(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Ultrasonic Thickness Meter, AD-3255 Series
Click this image to zoom it.
Move the mouse over the image to zoom
- Volume Discount
[Features]
· This product can be used to measure the thickness of a wide range of materials such as metal, glass, plastic, ceramic, epoxy, etc.
· This single unit covers a wide measurement range (0.8 to 300 mm) with a display resolution of 0.01 mm (display can be switched between 0.01 mm and 0.1 mm).
· Includes a scan mode to measure the smallest thickness detected within a wide range.
· 3 types of probes can be used to accommodate different applications.
· Thickness can be measured through a coating* (when using the AD-3255-04, sold separately).
· It is possible to measure the thickness of the object to be measured excluding the thickness of any paint or coating using echo/echo mode.
· Zero point adjustment of probes is supported. Includes 4 mm-equivalent test piece.
· Probes can be replaced.
· Supports sound speed adjustment.
· 1-point adjustment, 2-point adjustment and adjustment via numerical input are supported. Both setting and adjustment data are committed to the device's memory.
· Display of coupling state as well as verification of the contact state are supported.
· Remaining battery power can be displayed.
· When the batteries are exhausted, the battery indicator will flash.
· Equipped with battery-saving auto power off function.
· If the device is not used for approx. 5 minutes, the display will flash for 20 seconds and the power will turn off automatically.
· Backlight function allows easy viewing of values even in dark environments.
* Thickness measurement through a coating can be performed provided that the coating thickness is no greater than 1 mm and the ratio of the coating thickness to the thickness of the object being measured is at least 1:8.
· However, measurement may not be possible depending on the type of coating present and the state of the object being measured.
· Additionally, coating thickness can not be measured.
(i)Caution
- Image is of the main body.
Basic Information
| Product Model | Film Thickness Gauge | Measurement range(µm) | 7 MHz probe: 0.8 to 200.0, 5 MHz probe: 1.0 to 300.0, 2.0 to 300.0, 4.0 to 30.0 (*measured over coating) | Measurement accuracy | ±0.1 mm ±0.5% (measurement range: 0.8 to 50.0 mm), ±0.1 mm ±1.5% (measurement range: 50.1 to 300.0 mm) *Measurement and corresponding precision will depend on the state of the surface of the object being measured. |
|---|---|---|---|---|---|
| Display Resolution(mm) | 0.01 mm / 0.1 mm selection supported (note that display resolution is 0.1 mm at 200.1 mm or greater) | Sound Speed Setting Range(m/s) | 1,000 to 9,999 | Display | 0.65 to 600.0 mm |
| Mass(g) | Approx. 160 (dry cell batteries not included) | Measuring method | Ultrasonic pulse reflection method | Unit of measurement | mm |
| Power Supply | AA alkaline batteries × 2 | Battery life | Continuous operation of 30 hours or longer (at 25°C, backlight off and 4 mm measurement) | Width(mm) | 73 |
| Depth(mm) | 32 | Height(mm) | 143 | Temperature Accuracy Guarantee Range(°C) | 5 to 40 |
| Accessory | 7 MHz probe, AD-3255-02 (standard probe) × 1 pc., 4 mm-equivalent test piece AD-3255-01 × 1 pc., carrying case × 1 pc., strap × 1 pc., empty bottle for contact medium × 1 pc., instruction manual × 1 pc. | Operating Temperature and Humidity Range | 0 to 50°C, 85% RH or less (no condensation) |
Please check the type/dimensions/specifications of the part AD-3255 in the Ultrasonic Thickness Meter, AD-3255 Series series.
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
Tech Support
- Technical Support
- Tel：+52-442-672-7661 ext. 2 then wait and dial 4
E-mail: soportetecnico@misumimex.com - Mon. - Fri. 8 a.m. - 6 p.m.
- Technical Inquiry
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy