(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Flow Sensor PFMV5 Series
- Volume Discount
A flow sensor made by SMC.
[Features]
· Suction verification of very small work pieces
· Repeatability: ±2% F.S.
· Response speed of 5 ms or less, withstand pressure of 500 kPa
· Grease-free
· Flexible cable
· Reduced piping space
Mountable in space-saving location since straight piping length is not required
(i)Caution
- Refer to the manufacturer's catalog for specification and material details.
- CAD data is not available for some model numbers.
- Product images may be representative. Please refer to the manufacturer's catalog for shape details.
Specifications of Flow Sensor PFMV5 Series
External appearance of PFMV5 Series
Application of PFMV5 Series
- Confirmation of suction of small parts
- Suitable for small nozzles
- It can detect nozzle clogging and crushing
- The sensor is installed as a manifold
- Sensors can be mounted near the pad
- It is possible to easily check the presence or absence of pinholes in molded products
- Seating can be confirmed depending on the flow rate
Dimensions
(Units: mm)
Dimensional drawing of PFM5 Series
* When piping the flow sensor, use a wrench on the specified body part. Fitting tightening torque: 1.0 to 1.5 N·m
Dimensional drawing of one side bracket attached
Dimensional drawing of both side brackets attached
* The dimensional drawing is for PFMV5□□-1, but the same dimensions apply for PFMV5□□F-1.
Specifications
| Model | PFMV505 | PFMV510 | PFMV530 | PFMV505F | PFMV510F | PFMV530F | |
|---|---|---|---|---|---|---|---|
| Fluid | Dry air, N2 (Air quality classes are JIS B 8392-1 1.1.2 to 1.6.2:2003, ISO8573-1 1.1.2 to 1.6.2) | ||||||
| Rated flow rate range (flow range) *1) | 0 to 0.5 L/min | 0 to 1 L/min | 0 to 3 L/min | -0.5 to 0.5 L/min *2) | -1 to 1 L/min *2) | -3 to 3 L/min *2) | |
| Accuracy | ±5% F.S. *3) | ||||||
| Repeatability | ±2% F.S. *3) | ||||||
| Pressure characteristics (0 kPa reference *4)) | ±2%F.S. (0 to 300 kPa) ±5%F.S. (-70 to 0 kPa) | ||||||
| Temperature characteristics (reference: 25°C) | ±2%F.S. (15 to 35℃) ±5%F.S. (0 to 50℃) | ||||||
| Rated pressure range *5) | -70 kPa to 300 kPa | ||||||
| Operating pressure range *6) | -100 kPa to 400 kPa | ||||||
| Withstand pressure | 500 kPa | ||||||
| Analog Output (Non-linear output) | Output voltage: 1 to 5 V, output impedance: Approx. 1 kΩ | ||||||
| Response Time | 5 ms or less (90% response) | ||||||
| Power supply voltage | 12 to 24 V DC ±10% (with polarity protection) | ||||||
| Current Consumption | 16 mA or less | ||||||
| Environment | Protective Enclosure | IP40 | |||||
| Operating Fluid Temperature | 0 to 50℃ (No freezing or condensation) | ||||||
| Operating temperature range | 0 to 50℃ (No freezing or condensation) | ||||||
| Storage temperature range | -10 to 60℃ (No freezing or condensation) | ||||||
| Operating Humidity Range | 35 to 85%R.H. (No condensation) | ||||||
| Storage Humidity Range | 35 to 85%R.H. (No condensation) | ||||||
| Withstand Voltage | 1,000 V AC for 1 min. between terminals and housing | ||||||
| Insulation Resistance | 50 MΩ or more (500 V DC measured via insulation resistance tester) between terminals and housing | ||||||
| Port Size | M5 × 0.8 (Tightening torque: 1 to 1.5 N⋅m) | ||||||
| Wetted parts material | PPS,Si,Au,SUS316,C3604 (Electrolytic nickel plating) | ||||||
| Standards | CE UL,CSA | ||||||
| Lead | 3 core vinyl flexible cable ø2.6 (diameter: 2.6 mm), 0.15 mm^2, 2 m | ||||||
| Weight | 10 g (It does not include lead) | ||||||
*1) Flow rates described in the specifications are the values at standard condition.
*2) The analog output shows 3 V when the flow rate is 0, changes to 5 V when the flow direction is from IN to OUT, and changes to 1 V when the direction is from OUT to IN.
*3) % F.S. in the table is based on the full scale of analog 4 V (1-5 V).
*4) 0 kPa means open air.
*5) It indicates the pressure range that satisfies the product specifications.
*6) It indicates the operable pressure range.
*7) Please contact the manufacturer for wiring.
*8) Even in striving to improve the quality, products may have small scratches, smears or variations in display color and brightness, etc., that do not affect the performance, verified as conforming products.
Internal Circuit and Connection
-1 Structural drawing of analog voltage output
| Conductor | Nominal cross-sectional area | AWG26 |
|---|---|---|
| Outer diameter | 0.58 mm | |
| Insulator | Outer diameter | 0.88 mm |
| Hue | Brown/blue/black | |
| Sheath | Material | Oil and heat resistant PVC |
| Finishing outer diameter | 2.6 | |
Recommended pneumatic circuit example
Circuit example for compressed air
Recommended fitting
Quick-Connect Fitting / KQ2 Series
| Model | Tubing outer diameter mm | Port Size | Model |
|---|---|---|---|
| Male connector | 4 | M5 × 0.8 | KQ2H04-M5A |
| Male elbow | KQ2L04-M5A |
Miniature Pipe Fitting / M Series
| Model | Tubing outer diameter mm | Port Size | Model |
|---|---|---|---|
| Barb fitting for nylon tubes | 4 | M5 × 0.8 | M-5AN-4 |
| 6 | M-5AN-6 |
Structural drawing of wetted part
Structural drawing of PFMV5 Series
| Number | Name | Material |
|---|---|---|
| 1 | Plumbing Fitting | C3604 (electroless nickel plated) |
| 2 | Mesh fixing screw | |
| 3 | Mesh | SUS316 |
| 4 | Body | PPS |
| 5 | Circuit board | GE4F |
| 6 | Sensor chip | Si, Au |
Pressure Loss
Pressure loss of PFMV505 (F)-1
Pressure loss of PFMV510 (F)-1
Pressure loss of PFMV530 (F)-1
- *Refer to the SMC catalog for product information other than what is detailed above.
- *The product image is a representative image only.
| Part Number |
|---|
| PFMV505-1-A |
| PFMV505F-1-A |
Loading...
Basic Information
| Type | Flow Sensor | Fluid Type | Air / Nitrogen Gas | Sensor, Monitor Structure | Integrated shape |
|---|---|---|---|---|---|
| Output Method | Analog | Analog Output Specification | Voltage | Pipe Port Type | One-Touch Couplings |
| Number of Output Points | 1 | Analog Voltage Output(V) | 1-5V | IP | IP40 |
| Bracket | With L-type bracket | Lead Wire | Vinyl flexible cable, 3 cores, ø2.6, 0.15 mm², 2 m | Rated Pressure Range | -70 kPa to 300 kPa |
| Instruction Manual | With operation manual (Japanese and English) | Accuracy(%F.S.) | ±5% F.S. |
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Voltage Monitor for PFMV5, PFMV3 Series
- 2-Color Display High-Precision Digital Pressure Switch ZSE40A(F)/ISE40A Series
- Thin-Type Digital Pressure Switch ZSE10(F)/ISE10 Series
- 3-Screen Display High-Precision Digital Pressure Switch ZSE20(F)/ISE20 Series
- Pressure Switch Reed Switch Type IS10 Series
- Pressure Switch With Status LED
- 3-Color Display PVC Piping Compatible Digital Flow Switch PF3W Series
- 3-Color Display Digital Flow Switch For Large Flow PF3A7□H Series
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy