(!)Due to Microsoft's end of support for Internet Explorer 11 on 15/06/2022, this site does not support the recommended environment.

Our Business Hours:
Mon. - Fri. 8 a.m. - 6 p.m.

All Categories

Applications

inCAD Library

Brands

Brand List

Webcode Seach | Series: #CODE

Keyword suggestions

Part number suggestions

Discontinued Products

Need Help?

Order/Quote

Order

Order

/ Order
/ Order

Part Number Checker

Catalog Request

How can we improve?

How can we improve?

Comments

Name (Optional)

E-mail Address (Optional)

Tel (Optional)

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.

Customer Privacy Policy

Thank you for your cooperation.

While we are not able to respond directly to comments submitted in this form, the information will be reviewed for future improvement.
Please use the inquiry form.

Customer Privacy Policy

FCN Loose Wire with Hood Angle, Female

MISUMI

Space saving in drawers is possible with angle shape / straight connectors.TE type connector/hood use model

Connection in Boards
PLC
Solder
Gold Plated

● The angle shape is useful for easy maneuvering in narrow areas.
● Wires are available in a total of 5 colors, with yellow for AC, blue for DC, and red, white and black for multiple purposes.
● Mark tube printing is possible when a custom number is used.
● Supports sectional color changing of loose wires with "WEB Design Harness Plus."

· When the mark tube has no printed custom number specified, the connector pin arrangement number is printed. Be careful not to forget to put the custom number on the supported device.
· Hoods may not shut due to cable thickness, however, this does not affect product quality or performance.

Component Page >>Click here.

Part Number

Configured Part Number is shown.

Product specification
Part Numbers
Standard Specifications

Specifications

Loose Wire with Hood Angle:Related Image

Specified Length (m)	~ 0.9	1 ~ 4	4.1 ~ 10
Tolerance	+20mm	+50mm	+ 3% of Specified Length

* The tolerance of the specified length is as described above.

Connector Type	Shape Specification Type	Mating Surface and Wiring Direction	Outline Image Drawing	Wire Type	Number of Cores	Specified Length (m)

BHFCNA With Hood M2.6 Screw Lock Type Tyco Electronics	SAT (Female Angle) with Pin No. Insertion Mark Tube SBT (Female Angle) with Pin No. Insertion Mark Tube		Female Mark Tube Only	A Yellow B Blue C White D Black E Red UL1007 AWG24 Equivalent Product	40	0.2 ~ 10 Can be specified by 0.1m increments
	SAY (Female Angle / Y Terminal) with Pin No. Insertion Mark Tube SBY (Female Angle / Y Terminal) with Pin No. Insertion Mark Tube		Female Y Terminal
	SAR (Female Angle / Round Terminal) with Pin No. Insertion Mark Tube SBR (Female Angle / Round Terminal) with Pin No. Insertion Mark Tube		Female Round Terminal

More Information

: 30; 45; 60

Part Number
BHFCNA-SAT-A-40-[0.2-10/0.1]
BHFCNA-SAT-B-40-[0.2-10/0.1]
BHFCNA-SAT-C-40-[0.2-10/0.1]
BHFCNA-SAT-D-40-[0.2-10/0.1]
BHFCNA-SAT-E-40-[0.2-10/0.1]
BHFCNA-SBT-A-40-[0.2-10/0.1]
BHFCNA-SBT-B-40-[0.2-10/0.1]
BHFCNA-SBT-C-40-[0.2-10/0.1]
BHFCNA-SBT-D-40-[0.2-10/0.1]
BHFCNA-SBT-E-40-[0.2-10/0.1]

Minimum order quantity	Days to Ship	CN2	Cable Color	Cable Wiring (CN1 connector)	Cable Type	Specified Length (m)
1 Piece(s)	9 Days or more	End Piece	Yellow	Left Side	A	0.2 ～ 10
1 Piece(s)	9 Days or more	End Piece	Blue	Left Side	B	0.2 ～ 10
1 Piece(s)	9 Days or more	End Piece	White	Left Side	C	0.2 ～ 10
1 Piece(s)	9 Days or more	End Piece	Black	Left Side	D	0.2 ～ 10
1 Piece(s)	9 Days or more	End Piece	Red	Left Side	E	0.2 ～ 10
1 Piece(s)	9 Days or more	End Piece	Yellow	Right Side	A	0.2 ～ 10
1 Piece(s)	9 Days or more	End Piece	Blue	Right Side	B	0.2 ～ 10
1 Piece(s)	9 Days or more	End Piece	White	Right Side	C	0.2 ～ 10
1 Piece(s)	9 Days or more	End Piece	Black	Right Side	D	0.2 ～ 10
1 Piece(s)	9 Days or more	End Piece	Red	Right Side	E	0.2 ～ 10

