(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Days to Ship |
|
---|
TSC Series Carbide Square End Mill, 4-Flute/3D Flute Length (Regular) Model
MISUMI
A standard regular size with high versatility
Days to Ship: | Same day or more |
---|
Show Stock Products
TSC Series Carbide End Mill for Key Grooves, 2-Flute/Short Model
MISUMI
The standard key grooving end mills that are sorted by tolerance have been significantly reduced in price
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Radius End Mill for Countersink, 3-Flute/Short Model
MISUMI
A low blade flat type with the blade shape that's ideal for counter boring
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill, 2-Flute/3D Flute Length (Regular) Model
MISUMI
The 3D blade length type that produces a high-quality finish compatible with a wide range of machining areas
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill, 4-Flute/2D Flute Length (Short) Model
MISUMI
The 2D blade length type with high versatility achieves high-precision processing including grooving
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill, 4-Flute/3D Flute Length (Regular) Model
MISUMI
The 3D blade length type that's capable of sophisticated grooving is also known for the producing the high-quality finish
Days to Ship: | 8 Days or more |
---|
MISUMI
The high precision high helical end mill for shrink fit holder is ideal for side finishing
Days to Ship: | 8 Days or more |
---|
XAC Series Carbide Roughing End Mill, Fine Pitch/Regular Model
MISUMI
Strongly compatible with the cost reduction of roughing with the limited special price for standard sizes [C-Value]
Days to Ship: | Same day or more |
---|
Show Stock Products
TSC Series Carbide Roughing End Mill, Fine Pitch/Short Model
MISUMI
Achieves long life and high-speed machining at the same time
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Roughing End Mill, Fine Pitch/Regular Model
MISUMI
The fine pitch achieves excellent surface roughness after machining
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Roughing End Mill, Fine Pitch/Long Regular Model
MISUMI
A long shank type that's ideal for deep engraving
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Roughing End Mill for Stainless Steel Machining
MISUMI
Ideal for the medium-finishing of difficult-to-cut SUS, etc.
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill for Aluminum Machining, 3-Flute/Stub Model
MISUMI
A multi-functional type that's capable of everything from thrusting to continuous high-efficiency machining of aluminum
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill for Aluminum Machining, 2-Flute/2D Flute Length (Short) Model SEC-ALHEM2S
MISUMI
A non-coated type that does not impair the sharpness of the blade
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill for Aluminum Machining, 2-Flute/3D Flute Length (Regular) Model SEC-ALHEM2R
MISUMI
Affordable, non-coated type of the Aluminum Processing Series
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill for Aluminum Machining, 2-Flute/4D Flute Length (Long) Model
MISUMI
The large rake angle prevents the built-up edge that's unique to aluminum
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill for Aluminum Machining, 2-Flute/Extra Long Model
MISUMI
Achieves the standing-wall machining of aluminum in the first shot. Blade length is 5 times the blade diameter
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill for Aluminum Machining, 4-Flute/Regular Model
MISUMI
Valuable Non-Coated Type
For complete product overview and details on Carbide Square End Mill for Aluminum Machining, 4-Flute/Regular Model see the sections below:
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill for Aluminum Machining, 3-Flute/Stub, Long Shank Model
MISUMI
2 types that are recommended in the standing-wall machining of aluminum
Days to Ship: | 8 Days or more |
---|
Carbide Roughing End Mill for Aluminum Machining, 3-Flute/Regular Model
MISUMI
Significantly reduces the roughing time of aluminum
Days to Ship: | 8 Days or more |
---|
CrN Coated Carbide Square End Mill for Copper Electrode Machining, 2-Flute/Regular Model
MISUMI
The CrN coating with excellent lubricity exhibits power in copper electrode processing
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill for Copper Electrode Machining, 2-Flute/Regular Model
MISUMI
A non-coated type that has achieved both the cost reduction and processing performance
Days to Ship: | 8 Days or more |
---|
CrN Coated Carbide Square End Mill for Copper Electrode Machining, 2-Flute/Long Neck Model
MISUMI
A ribbing type with the cutting edge that's suitable for copper machining
Days to Ship: | 8 Days or more |
---|
Diamond Coated Carbide Square End Mill for Graphite Machining, 2-Flute/Long Model
MISUMI
The premium diamond coated products are available at the industry's lowest price [C-Value]
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill for Graphite Machining, 2-Flute/Non-Coated, Long Model
MISUMI
The price of the non-coated product with excellent cost performance has been further reduced
Days to Ship: | 8 Days or more |
---|
Diamond Coated Carbide Square End Mill for Graphite Machining, 4-Flute/Long Model
MISUMI
The premium diamond coated products are available at the industry's lowest price [C-Value]
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill for Graphite Machining, 4-Flute/Non-Coated, Long Model
MISUMI
The price of the non-coated product with excellent cost performance has been further reduced
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill for Resin Machining, 2-Flute/Regular Model
MISUMI
The cutting edge with an emphasis on sharpness is ideal for resin machining
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill for Resin Machining, 2-Flute/Extra Long Model
MISUMI
Extra-long type for resin that's capable of deep processing in the first shot
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill for Resin Machining, 2-Flute/Regular, Long Shank Model
MISUMI
Available in 10 sizes including the long shank type
Days to Ship: | 8 Days or more |
---|
XAL Series Carbide Square End Mill, 2-Flute/1.5D Flute Length (Stub) Model
MISUMI
Stub blade length items that are ideal for grooving are available at incredibly low prices [C-Value]
Days to Ship: | 8 Days or more |
---|
XAL Series Carbide Square End Mill, 2-Flute/2, 5D Flute Length Model
MISUMI
The Misumi's unique lineup of fine blade length is available at attractive low prices[C-Value]
Days to Ship: | 8 Days or more |
---|
XAL Series Carbide Square End Mill, 4-Flute/2.5D Flute Length Model
MISUMI
The Misumi's original fine intermediate blade length is available at a reasonable price[C-Value]
Days to Ship: | 8 Days or more |
---|
XAL Series Carbide Square End Mill, 4-Flute/4D Flute Length (Long) Model
MISUMI
Popular sizes compatible with deeper side milling are available in XAL Series [C-Value]
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Multi-Functional Square End Mill, 4-Flute, 45° Spiral/Short Model, Thrust Z-Feed
MISUMI
MISUMI's original "Z mill" that's thoroughly focused on the thrusting performance
Days to Ship: | 8 Days or more |
---|
Carbide Blade Neck Relief End Mill, 2-Flute/Short Model
MISUMI
Blade relief type is unaffected by interference from tools
Days to Ship: | 10 Days or more |
---|
Carbide Blade Neck Relief End Mill, 2-Flute/Regular Model
MISUMI
Blade relief type is unaffected by interference from tools
Days to Ship: | 10 Days or more |
---|
Non-Coated TS Coated Carbide 0.1mm Unit Corner C Designated End Mill
MISUMI
Corner C can be specified in 0.1 mm increments (coating may be supported)
Days to Ship: | 10 Days or more |
---|
Carbide Blade Neck Relief End Mill, 4-Flute/Short Model
MISUMI
Blade relief type with a 4-flute structure
Days to Ship: | 10 Days or more |
---|
Carbide Blade Neck Relief End Mill, 4-Flute/Regular Model
MISUMI
Blade relief type with a 4-flute structure
Days to Ship: | 10 Days or more |
---|
Carbide Square End Mill for Aluminum Machining, 2-Flute/2D Flute Length (Short) Model XEL-ALHEM2S
MISUMI
Now offering an ultra-affordable aluminum processing end mills with outstanding machined surface accuracy (C-Value)
Days to Ship: | 8 Days or more |
---|
Carbide Square End Mill for Aluminum Machining, 2-Flute/3D Flute Length (Regular) Model XEL-ALHEM2R
MISUMI
Perform one-shot standing-wall machining at high surface accuracy. Now offering a flute length of 3 times the outer diameter at ultra-low price (C-Value)
Days to Ship: | 8 Days or more |
---|
XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion/Regular Model
MISUMI
Introducing a standard model with 45° spiral in the popular XAL Series (C-Value)
Days to Ship: | 8 Days or more |
---|
XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion/Long Model
MISUMI
Introducing a long model with 45° spiral in the popular XAL Series (C-Value)
Days to Ship: | 8 Days or more |
---|
TSC Series Carbide Uneven Lead 4-Flute Square End Mill
MISUMI
Introducing a new addition to the TSC series: the long-awaited unequal lead 4-flute square end mill (helix angle 40° / 43°)
Days to Ship: | 8 Days or more |
---|
Brand |
---|
Product Series |
Days to Ship |
Specifications |
Flute Diameter (D)(φ) |
Work Material |
Flute Length (ℓ)(mm) |
Number of Flutes(sheet) |
Model |
Coating |
Link Diameter (d)(mm) |
Overall Length (L)(mm) |
Length Under Neck (ℓ1)(mm) |
Processing Applications |
Flute Shape |
Helix Angle (θ) |
|
|
|
|
|
|
|
|
| |||||||||||||||||||||||||||||||||||||
Brand | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI | MISUMI |
Product Series | TSC Series Carbide Square End Mill, 4-Flute/3D Flute Length (Regular) Model | TSC Series Carbide End Mill for Key Grooves, 2-Flute/Short Model | TSC Series Carbide Radius End Mill for Countersink, 3-Flute/Short Model | Carbide Square End Mill, 2-Flute/3D Flute Length (Regular) Model | Carbide Square End Mill, 4-Flute/2D Flute Length (Short) Model | Carbide Square End Mill, 4-Flute/3D Flute Length (Regular) Model | XAC Series Carbide Roughing End Mill, Fine Pitch/Regular Model | TSC Series Carbide Roughing End Mill, Fine Pitch/Short Model | TSC Series Carbide Roughing End Mill, Fine Pitch/Regular Model | TSC Series Carbide Roughing End Mill, Fine Pitch/Long Regular Model | TSC Series Carbide Roughing End Mill for Stainless Steel Machining | Carbide Square End Mill for Aluminum Machining, 3-Flute/Stub Model | Carbide Square End Mill for Aluminum Machining, 2-Flute/2D Flute Length (Short) Model SEC-ALHEM2S | Carbide Square End Mill for Aluminum Machining, 2-Flute/3D Flute Length (Regular) Model SEC-ALHEM2R | Carbide Square End Mill for Aluminum Machining, 2-Flute/4D Flute Length (Long) Model | Carbide Square End Mill for Aluminum Machining, 2-Flute/Extra Long Model | Carbide Square End Mill for Aluminum Machining, 4-Flute/Regular Model | Carbide Square End Mill for Aluminum Machining, 3-Flute/Stub, Long Shank Model | Carbide Roughing End Mill for Aluminum Machining, 3-Flute/Regular Model | CrN Coated Carbide Square End Mill for Copper Electrode Machining, 2-Flute/Regular Model | Carbide Square End Mill for Copper Electrode Machining, 2-Flute/Regular Model | CrN Coated Carbide Square End Mill for Copper Electrode Machining, 2-Flute/Long Neck Model | Diamond Coated Carbide Square End Mill for Graphite Machining, 2-Flute/Long Model | Carbide Square End Mill for Graphite Machining, 2-Flute/Non-Coated, Long Model | Diamond Coated Carbide Square End Mill for Graphite Machining, 4-Flute/Long Model | Carbide Square End Mill for Graphite Machining, 4-Flute/Non-Coated, Long Model | Carbide Square End Mill for Resin Machining, 2-Flute/Regular Model | Carbide Square End Mill for Resin Machining, 2-Flute/Extra Long Model | Carbide Square End Mill for Resin Machining, 2-Flute/Regular, Long Shank Model | XAL Series Carbide Square End Mill, 2-Flute/1.5D Flute Length (Stub) Model | XAL Series Carbide Square End Mill, 2-Flute/2, 5D Flute Length Model | XAL Series Carbide Square End Mill, 4-Flute/2.5D Flute Length Model | XAL Series Carbide Square End Mill, 4-Flute/4D Flute Length (Long) Model | TSC Series Carbide Multi-Functional Square End Mill, 4-Flute, 45° Spiral/Short Model, Thrust Z-Feed | Non-Coated TS Coated Carbide 0.1mm Unit Corner C Designated End Mill | Carbide Square End Mill for Aluminum Machining, 2-Flute/2D Flute Length (Short) Model XEL-ALHEM2S | Carbide Square End Mill for Aluminum Machining, 2-Flute/3D Flute Length (Regular) Model XEL-ALHEM2R | XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion/Regular Model | XAL Coated Carbide Multi-Functional Square End Mill, 4-Flute, 45° Torsion/Long Model | ||||||
Days to Ship |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Same day or more
Show Stock Products | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 10 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more | 8 Days or more |
Specifications |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
Flute Diameter (D)(φ) | 1 ~ 20 | 2 ~ 14 | 3 ~ 16 | 0.2 ~ 12 | 1 ~ 20 | 2 ~ 20 | 3 ~ 12 | 6 ~ 20 | 5 ~ 20 | 3 ~ 20 | 5 ~ 20 | 6 ~ 20 | 1 ~ 12 | 0.5 ~ 20 | 0.5 ~ 20 | 3 ~ 12 | 3 ~ 12 | 0.5 ~ 12 | 5 ~ 22 | 5 ~ 20 | 0.5 ~ 12 | 0.5 ~ 20 | 0.5 ~ 3 | 1 ~ 12 | 1 ~ 12 | 2 ~ 12 | 2 ~ 12 | 0.3 ~ 16 | 0.3 ~ 12 | 1 ~ 10 | 0.5 ~ 20 | 1 ~ 12 | 1.5 ~ 16 | 1 ~ 12 | 3 ~ 12 | 6 ~ 12 | 6 ~ 12 | 2 ~ 20 | 6 ~ 12 | 6 ~ 12 | 0.5 ~ 20 | 0.5 ~ 20 | 1 ~ 12 | 1 ~ 20 | 2 ~ 25 |
Work Material | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○] / Stainless Steel[◎] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] / Graphite[○] / Resin[○] | Aluminum[◎] / Copper[○] | Aluminum[○] / Copper[◎] / Resin[○] | Aluminum[○] / Copper[◎] / Graphite[○] / Resin[○] | Aluminum[○] / Copper[◎] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[◎] / Resin[○] | Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎] | Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎] | Aluminum[○] / Copper[○] / Graphite[○] / Resin[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[○] / Aluminum[◎] / Copper[◎] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[◎] / Heat-Treated Steel[○/◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | General Steel[○] / Heat-Treated Steel[○] / Stainless Steel[○] / Cast Iron[○] / Aluminum[○] / Copper[○] | Aluminum[◎] / Copper[○] / Resin[○] | Aluminum[◎] / Copper[○] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / Stainless Steel[○] / Cast Iron[◎] / Aluminum[◎] / Copper[◎] / Resin[○] | General Steel[◎] / Heat-Treated Steel[◎] / High-Hardness Steel ~ HRC55[○] / Stainless Steel[◎] / Cast Iron[○] / Aluminum[○] / Titanium[○] / Copper[○] |
Flute Length (ℓ)(mm) | 3 ~ 60 | 3 ~ 21 | 8 ~ 32 | 0.6 ~ 36 | 2 ~ 40 | 5 ~ 60 | 4.5 ~ 18 | 16 ~ 38 | 10 ~ 38 | 15 ~ 45 | 15 ~ 45 | 15 ~ 50 | 1.5 ~ 18 | 1 ~ 40 | 1.5 ~ 60 | 5 ~ 48 | 15 ~ 60 | 1.5 ~ 28 | 9 ~ 33 | 15 ~ 45 | 1.5 ~ 36 | 1.5 ~ 60 | 0.7 ~ 4.5 | 5 ~ 60 | 5 ~ 60 | 10 ~ 60 | 10 ~ 60 | 0.9 ~ 48 | 1.5 ~ 48 | 3 ~ 20 | 0.75 ~ 30 | 2.5 ~ 30 | 3.75 ~ 40 | 4 ~ 48 | 8 ~ 26 | - | - | 3 ~ 60 | - | - | 1 ~ 40 | 1.5 ~ 60 | 4 ~ 48 | 5 ~ 75 | 4 ~ 50 |
Number of Flutes(sheet) | 4 | 2 | 3 | 2 | 4 | 4 | 4 ~ 6 | 3 ~ 4 | 4 | 3 ~ 4 | 3 ~ 4 | 3 | 3 | 2 | 2 | 2 | 2 | 4 | 3 | 3 | 2 | 2 | 2 | 2 | 2 | 4 | 4 | 2 | 2 | 2 | 2 | 2 | 4 | 4 | 4 | 2 | 2 | 2 ~ 4 | 4 | 4 | 2 | 2 | 4 | 4 | 4 |
Model | Square | Square | Square | Square | Square | Square | Highly-Helical | Roughing | Roughing | Roughing | Roughing | Roughing | Square | Square | Square | Square | Square | Square | Square | Roughing | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square | Square |
Coating | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | Non-Coated | Non-Coated | Non-Coated | For High Hardness (Silicone-Based) | TiAlN | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | For High Hardness (Silicone-Based) | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | CrN | Non-Coated | CrN | Diamond Coat | Non-Coated | Diamond Coat | Non-Coated | Non-Coated | Non-Coated | Non-Coated | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For High Hardness (Silicone-Based) | Non-Coated | Non-Coated | For High Hardness (Silicone-Based) / Non-Coated | Non-Coated | Non-Coated | Non-Coated | Non-Coated | For General Steel (AlCrN etc.) | For General Steel (AlCrN etc.) | For High Hardness (Silicone-Based) |
Link Diameter (d)(mm) | 4 ~ 20 | 6 ~ 16 | 6 ~ 16 | 3 ~ 12 | 4 ~ 20 | 4 ~ 20 | 6 ~ 12 | 6 ~ 20 | 6 ~ 20 | 6 ~ 20 | 6 ~ 20 | 6 ~ 20 | 4 ~ 12 | 4 ~ 20 | 4 ~ 20 | 6 ~ 12 | 6 ~ 12 | 4 ~ 12 | 4 ~ 20 | 6 ~ 20 | 4 ~ 12 | 4 ~ 20 | 4 ~ 6 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 4 ~ 12 | 3 ~ 16 | 3 ~ 12 | 1 ~ 10 | 4 ~ 20 | 4 ~ 12 | 4 ~ 16 | 4 ~ 12 | 6 ~ 12 | 6 ~ 12 | 6 ~ 12 | 4 ~ 20 | 6 ~ 12 | 6 ~ 12 | 4 ~ 20 | 4 ~ 20 | 4 ~ 12 | 4 ~ 20 | 6 ~ 25 |
Overall Length (L)(mm) | 45 ~ 130 | 45 ~ 75 | 50 ~ 110 | 40 ~ 85 | 40 ~ 110 | 45 ~ 130 | 50 ~ 75 | 57 ~ 104 | 57 ~ 104 | 60 ~ 130 | 100 ~ 150 | 60 ~ 130 | 40 ~ 80 | 40 ~ 110 | 40 ~ 130 | 60 ~ 100 | 60 ~ 130 | 40 ~ 80 | 80 ~ 200 | 57 ~ 100 | 50 ~ 90 | 50 ~ 130 | 50 ~ 100 | 75 ~ 200 | 75 ~ 200 | 75 ~ 200 | 75 ~ 200 | 45 ~ 110 | 40 ~ 110 | 65 ~ 180 | 40 ~ 110 | 45 ~ 85 | 45 ~ 105 | 45 ~ 100 | 60 ~ 100 | 45 ~ 75 | 60 ~ 85 | 40 ~ 130 | 45 ~ 75 | 60 ~ 85 | 40 ~ 110 | 40 ~ 130 | 45 ~ 105 | 45 ~ 150 | 50 ~ 120 |
Length Under Neck (ℓ1)(mm) | 23 ~ 92 | - | - | 23 ~ 55 | 17 ~ 73 | 23 ~ 92 | - | - | 17 ~ 66 | 20 ~ 92 | 20 ~ 95 | - | 3 ~ 36 | 17 ~ 73 | 23 ~ 92 | 29 ~ 70 | - | 22 ~ 50 | - | 20 ~ 70 | - | - | 2 ~ 40 | 10 ~ 85 | 10 ~ 85 | 20 ~ 85 | 20 ~ 85 | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - | - |
Processing Applications | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface | Side Surface |
Flute Shape | Sharp Corner / With Lead | Sharp Corner | Sharp Corner | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner | C Surface | Ultra-Small R | Ultra-Small R | Ultra-Small R | C Surface | With Lead | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Ultra-Small R | Ultra-Small R | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | Sharp Corner | - | Sharp Corner | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | Sharp Corner / With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | With Lead | - | - | With Lead | With Lead | With Lead |
Helix Angle (θ) | Standard Helix (30 to 40°) | Weak Helix (15 to 25°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Weak Helix (15 to 25°) | Weak Helix (15 to 25°) | Weak Helix (15 to 25°) | Weak Helix (15 to 25°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Weak Helix (15 to 25°) | Weak Helix (15 to 25°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Standard Helix (30 to 40°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Powerful Helix (45° to 60°) | Uneven Lead |
Loading...
[4-75/1mm Unit(s)]
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy