(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.
Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.
Mon. - Fri. 8 a.m. - 6 p.m.
All Categories
Categories
- Automation Components
- Linear Motion
- Rotary Motion
- Connecting Parts
- Rotary Power Transmission
- Motors
- Conveyors & Material Handling
- Locating, Positioning, Jigs & Fixtures
- Inspection
- Sensors, Switches
- Pneumatics, Hydraulics
- Vacuum Components
- Hydraulic Equipment
- Spray Equipment And Accessories
- Pipe, Tubes, Hoses & Fittings
- Modules, Units
- Heaters, Temperature Control
- Aluminum Extrusions, Framing, Support & Posts
- Casters, Leveling Mounts, Posts
- Doors, Cabinet Hardware
- Springs, Shock Absorbers
- Adjustment/Fastening Components, Pins, Magnets
- Antivibration, Soundproofing Materials, Safety Products
- Fasteners
- Materials
- Wiring Components
- LAN Cables / Industrial Network Cables
- Equipment Specific Cables
- Cordsets
- Computer & AV Cables
- Wire/Cable
- Connector (General Purpose)
- Crimp Terminal Components
- Cable Organization
- Cable Gland Components
- Cable Bushing/Clip/Sticker
- Screw/Spacer
- Cable accessories
- Tube
- Electrical Conduits
- Duct/Wiring
- Electrical Wiring Tools
- Dedicated tools
- Soldering supplies
- Electrical & Controls
- Cutting Tools
- Carbide End Mill
- HSS End Mill
- Concrete Drill Bits
- Milling Cutter Insert / Holder
- Core Drill Bits
- Customized Straight Blade End Mill
- Dedicated Cutter
- Crinkey Cutters
- Turning Tool
- Drill
- Cutting Tool Accessories
- Screw Hole Related Tools
- Reamer
- Electric Drill Bits
- Chamfering, Centering Tool
- Hole Saws
- Magnetic Drill Press Cutters
- Step Drills
- Wood Drills & Cutters
- Processing Tools
- packing & logistics storage supplies
- Safety Products
- research and development & cleanroom supplies
- Press Die Components
- Plastic Mold Components
- Ejector Pins
- Sleeves, Center Pins
- Core Pins
- Sprue bushings, Gates, and other components
- Date Mark Inserts, Recycle Mark Inserts, Pins with Gas Vent
- Undercut, Plates
- Leader Components, Components for Ejector Space
- Mold Opening Controllers
- Cooling or Heating Components
- Accessories, Others
- Components of Large Mold, Die Casting
- Injection Molding Components
- Purging Agent
- Injection Molding Machine Products
- Accessories of Equipment
- Auxiliary Equipment
- Air Nippers
- Air Cylinders
- Air Chuck for Runner
- Chuck Board Components
- Frames
- Suction Components
- Parallel Air Chuck
- Special Air Chuck
- Mold Maintenance
- Heating Items
- Heat Insulation Sheets
- Couplers, Plugs, One-touch Joints
- Tubes, Hoses, Peripheral Components
Applications
Brands
- Webcode Seach | Series
-
#CODE
- Discontinued Products
Slim Press-fit Connector, Angle Model
Popular Low Price Angle harness.
- Space-saving
- PLC
- Pressure Welding
- Gold Plated
- Small Diameter
● Angle shape is used for easy maneuvering in narrow areas.
· Removal of CN1 is on the B-row side (Wide fitting side).
· When the mark tube has no printed custom number specified, the connector pin arrangement number is printed. Be careful not to forget to put the custom number on the supported device.
· Sheath peeling length can be designated as alteration service only for those with terminals or mark tubes.
· The exposed core parts of the thin cables have been fused together for protection.
Wiring and Wire Color Page >>Click here.
Component Page >>Click here.
Part Number
Configured Part Number is shown.