Compatible Wire

Connector Type	Wire Size
Soldered Type	Loose wire of AWG23 ~ AWG30, or 0.2 mm2 ~ 0.05 mm2
Pressure Welding Type	1.27 mm Pitch Flat Cable AWG28, AWG30 * Loose wires cannot be used. (Fused cables can be used)

Material / Finish

Item	Material / Finish
Insulator	Polyester
Contact	Copper Alloy / Gold Plating

Contact Arrangement Diagram

Electrical Properties

Item	Characteristics	Conditions
Rated Current	3 ADC (1 ADC for pressure welded type) or lower	Allowable current of single contact after coupling
Rated Voltage	250 VAC or less	Allowable voltage within operating temperature range
Contact Resistance	15 mΩ or less	Measured at 6 VDC, 0.3 A
Insulation Resistance	1000 MΩ or more	Between terminals and between ground & terminal are measured at 500 VDC
Peak Voltage	500 VAC / 1 min	No abnormality to be found when 500 VDC is applied for 1 minute to the same location as the insulation resistance measurement.
Operating Temperature Range	-55°C ~ +85°C	-

Electrical Properties

Item	Characteristics	Conditions
Insertion and Extraction Force Per Single Pole	Insertion Force: 312 g or less, Extraction Force: 50 g or more	When male and female are inserted and extracted, the total extraction force is divided by each core number to convert into force per single pole
Vibration Resistance	No interruption to power supplies of 1 μs or more. Matching contact resistance.	After mounting of compatible electric wires, under conditions of DC current of 100 mA passing through the terminals, it will provide vibrations at a total amplitude of 1.5 mm and vibration frequency of 10 ~ 55 Hz (1 minute reciprocal) in right angled 3 directions for 2 hours.
Insertion and Removal Durability	Contact resistance at 20 mΩ or less. Matching insertion and extraction force per single pole.	Perform insertion-extraction 500 times at a speed of 600 times / hour.

Environmental Properties

Item	Characteristics	Conditions
Temperature Resistance	Matching contact resistance, insulation resistance and peak voltage.	Performs 5 cycles of -55°C ±0.3 for 30 minutes, 25°C ±10.5 for 10 ~ 15 minutes, 85°C ±0.3 for 30 minutes and 25°C ±10.5 for 10 ~ 15 minutes consecutively.
Humidity Resistance	Matching contact resistance of 100 MΩ or more, insulation resistance and peak voltage.	Remove after placing in conditions of temperature 40 ±2°C and relative humidity of 90 ~ 95% for 96 hours, remove water droplets and then leave at room humidity conditions for between 1 and 2 hours.
Corrosion Resistance	Contact resistance at 20 mΩ or less.	After testing for 48 hours at saltwater concentration of 5% and temperature of 35°C, wash salt encrustation off with water and let dry.

Connector x Hood Combination Table

Hood Connector			Resin Hood			Zinc Die-cast Hood
			Standard Screw	Long Screw	Hood for Relay	Zinc Die-cast Hood
			FCN-360C0**-B	FCN-360C0**-E	FCN-360C0**-C	FCN-360C040-H-E
Male	Solder Type Connectors	FCN-361P0**-AU	○	○ (8-, 16-core not available)	○ (8-, 16-core not available)	○ (40-core only)
Female	Solder Type Connectors	FCN-361J0**-AU	○	○ (8-, 16-core not available)	○ (8-, 16-core not available)	○ (40-core only)
Female	Pressure Welding Type Connector	FCN-367J0**-AU-F	x	x	x	x

○ = Combination available x = Combination unavailable

・Connectors can be coupled if they have the same core numbers and are a combination of male <--> female.
･ When connecting hood to hood without using a relay hood, use a connecting fixing bracket.

Basic Information

Connector type	FCN	Connector manufacturer	AMP	Connector shape	Angle
Processing method	Solder	Cable shape	Loose Wires	Hood	Plastic
Hood screw	M2.6 Screw Lock	CN1	Female	Number of cores	40
Cable Rated Voltage(V)	300	Cable Standard (UL / CSA)	UL / CSA	AWG	24
Remark	Please see the catalog for more information on mating surface and wiring direction.