(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Signal Gauge

Signal Gauge
  • Volume Discount

The spindle has excellent durability due to the bearing equipped on its moving part. The floating circuit design blocks other leakage current.

PDF

Part Number

Configured Part Number is shown.

 
Part Number
S-5
S-9
SC-2A
Part NumberMinimum order quantityVolume DiscountDays to Ship Maximum Measurement Length (Range Selection)
(mm)
Scale interval minimal display
(mm)
Measuring Range
(mm)
Indication error
(mm)
Movable Range of Spindle Holding Method Dial Gauge for Setup Precautions for Use Mass
(g)
1 Piece(s)Available

10 Days or more

0–10.001±0.05 / 0.1±0.0023mmφ8 mm Stem (Optional: Ear Clasp Rear Cover GB-1A φ6.5 Holes)-Please be aware that using 10-20 mA of direct current will considerably hasten contact point degradation due to photocoupler drive, etc.180
1 Piece(s)Available

10 Days or more

1.1~50.05±1.5 / 3±0.0254mmφ8 mm Stem (Optional: Ear Clasp Rear Cover GB-1A φ6.5 Holes)-Please be aware that using 10-20 mA of direct current will considerably hasten contact point degradation due to photocoupler drive, etc.180
1 Piece(s)Available

10 Days or more

1.1~5-3(Contact sensitivity) 0.00510mmφ8 mm Stem Only107F・5FPlease be aware that using 10-20 mA of direct current will considerably hasten contact point degradation due to photocoupler drive, etc. SC-2A is a COM terminal body ground. (If other devices are leaking current, please attach gauge in an electronically floating manner.) SC-2A Type can be set from a free spindle configuration to 3 mm. SC-2A Type for protecting the spindle over 3 mm can be set from a free spindle configuration to 3 mm. SC-2A Type for protecting the spindle over 3 mm requires that the dust prevention cap be affixed when using after the gauge is removed and the tolerance settings are complete.150

Loading...

  1. 1

Basic Information

Application Standard Type Display Method Dial Scale type Continuous Scale
Output terminal for measuring data: with or without Available Measurement Force (Equal to or Less Than)(N) 1.2N Contact Capacity MAX DC24V 20mA
Standard for number of steps -NG/OK/+NG, 3 Stages Cord Length(m) 2 Operating Temperature 0–60°C
Option Cord Length 5 m/10 m Features The spindle has excellent durability due to the bearing equipped on the movable part of the spindle. The floating current design blocks other leakage current.

Additional Products in this Category

Tech Support