Specifications
| Specified Length (m) | ~ 0.9 | 1 ~ 4 | 4.1 ~ 50 |
| Tolerance | +20mm | +50mm | + 3% of Specified Length |
| Part Number |
|---|
| NFCN-SA-F-24-[0.2-50/0.1] |
| NFCN-SA-F-32-[0.2-50/0.1] |
| NFCN-SA-F-40-[0.2-50/0.1] |
| NFCN-SA-F-48-[0.2-50/0.1] |
| NFCN-SA-KS-24-[0.2-50/0.1] |
| NFCN-SA-KS-32-[0.2-50/0.1] |
| NFCN-SA-KS-40-[0.2-50/0.1] |
| NFCN-SA-RS-24-[0.2-50/0.1] |
| NFCN-SA-RS-32-[0.2-50/0.1] |
| NFCN-SA-RS-40-[0.2-50/0.1] |
| NFCN-SA-SB-24-[0.2-50/0.1] |
| NFCN-SA-SB-32-[0.2-50/0.1] |
| NFCN-SA-SB-40-[0.2-50/0.1] |
| NFCN-SA-SB-48-[0.2-50/0.1] |
| NFCN-SAS-F-24-[0.2-50/0.1] |
| NFCN-SAS-F-32-[0.2-50/0.1] |
| NFCN-SAS-F-40-[0.2-50/0.1] |
| NFCN-SAS-F-48-[0.2-50/0.1] |
| NFCN-SAS-KS-24-[0.2-50/0.1] |
| NFCN-SAS-KS-32-[0.2-50/0.1] |
| NFCN-SAS-KS-40-[0.2-50/0.1] |
| NFCN-SAS-RS-24-[0.2-50/0.1] |
| NFCN-SAS-RS-32-[0.2-50/0.1] |
| NFCN-SAS-RS-40-[0.2-50/0.1] |
| NFCN-SAS-SB-24-[0.2-50/0.1] |
| NFCN-SAS-SB-32-[0.2-50/0.1] |
| NFCN-SAS-SB-40-[0.2-50/0.1] |
| NFCN-SAS-SB-48-[0.2-50/0.1] |
| NFCN-SAT-F-24-[0.2-50/0.1] |
| NFCN-SAT-F-32-[0.2-50/0.1] |
| NFCN-SAT-F-40-[0.2-50/0.1] |
| NFCN-SAT-F-48-[0.2-50/0.1] |
| NFCN-SAT-FF-24-[0.5-5/0.1] |
| NFCN-SAT-FF-32-[0.5-5/0.1] |
| NFCN-SAT-FF-40-[0.5-5/0.1] |
| NFCN-SAT-FF-48-[0.5-5/0.1] |
| NFCN-SAT-KS-24-[0.2-50/0.1] |
| NFCN-SAT-KS-32-[0.2-50/0.1] |
| NFCN-SAT-KS-40-[0.2-50/0.1] |
| NFCN-SAT-RS-24-[0.2-50/0.1] |
| NFCN-SAT-RS-32-[0.2-50/0.1] |
| NFCN-SAT-RS-40-[0.2-50/0.1] |
| NFCN-SAT-SB-24-[0.2-50/0.1] |
| NFCN-SAT-SB-32-[0.2-50/0.1] |
| NFCN-SAT-SB-40-[0.2-50/0.1] |
| NFCN-SAT-SB-48-[0.2-50/0.1] |
| NFCN-SAY-F-24-[0.2-50/0.1] |
| NFCN-SAY-F-32-[0.2-50/0.1] |
| NFCN-SAY-F-40-[0.2-50/0.1] |
| NFCN-SAY-F-48-[0.2-50/0.1] |
| NFCN-SAY-FF-24-[0.5-5/0.1] |
| NFCN-SAY-FF-32-[0.5-5/0.1] |
| NFCN-SAY-FF-40-[0.5-5/0.1] |
| NFCN-SAY-FF-48-[0.5-5/0.1] |
| NFCN-SAY-KS-24-[0.2-50/0.1] |
| NFCN-SAY-KS-32-[0.2-50/0.1] |
| NFCN-SAY-KS-40-[0.2-50/0.1] |
| NFCN-SAY-RS-24-[0.2-50/0.1] |
| NFCN-SAY-RS-32-[0.2-50/0.1] |
| NFCN-SAY-RS-40-[0.2-50/0.1] |
Loading...
Compatible Wire
| Connector Type | Wire Size |
|---|---|
| Soldered Type | Loose wire of AWG23 ~ AWG30, or 0.2 mm2 ~ 0.05 mm2 |
| Pressure Welding Type | 1.27 mm Pitch Flat Cable AWG28, AWG30 * Loose wires cannot be used. (Fused cables can be used) |
Material / Finish
| Item | Material / Finish |
|---|---|
| Insulator | Polyester |
| Contact | Copper Alloy / Gold Plating |
Contact Arrangement Diagram
Electrical Properties
| Item | Characteristics | Conditions |
|---|---|---|
| Rated Current | 3 ADC (1 ADC for pressure welded type) or lower | Allowable current of single contact after coupling |
| Rated Voltage | 250 VAC or less | Allowable voltage within operating temperature range |
| Contact Resistance | 15 mΩ or less | Measured at 6 VDC, 0.3 A |
| Insulation Resistance | 1000 MΩ or more | Between terminals and between ground & terminal are measured at 500 VDC |
| Peak Voltage | 500 VAC / 1 min | No abnormality to be found when 500 VDC is applied for 1 minute to the same location as the insulation resistance measurement. |
| Operating Temperature Range | -55°C ~ +85°C | - |
Electrical Properties
| Item | Characteristics | Conditions |
|---|---|---|
| Insertion and Extraction Force Per Single Pole | Insertion Force: 312 g or less, Extraction Force: 50 g or more | When male and female are inserted and extracted, the total extraction force is divided by each core number to convert into force per single pole |
| Vibration Resistance | No interruption to power supplies of 1 μs or more. Matching contact resistance. | After mounting of compatible electric wires, under conditions of DC current of 100 mA passing through the terminals, it will provide vibrations at a total amplitude of 1.5 mm and vibration frequency of 10 ~ 55 Hz (1 minute reciprocal) in right angled 3 directions for 2 hours. |
| Insertion and Removal Durability | Contact resistance at 20 mΩ or less. Matching insertion and extraction force per single pole. | Perform insertion-extraction 500 times at a speed of 600 times / hour. |
Environmental Properties
| Item | Characteristics | Conditions |
|---|---|---|
| Temperature Resistance | Matching contact resistance, insulation resistance and peak voltage. | Performs 5 cycles of -55°C ±0.3 for 30 minutes, 25°C ±10.5 for 10 ~ 15 minutes, 85°C ±0.3 for 30 minutes and 25°C ±10.5 for 10 ~ 15 minutes consecutively. |
| Humidity Resistance | Matching contact resistance of 100 MΩ or more, insulation resistance and peak voltage. | Remove after placing in conditions of temperature 40 ±2°C and relative humidity of 90 ~ 95% for 96 hours, remove water droplets and then leave at room humidity conditions for between 1 and 2 hours. |
| Corrosion Resistance | Contact resistance at 20 mΩ or less. | After testing for 48 hours at saltwater concentration of 5% and temperature of 35°C, wash salt encrustation off with water and let dry. |
Connector x Hood Combination Table
| Hood Connector | Resin Hood | Zinc Die-cast Hood | ||||
|---|---|---|---|---|---|---|
| Standard Screw | Long Screw | Hood for Relay | ||||
| FCN-360C0**-B | FCN-360C0**-E | FCN-360C0**-C | FCN-360C040-H-E | |||
| Male | Solder Type Connectors | FCN-361P0**-AU | ○ | ○ (8-, 16-core not available) | ○ (8-, 16-core not available) | ○ (40-core only) |
| Female | Solder Type Connectors | FCN-361J0**-AU | ○ | ○ (8-, 16-core not available) | ○ (8-, 16-core not available) | ○ (40-core only) |
| Pressure Welding Type Connector | FCN-367J0**-AU-F | x | x | x | x | |
○ = Combination available x = Combination unavailable
・Connectors can be coupled if they have the same core numbers and are a combination of male <--> female. ･ When connecting hood to hood without using a relay hood, use a connecting fixing bracket.
Basic Information
| Connector type | FCN | Connector manufacturer | Fujitsu Limited | Connector shape | Angle |
|---|---|---|---|---|---|
| Processing method | Pressure Welding | Cable shape | Round | Hood | N/A |
| Hood screw | M2.6 Screw Lock | CN1 | Female | Cable Standard (UL / CSA) | UL |
| Twisted pair | Included | AWG | 28 | Special Notes | Please see the catalog for more information on mating surface and wiring direction. |
Specification/Dimensions
-
CN2
- Female
- Loose Wires
- Y Terminal
- End Piece
-
Number of cores
-
Cable Rated Voltage(V)
- 30
- 300
-
Shield
- 1 Layer
- 2 Layer
- N/A
-
Cable Color
- Black
- Navy
-
Environment Resistant
- N/A
- Oil-resistant
-
Bend Resistant
- Earthquake Resistant / Bending
- Flexible
- N/A
-
Cable Wiring (CN1 connector)
- Left Side
- Right Side
-
Cable Type
-
Specified Length(m)
-
CAD
- 2D
Specify Alterations
- The specifications and dimensions of some parts may not be fully covered. For exact details, refer to manufacturer catalogs .
Additional Products in this Category
- Square Cordsets - D-Sub Cable, with DDK/MISUMI Connector, Blue
- Misumi Original Hooded [Cable] with Nameplate
- Cable with FCN Connector Flat Cable Model
- General-purpose Connectors
- Generic EMI Countermeasures [Connectors]
- High EMI Countermeasures [Connectors]
- Extension Cable
- Discrete Wire Cable With Hooded Connector
Complementary Products
-
Circular Cordset - XS5/XS6 Series, Industiral Ethernet, M12 Connector
OMRON Days to Ship : 9 Days or more
-
Immediate Shipping, PCR Half Pitch Connector Harness (EMI Countermeasure)
MISUMI Days to Ship : 8 Days or more
-
Square Cordsets - D-Sub Connector, General Purpose, Value Price
MISUMI Days to Ship : 9 Days or more
![Misumi Original Hooded [Cable] with Nameplate](http://content.misumi-ec.com/image/upload/t_product_recommend_a/v1/p/jp/product/series/110500008540/110500008540_004.jpg?$product_recommend_a$)
How can we improve?
How can we improve?
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Customer Privacy Policy
Thank you for your cooperation.
While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.
Customer Privacy Policy