(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
HM Coated 2-Flute, Long Neck Ball HSLB
UNION TOOL
•Model: Long Neck Bore
•Number Of Flutes (sheet): 2
•Coating: For High Hardness (Silicone-Based)
Days to Ship: | 8 Days or more |
---|
2-Flute, Long Neck, Ball End Type (Deep Rib Ball Type) WXL-LN-EBD
OSG
The hard lubricant film WXL coating is effective for a wide range of processing, from mold materials to copper electrodes.
Days to Ship: | 8 Days or more |
---|
UNION TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: For High Hardness (Silicone-Based)
Days to Ship: | 8 Days or more |
---|
HLB, HM Coated 2-Flute Long Neck Ball
UNION TOOL
•Model: Long Neck Bore
•Number Of Flutes (sheet): 2
•Coating: For High Hardness (Silicone-Based)
•R Precision (µm): -0.002~0.002
•With/Without Torsion: Available
Days to Ship: | 8 Days or more |
---|
MSB230 MUGEN-COATING 2-Flute Ball End Mill
NS TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: TiAlN
•With/Without Torsion: Available
Days to Ship: | 8 Days or more |
---|
All Purpose Ball End Mill Regular 4-Flute 3727
GUHRING
Machining is possible with a wide range of materials, from raw materials to hardened materials. Suitable for processing of curved surfaces.
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Long Neck Ball End Mill, 4-Flute/Long Neck Model
MISUMI
4-blade long neck ball with short blade length that's capable of high feed
Days to Ship: | 8 Days or more |
---|
HBL, HM Coated 2-Flute Long Shank Ball
UNION TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: For High Hardness (Silicone-Based)
•With/Without Torsion: Available
Days to Ship: | 8 Days or more |
---|
MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing)
NS TOOL
•Model: Long Neck Bore
•Number Of Flutes (sheet): 2
•Coating: TiAlN
•With/Without Torsion: Available
•(γ) Neck Angle (°): 12
Days to Ship: | 8 Days or more |
---|
Long-Neck Ball End Mill (for Deep Ribs) NHB-2
NS TOOL
•Model: Long Neck Bore
•Number Of Flutes (sheet): 2
•Coating: Non-Coated
•R Precision (µm): 0.01~-0.01
•With/Without Torsion: Available
Days to Ship: | 8 Days or more |
---|
WXL-Coated 2-Flute Ball End Type WXL-EBD
OSG
[Features]
· High-accuracy ball end mill coated with WXL hard lubricating film coating.
Proven performance on a wide range of work materials.
Long life regardless of whether being used for dry-type or wet-type machining.
Days to Ship: | 8 Days or more |
---|
Carbide Ball End Mill for Rib for Resin Processing PRB-2
KYOWASEIKO
Blade shape has been given excellent sharpness for resin machining. Longer neck section for deep machining.
Days to Ship: | 8 Days or more |
---|
Nachi-Fujikoshi
[Features]
· Supports a wide range of materials from raw materials to hardened materials.
· GSX II coating improves heat and abrasion resistance.
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Ball End Mill (R accuracy ±3μm)
MISUMI
Ball end mill of the R Accuracy ± 3μm Series for machining everything from general steel to heat treated steel
Days to Ship: | 8 Days or more |
---|
XAC Series Carbide Ball End Mill, 2-Flute/Short, Long Shank Model
MISUMI
Long shank items are available at low prices[C-Value]
Days to Ship: | 8 Days or more |
---|
MISUMI
Astonishingly inexpensive. Unprecedented price reduction on the premium diamond coated products. [C-Value]
Days to Ship: | Same day or more |
---|
Show Stock Products
MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute/Regular Model
MISUMI
Also announcing a user friendly regular flute length version
Days to Ship: | 8 Days or more |
---|
MRC Series Carbide Long Neck Ball End Mill, 2-Flute/Long Neck Model
MISUMI
The high-performance MRC series is available in the industry's largest number of sizes
Days to Ship: | 8 Days or more |
---|
Long Neck for Copper Work, Ball CURIBR
Nachi-Fujikoshi
Ideal for fine processing of copper electrodes. Available in various sizes and can be used for all kinds of machining.
Days to Ship: | 8 Days or more |
---|
2-Flute, Ball End, Miniature Type CRN-EBD-3
OSG
A small diameter ball end mill series with a CrN coating for excellent lubricity. Ideal for fine processing of copper electrodes and IT parts.
Days to Ship: | 8 Days or more |
---|
OSG
High toughness carbide alloy is used, providing a long service life at medium to low speeds
Days to Ship: | 8 Days or more |
---|
2-Flute, Ball End Type for Copper / Aluminum Alloy / Plastic CAP-EBD
OSG
Ball end mill for copper, aluminum alloy, and plastic. Highly sharp with good chip discharge.
Days to Ship: | 8 Days or more |
---|
3-Flute, Pencil-Neck, Ball End High-Cutting, High-Feed Type PHX-PC-DBT
OSG
Realizes high efficiency machining that will change the way you think about deep engraving. The unique spiral ball blade prevents vibration during deep-engraving and achieves stable high-feed cutting.
Days to Ship: | 8 Days or more |
---|
2-Flute, Long Neck, Ball End Type CBN-LN-SXB
OSG
Blade uses a sintered CBN material.
Days to Ship: | 8 Days or more |
---|
HFB, HM Coated 4-Flute High-Efficiency Short Shank Ball
UNION TOOL
•Model: Bore
•Number Of Flutes (sheet): 4
•Coating: For High Hardness (Silicone-Based)
•With/Without Torsion: Available
•Shank Taper Angle Bta (°): 16°
Days to Ship: | 8 Days or more |
---|
DCB 2-Flute Diamond-Coated Ball for Graphite Processing
UNION TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: Diamond Coat
•R Precision (µm): -0.01~0.01
•With/Without Torsion: Available
Days to Ship: | 8 Days or more |
---|
CFB for Raw Material to Processing, 3-Flute Ball
UNION TOOL
•Model: Bore
•Number Of Flutes (sheet): 3
•Coating: TiCN
•With/Without Torsion: Available
•Shank Taper Angle Bta (°): 16°
Days to Ship: | 8 Days or more |
---|
NS TOOL
•Model: Bore
•Number Of Flutes (sheet): 3
•Coating: TiAlN
•R Precision (µm): 0.01~-0.01
•With/Without Torsion: Available
Days to Ship: | 8 Days or more |
---|
RSB230 Ball-End Mill for Resin Clear Cut
NS TOOL
•Model: Long Neck Bore
•Number Of Flutes (sheet): 2
•Coating: Non-Coated
•With/Without Torsion: Available
Days to Ship: | 8 Days or more |
---|
MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting)
NS TOOL
•Model: Long Neck Bore
•Number Of Flutes (sheet): 2
•Coating: TiAlN
•R Precision (µm): 0.005~-0.005
•Link Diameter (d) (mm): 4
Days to Ship: | 8 Days or more |
---|
MSBL230 MUGEN-COATING Long Ball End Mill
NS TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: TiAlN
•R Precision (µm): 0.01~-0.01
•With/Without Torsion: Available
Days to Ship: | 8 Days or more |
---|
UNION TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: TiCN
•With/Without Torsion: Available
•Shank Taper Angle Bta (°): 11°
Days to Ship: | 8 Days or more |
---|
UNION TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: Others
•R Precision (µm): -0.01~0.01
•With/Without Torsion: NA
Days to Ship: | 8 Days or more |
---|
NS TOOL
•Model: Bore
•Number Of Flutes (sheet): 2
•Coating: Non-Coated
•R Precision (µm): 0.02~-0.02
•With/Without Torsion: Available
Days to Ship: | 8 Days or more |
---|
Standard Ball End Mill, 2-Flute
ATOM
Supports a wide range of applications, from general steel to nonferrous metals and resins. High sharpness without coating achieves high-precision and high-quality finished surfaces.
Days to Ship: | 8 Days or more |
---|
SBD2LA Long Ball End Mill, 2-Flute, OK Coated
OKAZAKI
The adoption of a long shank allows for a wide range of mold machining.
Days to Ship: | 12 Days or more |
---|
DIJET
Ultrafine particle carbide alloy with excellent wear resistance ensures long tool life.
Days to Ship: | 8 Days or more |
---|
Special Rounded Shape Bottom Blade, 6-Blade, High-Feed Processing 6PDRS
KYOCERA
•Model: Bore
•Number Of Flutes (sheet): 6
•Coating: For General Steel (AlCrN etc.)
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Ball End Mill (for shrink fit holder/R accuracy ±3μm) 2-Flute/Stub Model
MISUMI
High-precision ball end mill for shrink fit holder is ideal for high-precision 3D machining
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Ball End Mill, for Shrinkage Fitting, 2-Flute/Stub Model
MISUMI
Shrink-fit chuck supported type that achieves the high-accuracy machining
Days to Ship: | 8 Days or more |
---|
XAL Series Carbide Ball End Mill, 2-Flute/Short Model
MISUMI
XAL Series is the definitive choice for cost-sensitive customers [C-Value]
Days to Ship: | 8 Days or more |
---|
XAC Series Carbide Ball End Mill, 2-Flute/Short Model
MISUMI
Standard TiAlN coat [C-Value] series
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Ball End Mill, 2-Flute, Short Model
MISUMI
A staple item that's suitable for the high-precision 3D processing of mold
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Ball End Mill, Regular Model
MISUMI
Sharpness-Emphasized Positive Blade
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Ball End Mill, 2-Flute/Short, Long Shank Model
MISUMI
A long shank type that's ideal for deep engraving
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Specifications |
R Size(mm) |
Model |
Work Material |
Flute Length (ℓ)(mm) |
Number of Flutes(sheet) |
Coating |
Overall Length (L)(mm) |
Length Under Neck (ℓ1)(mm) |
Link Diameter (d)(mm) |
R Precision(µm) |
Processing Applications |
|
|
| |||||||||||||||||||||||||||||||||||||||||||
Brand | UNION TOOL | OSG | UNION TOOL | UNION TOOL | NS TOOL | GUHRING | MISUMI | UNION TOOL | NS TOOL | NS TOOL | OSG | KYOWASEIKO | Nachi-Fujikoshi | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | Nachi-Fujikoshi | OSG | OSG | OSG | OSG | OSG | UNION TOOL | UNION TOOL | UNION TOOL | NS TOOL | NS TOOL | NS TOOL | NS TOOL | UNION TOOL | UNION TOOL | NS TOOL | ATOM | OKAZAKI | DIJET | KYOCERA | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
Product Series | 2-Flute, Long Neck, Ball End Type (Deep Rib Ball Type) WXL-LN-EBD | TSC Series Carbide Long Neck Ball End Mill, 4-Flute/Long Neck Model | MRB230 MUGEN-COATING Long Neck Ball End Mill (for Deep Ribbing) | XAC Series Carbide Ball End Mill, 2-Flute/Short, Long Shank Model | MRC Series Carbide Ball End Mill, for Heat-Treated Steel Machining, 2-Flute/Regular Model | MRC Series Carbide Long Neck Ball End Mill, 2-Flute/Long Neck Model | 2-Flute, Ball End Type for Copper / Aluminum Alloy / Plastic CAP-EBD | 3-Flute, Pencil-Neck, Ball End High-Cutting, High-Feed Type PHX-PC-DBT | MRB230SF MUGEN-COATING Long Neck Ball End Mill with Short Shank (for Shrink Fitting) | Special Rounded Shape Bottom Blade, 6-Blade, High-Feed Processing 6PDRS | TSC Series Carbide Ball End Mill (for shrink fit holder/R accuracy ±3μm) 2-Flute/Stub Model | TSC Series Carbide Ball End Mill, for Shrinkage Fitting, 2-Flute/Stub Model | TSC Series Carbide Ball End Mill, 2-Flute/Short, Long Shank Model | ||||||||||||||||||||||||||||||||
Days to Ship | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 12 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
| ||||||||||||||||||||||||||||||||
R Size(mm) | 0.05 ~ 3 | 0.05 ~ 3 | 0.03 ~ 6 | 0.4 ~ 3 | 0.05 ~ 10 | - | 1 ~ 3 | 1.5 ~ 6 | 0.05 ~ 3 | 0.4 ~ 3 | 0.05 ~ 10 | 0.1 ~ 2.5 | 0.2 ~ 10 | 0.5 ~ 3 | 2 ~ 8 | 0.2 ~ 3 | 0.2 ~ 8 | 0.05 ~ 3 | 0.1 ~ 3 | 0.1 ~ 1.5 | 0.5 ~ 12.5 | 0.5 ~ 10 | 0.5 ~ 6 | 0.2 ~ 1.5 | 1 ~ 6 | 0.5 ~ 6 | 0.3 ~ 6 | 0.5 ~ 6 | 0.1 ~ 3 | 0.1 ~ 1.5 | 0.1 ~ 5 | R0.05 ~ R6 | 0.1 ~ 3 | 3 ~ 6 | 0.5 ~ 10 | 1 ~ 12.5 | 0.5 ~ 10 | - | 0.3 ~ 2 | 0.2 ~ 6 | 0.05 ~ 10 | 0.2 ~ 12.5 | 0.05 ~ 10 | 0.2 ~ 8 | 0.5 ~ 12.5 |
Model | Long Neck Bore | Long Neck Bore | Bore | Long Neck Bore | Bore | Bore | Long Neck Bore | Bore | Long Neck Bore | Long Neck Bore | Bore | Bore | Bore | Bore | Bore | Long Neck Bore | Bore | Long Neck Bore | Long Neck Bore | Bore | Bore | Bore | Bore | Long Neck Bore | Bore | Bore | Bore | Bore | Long Neck Bore | Long Neck Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore | Bore |
Work Material | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | - | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[◎] | Aluminum[◎] / Resin[◎] | General Steel[○] / Heat-Treated Steel[○] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Graphite[◎] / Resin[○] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / High-Hardness Steel – HRC65[○] / Stainless Steel[○] / Cast Iron[◎] | Aluminum[◎] / Copper[◎] | Aluminum[○] / Copper[◎] / Resin[◎] | General Steel[○] / Heat-Treated Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[○] / Stainless Steel[○] / Cast Iron[○] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] | High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[◎] / Titanium[◎] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Aluminum[◎] / Titanium[○] / Copper[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / Stainless Steel[◎] / Cast Iron[○] / Titanium[○] / Copper[◎] | - | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Aluminum[◎] / Copper[◎] / Resin[◎] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Aluminum[◎] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[○] / Titanium[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] / High-Hardness Steel – HRC65[◎] / Cast Iron[◎] / Aluminum[○] / Titanium[○] / Copper[○] / Graphite[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[◎] / High-Hardness Steel ~ HRC60[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[○/◎] / Resin[○] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] |
Flute Length (ℓ)(mm) | 0.08 ~ 4.8 | 0.08 ~ 6 | 0.06 ~ 22 | 0.64 ~ 4.8 | 0.1 ~ 30 | - | 1.6 ~ 6 | 4.5 ~ 25 | 0.07 ~ 6 | 0.6 ~ 6 | 0.2 ~ 38 | 0.3 ~ 6 | 0.6 ~ 30 | 1.5 ~ 9 | 8 ~ 30 | 0.6 ~ 7.5 | 1.5 ~ 30 | 0.07 ~ 6 | 0.2 ~ 6 | 0.4 ~ 8 | 2.5 ~ 50 | 2.5 ~ 38 | 1.5 ~ 18 | 0.3 ~ 1.8 | 3 ~ 18 | 5 ~ 55 | 0.9 ~ 18 | 1.5 ~ 20 | 0.6 ~ 30 | 0.15 ~ 2.5 | 0.5 ~ 25 | 0.1 ~ 22 | 0.14 ~ 4.2 | 15 ~ 30 | 3 ~ 40 | 2 ~ 60 | 1.5 ~ 30 | 4.5 ~ 9 | 0.6 ~ 4 | 0.4 ~ 12 | 0.2 ~ 38 | 0.8 ~ 50 | 0.2 ~ 25 | 1.5 ~ 30 | 2 ~ 30 |
Number of Flutes(sheet) | 2 | 2 | 2 | 2 | 2 | 4 | 4 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 3 | 2 | 4 | 2 | 3 | 3 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 2 | 6 | 2 | 2 | 2 | 2 | 2 | 2 | 2 |
Coating | For High Hardness (Silicone-Based) | For General Steel (AlCrN etc.) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | TiAlN | Others | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | TiAlN | Non-Coated | For General Steel (AlCrN etc.) | - | For General Steel (AlCrN etc.) | For High Hardness (Silicone-Based) | TiAlN | Diamond Coat | MRC | MRC | CrN | CrN | Non-Coated | Non-Coated | For High Hardness (Silicone-Based) | Non-Coated | For High Hardness (Silicone-Based) | Diamond Coat | TiCN | TiAlN | Non-Coated | TiAlN | TiAlN | TiCN | Others | Non-Coated | Non-Coated | TiAlN | TiAlN | For General Steel (AlCrN etc.) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For General Steel (AlCrN etc.) | TiAlN | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) |
Overall Length (L)(mm) | 45 ~ 120 | 45 ~ 120 | 50 ~ 110 | 45 ~ 80 | 50 ~ 170 | 50 ~ 104 | 50 ~ 70 | 80 ~ 200 | 45 ~ 120 | 45 ~ 120 | 40 ~ 160 | 45 ~ 100 | 50 ~ 160 | 50 ~ 90 | 100 ~ 250 | 50 ~ 110 | 50 ~ 140 | 50 ~ 110 | 45 ~ 80 | 40 | 50 ~ 180 | 60 ~ 180 | 60 ~ 220 | 45 ~ 50 | 40 ~ 60 | 60 ~ 180 | 50 ~ 120 | 60 ~ 120 | 50 ~ 130 | 35 ~ 50 | 70 ~ 200 | 50 ~ 110 | 50 ~ 60 | 120 ~ 180 | 40 ~ 105 | 80 ~ 230 | 50 ~ 180 | 57 ~ 83 | 40 | 40 ~ 65 | 40 ~ 160 | 40 ~ 180 | 40 ~ 150 | 50 ~ 140 | 70 ~ 280 |
Length Under Neck (ℓ1)(mm) | 0.3 ~ 60 | 0.3 ~ 50 | - | 3 ~ 30 | - | - | 4 ~ 30 | - | 0.3 ~ 50 | 6 ~ 50 | - | - | - | - | - | 2 ~ 60 | - | 0.2 ~ 60 | 0.5 ~ 35 | - | - | - | 6 ~ 160.8 | 2 ~ 15 | - | - | - | - | 2 ~ 80 | 0.5 ~ 20 | - | - | - | - | - | 14 ~ 21 | 3 ~ 12.5 | 9 ~ 18 | - | - | - | - | 15 ~ 75 | 17 ~ 80 | 15 ~ 80 |
Link Diameter (d)(mm) | 3 ~ 6 | 3 ~ 6 | 4 ~ 12 | 4 ~ 6 | 4 ~ 20 | 6 ~ 20 | 4 ~ 6 | 3 ~ 12 | 4 ~ 6 | 4 ~ 6 | 4 ~ 20 | 4 ~ 6 | 4 ~ 20 | 6 | 4 ~ 16 | 4 ~ 6 | 4 ~ 16 | 4 ~ 6 | 4 ~ 6 | 3 | 4 ~ 25 | 4 ~ 20 | 6 ~ 20 | 4 ~ 6 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 6 ~ 12 | 3 ~ 6 | 4 | 3 ~ 10 | 4 ~ 12 | 4 ~ 6 | 6 ~ 12 | 4 ~ 20 | 6 ~ 25 | 4 ~ 20 | 6 ~ 12 | 6 | 4 ~ 12 | 3 ~ 20 | 3 ~ 25 | 3 ~ 20 | 4 ~ 16 | 3 ~ 25 |
R Precision(µm) | -0.005~0.005 ~ -0.002~0.002 | -0.005~+0.005 | -0.007~0.007 ~ -0.002~0.002 | -0.002~0.002 | 0.005~-0.005 ~ 0.02~-0.02 | - | -0.007 ~ +0.003 ~ ±0.005 | -0.007~0.007 ~ -0.005~0.005 | 0.005~-0.005 ~ 0.01~-0.01 | 0.01~-0.01 | -0.007~0.003 ~ ±0.01 | +0.01~-0.01 | - | -0.005 ~ +0.001 ~ ±0.003 | ±0.01 | ±0.01 | ±0.005 ~ ±0.01 | ±0.005 | -0.007~+0.003 | -0.01~+0.01 | - | -0.01~+0.01 | - | -0.01~+0.01 | -0.01~0.01 ~ -0.005~0.005 | -0.01~0.01 | -0.01~0.01 ~ -0.005~0.005 | 0.01~-0.01 | 0.005~-0.005 ~ 0.01~-0.01 | 0.005~-0.005 | 0.01~-0.01 | -0.007~0.007 ~ -0.005~0.005 | -0.01~0.01 | 0.02~-0.02 | ±0.01 | - | 5~-5 ~ 10~-10 | - | ±0.003 | -0.007 ~ +0.003 ~ ±0.005 | -0.007 ~ +0.003 ~ ±0.01 | ±0.01 | -0.007 ~ +0.003 ~ ±0.01 | -0.007 ~ +0.003 ~ ±0.01 | -0.007 ~ +0.003 ~ ±0.01 |
Processing Applications | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / R-Groove | - | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | - | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Carving / R-Groove | Curved Surface / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove | Curved Surface / Side Surface / Carving / R-Groove |
Loading...
[5-30/1mm Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy