(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
TSC Series Carbide Tapered End Mill, 2-Flute/Regular Model (TSC-TEM2R5-2)
Click this image to zoom it.
Move the mouse over the image to zoom
- Volume Discount
- Price Reduction
Powerful support with the rich variations to choose from and price reduction
- TS
- General Steel
- 2 Flutes
- R (Regular)
Part Number
Configured Part Number is shown.
TSC-TEM2R5-2
Loading...
Specifications
| Model Number | Flute Length ℓ |
Large Tip Diameter D1 |
Overall Length L |
Shank Diameter d |
||
| Outer Diameter D |
Single Angle θ |
|||||
| TSC-TEM2R | 0.5 | 1° | 2 | 0.57 | 50 | 4 |
| 2° | 2 | 0.64 | 50 | 4 | ||
| 3° | 2 | 0.71 | 50 | 4 | ||
| 5° | 2 | 0.85 | 50 | 4 | ||
| 10° | 2 | 1.21 | 50 | 4 | ||
| 15° | 2 | 1.57 | 50 | 4 | ||
| 1 | 1° | 4 | 1.14 | 50 | 4 | |
| 2° | 4 | 1.28 | 50 | 4 | ||
| 3° | 4 | 1.42 | 50 | 4 | ||
| 5° | 4 | 1.70 | 50 | 4 | ||
| 6° | 4 | 1.84 | 50 | 4 | ||
| 7° | 4 | 1.98 | 50 | 4 | ||
| 10° | 4 | 2.41 | 50 | 4 | ||
| 12° | 4 | 2.70 | 50 | 4 | ||
| 15° | 3 | 2.60 | 50 | 4 | ||
| 20° | 3 | 3.18 | 50 | 4 | ||
| 30° | 2.6 | 4.00 | 50 | 4 | ||
| 1.5 | 1° | 6 | 1.71 | 50 | 4 | |
| 2° | 6 | 1.92 | 50 | 4 | ||
| 3° | 6 | 2.13 | 50 | 4 | ||
| 5° | 6 | 2.55 | 50 | 4 | ||
| 6° | 6 | 2.76 | 50 | 4 | ||
| 7° | 6 | 2.97 | 50 | 4 | ||
| 10° | 6 | 3.62 | 50 | 4 | ||
| 12° | 6 | 4.05 | 50 | 4 | ||
| 15° | 5 | 4.18 | 50 | 4 | ||
| 20° | 5 | 5.14 | 50 | 6 | ||
| 30° | 3.9 | 6.00 | 50 | 6 | ||
| 2 | 0.5° | 8 | 2.14 | 50 | 4 | |
| 1° | 8 | 2.28 | 50 | 4 | ||
| 2° | 8 | 2.56 | 50 | 4 | ||
| 3° | 8 | 2.84 | 50 | 4 | ||
| 5° | 8 | 3.40 | 50 | 4 | ||
| 6° | 8 | 3.68 | 50 | 4 | ||
| 7° | 8 | 3.96 | 50 | 4 | ||
| 10° | 8 | 4.82 | 50 | 6 | ||
| 12° | 8 | 5.40 | 50 | 6 | ||
| 15° | 7 | 5.75 | 50 | 6 | ||
| 20° | 5.5 | 6.00 | 50 | 6 | ||
| 30° | 4 | 6.62 | 50 | 6 |
| Model Number | Flute Length ℓ |
Large Tip Diameter D1 |
Overall Length L |
Shank Diameter d |
||
| Outer Diameter D |
Single Angle θ |
|||||
| TSC-TEM2R | 3 | 0.5° | 12 | 3.21 | 60 | 4 |
| 1° | 12 | 3.42 | 60 | 4 | ||
| 2° | 12 | 3.84 | 60 | 4 | ||
| 3° | 12 | 4.26 | 60 | 4 | ||
| 5° | 12 | 5.10 | 60 | 6 | ||
| 6° | 12 | 5.52 | 60 | 6 | ||
| 7° | 12 | 5.95 | 60 | 6 | ||
| 10° | 12 | 7.23 | 60 | 8 | ||
| 12° | 11 | 7.68 | 60 | 8 | ||
| 15° | 11 | 8.89 | 60 | 10 | ||
| 20° | 9 | 9.55 | 60 | 10 | ||
| 30° | 5 | 8.77 | 60 | 10 | ||
| 4 | 0.5° | 16 | 4.28 | 60 | 4 | |
| 1° | 16 | 4.56 | 60 | 6 | ||
| 2° | 16 | 5.12 | 60 | 6 | ||
| 3° | 16 | 5.68 | 60 | 6 | ||
| 5° | 16 | 6.80 | 60 | 6 | ||
| 6° | 16 | 7.36 | 60 | 8 | ||
| 7° | 16 | 7.93 | 60 | 8 | ||
| 10° | 16 | 9.64 | 60 | 10 | ||
| 15° | 14 | 11.50 | 60 | 12 | ||
| 20° | 10 | 11.28 | 60 | 12 | ||
| 30° | 6 | 10.93 | 60 | 12 | ||
| 5 | 0.5° | 20 | 5.35 | 60 | 6 | |
| 1° | 20 | 5.70 | 60 | 6 | ||
| 2° | 20 | 6.40 | 60 | 6 | ||
| 3° | 20 | 7.10 | 60 | 8 | ||
| 5° | 20 | 8.50 | 60 | 8 | ||
| 6 | 0.5° | 24 | 6.42 | 70 | 6 | |
| 1° | 24 | 6.84 | 70 | 8 | ||
| 2° | 24 | 7.68 | 70 | 8 | ||
| 3° | 24 | 8.52 | 70 | 8 | ||
| 5° | 24 | 10.20 | 70 | 10 |
For Cutting Conditions, Refer to >>Click here.
More Information
● It has a TS film-coating with much greater oxidation resistance and hardness than conventional films, resulting in a longer operational life and is ideal for high speed machining / dry machining.
● The blade tip has a sharp edge allowing corner edges to also be machined.
Basic Information
| Model | Tapered Square | Work Material | General Steel / Heat-Treated Steel / High-Hardness Steel ~ HRC55 / Stainless Steel / Cast Iron / Aluminum / Copper | Number of Flutes(sheet) | 2 |
|---|---|---|---|---|---|
| Coating | For High Hardness (Silicone-Based) | Helix Angle (Θ) | Standard Helix (30 to 40°) |
Please check the type/dimensions/specifications of the part TSC-TEM2R5-2 in the TSC Series Carbide Tapered End Mill, 2-Flute/Regular Model series.
Specification/Dimensions
-
type
- TSC-TEM2R
-
Single Angle (θ)(Degree)
-
Outer Diameter (D)(φ)
-
Flute Length (ℓ)(mm)
-
Shank Diameter (d)(mm)
-
Overall Length (L)(mm)
Days to Ship
-
- All
- 8 Days or Less
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Products like this...
| Part Number |
|---|
| TSC-TEM2R0.5-2 |
| TSC-TEM2R0.5-3 |
| TSC-TEM2R0.5-5 |
| TSC-TEM2R5-3 |
| TSC-TEM2R5-5 |
| TSC-TEM2R6-0.5 |
Additional Products in this Category
- TSC Series Carbide Tapered Ball End Mill (for engraving), 1-Flute/Crescent Model
- TSC Series Carbide Tapered End Mill, 4-Flute/Regular
- Carbide Tapered End Mill NTE-4
- X Coated Taper Medium Blade End Mill NTEM-2X
- Carbide Air Wheel Solid Taper End Mill
- Carbide Solid Taper End Mill (Medium)
- Taper End Mill 2 Flutes
- Carbide Solid Tapered End Mill CSTE
Complementary Products
-
XAC Series Carbide High-helical End Mill for High-hardness Steel Machining, Multi-blade, 45° Torsion/Long Model
MISUMI Days to Ship : 8 Days or more
-
XAL Series Carbide Multi-functional Square End Mill, 4-Flute, 45° Torsion/Short Model
MISUMI Days to Ship : 8 Days or more
-
TSC Series Carbide End Mill for Runner Grooves, for Tapered Ball Runner Grooves/2-Flute
MISUMI Days to Ship : 8 Days or more
-
XAC Series Carbide High-helical End Mill, for High-hardness Steel Machining, Multi-blade, 45° Torsion/Regular Model
MISUMI Days to Ship : 8 Days or more
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy