Nylon Connectors（Connection direction：Angle）

• 

  D1000 Series

  TE Connectivity

  The D-1000 Series are the smallest connectors within the Dynamic Series range.
  
  [Features]
  [Supports a wide range of wires]
  · This connector offers an extensive range of wiring, and supports 30–18 AWG. The outer diameter of the wire coating is large at ⌀ 2.2 mm (when using the D-1200/D-1500 Series), which can also be used as standard on-board.
  [Crimp tool with interchangeable dies]
  · The die on this standard tool is interchangeable. This a single-handle system gives the die purchase for each range, which makes it possible to reduce lead time and minimize implementation costs.
  [A full Series lineup]
  · The 2.0-mm pitch D-1100 and 2.5-mm pitch D-1200 Series are available for selection depending on the wire sizes and the voltages that are used. The lineup includes a number of electrodes up to a maximum of 40 P.
  · The D-1500 Series lineup features 3.5-mm pitch products that are optimally suited for applications, such as bundling signal wires and branching power supplies.
  · The Series lineup includes different color versions in addition to the previous standard black color.
  · In addition to positively promoting the use of multiple electrodes of the same number, it also contributes to a reducing the amount of time required to assemble connectors.
  · The lineup includes more affordable tin plated products, as part of the terminal plating specifications, in addition to conventional products with standard gold plating.
  · Contact options support an extensive range of uses based on application, quality, and cost considerations.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	5 Days or more

• 

  Universal Mate-N-Lok Connector

  TE Connectivity

  Universal Mate-N-Lok connector is designed to be more robust to withstand high voltages.
  [Features]
  ·Infinite keying combinations possible.
  ·Pins and sockets can be used in the same housing.
  ·Housing locks securely and pins and sockets are useable in power supply wiring.
  ·UL and CSA standard compliant.
  [Applications]
  ·Computers, office equipment, home-use gaming equipment, electric appliances, vending machines and other commercial equipment.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Male Header with Solder Pin/734 Series Grade 1/Right Angle/3.5 mm Pitch

  WAGO

  [Features]
  　• Can be horizontally mounted onto a printed circuit board using right-angle solder pins.
  　• Maximum rated current of 10 A is possible using a 1 x 1 mm pin size.
  　• Incorrect insertion is impossible.
  　• An accessory coding key can be attached.

  • Volume Discount

  Days to Ship:	6 Days or more

• 

  D3000 Series

  TE Connectivity

  
  The D-3000 series, compatible with a wide range of dynamic main series sizes.
  
  [Features]
  · Terminal construction resistant to tampering: developed by the automobile industry, a recess tab box construction concept (3-point contact) is used that is difficult to pry apart. These tough contacts offer high reliability and stability in a real work environment.
  · Three types of plating: Select the type of plating best suited for the job and optimize cost performance. Tin plating is suitable for normal use with a low insertion/extraction frequency; 0.38 μm gold plating for frequent insertion and extractions; and 0.76 μm gold plating is suited for use in an even harsher environment.
  · Two types of connection point pressure: Two contact point pressures are available in order to propose a contact environment optimal for the specific type of use. Standard connection point pressure products are for insertion/extraction durability and multiple pin use, and high connection point pressure products are for uses involving strong vibration. These two types can be used separately.
  · High current: Maximum 15 A of regular current (with a temperature elevation of less than 30°C) can be used regardless of size.
  · Newly developed copper alloy material realized with a reliable 3-point contact construction.
  · Lock filling: A clear locking sound and vibration are produced when mating, allowing workers to be sure mating has been successfully completed even in environments with low visibility.
  · Keying: A slit in the housing is provided so that improper unions can be prevented by distinguishing X keys from Y keys. If a keying plug is used, further key patterns may be created.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	5 Days or more

  Show Stock Products

• 

  XA (for PCB) Connector【1-250 Pieces Per Package】

  JST

  This connector has a strong locking mechanism to prevent the housing from coming off, and to prevent mis-insertion when mating.

  • Volume Discount

  Days to Ship:	6 Days or more

• 

  Micro-Latch^TM 2.00 mm Pitch Circuit Board Wafer Angle (53254)

  Molex

  The head of the Molex receptacle housing uses a friction lock for sliding into the opening. Delivers excellent circuit protection and durability against constant inserting and extracting. Angle type (mating housing: 51065)

  • Volume Discount

  Days to Ship:	6 Days or more

• 

  EI Connector Pin Header (Vertical Mounting)【50 Pieces Per Package】

  MISUMI

  Taico electronics amp (current: TE) make. For 2.5 mm pitch vertical mounting with a built-in male contact. 1 package contains 50 pieces.

  • Volume Discount

  • UL
  • CSA
  • TUV
  • For Signal
  • Solder
  • Tin-Plated
  • Insertion

  CAD ：

  2D

  Days to Ship:	Same day or more

  Show Stock Products

• 

  EI Connector Pin Header (Horizontal Mounting)【50 Pieces Per Package】

  MISUMI

  Taico electronics amp (current: TE) make. For 2.5 mm pitch horizontal mounting with a built-in male contact. 1 package contains 50 pieces.

  • Volume Discount

  • UL
  • CSA
  • TUV
  • For Power Supply
  • Solder
  • Tin-Plated
  • Insertion

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  EH Connector Pin Header (Horizontal Mounting)【50 Pieces Per Package】

  MISUMI

  Misumi (JST) make. For 2.5 mm pitch horizontal mounting with a built-in male contact. 1 package contains 50 pieces

  • Volume Discount

  • UL
  • CSA
  • TUV
  • For Power Supply
  • For Signal
  • Sensor
  • Motor
  • Insertion

  Days to Ship:	8 Days or more

• 

  XH Connector Pin Header (Horizontal Mounting)【50 Pieces Per Package】

  MISUMI

  Misumi (JST) make. For 2.5 mm pitch horizontal mounting with a built-in male contact. 1 package contains 50 pieces

  • Volume Discount

  • UL
  • CSA
  • TUV
  • For Power Supply
  • For Signal
  • Sensor
  • Motor
  • Insertion

  Days to Ship:	8 Days or more

• 

  NH Connector Pin Header (Horizontal Mounting)【50 Pieces Per Package】

  MISUMI

  Misumi (JST) make. For 2.5 mm pitch horizontal mounting with a built-in male contact. 1 package contains 50 pieces

  • Volume Discount

  • UL
  • CSA
  • TUV
  • For Power Supply
  • For Signal
  • Sensor
  • Motor
  • Insertion

  Days to Ship:	8 Days or more

• 

  COMBICON Socket Header (Horizontal)

  MISUMI

  Phoenix contact make. Header for horizontal mounting with built-in male contact

  • Volume Discount

  • UL
  • CSA
  • For Signal
  • Sensor
  • DeviceNet
  • Tin-Plated
  • Gold Plated
  • One-Touch Lock
  • 300 V

  CAD ：

  2D

  Days to Ship:	6 Days or more

• 

  COMBICON Socket Header with Screw Flange (Vertical)

  MISUMI

  Phoenix contact make. Header for vertical mounting with built-in male contact.

  • Volume Discount

  • UL
  • CSA
  • For Signal
  • Sensor
  • DeviceNet
  • Tin-Plated
  • Gold Plated
  • Screw Lock
  • 300 V

  CAD ：

  2D

  Days to Ship:	8 Days or more

• 

  D5000 Series

  TE Connectivity

  A D-5000 Series connector for use with equipment main power supply lines.
  
  [Features]
  · High-current contact: Utilizes a box-shaped contact concept that has high torsional strength based on the Dynamic Series heritage and track record.
  · By using the same kind of newly developed copper alloy in the D-3000 Series, these connectors have excellent elasticity and conductivity characteristics with reliable receptacles and contacts.
  · The silver-plated type D-5000α Series has also been added to cover even higher current ranges.
  · The contacts can be selected to match the application.
  · Sequential contact: Allows sequential coupling to initially ground charged static electricity prior to contact coupling.
  · The long tab was developed for sequential coupling of tab contacts.
  · By using this long tab in combination with the regular tab contacts, it is possible to construct a sequential connection environment.
  · High current tines (lead): This type of tine (lead) mounts to a circuit board.
  · A newly developed twin lead type.
  · This product secures a large joining area with PCBs. Therefore, this enables a reliable pattern and connector connection.
  · IP20 (finger safety protection): The reverse-mount type D-5300 is recommended for applications with live equipment components.
  · By using a housing that can house the equipment (panel side) receptacles and contacts, the equipment connector satisfies the IP20 standard.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	6 Days or more

• 

  D2000 Series

  TE Connectivity

  The D-2000 Series remains small while satisfying specifications for industrial equipment.
  
  [Features]
  Twist-resistant terminal and housing structure: The box shaped recessed contacts are twist-resistant. The housing slits also prevent diagonal mating. This contributes to increased reliability.
  Effective mating length: By securing a long and effective mating length, the demands of industrial equipment can be met with high reliability.
  Applicable wires: This product can be used with AWG18 wires that are widely used in the industrial equipment sector.
  · Lock filling: A distinct locking sound and vibration are transferred to the worker when mating the connector. This makes it possible to complete work without coupling errors (half-mating) even when working in low-visibility environments.
  · Keying: The keying (slit) in the housing is provided to prevent coupling errors by distinguishing X keys from Y keys. Additional key patterns can be created by using a keying plug.
  · Center locking format: When high-density signal line mountings on circuit boards are required, the footprint on the circuit board can be minimized by mounting narrow-pitch connectors.
  · Drawer type: The drawer type has been developed so that each side of the connector has a floating construction. This is as an application that is aimed toward meet the requirements of blind mate connections. The maximum number of pins for the Series is 50P. Using this connector unit-to-unit blind mate connections are possible.
  · Hybrid type: This type can house the signal lines in the D-2000 contacts and the power line in the D-3000 contacts. The D-2600 Series can bundle the signal and power lines into a single connector. This contributes to the footprint of the circuit board and improve maintainability.

  • Volume Discount

  CAD ：

  2D

  Days to Ship:	6 Days or more

• 

  NH Connector【50 Pieces Per Package】

  JST

  The post with base has three types: top, side and bottom. Electrical entry is possible in three directions: at right angles to the board (up or down) or parallel to the board.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  PA connector

  JST

  Strong lock-type connector that supports high-density mounting by reducing the area the circuit board occupies.

  • Volume Discount

  Days to Ship:	6 Days or more

• 

  PH Connector【1,000 Pieces Per Package】

  JST

  This slim, low profile connector has been designed in response to requirements for higher density internal wiring.

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  KK® Interconnection System Wafer Angle Type (5046)

  Molex

  [Features]
  An ever-popular Molex connector for wire-to-circuit board connections. Angled type. (Mating housing: 5051/51191)

  • Volume Discount

  Days to Ship:	6 Days or more

• 

  MicroBlade^TM 2.00 mm Pitch Circuit Board Angle Wafer (51005)

  Molex

  [Features]
  A highly-reliable Molex product with a box type terminal and a straight and right angled flexible design. Angle type (mating housing: 51004)

  • Volume Discount

  Days to Ship:	6 Days or more

• 

  MicroClasp® 2.0 mm Pitch Circuit Board Wafer (55935)

  Molex

  [Features]
  A space saving Molex product that offers easier removal than other similar 2.00 mm (.079") and 2.50 mm (.098") pitch wire-to-circuit board connection systems. Angle type (mating housing: 51382)

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  MicroClasp® 2.0 mm Pitch Circuit Board Wafer (55959)

  Molex

  [Features]
  A space-saving Molex product that offers easier removal than other similar 2.00 mm (.079") and 2.50 mm (.098") pitch wire-to-circuit board connection systems. Angle type (mating housing: 51353).

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Micro-Fit 3.0 Connector (43045)

  Molex

  [Features]
  · Molex 3.00 mm pitch connector. Available in a variety of wire-to-wire, wire-to-board and board-to-board coupling configurations and number of pins.
  · Maximum rated current: 5.0 A. Brand name compatible products are also available. A header for boards (compatible housing: 43025).
  [Specifications changed in June 2015. Gloss plating ⇒ non-gloss plating. This eliminates the terminal gloss. There are no changes in the specifications.]

  • Volume Discount

  Days to Ship:	8 Days or more

• 

  Mini-Fit Jr.™ Header Angle (5569)

  Molex

  Molex connectors for wire-to-wire and board-to-board are available in both single row and double row types. A power connector for a maximum rated current of 13.0 A. Angled type. (Mating housing: 5557)

  • Volume Discount

  Days to Ship:	6 Days or more

• 

  Mini-Lock^TM 2.50 mm Pitch Wire-to-Circuit Board Wafer (53426)

  Molex

  Molex types are available in both straight and right angled types. Wire-to-wire optional parts are also available. This product has a high mating workability on the fitting guide wall. Angle type (Mating housings: 51102 / 51103 / 51163)

  • Volume Discount

  Days to Ship:	6 Days or more

• 

  PicoBlade^TM 1.25 mm Pitch Circuit Board Wafer (53048)

  Molex

  A number of wire-to-circuit board and wire-to-wire optional extra Molex products available. There are variations in header of both the types: Surface mount type and through-hole type. Angle type (mating housing: 51021)

  • Volume Discount

  Days to Ship:	6 Days or more

• 

  Sherlock 2.00 mm Pitch Board Header (35363)

  Molex

  A Molex 1‑row, wire-to-board connector. Straight and right-angled types are available. A wide locking latch for coupling stability and good workability. Angled type (compatible housing: 35507)

  • Volume Discount

  Days to Ship:	6 Days or more

• 

  SPOX^TM Wafer, Angle (5268)

  Molex

  [Features]
  The Molex-manufactured Spox family of wire-to-board connectors have a mating structure that works within a pitch range of 2.50 mm to 5.08 mm. Angled. (Mating housing: 5264)

  • Volume Discount

  Days to Ship:	6 Days or more

• 

  Mini CT Connector【1,800 Pieces Per Package】

  TE Connectivity

  [Features]
  • This is a Tyco Electronics (TE) mini CT series AC/DC 50 connector with a 1.50-mm pitch.

  • Volume Discount

  Days to Ship:	Quote

• 

  Male Header with Solder Pin/733 Series, Grade 1/Right Angle/2.5mm Pitch

  WAGO

  [Features]
  　• Can be horizontally or vertically mounted on a printed circuit board using a header with right angle solder pins.
  　• Model that makes incorrect insertion impossible: Only matches with the same number of terminals can be latched.
  　• An accessory coding key can be attached.

  • Volume Discount

  Days to Ship:	6 Days or more

• 

  Male Header with Solder Pin/734 Series Grade 1/Right Angle/3.81mm Pitch

  WAGO

  [Features]
  　• Can be horizontally mounted onto a printed circuit board using right-angle solder pins.
  　• Maximum rated current of 10 A is possible using a 1 x 1 mm pin size.
  　• Incorrect insertion is impossible.
  　• An accessory coding key can be attached.

  • Volume Discount

  Days to Ship:	6 Days or more

Loading...