(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Socket Wrench Set TS-2465M

Socket Wrench Set TS-2465M
  • Volume Discount

•Single Item / Set : Set Product
•Use : Manual Operation
•Flat Width (Dimension S) : 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 3, 30, 32, 4, 5, 5.5, 6, 7, 8, 9, Distortion factor: 0.02% or less (500 Hz to 20 kHz), 0.05% or less (100 Hz - 100 kHz) (10x range for 100 Hz and 1x range for 100 kHz), 0.3% or less (50 Hz to 200 kHz), 0.5% or less (20 Hz - 500 kHz), 1.5% or less (10 Hz to 1 MHz), Output frequency range: 10 Hz to 1 MHz (5 ranges), Output waveforms: square wave and sine wave, Output amplitude: for sine wave, 5 Vrms or more (when load is 600 +¬)/for square wave, 10 Vpp or more (no load), Output frequency accuracy: dial accuracy -¦(3% + 1 Hz), (accuracy for dial 10 and 100 places), Output impedance: approx. 600 +¬, Attenuator: 0, -10, -20, -30, -40, -50 (dB) (when the following applies: six steps, accuracy -¦1 dB, and load 600 +¬), Start-up and shut down time/symmetry: 200 ns or less/-¦5% (when 1 kHz, at maximum output)
For complete product overview and details on Socket Wrench Set TS-2465M, see the sections below:

Part Number

Configured Part Number is shown.

TS-2465M

Part Number
TS-2465M
Part NumberMinimum order quantityVolume DiscountDays to Ship
1 Piece(s)Available

11 Days or more

Loading...

  1. 1

Basic Information

Single Product/Set Classification Set Product Application For handwork Insertion Angle (Shaft measurement when electric drill is involved) (mm) 9.5 / 12.7 / 6.35
Width across flat dimension (S Measurement) 10 / 11 / 12 / 13 / 14 / 15 / 16 / 17 / 18 / 19 / 20 / 21 / 22 / 23 / 24 / 3 / 4 / 5 / 6 / 7 / 8 / 9 / 26 / 27 / 5.5 / 30 / 32 Product Width(mm) 477 Product Height(mm) 58
Product Depth(mm) 290 Product Weight(g) 7500 Content Quantity(Point) 65
Set Contents Accessories 6.35 mm insertion angle (Socket <4, 5, 5.5, 6, 7, 8, 9, 10, 11, 12, 13 mm>, 100 mm extension bar, universal joint, ratchet handle), 9.5 mm insertion angle (socket <8, 9, 10, 11, 12, 13, 14, 15, 17, 19 mm>, deep socket <10, 12, 14, 17 mm>, hex bit socket <3, 4, 5, 6, 8, 10, and 12 mm>, hexalobular bit socket , 150 mm extension bar, universal joint, ratchet handle), 12.7 mm insertion angle (socket <12, 13, 14, 16, 17, 18, 19, 20, 21, 22, 23, 24, 26, 27, 30, 32 mm>, 150 mm extension bar, universal joint, ratchet handle, slide head handle)

Please check the type/dimensions/specifications of the part TS-2465M in the Socket Wrench Set TS-2465M series.

Additional Products in this Category

Tech Support