- FUKUDA (0)
- ESCO (0)
- TAIYO TOOL (0)
- ASAHI TOOLS (0)
CAD
-
- 2D
- 3D
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy